Files
ModemManager/plugins/quectel/mm-shared-quectel.c
Teijo Kinnunen d98597e430 quectel: Check SIM swap after "+QUSIM: 1" URC
Quectel emits "+QUSIM: 1" after eUICC reinitialization. Detect it
and perform SIM swap check if one is encountered.

The motivation here is that M2M eUICC profile switch causes eUICC
reset and this is one way to detect and handle profile switches
properly on Quectel modems. The existing SIM hot swap mechanism is
used as it appears to be suitable for handling profile switches as
well as physical swapping of SIM cards.
2020-04-17 07:45:47 +00:00

188 lines
6.4 KiB
C

/* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details:
*
* Copyright (C) 2018 Aleksander Morgado <aleksander@aleksander.es>
*/
#include <config.h>
#include <glib-object.h>
#include <gio/gio.h>
#define _LIBMM_INSIDE_MM
#include <libmm-glib.h>
#include "mm-log-object.h"
#include "mm-iface-modem-firmware.h"
#include "mm-base-modem.h"
#include "mm-base-modem-at.h"
#include "mm-shared-quectel.h"
/*****************************************************************************/
/* Firmware update settings loading (Firmware interface) */
MMFirmwareUpdateSettings *
mm_shared_quectel_firmware_load_update_settings_finish (MMIfaceModemFirmware *self,
GAsyncResult *res,
GError **error)
{
return g_task_propagate_pointer (G_TASK (res), error);
}
static void
qfastboot_test_ready (MMBaseModem *self,
GAsyncResult *res,
GTask *task)
{
MMFirmwareUpdateSettings *update_settings;
if (!mm_base_modem_at_command_finish (self, res, NULL))
update_settings = mm_firmware_update_settings_new (MM_MODEM_FIRMWARE_UPDATE_METHOD_NONE);
else {
update_settings = mm_firmware_update_settings_new (MM_MODEM_FIRMWARE_UPDATE_METHOD_FASTBOOT);
mm_firmware_update_settings_set_fastboot_at (update_settings, "AT+QFASTBOOT");
}
g_task_return_pointer (task, update_settings, g_object_unref);
g_object_unref (task);
}
void
mm_shared_quectel_firmware_load_update_settings (MMIfaceModemFirmware *self,
GAsyncReadyCallback callback,
gpointer user_data)
{
GTask *task;
task = g_task_new (self, NULL, callback, user_data);
mm_base_modem_at_command (MM_BASE_MODEM (self),
"AT+QFASTBOOT=?",
3,
TRUE,
(GAsyncReadyCallback)qfastboot_test_ready,
task);
}
/*****************************************************************************/
/* "+QUSIM: 1" URC is emitted by Quectel modems after the USIM has been
* (re)initialized. We register a handler for this URC and perform a check
* for SIM swap when it is encountered. The motivation for this is to detect
* M2M eUICC profile switches. According to SGP.02 chapter 3.2.1, the eUICC
* shall trigger a REFRESH operation with eUICC reset when a new profile is
* enabled. The +QUSIM URC appears after the eUICC has restarted and can act
* as a trigger for profile switch check. This should basically be handled
* the same as a physical SIM swap, so the existing SIM hot swap mechanism
* is used.
*/
static void
quectel_qusim_check_for_sim_swap_ready (MMIfaceModem *self,
GAsyncResult *res)
{
GError *error = NULL;
if (!MM_IFACE_MODEM_GET_INTERFACE (self)->check_for_sim_swap_finish (self, res, &error)) {
mm_obj_warn (self, "couldn't check SIM swap: %s", error->message);
g_error_free (error);
} else
mm_obj_dbg (self, "check SIM swap completed");
}
static void
quectel_qusim_unsolicited_handler (MMPortSerialAt *port,
GMatchInfo *match_info,
MMIfaceModem* self)
{
if (MM_IFACE_MODEM_GET_INTERFACE (self)->check_for_sim_swap &&
MM_IFACE_MODEM_GET_INTERFACE (self)->check_for_sim_swap_finish) {
mm_obj_dbg (self, "checking SIM swap");
MM_IFACE_MODEM_GET_INTERFACE (self)->check_for_sim_swap (
self,
(GAsyncReadyCallback)quectel_qusim_check_for_sim_swap_ready,
NULL);
}
}
gboolean
mm_shared_quectel_setup_sim_hot_swap_finish (MMIfaceModem *self,
GAsyncResult *res,
GError **error)
{
return g_task_propagate_boolean (G_TASK (res), error);
}
void
mm_shared_quectel_setup_sim_hot_swap (MMIfaceModem *self,
GAsyncReadyCallback callback,
gpointer user_data)
{
MMPortSerialAt *port_primary;
MMPortSerialAt *port_secondary;
GTask *task;
GRegex *pattern;
task = g_task_new (self, NULL, callback, user_data);
port_primary = mm_base_modem_peek_port_primary (MM_BASE_MODEM (self));
port_secondary = mm_base_modem_peek_port_secondary (MM_BASE_MODEM (self));
pattern = g_regex_new ("\\+QUSIM:\\s*1\\r\\n", G_REGEX_RAW, 0, NULL);
g_assert (pattern);
if (port_primary)
mm_port_serial_at_add_unsolicited_msg_handler (
port_primary,
pattern,
(MMPortSerialAtUnsolicitedMsgFn)quectel_qusim_unsolicited_handler,
self,
NULL);
if (port_secondary)
mm_port_serial_at_add_unsolicited_msg_handler (
port_secondary,
pattern,
(MMPortSerialAtUnsolicitedMsgFn)quectel_qusim_unsolicited_handler,
self,
NULL);
g_regex_unref (pattern);
mm_obj_dbg (self, "+QUSIM detection set up");
g_task_return_boolean (task, TRUE);
g_object_unref (task);
}
/*****************************************************************************/
static void
shared_quectel_init (gpointer g_iface)
{
}
GType
mm_shared_quectel_get_type (void)
{
static GType shared_quectel_type = 0;
if (!G_UNLIKELY (shared_quectel_type)) {
static const GTypeInfo info = {
sizeof (MMSharedQuectel), /* class_size */
shared_quectel_init, /* base_init */
NULL, /* base_finalize */
};
shared_quectel_type = g_type_register_static (G_TYPE_INTERFACE, "MMSharedQuectel", &info, 0);
g_type_interface_add_prerequisite (shared_quectel_type, MM_TYPE_IFACE_MODEM_FIRMWARE);
}
return shared_quectel_type;
}