f683391169
If the command-line arg doesn't look like an object path, treat it as the modem # and make the object path.
259 lines
7.5 KiB
Python
Executable File
259 lines
7.5 KiB
Python
Executable File
#!/usr/bin/python
|
|
# -*- Mode: python; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
|
|
#
|
|
# This program is free software; you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation; either version 2 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details:
|
|
#
|
|
# Copyright (C) 2008 Novell, Inc.
|
|
# Copyright (C) 2009 Red Hat, Inc.
|
|
#
|
|
|
|
import sys, dbus
|
|
|
|
DBUS_INTERFACE_PROPERTIES='org.freedesktop.DBus.Properties'
|
|
MM_DBUS_SERVICE='org.freedesktop.ModemManager'
|
|
MM_DBUS_PATH='/org/freedesktop/ModemManager'
|
|
MM_DBUS_INTERFACE='org.freedesktop.ModemManager'
|
|
MM_DBUS_INTERFACE_MODEM='org.freedesktop.ModemManager.Modem'
|
|
MM_DBUS_INTERFACE_MODEM_CDMA='org.freedesktop.ModemManager.Modem.Cdma'
|
|
MM_DBUS_INTERFACE_MODEM_GSM_CARD='org.freedesktop.ModemManager.Modem.Gsm.Card'
|
|
MM_DBUS_INTERFACE_MODEM_GSM_NETWORK='org.freedesktop.ModemManager.Modem.Gsm.Network'
|
|
|
|
def get_cdma_band_class(band_class):
|
|
if band_class == 1:
|
|
return "800MHz"
|
|
elif band_class == 2:
|
|
return "1900MHz"
|
|
else:
|
|
return "Unknown"
|
|
|
|
def get_reg_state(state):
|
|
if state == 1:
|
|
return "registered (roaming unknown)"
|
|
elif state == 2:
|
|
return "registered on home network"
|
|
elif state == 3:
|
|
return "registered on roaming network"
|
|
else:
|
|
return "unknown"
|
|
|
|
def cdma_inspect(proxy, props):
|
|
cdma = dbus.Interface(proxy, dbus_interface=MM_DBUS_INTERFACE_MODEM_CDMA)
|
|
|
|
esn = cdma.GetEsn()
|
|
print "ESN: %s" % esn
|
|
|
|
try:
|
|
(cdma_1x_state, evdo_state) = cdma.GetRegistrationState()
|
|
print "1x State: %s" % get_reg_state (cdma_1x_state)
|
|
print "EVDO State: %s" % get_reg_state (evdo_state)
|
|
except dbus.exceptions.DBusException, e:
|
|
print "Error reading registration state: %s" % e
|
|
|
|
try:
|
|
quality = cdma.GetSignalQuality()
|
|
print "Signal quality: %d" % quality
|
|
except dbus.exceptions.DBusException, e:
|
|
print "Error reading signal quality: %s" % e
|
|
|
|
try:
|
|
info = cdma.GetServingSystem()
|
|
print "Class: %s" % get_cdma_band_class(info[0])
|
|
print "Band: %s" % info[1]
|
|
print "SID: %d" % info[2]
|
|
except dbus.exceptions.DBusException, e:
|
|
print "Error reading serving system: %s" % e
|
|
|
|
|
|
def get_gsm_network_mode(modem):
|
|
mode = modem.GetNetworkMode()
|
|
if mode == 0x0:
|
|
mode = "Unknown"
|
|
elif mode == 0x1:
|
|
mode = "Any"
|
|
elif mode == 0x2:
|
|
mode = "GPRS"
|
|
elif mode == 0x4:
|
|
mode = "EDGE"
|
|
elif mode == 0x8:
|
|
mode = "UMTS"
|
|
elif mode == 0x10:
|
|
mode = "HSDPA"
|
|
elif mode == 0x20:
|
|
mode = "2G Preferred"
|
|
elif mode == 0x40:
|
|
mode = "3G Preferred"
|
|
elif mode == 0x80:
|
|
mode = "2G Only"
|
|
elif mode == 0x100:
|
|
mode = "3G Only"
|
|
elif mode == 0x200:
|
|
mode = "HSUPA"
|
|
elif mode == 0x400:
|
|
mode = "HSPA"
|
|
else:
|
|
mode = "(Unknown)"
|
|
|
|
print "Mode: %s" % mode
|
|
|
|
def get_gsm_band(modem):
|
|
band = modem.GetBand()
|
|
if band == 0x0:
|
|
band = "Unknown"
|
|
elif band == 0x1:
|
|
band = "Any"
|
|
elif band == 0x2:
|
|
band = "EGSM (900 MHz)"
|
|
elif band == 0x4:
|
|
band = "DCS (1800 MHz)"
|
|
elif band == 0x8:
|
|
band = "PCS (1900 MHz)"
|
|
elif band == 0x10:
|
|
band = "G850 (850 MHz)"
|
|
elif band == 0x20:
|
|
band = "U2100 (WCSMA 2100 MHZ, Class I)"
|
|
elif band == 0x40:
|
|
band = "U1700 (WCDMA 3GPP UMTS1800 MHz, Class III)"
|
|
elif band == 0x80:
|
|
band = "17IV (WCDMA 3GPP AWS 1700/2100 MHz, Class IV)"
|
|
elif band == 0x100:
|
|
band = "U800 (WCDMA 3GPP UMTS800 MHz, Class VI)"
|
|
elif band == 0x200:
|
|
band = "U850 (WCDMA 3GPP UMT850 MHz, Class V)"
|
|
elif band == 0x400:
|
|
band = "U900 (WCDMA 3GPP UMTS900 MHz, Class VIII)"
|
|
elif band == 0x800:
|
|
band = "U17IX (WCDMA 3GPP UMTS MHz, Class IX)"
|
|
else:
|
|
band = "(invalid)"
|
|
|
|
print "Band: %s" % band
|
|
|
|
|
|
mm_allowed = { 0: "any",
|
|
1: "2G preferred",
|
|
2: "3G preferred",
|
|
3: "2G only",
|
|
4: "3G only"
|
|
}
|
|
|
|
mm_act = { 0: "unknown",
|
|
1: "GSM",
|
|
2: "GSM Compact",
|
|
3: "GPRS",
|
|
4: "EDGE",
|
|
5: "UMTS",
|
|
6: "HSDPA",
|
|
7: "HSUPA",
|
|
8: "HSPA"
|
|
}
|
|
|
|
mm_reg = { 0: "idle",
|
|
1: "home",
|
|
2: "searching",
|
|
3: "denied",
|
|
4: "unknown",
|
|
5: "roaming"
|
|
}
|
|
|
|
def gsm_inspect(proxy, props):
|
|
# Gsm.Card interface
|
|
card = dbus.Interface(proxy, dbus_interface=MM_DBUS_INTERFACE_MODEM_GSM_CARD)
|
|
|
|
simid = "<unavailable>"
|
|
try:
|
|
simid = props.Get(MM_DBUS_INTERFACE_MODEM_GSM_CARD, "SimIdentifier")
|
|
except dbus.exceptions.DBusException:
|
|
pass
|
|
print "SIM ID: %s" % simid
|
|
|
|
imei = "<unavailable>"
|
|
try:
|
|
imei = card.GetImei()
|
|
except dbus.exceptions.DBusException:
|
|
pass
|
|
print "IMEI: %s" % imei
|
|
|
|
imsi = "<unavailable>"
|
|
try:
|
|
imsi = card.GetImsi()
|
|
except dbus.exceptions.DBusException:
|
|
pass
|
|
print "IMSI: %s" % imsi
|
|
|
|
opid = "<unavailable>"
|
|
try:
|
|
opid = card.GetOperatorId()
|
|
except dbus.exceptions.DBusException:
|
|
pass
|
|
print "Operator ID: %s" % opid
|
|
|
|
# Gsm.Network interface
|
|
net = dbus.Interface(proxy, dbus_interface=MM_DBUS_INTERFACE_MODEM_GSM_NETWORK)
|
|
try:
|
|
quality = net.GetSignalQuality()
|
|
print "Signal quality: %d" % quality
|
|
except dbus.exceptions.DBusException, e:
|
|
print "Error reading signal quality: %s" % e
|
|
|
|
try:
|
|
reg = net.GetRegistrationInfo()
|
|
print "Reg status: %s (%s, '%s')" % (mm_reg[int(reg[0])], reg[1], reg[2])
|
|
except dbus.exceptions.DBusException, e:
|
|
print "Error reading registration: %s" % e
|
|
|
|
try:
|
|
allowed = props.Get(MM_DBUS_INTERFACE_MODEM_GSM_NETWORK, "AllowedMode")
|
|
print "Allowed mode: %s" % mm_allowed[allowed]
|
|
except dbus.exceptions.DBusException, e:
|
|
print "Error reading allowed mode: %s" % e
|
|
|
|
try:
|
|
act = props.Get(MM_DBUS_INTERFACE_MODEM_GSM_NETWORK, "AccessTechnology")
|
|
print "Access Tech: %s" % mm_act[act]
|
|
except dbus.exceptions.DBusException, e:
|
|
print "Error reading current access technology: %s" % e
|
|
|
|
|
|
|
|
bus = dbus.SystemBus()
|
|
objpath = sys.argv[1]
|
|
if objpath[:1] != '/':
|
|
objpath = "/org/freedesktop/ModemManager/Modems/%s" % str(objpath)
|
|
proxy = bus.get_object(MM_DBUS_SERVICE, objpath)
|
|
|
|
# Properties
|
|
props = dbus.Interface(proxy, dbus_interface='org.freedesktop.DBus.Properties')
|
|
|
|
mtype = props.Get(MM_DBUS_INTERFACE_MODEM, 'Type')
|
|
if mtype == 1:
|
|
print "Type: GSM"
|
|
elif mtype == 2:
|
|
print "Type: CDMA"
|
|
|
|
print "Driver: %s" % (props.Get(MM_DBUS_INTERFACE_MODEM, 'Driver'))
|
|
print "Modem device: %s" % (props.Get(MM_DBUS_INTERFACE_MODEM, 'MasterDevice'))
|
|
print "Data device: %s" % (props.Get(MM_DBUS_INTERFACE_MODEM, 'Device'))
|
|
print "Device ID: %s" % (props.Get(MM_DBUS_INTERFACE_MODEM, 'DeviceIdentifier'))
|
|
print ""
|
|
|
|
modem = dbus.Interface(proxy, dbus_interface=MM_DBUS_INTERFACE_MODEM)
|
|
info = modem.GetInfo()
|
|
print "Vendor: %s" % info[0]
|
|
print "Model: %s" % info[1]
|
|
print "Version: %s" % info[2]
|
|
print ""
|
|
|
|
if mtype == 1:
|
|
gsm_inspect(proxy, props)
|
|
elif mtype == 2:
|
|
cdma_inspect(proxy, props)
|
|
|