Dan Williams
a98fa8a4b3
qcdm: fix up CDMA Status command fields and values
...
Found in two sources:
a) Руководство пользования тестером CDMA-450
b) RTManager
2010-03-29 00:08:46 -07:00
Dan Williams
98e8108ac2
qcdm: update CM subsys system modes
2010-03-28 23:39:19 -07:00
Dan Williams
4d426ebbbd
gsm: only set auto registration if the modem isn't idle (related: bgo #591047 )
...
Some modems (Huawei E1552) appear to have problems with auto registration
in some circumstances that we don't yet fully understand, such that when
AT+COPS=0 is sent they never end up registering with the correct network.
As a minor workaround, if the modem is already registered with a provider
and the user hasn't specified manual registration, don't set auto
registration but let the modem figure it out itself.
See (bgo #591047 ) for more details.
2010-03-28 09:30:16 -07:00
Dan Williams
fe69ab4210
huawei: ensure modem ports get claimed even if probe fails
...
Previously there was an issue where if the probe failed, because
we can't really probe huawei secondary ports for various reasons,
the Generic plugin would eventually come around and try actively
probing the secondary port after the Huawei plugin said "I don't
support this port". Which resulted (potentially) in two MMModem
objects for the same device (one driven by Huawei, the other by
Generic).
2010-03-28 09:12:17 -07:00
Dan Williams
b876182fe6
zte: implement GSM solicited access technology request
2010-03-26 01:27:49 -07:00
Dan Williams
23986f8b0e
huawei: implement GSM solicited access technology request
2010-03-26 01:15:20 -07:00
Dan Williams
a50708dbea
sierra: implement GSM solicited access technology request
2010-03-26 00:27:30 -07:00
Dan Williams
3d12055818
gsm: ensure solicited access technology is valid before using it
2010-03-26 00:16:24 -07:00
Dan Williams
843a772b4c
option/hso: implement solicited access technology request
2010-03-26 00:14:47 -07:00
Dan Williams
a83dcdba8a
gsm: update access technology on successful registration
2010-03-26 00:14:23 -07:00
Dan Williams
4dbc2f2e9b
gsm: fix wrong comparison
...
Bug didn't have much of an effect, but should be fixed anyway.
2010-03-25 13:47:30 -07:00
Dan Williams
0b9c173fe9
core: assume +CPIN "READY" response indicates GSM capability (rh #573510 )
...
Assume (for now) that devices that respond to AT+CPIN without an
error are GSM devices. This may not be 100% true as some devices
in Asia (where CDMA devices use RUIMs which are basically SIMs) support
+CPIN for unlocking the RUIM, but since CDMA devices more consistently
implement AT+GCAP and ATI than we should be safe for a while.
2010-03-23 14:37:01 -07:00
Dan Williams
e7d1e4adb9
cdma: use DM Call Manager for registration status if available
...
This should solve problems with users who's providers are EVDO
only and thus the device isn't in 1X mode, but who's modems
don't set anything meaningful for CAD or CSS when the 1X radio
isn't registered. Previously, MM would just spin thinking it
wasn't registered when trying to connect.
This was mostly found with AnyDATA, Huawei, and some ZTE devices
from Russia and India.
2010-03-23 02:10:58 -07:00
Dan Williams
bcfb75d88d
core: grab probed QCDM ports for plugins where they are useful
2010-03-23 01:36:00 -07:00
Dan Williams
c36aacee0a
qcdm: use tcsetattr/tcgetattr for better compatibility
...
With Alpha, mainly.
2010-03-22 22:28:36 -07:00
Dan Williams
76130862ed
core: cleanly disable modems on shutdown
2010-03-22 15:41:14 -07:00
Dan Williams
9e8a0fda9f
option/hso: ensure unsolicited messages get turned off on disable
2010-03-22 15:05:45 -07:00
Dan Williams
7a5ba2e099
option/hso: make use of unsolicited access technology signals
2010-03-22 15:03:58 -07:00
Dan Williams
282ba6561e
gsm: fix argument validation in SetAllowedMode
2010-03-22 14:56:47 -07:00
Dan Williams
6ab36bacf3
qcdm: add ZTE signal strength request
2010-03-22 13:03:53 -07:00
Dan Williams
7fbe4d8383
cdma: check SPSERVICE and SPERI when getting registration state
2010-03-22 00:28:21 -07:00
Dan Williams
3b32e2a679
cdma: check for +SPSERVICE and $SPERI
...
Which are Sprint-specific commands which appear to be implemented by
various phones for getting access technology and roaming status.
2010-03-21 17:50:45 -07:00
Dan Williams
6598d2ef7f
core: parse the right thing on QCDM version info response
2010-03-21 17:48:19 -07:00
Dan Williams
96f5400cc9
core: fix error when unescaping QCDM packet fails
2010-03-21 17:47:15 -07:00
Dan Williams
f3e660444c
core: fix 64-bit build error in QCDM packet decapsulation
2010-03-20 00:58:14 -07:00
Dan Williams
88c1423838
qcdm: clarify note about CM state vs. roam/mode pref values
2010-03-20 03:53:44 -07:00
Dan Williams
c03556f820
qcdm: fix up testcase output
2010-03-20 03:53:31 -07:00
Dan Williams
2e62a2e0a6
core: probe ports for QCDM capability too
2010-03-20 03:39:10 -07:00
Dan Williams
418ba174dc
qcdm: fix decapsulation buffer size calculation
2010-03-20 03:38:54 -07:00
Dan Williams
ff2182fe1d
core: let partial serial responses be consumed by the handlers
2010-03-20 02:57:33 -07:00
Dan Williams
4006ca4dec
qcdm: better checking of NV read/write command results
2010-03-20 02:28:01 -07:00
Dan Williams
c4a1a78c43
qcdm: complete mode preference implementation
2010-03-20 00:09:38 -07:00
Dan Williams
26c1402aae
qcdm: add initial roaming and mode preference bits
2010-03-19 19:18:02 -07:00
Dan Williams
5897d8f275
gsm: PIN2 doesn't block enabling either
...
Again, only required for various dialing features we don't deal with
yet.
2010-03-19 11:09:43 -07:00
Dan Williams
f5f388c7fd
gsm: use new callback info chain functions for simple status
2010-03-19 11:05:05 -07:00
Dan Williams
85fc71818e
core: have modem base class handle card information
2010-03-19 11:01:19 -07:00
Dan Williams
4558df894b
helpers: add generic response stripping function
2010-03-19 10:57:01 -07:00
Dan Williams
6ca5765eb6
core: add chaining helper functions to callback info
...
Helpful when chaining a number of commands together when you want
to schedule the callback info only after all of them complete.
2010-03-19 10:54:10 -07:00
Dan Williams
bb62cfe07a
core: add base location API implementation
2010-03-18 18:08:23 -07:00
Dan Williams
1df244f307
api: fix syntax error
2010-03-18 08:47:14 -07:00
Dan Williams
fb2b80f11a
serial: flush I/O right after open
...
We don't really care about anything that came before.
2010-03-17 12:05:31 -07:00
Michael Biebl
857dcd7bcf
serial: use termios instead of old terminal ioctls
...
Makes sure we build on Alpha, plus the right thing to do.
2010-03-17 11:59:29 -07:00
Dan Williams
0815597d8d
qcdm: fix command buffer initialization
...
Use the right buffer size to initialize.
2010-03-17 00:40:13 -07:00
Dan Williams
d7a0ad7686
gsm: implement roaming triggers
2010-03-16 22:44:09 -07:00
Dan Williams
2c65e0ceaa
gsm: ignore SIM-PUK2 unlock required
...
Device is functional without it; it's only required for stuff
we don't do yet.
2010-03-16 17:19:21 -07:00
Dan Williams
79bca53f21
cdma: simplify finding the right serial port for commands
2010-03-16 17:03:55 -07:00
Dan Williams
6266f949ba
gsm: fix operator name on Option devices with UCS2 charset
2010-03-16 16:45:32 -07:00
Dan Williams
c18dfa67d8
gsm: turn off unsolicited messages on disable
2010-03-16 15:53:09 -07:00
Dan Williams
bdefdac2dc
hso: add allowed mode and unsolicited response handling
2010-03-16 15:51:27 -07:00
Dan Williams
ad9fe9da28
option: generalize common Option/HSO mode and unsolicited response handling
2010-03-16 15:50:58 -07:00
