Program received signal SIGSEGV, Segmentation fault.
strchr () at ../sysdeps/arm/armv6/strchr.S:28
28 ../sysdeps/arm/armv6/strchr.S: No such file or directory.
(gdb) bt
#0 strchr () at ../sysdeps/arm/armv6/strchr.S:28
#1 0x76b121c8 in g_param_spec_pool_lookup () from ~/buildroot/output/staging/lib/libgobject-2.0.so.0
#2 0x76b0cf44 in g_object_new_valist () from ~/buildroot/output/staging/lib/libgobject-2.0.so.0
#3 0x76b0d39c in g_object_new () from ~/buildroot/output/staging/lib/libgobject-2.0.so.0
#4 0x75f75e40 in mm_plugin_create () at ublox/mm-plugin-ublox.c:99
#5 0x00031550 in load_plugin (path=0xe9b68 "/usr/lib/ModemManager/libmm-plugin-ublox.so") at mm-plugin-manager.c:1521
#6 load_plugins (error=0x7efffa68, self=0xdc4f0) at mm-plugin-manager.c:1574
#7 initable_init (initable=<optimized out>, cancellable=<optimized out>, error=0x7efffa68) at mm-plugin-manager.c:1679
#8 0x76b9b278 in g_initable_new_valist () from ~/buildroot/output/staging/lib/libgio-2.0.so.0
#9 0x76b9b2e0 in g_initable_new () from ~/buildroot/output/staging/lib/libgio-2.0.so.0
#10 0x000324d0 in mm_plugin_manager_new (plugin_dir=0xe9c40 "/usr/lib/ModemManager", error=error@entry=0x7efffa68) at mm-plugin-manager.c:1620
#11 0x0002da08 in initable_init (initable=0xddb40, cancellable=<optimized out>, error=0x7efffa68) at mm-base-manager.c:1113
#12 0x76b9b278 in g_initable_new_valist () from ~/buildroot/output/staging/lib/libgio-2.0.so.0
#13 0x76b9b2e0 in g_initable_new () from ~/buildroot/output/staging/lib/libgio-2.0.so.0
#14 0x0002e81c in mm_base_manager_new (connection=connection@entry=0xe1070, plugin_dir=plugin_dir@entry=0x9efb0 "/usr/lib/ModemManager",
auto_scan=auto_scan@entry=1, initial_kernel_events=initial_kernel_events@entry=0x0, enable_test=0, error=0x7efffa68, error@entry=0x7efffa60)
at mm-base-manager.c:957
#15 0x0002b6ec in bus_acquired_cb (connection=0xe1070, name=<optimized out>, user_data=<optimized out>) at main.c:87
#16 0x76c26864 in connection_get_cb () from ~/buildroot/output/staging/lib/libgio-2.0.so.0
#17 0x76bc76cc in g_task_return_now () from ~/buildroot/output/staging/lib/libgio-2.0.so.0
#18 0x76bc7d50 in g_task_return () from
~/buildroot/output/staging/lib/libgio-2.0.so.0
See similar bug in GStreamer:
https://bugzilla.gnome.org/show_bug.cgi?id=740191
The Altair, Option HSO and Samsung plugins all use the send-delay=0
setting once the modem object has been created. For consistency, use
the same setting during port probing.
g_free and g_object_unref are in form of `void (*)(gpointer)`, which
matches the GDestroyNotify signature. An explicit GDestroyNotify cast on
g_free and g_object_unref is thus not needed.
The original g_udev_device_get_property_as_int() uses strtol() without
an explicit base (i.e. 0) so that the base is autodetected from the
string whenever possible (e.g. if prefixes with '0x' it is treated as a
hexadecimal string).
But, for ID_USB_INTERFACE_NUM, we explicitly require reading the number
as an hex string, even if we don't have any '0x' prefix.
Reported-by: Matthew Stanger <stangerm2@gmail.com>
A default implementation to monitor the ongoing connection is provided in the
generic MMBroadbandModem, based on AT+CGACT? to check whether the PDP context
of the connection (identified by the cached cid) is active or not.
This commit also disables the connection monitoring logic in those plugins that
have custom connection methods.
The mm_base_modem_grab_port() now receives a MMKernelDevice directly from the
plugin, which is then stored in the MMPort corresponding to the port.
This means that we have direct access to e.g. all properties set by udev rules
everywhere, and we don't need additional GUdevClient objects (e.g. like the one
used in the Huawei plugin to detect NDISDUP support during runtime).
For virtual ports (e.g. generated during unit tests), we have a new 'generic'
kernel device object which just provides the values from the kernel device
properties given during its creation.
Instead of relying constantly on GUdevDevice objects reported by GUdev, we now
use a new generic object (MMKernelDevice) for which we provide an initial GUdev
based backend.
All ports of the same modem reported by the kernel will all be associated with
a common 'uid' (unique id), which uniquely identifies the physical device. This
logic was already in place, what we do now is avoid calling it the 'sysfs
path' of the physical device, because we may not want to use that to identify
a device.
This logic now also enables the possibility of "naming" the modems in a unique
way by setting the "ID_MM_PHYSDEV_UID" property in the "usb_device" that owns
all the ports.
E.g. a custom device has 4 modems in 4 different USB ports. The device path of
each USB device will always be the same, so the naming rules could go like this:
$ vim /usr/lib/udev/rules.d/78-mm-naming.rules
ACTION!="add|change|move", GOTO="mm_naming_rules_end"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-1"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-2"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.3", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-3"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.4", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-4"
LABEL="mm_naming_rules_end"
Each of the modems found will have a unique UID retrieved from the previous list
of rules. Then, "mmcli" has also been updated to allow using the UID instead of
the modem DBus path or index, e.g.:
$ sudo mmcli -m USB-MODEM-1
/org/freedesktop/ModemManager1/Modem/0 (device id '988d83252c0598f670c2d69d5f41e077204a92fd')
-------------------------
Hardware | manufacturer: 'ZTE CORPORATION'
| model: 'MF637'
| revision: 'BD_W7P673A3F3V1.0.0B04'
| supported: 'gsm-umts'
| current: 'gsm-umts'
| equipment id: '356516027657837'
-------------------------
System | device: 'USB-MODEM-1'
| drivers: 'option'
| plugin: 'ZTE'
| primary port: 'ttyUSB5'
| ports: 'ttyUSB5 (at)'
...
$ sudo mmcli -m USB-MODEM-1 --enable
...
This patch makes declarations bind to definitions within the same module
to prevent the potential ambiguity if referenced directly.
AddressSanitizer think they violated one definition rule, although
those symbols are accessed by address through their modules and do
not depend on the order of the libararies loaded.
Subclasses may need to know which IP families were used for the setup
so they can return the correct IP configuration. We can't just use
the MMBearer default_ip_family becuase that isn't the family that
was actually used during the connection.
Originally developed by:
Ben Chan <benchan@chromium.org>
This patch replaces mm_bearer_report_disconnection() with a more generic
mm_bearer_report_connection_status(), which allows reporting any
connection status of a bearer. This further allows getting rid of those
custom report_connection_status functions in plugic specific bearer
subclasses.
Note that while plugin-specific implementations can receive multiple
'MMBearerConnectionStatus' values, the generic implementation is only allowed
to receive DISCONNECTED. Plugins need to make sure that they process all the
other status values, and only report DISCONNECTED to the parent when required.
MBM:
The MBM bearer implementation of report_connection_status() expects either
CONNECTED or DISCONNECTED. If any of these is received and there is an ongoing
connection attempt, the corresponding operation will be completed. If there is
no connection attempt, we will just handle the DISCONNECTED state, calling the
parent method to notify that the modem got network-disconnected.
Icera:
The Icera bearer implementation of report_connection_status() expects either
CONNECTED, CONNECT FAILED or DISCONNECTED. If any of these is received and
there is an ongoing connection or disconnection attempt, the corresponding
operation will be completed. If there is no connection or disconnection
attempt, we will just handle the CONNECT FAILED and DISCONNECTED states,
calling the parent method (always with DISCONNECTED) to notify that the modem
got network-disconnected.
Option/HSO:
The Option/HSO bearer implementation of report_connection_status() expects
either CONNECTED, CONNECTION FAILED or DISCONNECTED. If any of these is
received and there is an ongoing connection or disconnection attempt, the
corresponding operation will be completed. If there is no connection or
disconnection attempt, we will just handle the CONNECTION FAILED and
DISCONNECTED states, calling the parent method (always with DISCONNECTED) to
notify that the modem got network-disconnected.
Huawei:
The Huawei bearer implementation of report_connection_status() expects either
CONNECTED or DISCONNECTED. These messages are not used to process pending
connection or disconnection attempts; so if they are received while one of
these is on-going, it will just be ignored. CONNECTED reports are also
ignored, so we will just handle the DISCONNECTED state, calling the parent
method to notify that the modem got network-disconnected.
Altair-LTE:
The Altair-LTE bearers will only report DISCONNECTED on network-disconnected
cases. There is no custom report_connection_status().
Novatel-LTE:
The Novatel-LTE bearers will only report DISCONNECTED on network-disconnected
cases. There is no custom report_connection_status().
The modem doesn't give us a prefix in the OWANDATA response, but it's
always /32. This didn't get set previously because NetworkManager
always just used /32 for the 'static' configuration, but NM isn't the
only user of MM, and only MM knows for sure that the prefix should
be /32.
We now have a single 'CurrentModes' property which contains both values in a
tuple with signature "(uu)".
Also, rename 'SetAllowedModes()' to 'SetCurrentModes()', and update the list of
arguments expected to have a single "(uu)" tuple.
The probing logic expects either one or the other right now. In this case, it is
just simpler to include the Nozomi-related VID in the vendor filter, and remove
the product filter.
Instead of deciding in advance which data port to use, we let the dialling
operation gather it. For the generic dialling logic, ATD-based, always an
'AT' port will be used as data port, even if we grabbed a 'net' port. Those
plugins that can work with 'net' ports will grab the specific 'net' port
themselves.
If the primary port is gone (e.g. when going to sleep) and we are just in the
middle of a connection attempt, we won't be able to receive any unsolicited
message regarding the status of the attempt. So, if we detect that the port is
forced to get closed, we'll just treat it as a connection failure.
http://code.google.com/p/chromium-os/issues/detail?id=35391
The 'hso' driver tags Icera-based modems' proprietary protocol port
as a DIAG port, but since they aren't Qualcomm-based, it's not
a DIAG port. Just turn off AT probing and let QCDM probing
fail the port instead of assuming it's a DIAG port.
The logic gets completely stuck when this happens:
Stack trace below:
#0 0x77661424 in __kernel_vsyscall ()
#1 0x77337c3c in pthread_cond_wait ()
#2 0x773cebaa in g_cond_wait () from /usr/lib/libglib-2.0.so.0
#3 0x774c03cc in g_cancellable_disconnect () from /usr/lib/libgio-2.0.so.0
#4 0x76955d36 in connect_cancelled_cb (cancellable=0x78e055a0, self=0x78e0b590)
#5 0x77460982 in g_cclosure_marshal_VOID__VOIDv () from /usr/lib/libgobject-2.0.so.0
#6 0x7745ed8a in ?? () from /usr/lib/libgobject-2.0.so.0
#7 0x77478435 in g_signal_emit_valist () from /usr/lib/libgobject-2.0.so.0
#8 0x77478eb3 in g_signal_emit () from /usr/lib/libgobject-2.0.so.0
#9 0x774c01eb in g_cancellable_cancel () from /usr/lib/libgio-2.0.so.0
#10 0x776a0eab in mm_bearer_disconnect (self=0x78e0b590, callback=0x776c5980 <disconnect_ready>,
#11 0x776c57de in disconnect_next_bearer (ctx=0x78e12870) at mm-iface-modem-simple.c:898
#12 0x776c58d2 in disconnect_auth_ready (self=0x78df3048, res=0x78e06210, ctx=0x78e12870)
#13 0x774fed25 in g_simple_async_result_complete () from /usr/lib/libgio-2.0.so.0
#14 0x776a8c4e in authorize_ready (authp=0x78db68d0, res=0x76801638, simple=0x78e06210)
#15 0x774fed25 in g_simple_async_result_complete () from /usr/lib/libgio-2.0.so.0
#16 0x774fee3e in ?? () from /usr/lib/libgio-2.0.so.0
#17 0x7738a7a2 in ?? () from /usr/lib/libglib-2.0.so.0
#18 0x7738ce83 in g_main_context_dispatch () from /usr/lib/libglib-2.0.so.0
#19 0x7738d248 in ?? () from /usr/lib/libglib-2.0.so.0
#20 0x7738d6eb in g_main_loop_run () from /usr/lib/libglib-2.0.so.0
#21 0x77696a7d in main (argc=2, argv=0x7fbb1f04) at main.c:158
http://code.google.com/p/chromium-os/issues/detail?id=36448
Instead of getting the port type hints while grabbing each probed port, we now
run a custom init operation in the probing which already gives us the port type,
and therefore allows us to completely skip port probings.
Also now added hints for 'Diag' (QCDM) ports and AT/'Modem' ports (I guess it's
the one for PPP if we don't have a net port, which is unlikely anyway in HSO).
This makes the probing of an Option/HSO modem almost instant.
We will not report 'CS' as a supported mode every time '2G' is supported. This
actually was forcing all plugins to handle a 'CS' fallback when they didn't have
CS-specific mode setup. So, to simplify things, we will only report 'CS' as
supported for those plugins which actually allow to select 'CS' mode (e.g. the
'wavecom' plugin).
If we are requested to cancel the connection, we first need to wait for the
connection attempt to finish before issuing the disconnect command, as otherwise
the modem just returns an error saying that it cannot perform the operation and
at the end we end up with the modem connected but ModemManager thinking that it
isn't.
Both the ModemManager daemon and the mmcli will now include `libmm-glib.h' only.
We also handle two new special `_LIBMM_INSIDE_MM' and `LIBMM_INSIDE_MMCLI'
symbols, which if included before the `libmm-glib.h' library allow us to:
* Don't include the libmm-glib high level API in the ModemManager daemon, as
the object names would clash with those in the core.
* Define some of the methods of helper objects to be included only if compiling
ModemManager daemon or the mmcli.
Different ports of the same modem may get handled by different drivers. We
therefore need to provide a list of drivers (new `Modem.Drivers' property with
signature 'as') instead of just one (removed `Modem.Driver' property with
signature 's').
$ sudo mmcli -m 0 | grep drivers
| drivers: 'qcserial, qmi_wwan'
In the connection sequence, we make sure that the Bearer object is valid by
keeping a reference in the Dial3gppContext (actually, another one kept by the
GSimpleAsyncResult as well). But we are considering here the case where the
connection context is completed and freed by an unsolicited message handler
before we get the reply to the AT command, so to properly ensure that the bearer
object is still valid when we try to check if the context is in the priv struct,
we need to keep an extra ref around.
In the connection sequence, we keep the context in the private info of the
Bearer object, so that we can complete and free it when we receive OWANCALL
unsolicited messages. Now, the reply of the OWANCALL itself may get processed
as an unsolicited message, so effectively we're processing and finishing the
connection/disconnection context *before* we process the reply of the AT
command.
This patch ensures that we do not try to re-use the connection context after it
has been processed by the unsolicited messages handler.
