The quick AT probe procedure is only meaningful to avoid waiting the
+READY URC delay. If there is no such delay configured, we shouldn't
run the quick AT probe (as a failure in the AT probe may also
trigger a +READY URC delay).
Just read the udev tag value early and complete the task if the delay
is not configured.
Added reading the ID_MM_UBLOX_PORT_READY_DELAY udev flag value and using
it as an init delay when a value is set.
The 20 second delay for the TOBY-L4 +READ URC has been reimplemented
using the new ID_MM_UBLOX_PORT_READY_DELAY udev value.
Keeps build with GCC 8 happy.
mm-base-call.c:758:18: warning: variable 'response' set but not used [-Wunused-but-set-variable]
mm-base-call.c:822:18: warning: variable 'response' set but not used [-Wunused-but-set-variable]
mm-base-sms.c:908:18: warning: variable 'response' set but not used [-Wunused-but-set-variable]
mm-sms-list.c:331:25: warning: variable 'ctx' set but not used [-Wunused-but-set-variable]
mm-iface-modem-messaging.c:1210:21: warning: variable 'storage_ctx' set but not used [-Wunused-but-set-variable]
huawei/mm-plugin-huawei.c:183:18: warning: variable 'response' set but not used [-Wunused-but-set-variable]
ublox/mm-plugin-ublox.c:161:24: warning: variable 'response' set but not used [-Wunused-but-set-variable]
ublox/mm-plugin-ublox.c:159:24: warning: variable 'ctx' set but not used [-Wunused-but-set-variable]
icera/mm-modem-helpers-icera.c:218:25: warning: variable 'first_free' set but not used [-Wunused-but-set-variable]
novatel/mm-common-novatel.c:50:18: warning: variable 'response' set but not used [-Wunused-but-set-variable]
We used ttyACM0 as secondary port until now, just because we had an
extra AT capable TTY around in addition to the main control ttyACM2
port.
Turns out, using this ttyACM0 may actually break the connection setup
in the wwan interface in a bad way (e.g. not allowing DHCP setup).
The suggestion from u-blox and Intel is to fully ignore ttyACM0; and
given that we no longer need any primary/secondary port logic, we just
remove all the associated udev tags.
The AT control TTYs in the u-blox modems may take some time to be
usable. In order to handle this issue, we configured some longer
timeouts during AT probing, but that may not be always enough.
The u-blox TTYs will report readiness via a "+AT: READY" URC, which
we can use during custom initialization to decide right away that the
port is AT. We use up to 20s as that is close to the worst case seen
during experimentation, happening after the module undergoes a full
NVM reset. If the timeout is reached without receiving the URC, we
still run standard AT probing afterwards. This new logic just tries
to make it sure we don't do any probing before the module is ready to
accept it.
If the module hasn't been hotplugged (i.e. it was already there when
ModemManager started) we do a quick first AT probing and if that fails
we run the "+AT: READY" URC wait as if it was hotplugged.
The TOBY-L4 exposes multiple TTY ports, but each of them has different
purposes:
The TTY at interface #2 is a fully capable AT port but shouldn't be
used to start connections, so we flag it as secondary.
The TTY at interface #4 is a non-AT debug port, so we explicitly
ignore it to make probing faster.
The TTY at interface #6 is the fully capable AT port that must be used
as primary port.
The TTY at interface #8 is an AT-capable port but dedicated to FOTA
update operations.
Program received signal SIGSEGV, Segmentation fault.
strchr () at ../sysdeps/arm/armv6/strchr.S:28
28 ../sysdeps/arm/armv6/strchr.S: No such file or directory.
(gdb) bt
#0 strchr () at ../sysdeps/arm/armv6/strchr.S:28
#1 0x76b121c8 in g_param_spec_pool_lookup () from ~/buildroot/output/staging/lib/libgobject-2.0.so.0
#2 0x76b0cf44 in g_object_new_valist () from ~/buildroot/output/staging/lib/libgobject-2.0.so.0
#3 0x76b0d39c in g_object_new () from ~/buildroot/output/staging/lib/libgobject-2.0.so.0
#4 0x75f75e40 in mm_plugin_create () at ublox/mm-plugin-ublox.c:99
#5 0x00031550 in load_plugin (path=0xe9b68 "/usr/lib/ModemManager/libmm-plugin-ublox.so") at mm-plugin-manager.c:1521
#6 load_plugins (error=0x7efffa68, self=0xdc4f0) at mm-plugin-manager.c:1574
#7 initable_init (initable=<optimized out>, cancellable=<optimized out>, error=0x7efffa68) at mm-plugin-manager.c:1679
#8 0x76b9b278 in g_initable_new_valist () from ~/buildroot/output/staging/lib/libgio-2.0.so.0
#9 0x76b9b2e0 in g_initable_new () from ~/buildroot/output/staging/lib/libgio-2.0.so.0
#10 0x000324d0 in mm_plugin_manager_new (plugin_dir=0xe9c40 "/usr/lib/ModemManager", error=error@entry=0x7efffa68) at mm-plugin-manager.c:1620
#11 0x0002da08 in initable_init (initable=0xddb40, cancellable=<optimized out>, error=0x7efffa68) at mm-base-manager.c:1113
#12 0x76b9b278 in g_initable_new_valist () from ~/buildroot/output/staging/lib/libgio-2.0.so.0
#13 0x76b9b2e0 in g_initable_new () from ~/buildroot/output/staging/lib/libgio-2.0.so.0
#14 0x0002e81c in mm_base_manager_new (connection=connection@entry=0xe1070, plugin_dir=plugin_dir@entry=0x9efb0 "/usr/lib/ModemManager",
auto_scan=auto_scan@entry=1, initial_kernel_events=initial_kernel_events@entry=0x0, enable_test=0, error=0x7efffa68, error@entry=0x7efffa60)
at mm-base-manager.c:957
#15 0x0002b6ec in bus_acquired_cb (connection=0xe1070, name=<optimized out>, user_data=<optimized out>) at main.c:87
#16 0x76c26864 in connection_get_cb () from ~/buildroot/output/staging/lib/libgio-2.0.so.0
#17 0x76bc76cc in g_task_return_now () from ~/buildroot/output/staging/lib/libgio-2.0.so.0
#18 0x76bc7d50 in g_task_return () from
~/buildroot/output/staging/lib/libgio-2.0.so.0
See similar bug in GStreamer:
https://bugzilla.gnome.org/show_bug.cgi?id=740191
Add the vendor string, so it can be probed via AT commands. This allows
to support modems that are connected to a serial port.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When the device is reset, it needs some time before the newly exposed TTYs are
able to reply to our AT commands. We increase the default timeout of the AT
probing commands in order to cope with that, or we'll end up with TTYs of
'unknown' type that aren't used for anything.
