Back in Linux < 3.6 days, the cdc-wdm ports exposed by the QMI driver
were flagged as owned by the 'usb' subsystem. That changed in 3.6 when
the subsystem was renamed to 'usbmisc':
https://mail.gnome.org/archives/networkmanager-list/2012-June/msg00125.html
This patch removes all monitoring of the 'usb' subsystem completely,
which is anyway a valid subsystem but for which we shouldn't need any
special handling. Right now, with newer kernels, we were using that
monitoring exclusively to get notified of full USB device remove
events, which is really not required as we already process the port
removals one by one.
We simplify the logic everywhere that attempted to match either the
'usb' or 'usbmisc' subsystems, and we no longer require the explicit
checks for the port name being named 'cdc-wdm[0-9]*' in the code, as
that is already taken care of by the ID_MM_CANDIDATE udev tag rule.
Vendor specific plugins that support QMI or MBIM based devices need to
handle the creation of these modems themselves.
https://bugs.freedesktop.org/show_bug.cgi?id=100372
Original patch by Aleksander Morgado.
The vendor id/string based rules should already be enough to get the
telit plugin bind telit devices.
This simplifies support for future Telit devices, as we wouldn't need
any additional change in the plugin. It also helps when working with
RS232 devices as the user wouldn't need to add the explicit tag to get
the devices bound to this plugin.
https://bugs.freedesktop.org/show_bug.cgi?id=100373
Adding the vendor string match allows us to support RS232 devices in
the Telit plugin: the USB vendor id check may now be ignored and
instead we probe for the vendor string via AT commands, which works
even if the device is behind a USB<->RS232 adapter.
https://bugs.freedesktop.org/show_bug.cgi?id=100171
All ports of the same modem reported by the kernel will all be associated with
a common 'uid' (unique id), which uniquely identifies the physical device. This
logic was already in place, what we do now is avoid calling it the 'sysfs
path' of the physical device, because we may not want to use that to identify
a device.
This logic now also enables the possibility of "naming" the modems in a unique
way by setting the "ID_MM_PHYSDEV_UID" property in the "usb_device" that owns
all the ports.
E.g. a custom device has 4 modems in 4 different USB ports. The device path of
each USB device will always be the same, so the naming rules could go like this:
$ vim /usr/lib/udev/rules.d/78-mm-naming.rules
ACTION!="add|change|move", GOTO="mm_naming_rules_end"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-1"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-2"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.3", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-3"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.4", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-4"
LABEL="mm_naming_rules_end"
Each of the modems found will have a unique UID retrieved from the previous list
of rules. Then, "mmcli" has also been updated to allow using the UID instead of
the modem DBus path or index, e.g.:
$ sudo mmcli -m USB-MODEM-1
/org/freedesktop/ModemManager1/Modem/0 (device id '988d83252c0598f670c2d69d5f41e077204a92fd')
-------------------------
Hardware | manufacturer: 'ZTE CORPORATION'
| model: 'MF637'
| revision: 'BD_W7P673A3F3V1.0.0B04'
| supported: 'gsm-umts'
| current: 'gsm-umts'
| equipment id: '356516027657837'
-------------------------
System | device: 'USB-MODEM-1'
| drivers: 'option'
| plugin: 'ZTE'
| primary port: 'ttyUSB5'
| ports: 'ttyUSB5 (at)'
...
$ sudo mmcli -m USB-MODEM-1 --enable
...
This patch makes declarations bind to definitions within the same module
to prevent the potential ambiguity if referenced directly.
AddressSanitizer think they violated one definition rule, although
those symbols are accessed by address through their modules and do
not depend on the order of the libararies loaded.
Adding dynamic port identification for Telit modems that support AT#PORTCFG
command. Port configurations for HE910/UE910/UL865 taken from document
"HE910/UE910/UL865 Families Ports Arrangements User Guide"
