Aleksander Morgado
78d19c10ba
quectel,shared: port GPS enabling to use AT sequence
2020-06-29 08:53:00 +00:00
Aleksander Morgado
bbca65d682
quectel,shared: skip QGPS? check after enabling/disabling failures
...
If any enabling/disabling command fails, we consider the operation
failed, regardless of the QGPS status. This is because e.g. enabling
involves more operations than just QGPS=1, and so we should treat a
failure in the command sequence as a failure in the whole operation.
2020-06-29 08:53:00 +00:00
Aleksander Morgado
538ed3f24e
quectel,shared: don't report GPS capabilities if no GPS port found
...
The QGPS based implementation needs the existence of a port flagged as
GPS data; if there is no such port, we cannot provide GPS support.
2020-06-29 08:53:00 +00:00
Aleksander Morgado
77f6637750
quectel,shared: fix reporting supported location capabilities
...
The method that reports what location capabilities are supported must
report the capabilities provided by the parent interface plus the
additional capabilities supported by the shared implementation.
Also, simplify the logic a bit reducing the amount of implemented
methods.
2020-06-29 08:53:00 +00:00
Aleksander Morgado
0f9d69fd35
quectel,shared: private context at beginning of source file
2020-06-29 08:53:00 +00:00
Aleksander Morgado
234ba4544b
quectel: coding style fixes in the QGPS logic
2020-06-29 08:53:00 +00:00
Aleksander Morgado
5a9d321346
quectel,shared: fix parent location disabling
...
The GTask must be passed as user_data.
2020-06-29 08:53:00 +00:00
ArenM
df393df147
quectel: implement GPS support with +QGPS
...
Quectel modems allow provide location information via AT commands.
Add this as a location source.
2020-06-29 08:53:00 +00:00
Brendan Peter
cb8d810583
quectel: add port type hints for EG95
2020-06-16 09:16:28 +02:00
Teijo Kinnunen
d98597e430
quectel: Check SIM swap after "+QUSIM: 1" URC
...
Quectel emits "+QUSIM: 1" after eUICC reinitialization. Detect it
and perform SIM swap check if one is encountered.
The motivation here is that M2M eUICC profile switch causes eUICC
reset and this is one way to detect and handle profile switches
properly on Quectel modems. The existing SIM hot swap mechanism is
used as it appears to be suitable for handling profile switches as
well as physical swapping of SIM cards.
2020-04-17 07:45:47 +00:00
Aleksander Morgado
8722215f7e
plugins: use logging module name as plugin name
2020-04-08 17:53:42 +02:00
Aleksander Morgado
e623a54d27
quectel: port to use object logging
2020-04-08 16:35:09 +02:00
mozzwald
a309b089c9
quectel: add port type hints for EC25/EG25 #194
2020-03-25 12:35:41 -05:00
Sven Schwermer
da729943b1
quectel: Add port type hints for BG96
...
Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com >
2019-10-30 11:22:19 +01:00
Sven Schwermer
9e63037c5a
quectel: Fix port type hints for EG91
...
Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com >
2019-10-30 11:15:23 +01:00
Aleksander Morgado
b954f4760a
quectel: allow tty-only devices
2019-08-29 17:36:06 +00:00
Sven Schwermer
c61bd846f3
quectel: Add port type hints for the Quectel EG91
...
Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com >
2019-08-01 16:23:36 +02:00
Aleksander Morgado
8ec9789e3c
quectel: add port type hints for the Quectel LTE-A EG06
...
ttyUSB0 (if #0 ): QCDM/DIAG port
ttyUSB1 (if #1 ): GPS data port
ttyUSB2 (if #2 ): AT primary port
ttyUSB3 (if #3 ): AT secondary port
2019-05-30 17:28:13 +02:00
Aleksander Morgado
87712c27f5
api,firmware: MMModemFirmwareUpdateMethod as flags, not enum
...
Devices may require/support more than one update method, so instead of
reporting the method as a single enum value, use a set of flags
instead.
2019-01-03 18:53:52 +00:00
Aleksander Morgado
fc02b1320c
quectel: report fastboot-based firmware update method and settings
...
We'll check for AT+QFASTBOOT support during runtime.
2019-01-03 18:53:52 +00:00
Aleksander Morgado
d5684ff391
quectel: new plugin
...
For now just creating generic QMI/AT capable modems.
2017-12-05 10:55:24 +01:00
