We keep the pflags input in mm_base_modem_grab_port() so that plugins
can use other methods to gather port type hints (e.g. querying with AT
commands as in Huawei/Telit or looking at sysfs properties as in HSO).
For standard udev tag port type hints, it will be the base modem
looking them up.
Note that there is no longer any need to ignore non-flagged ports for
those modems that require primary/secondary flags. They will be
implicitly ignored when mm_base_modem_organize_ports() decides which
ports to use, as the flagged ones are preferred over the non-flagged
ones.
We define 3 common udev tag ids to be used by all plugins:
* ID_MM_PORT_TYPE_AT_PRIMARY: the primary modem port. It will be used
for AT control and also as PPP if there is no other port flagged
explicitly to do PPP.
* ID_MM_PORT_TYPE_AT_SECONDARY: the secondary modem port. It will be
used when/if the primary port gets connected to do PPP.
* ID_MM_PORT_TYPE_PPP: the port to be used to do PPP only. This tag
makes sense only when the primary port shouldn't be used for PPP,
i.e. when there is a port dedicated to do PPP and one port
dedicated for control.
When a new USB device is hotplugged, e.g. a USB<->RS232 converter that
exposes a single ttyUSB0, these udev events happen:
add /devices/pci0000:00/0000:00:14.0/usb2/2-1 (usb/usb-device)
add /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0 (usb/usb-interface)
add /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/ttyUSB0 (usb-serial)
add /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/ttyUSB0/tty/ttyUSB0 (tty)
bind /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/ttyUSB0 (usb-serial)
bind /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0 (usb/usb-interface)
bind /devices/pci0000:00/0000:00:14.0/usb2/2-1 (usb/usb-device)
Our udev rules in MM only added tags in the 'add' events, and it looks
like the only ones 'persistent' after this sequence are those of the
last event happening on the specific path.
This meant that all TTY subsystem rules (e.g. ID_MM_CANDIDATE) would
be stored for later check (e.g. if ModemManager is started after these
rules have been applied), which was ok. "udevadm info -p ..." would
show these tags correctly always.
But this also meant that the 'bind' udev event happening for the USB
device didn't get any of our device-specific tags, and so we would be
missing them (e.g. ID_MM_DEVICE_MANUAL_SCAN_ONLY) if MM is started
after the last event has happened. "udevadm info -p ..." would
not show these tags.
Modify all our rules to also run at the 'bind' events.
See, for context:
https://github.com/systemd/systemd/issues/8221
g_free and g_object_unref are in form of `void (*)(gpointer)`, which
matches the GDestroyNotify signature. An explicit GDestroyNotify cast on
g_free and g_object_unref is thus not needed.
There are 2 main types of udev properties: device-specific and
port-specific.
The port-specific properties are set independently per port (e.g. port
type hints set per interface number for a given vid:pid).
The device-specific properties apply to all ports in the device. Some
of these properties are currently expected in the physical device
(e.g. ID_MM_PLATFORM_DRIVER_PROBE) while some others are expected in
each port (e.g. the plugin udev tag filters).
This patch tries to simplify the logic and just assume that the device
specific tags may be given in either the physical device or the port
device, by providing separate APIs to retrieve port-specific or
device-specific (global) properties. If the same tag is given in both
the device and the port, the one in the device takes preference.
For the generic backend, these new APIs are really useless, as all
device-specific and port-specific properties are always stored in the
port object themselves (there is no 'tree' of devices in the generic
backend, no 'physdev' device).
For the udev backend, though, there really is a difference, as the
tags may be set in port or device.
https://bugs.freedesktop.org/show_bug.cgi?id=100156
The mm_base_modem_grab_port() now receives a MMKernelDevice directly from the
plugin, which is then stored in the MMPort corresponding to the port.
This means that we have direct access to e.g. all properties set by udev rules
everywhere, and we don't need additional GUdevClient objects (e.g. like the one
used in the Huawei plugin to detect NDISDUP support during runtime).
For virtual ports (e.g. generated during unit tests), we have a new 'generic'
kernel device object which just provides the values from the kernel device
properties given during its creation.
Instead of relying constantly on GUdevDevice objects reported by GUdev, we now
use a new generic object (MMKernelDevice) for which we provide an initial GUdev
based backend.
All ports of the same modem reported by the kernel will all be associated with
a common 'uid' (unique id), which uniquely identifies the physical device. This
logic was already in place, what we do now is avoid calling it the 'sysfs
path' of the physical device, because we may not want to use that to identify
a device.
This logic now also enables the possibility of "naming" the modems in a unique
way by setting the "ID_MM_PHYSDEV_UID" property in the "usb_device" that owns
all the ports.
E.g. a custom device has 4 modems in 4 different USB ports. The device path of
each USB device will always be the same, so the naming rules could go like this:
$ vim /usr/lib/udev/rules.d/78-mm-naming.rules
ACTION!="add|change|move", GOTO="mm_naming_rules_end"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-1"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-2"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.3", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-3"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.4", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-4"
LABEL="mm_naming_rules_end"
Each of the modems found will have a unique UID retrieved from the previous list
of rules. Then, "mmcli" has also been updated to allow using the UID instead of
the modem DBus path or index, e.g.:
$ sudo mmcli -m USB-MODEM-1
/org/freedesktop/ModemManager1/Modem/0 (device id '988d83252c0598f670c2d69d5f41e077204a92fd')
-------------------------
Hardware | manufacturer: 'ZTE CORPORATION'
| model: 'MF637'
| revision: 'BD_W7P673A3F3V1.0.0B04'
| supported: 'gsm-umts'
| current: 'gsm-umts'
| equipment id: '356516027657837'
-------------------------
System | device: 'USB-MODEM-1'
| drivers: 'option'
| plugin: 'ZTE'
| primary port: 'ttyUSB5'
| ports: 'ttyUSB5 (at)'
...
$ sudo mmcli -m USB-MODEM-1 --enable
...
Commit 7ff57f9808 introduced a change to try to
use ATTRS{bInterfaceNumber} as a common way to match by interface number, but
this logic is broken because all the rules that we use to match by interface
number (attribute in the interface device) also require matching by idVendor
and idProduct (attributes in the physdev device), and udev rules forbid matches
from more than one parent device at a time.
We could use ATTR{bInterfaceNumber} (instead of ATTRS) to tag the actual USB
interface device, but that would require a change in all the plugins to look for
the tag not in the TTY device, but in its parent.
So, recover the original behavior, where a hidden property is created containing
the first bInterfaceNumber found in the list of parent devices, and then run
the matches against idVendor and idProduct only if the hidden property is found
with the expected value.
Rules with a single condition where a parent property is checked with != don't
work properly. E.g.:
SUBSYSTEMS!="usb", GOTO="end"
or:
ATTRS{idVendor}!="abcd", GOTO="end"
Instead, we can mix both those previous parent rules and match them:
SUBSYSTEMS=="usb",ATTRS{idVendor}=="abcd", GOTO="next"
GOTO="end"
LABEL="next"
# Apply rules here
LABEL="end"
In this case both SUBSYSTEMS and ATTRS conditions apply to the parent usb_device
(idVendor attribute is only available in the usb_device), so they apply to all
ports of the same device.
The rules were matched only against devices with an exact 'tty' subsystem, and
that means that we were not properly adding additional tags on e.g. wwan or
cdc-wdm devices.
This patch makes declarations bind to definitions within the same module
to prevent the potential ambiguity if referenced directly.
AddressSanitizer think they violated one definition rule, although
those symbols are accessed by address through their modules and do
not depend on the order of the libararies loaded.
The MF60 exposes a QMI+net pair, but they are unusable as the WDS service
returns error when e.g. launching a connection.
So, fallback to AT+PPP in this device.
We now have a single 'CurrentModes' property which contains both values in a
tuple with signature "(uu)".
Also, rename 'SetAllowedModes()' to 'SetCurrentModes()', and update the list of
arguments expected to have a single "(uu)" tuple.
CDMA-only devices don't support +ZPAS for access tech loading, so chain up to the
parent so we get the QCDM fallback access tech loading functions.
https://bugzilla.gnome.org/show_bug.cgi?id=698850
If the rules to tag specific USB interface numbers only apply on the PID, we'll
end up seeing that if the port has a parent with another PID, and that other
PID also has a rule, port will get tagged multiple times. Easier to see with an
example:
The ZTE MF637 (VID 0x19D2, PID 0x0121) had the following rules:
ATTRS{idProduct}=="0121", ENV{.MM_USBIFNUM}=="04", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
ATTRS{idProduct}=="0121", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
In our ZTE rules we also have some for the device with PID 0x0002, like:
ATTRS{idProduct}=="0002", ENV{.MM_USBIFNUM}=="02", ENV{ID_MM_ZTE_PORT_TYPE_MODEM}="1"
ATTRS{idProduct}=="0002", ENV{.MM_USBIFNUM}=="04", ENV{ID_MM_ZTE_PORT_TYPE_AUX}="1"
And it seems that we can grab multiple PIDs from a single port, i.e. from the
parent objects in the hierarchy:
udevadm info -a -n /dev/ttyUSB4 | grep idProduct
ATTRS{idProduct}=="0121"
ATTRS{idProduct}=="0020"
ATTRS{idProduct}=="0002"
Where that 0x0002 idProduct is not from the modem, but from the EHCI Host
Controller (with idVendor 0x1d6b in my case).
So... we end up seeing that both set of rules will apply to the ports, and we
misleadingly get:
(ttyUSB3) type 'at' claimed by /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2
ZTE: AT port 'tty/ttyUSB2' flagged as primary
(ttyUSB2) type 'at' claimed by /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2
ZTE: AT port 'tty/ttyUSB1' flagged as secondary
(ttyUSB1) type 'at' claimed by /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2
ZTE: AT port 'tty/ttyUSB4' flagged as primary
b_port(): (ttyUSB4) type 'at' claimed by /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2
(/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2) tty/ttyUSB2 at (primary)
(/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2) tty/ttyUSB1 at (secondary)
(/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2) tty/ttyUSB2 data (primary)
(/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2) tty/ttyUSB0 qcdm
Which is wrong, as ttyUSB4 should have been our primary port, not ttyUSB2.
With this patch on, the rules apply only to the VID/PID pair, and we end up
getting what we really wanted:
(ttyUSB3) type 'at' claimed by /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2
(ttyUSB2) type 'at' claimed by /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2
ZTE: AT port 'tty/ttyUSB1' flagged as secondary
(ttyUSB1) type 'at' claimed by /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2
ZTE: AT port 'tty/ttyUSB4' flagged as primary
b_port(): (ttyUSB4) type 'at' claimed by /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2
(/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2) tty/ttyUSB4 at (primary)
(/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2) tty/ttyUSB1 at (secondary)
(/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2) tty/ttyUSB4 data (primary)
(/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2) tty/ttyUSB0 qcdm
https://bugzilla.gnome.org/show_bug.cgi?id=694759
Plain non-Icera ZTE modems will use ATD calls and PPP to establish the
connection, so ignore 'net' ports that may be found in the way (e.g. when the
modem is a QMI modem and we're not using QMI support).
