Since this plugin uses a bitmask to represent bands, we have
to be wary of shifting outside the precision of the bitmask
storage type. In this case, it was possible to generate 1 << 31
in a signed integer type as an intermediate step of B3G_FLAG,
which is undefined behavior (and usually results in INT_MIN,
breaking comparisons with the value).
Bug was reported to the chromium tracker at crbug.com/1019301
Original patch updated by Aleksander Morgado to leave
MM_MODEM_BAND_TELIT_3G_LAST as MM_MODEM_BAND_UTRAN_19, as that is the
highest 3G band supported by the current implementation. Worth noting
that this was not a real bug as the maximum flag we would have been
setting was (1 << 19) anyway.
It was observed that sporadically it may take more than 5 seconds for modem to
respond to AT#REBOOT. Increase the timeout on AT command to not report
unnecessary errors to the user.
The SIM7600E ends up emitting these URCs with too many <CR>s, and the
generic +CRING handler doesn't catch them, interfering with other
actions, e.g.:
$ sudo mmcli --call 1 --accept
error: couldn't accept the call: 'GDBus.Error:org.freedesktop.ModemManager1.Error.Core.Failed: Couldn't accept the call: Unhandled response '+CRING: VOICE
+CRING: VOICE''
Just processing and parsing them for now, so that they don't interfere
with other commands:
$ sudo mmcli --call 1 --accept
error: couldn't accept the call: 'GDBus.Error:org.freedesktop.ModemManager1.Error.Core.Failed: Couldn't accept the call: Unhandled response '
VOICE CALL: BEGIN''
We will explicitly query for +AUTOCSQ and +CNSMOD support before
trying to enable them.
If +AUTOCSQ is supported and correctly enabled, we'll request signal
quality polling to be disabled.
If +CNSMOD is supported and correctly enabled, we'll request access
technology polling to be disabled.
The +AUTOCSQ setup enables automatic signal quality reporting via +CSQ
URCs, which unfortunately have the same format as the +CSQ command
responses.
Therefore, we need to subclass load_signal_quality() explicitly in
order to ignore those cases where the response to the +CSQ command is
received empty (already processed as a URC).
The logic to setup the generic +CIND indications in the SIM7600E seems
to end up breaking connectivity when in TTY+PPP mode. If we issue the
AT+CMER=3,0,0,1 command, this will end up in the modem not replying a
correct CONNECT response to the ATD command.
Let's disable these +CIND indications completely in the simtech
plugin, as there is even no AT command reference saying those are
supported.
Fixes https://gitlab.freedesktop.org/mobile-broadband/ModemManager/issues/144
And added support for several new things, including:
* Setting "any" band now attempts to set all supported bands.
* Added new 2G band value '5' (egsm+dcs+pcs+g850).
* Setup support for two different 3G band combinations, a default one
plus an alternate one applicable to the LM940/960 models only. The
alternate combination is selected via udev tags.
During the refactor, the following Telit-specific helpers were also
removed and exchanged with more generic counterparts.
* mm_telit_bands_contains() -> mm_common_bands_garray_lookup()
* mm_telit_get_band_flags_from_string() -> mm_parse_uint_list()
From 5s to 20s, as it seems it could take much more to complete and
get a response, as seen in the logs below.
<debug> [1568553228.546862] (ttyUSB3): --> 'AT+CNSMOD=1<CR>'
<debug> [1568553233.799470] (ttyUSB3): --> 'AT+AUTOCSQ=1,1<CR>'
<debug> [1568553238.798866] (ttyUSB3) setting up 3GPP unsolicited registration messages handlers
<debug> [1568553238.798932] (ttyUSB2) setting up 3GPP unsolicited registration messages handlers
<debug> [1568553238.798990] (ttyUSB3) device open count is 1 (close)
<warn> [1568553238.799029] (tty/ttyUSB3) at port timed out 2 consecutive times
<debug> [1568553238.799094] (ttyUSB3) device open count is 2 (open)
<debug> [1568553238.799148] (ttyUSB3): --> 'AT+CREG=2<CR>'
<warn> [1568553241.798727] (tty/ttyUSB3) at port timed out 3 consecutive times
<debug> [1568553241.798799] (ttyUSB3): --> 'AT+CREG=1<CR>'
<debug> [1568553244.795389] Enabling unsolicited registration events in primary port failed: 'AT sequence failed'
<debug> [1568553244.795462] (ttyUSB2) device open count is 2 (open)
<debug> [1568553244.795507] (ttyUSB3) device open count is 1 (close)
<warn> [1568553244.795545] (tty/ttyUSB3) at port timed out 4 consecutive times
<debug> [1568553244.795588] (ttyUSB2): --> 'AT+CREG=2<CR>'
<debug> [1568553244.800815] (ttyUSB3): <-- '<CR><LF>OK<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1568553244.801624] (ttyUSB3): <-- '<CR><LF>OK<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1568553244.808710] (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
