In QMI modems the logic behind supported and current bands is completely
separated in different services (DMS vs NAS). Actually, the list reported by NAS
as current band preferences seems to include more values than the ones reported
by DMS as supported bands (e.g. CDMA bands are reported even if the firmware
image is GSM/HSPA only).
So, just clean up the list of current preferred bands so that no more than those
given as supported is used.
The $NWQMISTATUS command sometimes replies an ERROR shortly after
calling the $NWQMICONNECT command, but then replies the proper QMI
status if we retry it. This behavior is observed on an E362 modem with
4.08 firmware.
(ttyUSB0): --> 'AT$NWQMICONNECT=,,,,,,"",,,"",""<CR>'
(ttyUSB0): <-- '<CR><LF>OK<CR><LF>'
(ttyUSB0): --> 'AT$NWQMISTATUS<CR>'
(ttyUSB0): <-- '<CR><LF>ERROR<CR><LF>'
Got failure code 100: Unknown error
QMI connection status failed: Unknown error
In firmware 4.08, the $NWQMISTATUS command returns different values for
QMI state to indicate the current connection state. This patch modifies
the code to handle $NWQMISTATUS responses in firmware 1.41 and 4.08.
We do need to specify which is the primary port being used for controlling the
modem. This allows us to match the device with an already existing bluetooth
device in NetworkManager.
This reverts commit e2f3034f6e.
The report of current access technologies is supposed to give which is the
*current* access technology being active. We allow reporting more than one for
the cases where several access technologies are given simultaneously (e.g.
cdma1x + evdo + lte). For example, we shouldn't be giving 4 different
technologies like "umts, hsdpa, hsupa, hspa" when the modem reports
"3G-HSDPA-HSUPA". Just giving HSPA in that case is enough and more accurate.
This WWAN module came installed in my new HP EliteBook 8570p Laptop.
The patch is generated against the master branch but the same udev
rule should be useful in the 0.5 and 0.6 branches as well.
Signed-off-by: David Härdeman <david@hardeman.nu>
The interfaces usually retrieve objects (e.g. skeletons) from the Modem object
using g_object_get(), but we didn't make sure that these objects were actually
valid before using them.
This should clean up errors happening when the modem gets unplugged and still
some actions are ongoing.
Should fix https://bugzilla.gnome.org/show_bug.cgi?id=685933
Specifying 'none' is really not exclusive. We may want to say that the modem can
either authenticate with a given protocol, or otherwise just try without
authentication.
The reality is that 'none' itself is usually always given in the connection
settings.
This is the port to git master of the following commit:
commit ff8c60641aa2ea41080c15f81f633b3f78e07bf8
Author: Dan Williams <dcbw@redhat.com>
Date: Mon Sep 10 17:12:38 2012 -0500
via: new plugin for CBP7-based CDMA and EVDO devices (bgo #683525)
The Via baseband is used in a number of CDMA/EVDO devices, from
ChinaTelecom USB sticks, to the Fusion Wireless/UBlox 2770p, to
various Motorola Android phones.
