We want the SID/NID even when AT Serving System checks are disabled,
otherwise the SID/NID don't get filled at all. QCDM doesn't need the
SID/NID to determine registration, so the values are informational
only and don't affect registration state. But we still want to
export them via the API.
Some devices (usually CDMA modems like the Sierra MC5725 and others)
don't prefix their +CSQ replies with +CSQ. So don't require that.
The scanf() should ensure the reply is valid even without the +CSQ.
Sierra CDMA devices don't always have QCDM ports, or if they do,
they aren't always usable. Try Sierra-proprietary commands for
loading the modem's MDN and fall back to QCDM if that fails.
mm_get_int_from_str() does not allow anything in the string after the
number, eg "-91 asdfasdf" returns an error. So we have to chop off
anything after the number we're interested in.
Not many CDMA/EVDO-only modems support CNUM since it's not a
standard IS707/856 AT command, so for those that don't
support it and have a QCDM port, try grabbing the number from
NV memory.
When both load_power_state() and modem_power_down() are not implemented, the
logic will launch the power-up command during (only the first) enabling of the
modem.
In this kind of modems, CFUN is directly related to allowed/preferred modes, so
during the initial power-up we'll just assume we want ANY mode.
This logic is now implemented by the parent broadband modem object.
Also, implement a custom initial power state loading, so that CDMA-only modems
get marked as 'offline', in order to launch !pcstate=1 to power them up during
the first enabling. The custom initial power state loading will run the parent's
implementation in non-CDMA-only modems.
The logic to handle the lock information (current lock and unlock retry count)
wasn't handling all possible cases properly, e.g.:
* When PIN is incorrectly entered too many times, a SIM-PUK error may happen.
In this case we need to directly assume SIM-PUK is the current lock (some
modems, like Option HSO ones, would incorrectly reply SIM-PIN if CPIN? asked
just after the SIM-PUK error).
* After every operation acting in SIM locks, we need to update the current
unlock retry count.
This change tries to cover those cases, by:
* The logic to check current lock is extended to also load the unlock retry
count when needed.
* Whenever a SIM-PUK error happens in the SIM operations, we directly assume
that SIM-PUK is required, without re-asking CPIN?.
* The overall logic of lock checking is now handled by a state machine, which
is much easier to understand.
Specially the first time that CFUN=1,0 is issued after the initial power up, we
really need to wait more than 3s for the AT command reply. Otherwise, the modem
won't like it and it will reset itself :-/
Every port probing will have the Generic plugin as fallback, and due to some
other issues in other plugins (see ee099fcd), we need to allow overwriting the
suggested plugin from the Generic to a more specific one.
One of the drawbacks of this is that we're actually allowing the Generic plugin
to probe and accept the port, which means that the generic plugin may accept a
specific port type (e.g. QMI) while the specific plugin wouldn't. So, we will
now also run the subsystems filter before grabbing the specific port, in order
to really filter out those cases. We still keep the subsystems filter in
pre-probing, so that we build a better initial plugin list to probe.
If an error occurs early during the initialization (e.g. during port setup), we
would be aborting without even having exported the modem interface. So detect
that case and skip setting the modem as valid.
Plain non-Icera ZTE modems will use ATD calls and PPP to establish the
connection, so ignore 'net' ports that may be found in the way (e.g. when the
modem is a QMI modem and we're not using QMI support).
