The UE modes of operation for LTE are defined in 3GPP TS 24.301 (e.g.
section 4.3 in v10.3.0):
* PS mode 1: EPS only, 'voice centric'
* PS mode 2: EPS only, 'data centric'
* CS/PS mode 1: EPS and non-EPS, 'voice centric'
* CS/PS mode 2: EPS and non-EPS, 'data centric'
The mode specifies, among other things, how the UE should behave w.r.t
CS fallback depending on the capabilities reported by the network.
Using an intermediate constant variable breaks compilation with C
compilers, as these variables cannot be used as initializers.
Instead, define a deprecated type and cast all deprecated symbols to
that type. We lose the information about what the new replacement
symbol is, but we don't break compilation.
E.g.:
test.c: In function ‘main’:
test.c:8:5: warning: ‘MMModemBandDeprecated’ is deprecated [-Wdeprecated-declarations]
printf ("band: %d\n", MM_MODEM_BAND_U2100);
^~~~~~
Those Roman numeral suffixes in MM_MODEM_BAND_EUTRAN_* were replaced
with 1, 2, 3, ..., etc. This patch adds a compatibility header,
ModemManager-compat.h, to alias the old MM_MODEM_BAND_EUTRAN_* values to
the new values.
We will expose a new 'Ports' property listing all ports currently known by a
given modem. Ports which are not used but are detected as being part of the
modem will be listed with an 'unknown' port type.
This change uses the new 'MMModemPortType' enum and the new 'MMModemPortInfo'
helper struct to handle these values in libmm-glib. The already available
'MMPortType' enum hasn't been re-used for the interface because it contains
values that we don't need (e.g. IGNORED).
The port list is now also included in the modem information command of mmcli:
$ sudo mmcli -m 0
/org/freedesktop/ModemManager1/Modem/0 (device id '97b7b99e3e2bea103880545b619fb05a3cc81b26')
-------------------------
System | device: '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4'
| drivers: 'qcserial, qmi_wwan'
| plugin: 'Gobi'
| primary port: 'cdc-wdm0'
| ports: 'ttyUSB0 (qcdm), ttyUSB1 (at), cdc-wdm0 (qmi), wwp0s29u1u4 (net)'
https://bugzilla.gnome.org/show_bug.cgi?id=702678
We don't want to support only 'relative' validity, so don't assume that the
Validity property will always be a uint32 value.
Instead, we define the Validity propery as '(uv)' tuple, where the first value
(a MMSmsValidityType) specifies the type of validity, and the second value is
a variant formatted accordingly to what the validity type specifies (e.g. a
uint32 value if the type is MM_SMS_VALIDITY_TYPE_RELATIVE).
For bearers using STATIC or DHCP IP method, the modem itself is the one
negotiating authentication with the network. The new `allowed-auth' property
allows users to specify which authentication method(s) are allowed to be used.
See the following NetworkManager commit for more reference:
commit 34aef8aaaa09b7473b9496aa49e550bd2def03f8
Author: Andrew Bird <ajb@spheresystems.co.uk>
Date: Thu Mar 15 16:19:43 2012 -0500
Instead of using a predefined set of string values for 'ip-type' in
Modem.CreateBearer() and Simple.Connect(), we'll use an enumeration. The
implementation will then need to convert the requested IP family type to e.g.
the correct PDP type in 3GPP modems.
This change also consolidates the use of enums in dictionary properties when
possible to do so, as with the Rm Protocol.
