Also, make sure we enable/disable the voice related unsolicited events
in both primary and secondary ports, because it may happen that the
primary port is connected with PPP and we're using the secondary port
for control.
Since this plugin uses a bitmask to represent bands, we have
to be wary of shifting outside the precision of the bitmask
storage type. In this case, it was possible to generate 1 << 31
in a signed integer type as an intermediate step of B3G_FLAG,
which is undefined behavior (and usually results in INT_MIN,
breaking comparisons with the value).
Bug was reported to the chromium tracker at crbug.com/1019301
Original patch updated by Aleksander Morgado to leave
MM_MODEM_BAND_TELIT_3G_LAST as MM_MODEM_BAND_UTRAN_19, as that is the
highest 3G band supported by the current implementation. Worth noting
that this was not a real bug as the maximum flag we would have been
setting was (1 << 19) anyway.
It was observed that sporadically it may take more than 5 seconds for modem to
respond to AT#REBOOT. Increase the timeout on AT command to not report
unnecessary errors to the user.
The SIM7600E ends up emitting these URCs with too many <CR>s, and the
generic +CRING handler doesn't catch them, interfering with other
actions, e.g.:
$ sudo mmcli --call 1 --accept
error: couldn't accept the call: 'GDBus.Error:org.freedesktop.ModemManager1.Error.Core.Failed: Couldn't accept the call: Unhandled response '+CRING: VOICE
+CRING: VOICE''
Just processing and parsing them for now, so that they don't interfere
with other commands:
$ sudo mmcli --call 1 --accept
error: couldn't accept the call: 'GDBus.Error:org.freedesktop.ModemManager1.Error.Core.Failed: Couldn't accept the call: Unhandled response '
VOICE CALL: BEGIN''
We will explicitly query for +AUTOCSQ and +CNSMOD support before
trying to enable them.
If +AUTOCSQ is supported and correctly enabled, we'll request signal
quality polling to be disabled.
If +CNSMOD is supported and correctly enabled, we'll request access
technology polling to be disabled.
The +AUTOCSQ setup enables automatic signal quality reporting via +CSQ
URCs, which unfortunately have the same format as the +CSQ command
responses.
Therefore, we need to subclass load_signal_quality() explicitly in
order to ignore those cases where the response to the +CSQ command is
received empty (already processed as a URC).
The logic to setup the generic +CIND indications in the SIM7600E seems
to end up breaking connectivity when in TTY+PPP mode. If we issue the
AT+CMER=3,0,0,1 command, this will end up in the modem not replying a
correct CONNECT response to the ATD command.
Let's disable these +CIND indications completely in the simtech
plugin, as there is even no AT command reference saying those are
supported.
Fixes https://gitlab.freedesktop.org/mobile-broadband/ModemManager/issues/144
