g_free and g_object_unref are in form of `void (*)(gpointer)`, which
matches the GDestroyNotify signature. An explicit GDestroyNotify cast on
g_free and g_object_unref is thus not needed.
A default implementation to monitor the ongoing connection is provided in the
generic MMBroadbandModem, based on AT+CGACT? to check whether the PDP context
of the connection (identified by the cached cid) is active or not.
This commit also disables the connection monitoring logic in those plugins that
have custom connection methods.
All ports of the same modem reported by the kernel will all be associated with
a common 'uid' (unique id), which uniquely identifies the physical device. This
logic was already in place, what we do now is avoid calling it the 'sysfs
path' of the physical device, because we may not want to use that to identify
a device.
This logic now also enables the possibility of "naming" the modems in a unique
way by setting the "ID_MM_PHYSDEV_UID" property in the "usb_device" that owns
all the ports.
E.g. a custom device has 4 modems in 4 different USB ports. The device path of
each USB device will always be the same, so the naming rules could go like this:
$ vim /usr/lib/udev/rules.d/78-mm-naming.rules
ACTION!="add|change|move", GOTO="mm_naming_rules_end"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-1"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-2"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.3", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-3"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.4", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-4"
LABEL="mm_naming_rules_end"
Each of the modems found will have a unique UID retrieved from the previous list
of rules. Then, "mmcli" has also been updated to allow using the UID instead of
the modem DBus path or index, e.g.:
$ sudo mmcli -m USB-MODEM-1
/org/freedesktop/ModemManager1/Modem/0 (device id '988d83252c0598f670c2d69d5f41e077204a92fd')
-------------------------
Hardware | manufacturer: 'ZTE CORPORATION'
| model: 'MF637'
| revision: 'BD_W7P673A3F3V1.0.0B04'
| supported: 'gsm-umts'
| current: 'gsm-umts'
| equipment id: '356516027657837'
-------------------------
System | device: 'USB-MODEM-1'
| drivers: 'option'
| plugin: 'ZTE'
| primary port: 'ttyUSB5'
| ports: 'ttyUSB5 (at)'
...
$ sudo mmcli -m USB-MODEM-1 --enable
...
This patch makes declarations bind to definitions within the same module
to prevent the potential ambiguity if referenced directly.
AddressSanitizer think they violated one definition rule, although
those symbols are accessed by address through their modules and do
not depend on the order of the libararies loaded.
The generic disconnection logic now already handles getting the port fully
closed and a wait time before reopening it, so no need for a custom
disconnection logic any more.
Instead of returning 3 variables in connect_finish(), return a single reference
counted struct. This simplifies how the result is built and passed within a
GSimpleAsyncResult to each _finish() method.
This also simplifies the dialling step in the 3GPP connection sequence, as we
can use the same new type.
Instead of a custom modem_init() step in the 'Modem' interface, just add a
sequence of port initialization commands in each port.
While enabling for the first time a non-hotplugged modem, we will issue the
port initialization commands only after having run the enabling_modem_init()
step (i.e. after ATZ usually).
We previously had the modem initialization command merged with some other port
setup commands in the 'modem_init' step of the 'Modem' interface. Instead of
doing this, we now split the logic into two separate steps:
A first 'enabling_modem_init' modem initialization step is to be run just after
the ports have been opened, but only during the first enabling operation, and
only if the modem was not hotplugged. A hotplugged modem is assumed to be
properly initialized already, so no need to ATZ-it. Also, we will now wait 500ms
by default after the modem initialization command has been sent, to let it
settle down.
The second 'modem_init' step will be run during the 'Modem' interface
initialization, and it currently only holds specific setup of the primary and
secondary serial ports. We'll be modifying this logic a bit in the next commits,
so no big deal to have that step name unchanged.
Both the ModemManager daemon and the mmcli will now include `libmm-glib.h' only.
We also handle two new special `_LIBMM_INSIDE_MM' and `LIBMM_INSIDE_MMCLI'
symbols, which if included before the `libmm-glib.h' library allow us to:
* Don't include the libmm-glib high level API in the ModemManager daemon, as
the object names would clash with those in the core.
* Define some of the methods of helper objects to be included only if compiling
ModemManager daemon or the mmcli.
Instead of letting the plugins specify a default storage to use, just look at
the supported ones and use the best one.
"MT is preferred over "ME" or "SM", as "MT=ME+SM"
There is no point in specifying a default 'mem1' memory storage, which is used
for reading/listing/deleting, as those are operations that need a specific
'mem1' set each time.
Also, there is no point in specifying separate default 'mem2' and 'mem3' memory
storages, specially because now we allow Sms.Store() to specify a storage.
So, we will now only have a 'default' memory storage, which is applicable for
both 'mem2' and 'mem3' (storing, sending from storage and deleting).
Different ports of the same modem may get handled by different drivers. We
therefore need to provide a list of drivers (new `Modem.Drivers' property with
signature 'as') instead of just one (removed `Modem.Driver' property with
signature 's').
$ sudo mmcli -m 0 | grep drivers
| drivers: 'qcserial, qmi_wwan'
There's no real point in maintaining a separate `MMPlugin' interface, as all the
plugins will inherit from `MMPluginBase', so just merge them and simplify
everything.
Before this, we only exported the modem to DBus when all ports were organized,
in order to make sure that we select as primary port the one we really want and
not the first AT port grabbed. Given that to get all the ports organized we also
needed to wait to get all the ports grabbed, we can now also defer the creation
of the modem object until all the ports get grabbed. This allows us to create
different types of objects based on the ports available (e.g. we can now create
QMI-supported modem objects if we see a QMI port around).
The base MMBearer object will receive the MMBearerProperties configuration,
which contains every generic and plugin-specific set up. Not every configuration
parameter will be used by every implementation (e.g. not every bearer needs
user/password).
The Bearer object will expose every configuration parameter received in its
`Properties' property in the interface, even if it's not really used.
Instead of the `_in_port()' variants, we'll provide more generic
`_full()' methods. These should be used either if we want to send commands
to a specific port, or if we want to use a specific user-provided GCancellable.
In addition to this user-provided GCancellable, we keep the internal modem-wide
one.
* mm_base_modem_peek_port_* () will return either a port object (no new
reference), or NULL if none available.
You would usually peek() a port if you're going to use it just in the current
method, as there is no way to that reference to get invalid (we're single
threaded).
* mm_base_modem_get_port_* () will return either NEW references to valid
port objects, or NULL if none available.
And, you would usually get() a port, whenever you want the port object to be
valid even out of the current method, for example when keeping it in the
context of an async operation.
Also, we need to consider that the primary AT port MAY BE NULL when you
peek() or get() it. This is due to the fact that we may be releasing ports
(due to device disconnection) in the middle of async operations.
Renamed `MMCommonBearerProperties' to `MMBearerProperties', and removed the
`MMBearerProperties' provided in libmm-glib. We'll just use the original one
from libmm-common always.
Renamed `MMCommonBearerIpConfig' to `MMBearerIpConfig', and removed the
`MMBearerIpConfig' provided in libmm-glib. We'll just use the original one
from libmm-common always.
