Different ports of the same modem may get handled by different drivers. We
therefore need to provide a list of drivers (new `Modem.Drivers' property with
signature 'as') instead of just one (removed `Modem.Driver' property with
signature 's').
$ sudo mmcli -m 0 | grep drivers
| drivers: 'qcserial, qmi_wwan'
Instead of using a predefined set of string values for 'ip-type' in
Modem.CreateBearer() and Simple.Connect(), we'll use an enumeration. The
implementation will then need to convert the requested IP family type to e.g.
the correct PDP type in 3GPP modems.
This change also consolidates the use of enums in dictionary properties when
possible to do so, as with the Rm Protocol.
This patch fixes mmcli to set the default timeout on the manager proxy
interface (MmGdbusOrgFreedesktopModemManager1) instead of MMManager
itself. The later is not a GDBusProxy object.
We remove the `--command-timeout' option, as the AT command timeout is now
directly computed from our default DBus timeout (modifiable with `--timeout').
For example, we do allow:
mmcli -m 0 --enable-location-gps-nmea --disable-location-gps-raw
All the options get merged into a single Setup() call in the Location interface.
Do not try to perform feature/capability specific actions if we're still
unlocked, as the modem didn't yet export the feature/capability specific
interface.
The only interfaces expected while modem is unlocked are the Modem and Simple
interfaces, as well as the SIM interface in the SIM object, of course.
Renamed `MMCommonSimpleProperties' to `MMSimpleStatus', and removed the
`MMSimpleStatusProperties' provided in libmm-glib. We'll just use the original
one from libmm-common always.
Renamed `MMCommonLocation3gpp' to `MMLocation3gpp', and removed the
`MMModemLocation3gpp' provided in libmm-glib. We'll just use the original one
from libmm-common always.
Renamed `MMCommonConnectProperties' to `MMSimpleConnectProperties', and removed
the `MMModemSimpleConnectProperties' provided in libmm-glib. We'll just use the
original one from libmm-common always.
Equivalent to `PinRetryCount' in the previous API. We don't have an additional
property for the retry count of the current lock, as it really is duplicating
information.
ModemManager will load:
1) The list of supported bands. Note that this doesn't mean that any possible
combination of bands is supported, as modems may support only specific
combinations, but at least gives a rough idea of what the modem is capable
of handling.
2) The list of CURRENT bands. There is no such "Allowed" bands, as we do with
modes, modems will have a specific set of bands being currently used, which
will be reported in the `Bands' property.
If the modem allows modifying the list of bands to use, this can be done with
the `SetBands()' method. If the modem doesn't support using a specific
combination of bands, this method will report an error.
