The QCDM port commands are never cached, so remove the option from the command()
method. Will also simplify command caching afterwards as it will be an AT-only
thing.
The Novatel LTE modem only uses its primary AT port for AT commands.
Instead of referencing any existing secondary port, this patch changes
MMBroadbandBearerNovatelLte to explicitly use the primary port during the
connection and disconnection sequence.
Originally developed by:
Ben Chan <benchan@chromium.org>
This patch replaces mm_bearer_report_disconnection() with a more generic
mm_bearer_report_connection_status(), which allows reporting any
connection status of a bearer. This further allows getting rid of those
custom report_connection_status functions in plugic specific bearer
subclasses.
Note that while plugin-specific implementations can receive multiple
'MMBearerConnectionStatus' values, the generic implementation is only allowed
to receive DISCONNECTED. Plugins need to make sure that they process all the
other status values, and only report DISCONNECTED to the parent when required.
MBM:
The MBM bearer implementation of report_connection_status() expects either
CONNECTED or DISCONNECTED. If any of these is received and there is an ongoing
connection attempt, the corresponding operation will be completed. If there is
no connection attempt, we will just handle the DISCONNECTED state, calling the
parent method to notify that the modem got network-disconnected.
Icera:
The Icera bearer implementation of report_connection_status() expects either
CONNECTED, CONNECT FAILED or DISCONNECTED. If any of these is received and
there is an ongoing connection or disconnection attempt, the corresponding
operation will be completed. If there is no connection or disconnection
attempt, we will just handle the CONNECT FAILED and DISCONNECTED states,
calling the parent method (always with DISCONNECTED) to notify that the modem
got network-disconnected.
Option/HSO:
The Option/HSO bearer implementation of report_connection_status() expects
either CONNECTED, CONNECTION FAILED or DISCONNECTED. If any of these is
received and there is an ongoing connection or disconnection attempt, the
corresponding operation will be completed. If there is no connection or
disconnection attempt, we will just handle the CONNECTION FAILED and
DISCONNECTED states, calling the parent method (always with DISCONNECTED) to
notify that the modem got network-disconnected.
Huawei:
The Huawei bearer implementation of report_connection_status() expects either
CONNECTED or DISCONNECTED. These messages are not used to process pending
connection or disconnection attempts; so if they are received while one of
these is on-going, it will just be ignored. CONNECTED reports are also
ignored, so we will just handle the DISCONNECTED state, calling the parent
method to notify that the modem got network-disconnected.
Altair-LTE:
The Altair-LTE bearers will only report DISCONNECTED on network-disconnected
cases. There is no custom report_connection_status().
Novatel-LTE:
The Novatel-LTE bearers will only report DISCONNECTED on network-disconnected
cases. There is no custom report_connection_status().
We now have a single 'CurrentModes' property which contains both values in a
tuple with signature "(uu)".
Also, rename 'SetAllowedModes()' to 'SetCurrentModes()', and update the list of
arguments expected to have a single "(uu)" tuple.
This patch increases the number of retries, from 4 to 60, for connection
status check during a connection / disconnection request, which handles
some scenario when the connection / disconnection request takes more
than 5 seconds to complete.
This patches normalize a response for the AT$NWQMISTATUS command, by
replacing white-space characters with a space, before the response is
included in a DBus error message.
This patch fixes the following invalid comparison of unsigned expression:
novatel/mm-plugin-novatel.c:148:29: error: comparison of unsigned
expression >= 0 is always true [-Werror,-Wtautological-compare]
if (ctx->nwdmat_retries >= 0) {
~~~~~~~~~~~~~~~~~~~ ^ ~
Bug reported on https://code.google.com/p/chromium/issues/detail?id=242150
We filter the E362 because it's managed by the Novatel LTE plugin. If we also
filter out the USB551L, but it's not explicitly grabbed by any other plugin, it
will default to the Generic one.
The GetNetworkTime() response is defined to be an ISO8601 string, which
is in turn defined to be in local time. Make sure that's reflected in
the documentation, and append the timezone offset to UTC where we have
it.
Oddly, Icera devices return their time info in UTC with an offset to
the local timezone, so we have to jump through some hoops there to
convert the response to localtime based on the reported offset.
Some additional fixes by Aleksander Morgado <aleksander@lanedo.com>.
https://bugzilla.gnome.org/show_bug.cgi?id=697372
So do it during port probing. If we send this command early enough in the
first AT port being probed, it should flip the secondary ports to AT mode
before their port probing is finished.
https://bugzilla.gnome.org/show_bug.cgi?id=696696
Instead of deciding in advance which data port to use, we let the dialling
operation gather it. For the generic dialling logic, ATD-based, always an
'AT' port will be used as data port, even if we grabbed a 'net' port. Those
plugins that can work with 'net' ports will grab the specific 'net' port
themselves.
Instead of returning 3 variables in connect_finish(), return a single reference
counted struct. This simplifies how the result is built and passed within a
GSimpleAsyncResult to each _finish() method.
This also simplifies the dialling step in the 3GPP connection sequence, as we
can use the same new type.
We previously had the modem initialization command merged with some other port
setup commands in the 'modem_init' step of the 'Modem' interface. Instead of
doing this, we now split the logic into two separate steps:
A first 'enabling_modem_init' modem initialization step is to be run just after
the ports have been opened, but only during the first enabling operation, and
only if the modem was not hotplugged. A hotplugged modem is assumed to be
properly initialized already, so no need to ATZ-it. Also, we will now wait 500ms
by default after the modem initialization command has been sent, to let it
settle down.
The second 'modem_init' step will be run during the 'Modem' interface
initialization, and it currently only holds specific setup of the primary and
secondary serial ports. We'll be modifying this logic a bit in the next commits,
so no big deal to have that step name unchanged.
We use the Icon ID here because a value of 1 *always* means not roaming,
while the other values don't appear to be consistent. For example,
an ERI value of "0" is supposed to mean roaming according to the
standards, but the Novatel devices appear to use 0 to mean home.
Since we're not sure, don't depend on the ERI value itself, just
depend on the Icon ID, where we know for sure that 1 means "home".
$NWQMISTATUS sometimes returns 'ERROR'. This patch modifies the Novatel
LTE plugin to retry $NWQMISTATUS (up to 5 times) to determine if the
disconnect operation succeeds. It also changes the plugin to assume that
the disconnect operation succeeds if $NWQMISTATUS fails to report the
current connection status.
Soft resetting a Novatel LTE modem can a significant amount of time
(3-4 seconds). If the modem is newly plugged in, skip the unnecessary
soft reset when enabling the modem.
mm_get_int_from_str() does not allow anything in the string after the
number, eg "-91 asdfasdf" returns an error. So we have to chop off
anything after the number we're interested in.
+CNUM may return ERROR when the modem fails to read the own numbers from
the SIM card or when the SIM card hasn't been activated. Use $NWMDN to
read the MDN as a fallback, which distinguishes these two cases.
After repeated stress tests on a few Novatel E362 modems and SIM cards,
it is revealed that a 3-second wait after SIM unlock is necessary for
reliably reading ICCID and IMSI through the SIM interface.
The $NWQMISTATUS command sometimes replies an ERROR shortly after
calling the $NWQMICONNECT command, but then replies the proper QMI
status if we retry it. This behavior is observed on an E362 modem with
4.08 firmware.
(ttyUSB0): --> 'AT$NWQMICONNECT=,,,,,,"",,,"",""<CR>'
(ttyUSB0): <-- '<CR><LF>OK<CR><LF>'
(ttyUSB0): --> 'AT$NWQMISTATUS<CR>'
(ttyUSB0): <-- '<CR><LF>ERROR<CR><LF>'
Got failure code 100: Unknown error
QMI connection status failed: Unknown error
In firmware 4.08, the $NWQMISTATUS command returns different values for
QMI state to indicate the current connection state. This patch modifies
the code to handle $NWQMISTATUS responses in firmware 1.41 and 4.08.
Both the ModemManager daemon and the mmcli will now include `libmm-glib.h' only.
We also handle two new special `_LIBMM_INSIDE_MM' and `LIBMM_INSIDE_MMCLI'
symbols, which if included before the `libmm-glib.h' library allow us to:
* Don't include the libmm-glib high level API in the ModemManager daemon, as
the object names would clash with those in the core.
* Define some of the methods of helper objects to be included only if compiling
ModemManager daemon or the mmcli.
Instead of letting the plugins specify a default storage to use, just look at
the supported ones and use the best one.
"MT is preferred over "ME" or "SM", as "MT=ME+SM"
