This patch makes declarations bind to definitions within the same module
to prevent the potential ambiguity if referenced directly.
AddressSanitizer think they violated one definition rule, although
those symbols are accessed by address through their modules and do
not depend on the order of the libararies loaded.
This patch increases the response timeout for the probe AT commands for
altair modems.
We've been noticing some altair modems taking upto 6 seconds to respond to the
initial probe command after a reset which results in modem-manager
timing out and sending a second probe command. The modem sends a response
after about 6 seconds for the initial probe command which modem-manager
treats as response to second probe command and this results in the
modem-manager and modem going out of sync because the modem's second
probe response is treated as response to the next initialization AT command
sent by modem-manager and so on.
Change-Id: Iad8b0786327b153fd95c8ee4516f352325a42cf7
Update PCO handling code such that it conforms to the latest VZW network
behavior. This includes updating the way we mark a SIM as provisioned.
In the old network, only provisioned SIMs can attach to the network.
Now, unprovisioned SIMs can attach and connect to the network.
Change-Id: Ie454f6fb6d8764161f167e93a4235bb93fbde59a
Due to a firmware issue, the modem may reply an invalid band value, such
as 0, for the %BANDCAP or %GETCFG="BAND" command. This patch moves
parse_bands_response() to mm-modem-helpers-altair-lte.c, modifies the
function to ignore any invalid band outside the range of E-UTRAN
operating bands, and add unit tests for the function.
The Altair LTE modem only uses its primary AT port for AT commands.
Instead of referencing any existing secondary port, this patch changes
MMBroadbandBearerAltairLte to explicitly use the primary port during the
connection and disconnection sequence.
A firmware bug in Altair ALT3100 bricks the modem when
- The modem is out of coverage (Registration state is unknown (CEREG: 4))
- A disconnect attempt is made using the AT%DPDNACT command.
This patch prevents this situation by failing the connect/disconnect attempts in
the altair plugin when registration state is unknown, without attempting to
connect/disconnect the modem.
This patch uses the extended error code after a registration failure to
determine if the SIM in the relevant modem is associated with a non-provisioned
account. It uses the standard AT+CEER command, but the implementation is
restricted to the altair plugin.
Originally developed by:
Ben Chan <benchan@chromium.org>
This patch replaces mm_bearer_report_disconnection() with a more generic
mm_bearer_report_connection_status(), which allows reporting any
connection status of a bearer. This further allows getting rid of those
custom report_connection_status functions in plugic specific bearer
subclasses.
Note that while plugin-specific implementations can receive multiple
'MMBearerConnectionStatus' values, the generic implementation is only allowed
to receive DISCONNECTED. Plugins need to make sure that they process all the
other status values, and only report DISCONNECTED to the parent when required.
MBM:
The MBM bearer implementation of report_connection_status() expects either
CONNECTED or DISCONNECTED. If any of these is received and there is an ongoing
connection attempt, the corresponding operation will be completed. If there is
no connection attempt, we will just handle the DISCONNECTED state, calling the
parent method to notify that the modem got network-disconnected.
Icera:
The Icera bearer implementation of report_connection_status() expects either
CONNECTED, CONNECT FAILED or DISCONNECTED. If any of these is received and
there is an ongoing connection or disconnection attempt, the corresponding
operation will be completed. If there is no connection or disconnection
attempt, we will just handle the CONNECT FAILED and DISCONNECTED states,
calling the parent method (always with DISCONNECTED) to notify that the modem
got network-disconnected.
Option/HSO:
The Option/HSO bearer implementation of report_connection_status() expects
either CONNECTED, CONNECTION FAILED or DISCONNECTED. If any of these is
received and there is an ongoing connection or disconnection attempt, the
corresponding operation will be completed. If there is no connection or
disconnection attempt, we will just handle the CONNECTION FAILED and
DISCONNECTED states, calling the parent method (always with DISCONNECTED) to
notify that the modem got network-disconnected.
Huawei:
The Huawei bearer implementation of report_connection_status() expects either
CONNECTED or DISCONNECTED. These messages are not used to process pending
connection or disconnection attempts; so if they are received while one of
these is on-going, it will just be ignored. CONNECTED reports are also
ignored, so we will just handle the DISCONNECTED state, calling the parent
method to notify that the modem got network-disconnected.
Altair-LTE:
The Altair-LTE bearers will only report DISCONNECTED on network-disconnected
cases. There is no custom report_connection_status().
Novatel-LTE:
The Novatel-LTE bearers will only report DISCONNECTED on network-disconnected
cases. There is no custom report_connection_status().
This patch fixes own_enable_unsolicited_events_ready() to use
mm_base_modem_at_command_full_finish(), instead of
mm_base_modem_at_sequence_full_finish(), as the %STATCM=1 command is
issued via mm_base_modem_at_command_full().
With a non-zero send delay, the communication over the ttyACM port of
the modem is not very stable when USB auto-suspend is enabled for the
modem. The send delay is not necessary and thus removed by this patch.
Ori Inbar <ori.inbar@altair-semi.com> reported the issue and suggested
this fix.
This patch fixes a potential crash when
MMIfaceModem::load_current_bands_ready() dereferences a NULL GError
pointer, which happens when the altair-lte plugin fails to load the
current bands but does not propagate the error. It also fixes a similar
issue with the plugin fails to load the supported bands, even though
MMIfaceModem::load_supported_bands_ready() checks for a NULL GError
pointer.
