The mm_base_modem_grab_port() now receives a MMKernelDevice directly from the
plugin, which is then stored in the MMPort corresponding to the port.
This means that we have direct access to e.g. all properties set by udev rules
everywhere, and we don't need additional GUdevClient objects (e.g. like the one
used in the Huawei plugin to detect NDISDUP support during runtime).
For virtual ports (e.g. generated during unit tests), we have a new 'generic'
kernel device object which just provides the values from the kernel device
properties given during its creation.
Instead of relying constantly on GUdevDevice objects reported by GUdev, we now
use a new generic object (MMKernelDevice) for which we provide an initial GUdev
based backend.
All ports of the same modem reported by the kernel will all be associated with
a common 'uid' (unique id), which uniquely identifies the physical device. This
logic was already in place, what we do now is avoid calling it the 'sysfs
path' of the physical device, because we may not want to use that to identify
a device.
This logic now also enables the possibility of "naming" the modems in a unique
way by setting the "ID_MM_PHYSDEV_UID" property in the "usb_device" that owns
all the ports.
E.g. a custom device has 4 modems in 4 different USB ports. The device path of
each USB device will always be the same, so the naming rules could go like this:
$ vim /usr/lib/udev/rules.d/78-mm-naming.rules
ACTION!="add|change|move", GOTO="mm_naming_rules_end"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-1"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-2"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.3", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-3"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.4", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-4"
LABEL="mm_naming_rules_end"
Each of the modems found will have a unique UID retrieved from the previous list
of rules. Then, "mmcli" has also been updated to allow using the UID instead of
the modem DBus path or index, e.g.:
$ sudo mmcli -m USB-MODEM-1
/org/freedesktop/ModemManager1/Modem/0 (device id '988d83252c0598f670c2d69d5f41e077204a92fd')
-------------------------
Hardware | manufacturer: 'ZTE CORPORATION'
| model: 'MF637'
| revision: 'BD_W7P673A3F3V1.0.0B04'
| supported: 'gsm-umts'
| current: 'gsm-umts'
| equipment id: '356516027657837'
-------------------------
System | device: 'USB-MODEM-1'
| drivers: 'option'
| plugin: 'ZTE'
| primary port: 'ttyUSB5'
| ports: 'ttyUSB5 (at)'
...
$ sudo mmcli -m USB-MODEM-1 --enable
...
Commit 7ff57f9808 introduced a change to try to
use ATTRS{bInterfaceNumber} as a common way to match by interface number, but
this logic is broken because all the rules that we use to match by interface
number (attribute in the interface device) also require matching by idVendor
and idProduct (attributes in the physdev device), and udev rules forbid matches
from more than one parent device at a time.
We could use ATTR{bInterfaceNumber} (instead of ATTRS) to tag the actual USB
interface device, but that would require a change in all the plugins to look for
the tag not in the TTY device, but in its parent.
So, recover the original behavior, where a hidden property is created containing
the first bInterfaceNumber found in the list of parent devices, and then run
the matches against idVendor and idProduct only if the hidden property is found
with the expected value.
Rules with a single condition where a parent property is checked with != don't
work properly. E.g.:
SUBSYSTEMS!="usb", GOTO="end"
or:
ATTRS{idVendor}!="abcd", GOTO="end"
Instead, we can mix both those previous parent rules and match them:
SUBSYSTEMS=="usb",ATTRS{idVendor}=="abcd", GOTO="next"
GOTO="end"
LABEL="next"
# Apply rules here
LABEL="end"
In this case both SUBSYSTEMS and ATTRS conditions apply to the parent usb_device
(idVendor attribute is only available in the usb_device), so they apply to all
ports of the same device.
This patch makes declarations bind to definitions within the same module
to prevent the potential ambiguity if referenced directly.
AddressSanitizer think they violated one definition rule, although
those symbols are accessed by address through their modules and do
not depend on the order of the libararies loaded.
We now have a single 'CurrentModes' property which contains both values in a
tuple with signature "(uu)".
Also, rename 'SetAllowedModes()' to 'SetCurrentModes()', and update the list of
arguments expected to have a single "(uu)" tuple.
NM attempts to set allowed and preferred mode during the connection
process. The plugin x220x does not handle properly when NM request
allowed mode to '2g, 3g' and the preferred mode to 'none'.
This commit attempts to solve the problem described above. When this
situation happens, establish the mode of the modem has 'ANY' (which
seems the safest one) instead of just throwing an error.
Signed-off-by: David Castellanos <dcastellanos@indra.es>
When the serial port buffer gets full of non-AT garbage during port probing,
we were re-scheduling the next probing step, which is completely wrong, as we
then would be processing the same probing task twice. If we get a buffer full,
just cancel the AT probing cancellable, which would cancel not only the possible
AT probings, but also the custom init if there is any.
Also, make sure that the custom_init() of the plugins out there don't return an
error if the GCancellable is cancelled. Cancelling the GCancellable means we
should just stop the custom_init(), and actually sending an error in
custom_init() means that the port should be set as unsupported by the plugin, so
completely different things.
Should fix https://bugzilla.gnome.org/show_bug.cgi?id=696695
If the rules to tag specific USB interface numbers only apply on the PID, we'll
end up seeing that if the port has a parent with another PID, and that other
PID also has a rule, port will get tagged multiple times. Easier to see with an
example:
The ZTE MF637 (VID 0x19D2, PID 0x0121) had the following rules:
ATTRS{idProduct}=="0121", ENV{.MM_USBIFNUM}=="04", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
ATTRS{idProduct}=="0121", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
In our ZTE rules we also have some for the device with PID 0x0002, like:
ATTRS{idProduct}=="0002", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
ATTRS{idProduct}=="0002", ENV{.MM_USBIFNUM}=="04", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
And it seems that we can grab multiple PIDs from a single port, i.e. from the
parent objects in the hierarchy:
udevadm info -a -n /dev/ttyUSB4 | grep idProduct
ATTRS{idProduct}=="0121"
ATTRS{idProduct}=="0020"
ATTRS{idProduct}=="0002"
Where that 0x0002 idProduct is not from the modem, but from the EHCI Host
Controller (with idVendor 0x1d6b in my case).
So... we end up seeing that both set of rules will apply to the ports, and we
misleadingly get:
(ttyUSB3) type 'at' claimed by /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2
ZTE: AT port 'tty/ttyUSB2' flagged as primary
(ttyUSB2) type 'at' claimed by /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2
ZTE: AT port 'tty/ttyUSB1' flagged as secondary
(ttyUSB1) type 'at' claimed by /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2
ZTE: AT port 'tty/ttyUSB4' flagged as primary
b_port(): (ttyUSB4) type 'at' claimed by /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2
(/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2) tty/ttyUSB2 at (primary)
(/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2) tty/ttyUSB1 at (secondary)
(/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2) tty/ttyUSB2 data (primary)
(/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2) tty/ttyUSB0 qcdm
Which is wrong, as ttyUSB4 should have been our primary port, not ttyUSB2.
With this patch on, the rules apply only to the VID/PID pair, and we end up
getting what we really wanted:
(ttyUSB3) type 'at' claimed by /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2
(ttyUSB2) type 'at' claimed by /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2
ZTE: AT port 'tty/ttyUSB1' flagged as secondary
(ttyUSB1) type 'at' claimed by /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2
ZTE: AT port 'tty/ttyUSB4' flagged as primary
b_port(): (ttyUSB4) type 'at' claimed by /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2
(/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2) tty/ttyUSB4 at (primary)
(/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2) tty/ttyUSB1 at (secondary)
(/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2) tty/ttyUSB4 data (primary)
(/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2) tty/ttyUSB0 qcdm
https://bugzilla.gnome.org/show_bug.cgi?id=694759
We will not report 'CS' as a supported mode every time '2G' is supported. This
actually was forcing all plugins to handle a 'CS' fallback when they didn't have
CS-specific mode setup. So, to simplify things, we will only report 'CS' as
supported for those plugins which actually allow to select 'CS' mode (e.g. the
'wavecom' plugin).
Both the ModemManager daemon and the mmcli will now include `libmm-glib.h' only.
We also handle two new special `_LIBMM_INSIDE_MM' and `LIBMM_INSIDE_MMCLI'
symbols, which if included before the `libmm-glib.h' library allow us to:
* Don't include the libmm-glib high level API in the ModemManager daemon, as
the object names would clash with those in the core.
* Define some of the methods of helper objects to be included only if compiling
ModemManager daemon or the mmcli.
Different ports of the same modem may get handled by different drivers. We
therefore need to provide a list of drivers (new `Modem.Drivers' property with
signature 'as') instead of just one (removed `Modem.Driver' property with
signature 's').
$ sudo mmcli -m 0 | grep drivers
| drivers: 'qcserial, qmi_wwan'
