diff --git a/clients/tests/test-client.check-on-disk/test_004.expected b/clients/tests/test-client.check-on-disk/test_004.expected index d62778c5a..7a5548129 100644 --- a/clients/tests/test-client.check-on-disk/test_004.expected +++ b/clients/tests/test-client.check-on-disk/test_004.expected @@ -3621,9 +3621,69 @@ DHCP6.OPTION[5]: dhcp-6-opt-5 = val-5 CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/Connection/{2} CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | con-xx1 +<<< +size: 1434 +location: clients/tests/test-client.py:1101:test_004()/69 +cmd: $NMCLI dev lldp list ifname eth0 +lang: C +returncode: 0 +stdout: 1288 bytes +>>> +NEIGHBOR[0].DEVICE: eth0 +NEIGHBOR[0].CHASSIS-ID: 00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID: Uplink port +NEIGHBOR[0].PORT-DESCRIPTION: GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME: test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION: Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES: 20 (mac-bridge,router) +NEIGHBOR[1].DEVICE: eth0 +NEIGHBOR[1].CHASSIS-ID: chassis1 +NEIGHBOR[1].PORT-ID: 44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION: GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME: test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION: Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES: 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +NEIGHBOR[2].DEVICE: eth0 +NEIGHBOR[2].CHASSIS-ID: 00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID: port1 +NEIGHBOR[2].PORT-DESCRIPTION: GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME: test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION: Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES: 40 (wlan-access-point,telephone) + +<<< +size: 1444 +location: clients/tests/test-client.py:1101:test_004()/70 +cmd: $NMCLI dev lldp list ifname eth0 +lang: pl_PL.UTF-8 +returncode: 0 +stdout: 1288 bytes +>>> +NEIGHBOR[0].DEVICE: eth0 +NEIGHBOR[0].CHASSIS-ID: 00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID: Uplink port +NEIGHBOR[0].PORT-DESCRIPTION: GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME: test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION: Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES: 20 (mac-bridge,router) +NEIGHBOR[1].DEVICE: eth0 +NEIGHBOR[1].CHASSIS-ID: chassis1 +NEIGHBOR[1].PORT-ID: 44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION: GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME: test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION: Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES: 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +NEIGHBOR[2].DEVICE: eth0 +NEIGHBOR[2].CHASSIS-ID: 00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID: port1 +NEIGHBOR[2].PORT-DESCRIPTION: GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME: test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION: Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES: 40 (wlan-access-point,telephone) + <<< size: 4615 -location: clients/tests/test-client.py:1036:test_004()/69 +location: clients/tests/test-client.py:1036:test_004()/71 cmd: $NMCLI --color yes con s con-vpn-1 lang: C returncode: 0 @@ -3725,7 +3785,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 4645 -location: clients/tests/test-client.py:1036:test_004()/70 +location: clients/tests/test-client.py:1036:test_004()/72 cmd: $NMCLI --color yes con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -3827,7 +3887,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 4615 -location: clients/tests/test-client.py:1038:test_004()/71 +location: clients/tests/test-client.py:1038:test_004()/73 cmd: $NMCLI --color yes con s con-vpn-1 lang: C returncode: 0 @@ -3929,7 +3989,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 4645 -location: clients/tests/test-client.py:1038:test_004()/72 +location: clients/tests/test-client.py:1038:test_004()/74 cmd: $NMCLI --color yes con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -4031,7 +4091,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 3534 -location: clients/tests/test-client.py:1041:test_004()/73 +location: clients/tests/test-client.py:1041:test_004()/75 cmd: $NMCLI --color yes -f ALL con s con-vpn-1 lang: C returncode: 0 @@ -4113,7 +4173,7 @@ proxy.pac-script: -- <<< size: 3554 -location: clients/tests/test-client.py:1041:test_004()/74 +location: clients/tests/test-client.py:1041:test_004()/76 cmd: $NMCLI --color yes -f ALL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -4195,7 +4255,7 @@ proxy.pac-script: -- <<< size: 488 -location: clients/tests/test-client.py:1047:test_004()/75 +location: clients/tests/test-client.py:1047:test_004()/77 cmd: $NMCLI --color yes -f VPN con s con-vpn-1 lang: C returncode: 0 @@ -4210,7 +4270,7 @@ vpn.timeout: 0 <<< size: 499 -location: clients/tests/test-client.py:1047:test_004()/76 +location: clients/tests/test-client.py:1047:test_004()/78 cmd: $NMCLI --color yes -f VPN con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -4225,7 +4285,7 @@ vpn.timeout: 0 <<< size: 825 -location: clients/tests/test-client.py:1050:test_004()/77 +location: clients/tests/test-client.py:1050:test_004()/79 cmd: $NMCLI --color yes -f GENERAL con s con-vpn-1 lang: C returncode: 0 @@ -4246,7 +4306,7 @@ GENERAL.MASTER-PATH: -- <<< size: 838 -location: clients/tests/test-client.py:1050:test_004()/78 +location: clients/tests/test-client.py:1050:test_004()/80 cmd: $NMCLI --color yes -f GENERAL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -4267,7 +4327,7 @@ GENERAL.MASTER-PATH: -- <<< size: 555 -location: clients/tests/test-client.py:1053:test_004()/79 +location: clients/tests/test-client.py:1053:test_004()/81 cmd: $NMCLI --color yes dev s lang: C returncode: 0 @@ -4282,7 +4342,7 @@ DEVICE TYPE STATE CONNECTION <<< size: 570 -location: clients/tests/test-client.py:1053:test_004()/80 +location: clients/tests/test-client.py:1053:test_004()/82 cmd: $NMCLI --color yes dev s lang: pl_PL.UTF-8 returncode: 0 @@ -4297,7 +4357,7 @@ DEVICE TYPE STATE CONNECTION <<< size: 1782 -location: clients/tests/test-client.py:1056:test_004()/81 +location: clients/tests/test-client.py:1056:test_004()/83 cmd: $NMCLI --color yes -f all dev status lang: C returncode: 0 @@ -4312,7 +4372,7 @@ DEVICE TYPE STATE IP4-CONNECTIVITY IP6-CONNECTIVITY DBUS-PATH <<< size: 1797 -location: clients/tests/test-client.py:1056:test_004()/82 +location: clients/tests/test-client.py:1056:test_004()/84 cmd: $NMCLI --color yes -f all dev status lang: pl_PL.UTF-8 returncode: 0 @@ -4327,7 +4387,7 @@ DEVICE TYPE STATE IP4-CONNECTIVITY IP6-CONNECTIVITY DBUS-PATH <<< size: 8059 -location: clients/tests/test-client.py:1059:test_004()/83 +location: clients/tests/test-client.py:1059:test_004()/85 cmd: $NMCLI --color yes dev show lang: C returncode: 0 @@ -4473,7 +4533,7 @@ IP6.DOMAIN[1]: sear6.fo.x.y <<< size: 8090 -location: clients/tests/test-client.py:1059:test_004()/84 +location: clients/tests/test-client.py:1059:test_004()/86 cmd: $NMCLI --color yes dev show lang: pl_PL.UTF-8 returncode: 0 @@ -4619,7 +4679,7 @@ IP6.DOMAIN[1]: sear6.fo.x.y <<< size: 20960 -location: clients/tests/test-client.py:1062:test_004()/85 +location: clients/tests/test-client.py:1062:test_004()/87 cmd: $NMCLI --color yes -f all dev show lang: C returncode: 0 @@ -5008,7 +5068,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 21110 -location: clients/tests/test-client.py:1062:test_004()/86 +location: clients/tests/test-client.py:1062:test_004()/88 cmd: $NMCLI --color yes -f all dev show lang: pl_PL.UTF-8 returncode: 0 @@ -5397,7 +5457,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 1510 -location: clients/tests/test-client.py:1065:test_004()/87 +location: clients/tests/test-client.py:1065:test_004()/89 cmd: $NMCLI --color yes dev show wlan0 lang: C returncode: 0 @@ -5430,7 +5490,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 1521 -location: clients/tests/test-client.py:1065:test_004()/88 +location: clients/tests/test-client.py:1065:test_004()/90 cmd: $NMCLI --color yes dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -5463,7 +5523,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 5075 -location: clients/tests/test-client.py:1068:test_004()/89 +location: clients/tests/test-client.py:1068:test_004()/91 cmd: $NMCLI --color yes -f all dev show wlan0 lang: C returncode: 0 @@ -5563,7 +5623,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 5130 -location: clients/tests/test-client.py:1068:test_004()/90 +location: clients/tests/test-client.py:1068:test_004()/92 cmd: $NMCLI --color yes -f all dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -5663,7 +5723,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 1972 -location: clients/tests/test-client.py:1071:test_004()/91 +location: clients/tests/test-client.py:1071:test_004()/93 cmd: $NMCLI --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -5708,7 +5768,7 @@ WIFI-PROPERTIES.5GHZ: unknown <<< size: 1996 -location: clients/tests/test-client.py:1071:test_004()/92 +location: clients/tests/test-client.py:1071:test_004()/94 cmd: $NMCLI --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -5753,7 +5813,7 @@ WIFI-PROPERTIES.5GHZ: nieznane <<< size: 1972 -location: clients/tests/test-client.py:1074:test_004()/93 +location: clients/tests/test-client.py:1074:test_004()/95 cmd: $NMCLI --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -5798,7 +5858,7 @@ WIFI-PROPERTIES.5GHZ: unknown <<< size: 1996 -location: clients/tests/test-client.py:1074:test_004()/94 +location: clients/tests/test-client.py:1074:test_004()/96 cmd: $NMCLI --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -5843,7 +5903,7 @@ WIFI-PROPERTIES.5GHZ: nieznane <<< size: 646 -location: clients/tests/test-client.py:1077:test_004()/95 +location: clients/tests/test-client.py:1077:test_004()/97 cmd: $NMCLI --color yes -f DEVICE,TYPE,DBUS-PATH dev lang: C returncode: 0 @@ -5858,7 +5918,7 @@ DEVICE TYPE DBUS-PATH <<< size: 656 -location: clients/tests/test-client.py:1077:test_004()/96 +location: clients/tests/test-client.py:1077:test_004()/98 cmd: $NMCLI --color yes -f DEVICE,TYPE,DBUS-PATH dev lang: pl_PL.UTF-8 returncode: 0 @@ -5873,7 +5933,7 @@ DEVICE TYPE DBUS-PATH <<< size: 2608 -location: clients/tests/test-client.py:1080:test_004()/97 +location: clients/tests/test-client.py:1080:test_004()/99 cmd: $NMCLI --color yes -f ALL device wifi list lang: C returncode: 0 @@ -5890,8 +5950,8 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA-FLAGS RSN-FLAGS DEVICE ACTIVE IN-USE DBUS-PATH <<< -size: 2676 -location: clients/tests/test-client.py:1080:test_004()/98 +size: 2677 +location: clients/tests/test-client.py:1080:test_004()/100 cmd: $NMCLI --color yes -f ALL device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -5908,8 +5968,8 @@ NAME SSID SSID-HEX BSSID MODE CHAN NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA-FLAGS RSN-FLAGS DEVICE ACTIVE IN-USE DBUS-PATH <<< -size: 918 -location: clients/tests/test-client.py:1082:test_004()/99 +size: 919 +location: clients/tests/test-client.py:1082:test_004()/101 cmd: $NMCLI --color yes -f COMMON device wifi list lang: C returncode: 0 @@ -5927,7 +5987,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 979 -location: clients/tests/test-client.py:1082:test_004()/100 +location: clients/tests/test-client.py:1082:test_004()/102 cmd: $NMCLI --color yes -f COMMON device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -5945,7 +6005,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 2722 -location: clients/tests/test-client.py:1085:test_004()/101 +location: clients/tests/test-client.py:1085:test_004()/103 cmd: $NMCLI --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: C returncode: 0 @@ -5963,7 +6023,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 2790 -location: clients/tests/test-client.py:1085:test_004()/102 +location: clients/tests/test-client.py:1085:test_004()/104 cmd: $NMCLI --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -5981,7 +6041,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 903 -location: clients/tests/test-client.py:1087:test_004()/103 +location: clients/tests/test-client.py:1087:test_004()/105 cmd: $NMCLI --color yes -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -5994,7 +6054,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ <<< size: 931 -location: clients/tests/test-client.py:1087:test_004()/104 +location: clients/tests/test-client.py:1087:test_004()/106 cmd: $NMCLI --color yes -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -6007,7 +6067,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN <<< size: 395 -location: clients/tests/test-client.py:1089:test_004()/105 +location: clients/tests/test-client.py:1089:test_004()/107 cmd: $NMCLI --color yes -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -6020,7 +6080,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 421 -location: clients/tests/test-client.py:1089:test_004()/106 +location: clients/tests/test-client.py:1089:test_004()/108 cmd: $NMCLI --color yes -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -6033,7 +6093,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 1016 -location: clients/tests/test-client.py:1092:test_004()/107 +location: clients/tests/test-client.py:1092:test_004()/109 cmd: $NMCLI --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -6046,7 +6106,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ <<< size: 1044 -location: clients/tests/test-client.py:1092:test_004()/108 +location: clients/tests/test-client.py:1092:test_004()/110 cmd: $NMCLI --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -6059,7 +6119,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN <<< size: 5079 -location: clients/tests/test-client.py:1094:test_004()/109 +location: clients/tests/test-client.py:1094:test_004()/111 cmd: $NMCLI --color yes -f ALL device show wlan0 lang: C returncode: 0 @@ -6159,7 +6219,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 5134 -location: clients/tests/test-client.py:1094:test_004()/110 +location: clients/tests/test-client.py:1094:test_004()/112 cmd: $NMCLI --color yes -f ALL device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -6259,7 +6319,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 1524 -location: clients/tests/test-client.py:1096:test_004()/111 +location: clients/tests/test-client.py:1096:test_004()/113 cmd: $NMCLI --color yes -f COMMON device show wlan0 lang: C returncode: 0 @@ -6292,7 +6352,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 1535 -location: clients/tests/test-client.py:1096:test_004()/112 +location: clients/tests/test-client.py:1096:test_004()/114 cmd: $NMCLI --color yes -f COMMON device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -6325,7 +6385,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 5217 -location: clients/tests/test-client.py:1098:test_004()/113 +location: clients/tests/test-client.py:1098:test_004()/115 cmd: $NMCLI --color yes -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: C returncode: 0 @@ -6425,7 +6485,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 5272 -location: clients/tests/test-client.py:1098:test_004()/114 +location: clients/tests/test-client.py:1098:test_004()/116 cmd: $NMCLI --color yes -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -6523,9 +6583,69 @@ DHCP6.OPTION[5]: dhcp-6-opt-5 = val-5 CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/Connection/{2} CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | con-xx1 +<<< +size: 1447 +location: clients/tests/test-client.py:1101:test_004()/117 +cmd: $NMCLI --color yes dev lldp list ifname eth0 +lang: C +returncode: 0 +stdout: 1288 bytes +>>> +NEIGHBOR[0].DEVICE: eth0 +NEIGHBOR[0].CHASSIS-ID: 00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID: Uplink port +NEIGHBOR[0].PORT-DESCRIPTION: GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME: test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION: Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES: 20 (mac-bridge,router) +NEIGHBOR[1].DEVICE: eth0 +NEIGHBOR[1].CHASSIS-ID: chassis1 +NEIGHBOR[1].PORT-ID: 44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION: GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME: test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION: Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES: 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +NEIGHBOR[2].DEVICE: eth0 +NEIGHBOR[2].CHASSIS-ID: 00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID: port1 +NEIGHBOR[2].PORT-DESCRIPTION: GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME: test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION: Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES: 40 (wlan-access-point,telephone) + +<<< +size: 1457 +location: clients/tests/test-client.py:1101:test_004()/118 +cmd: $NMCLI --color yes dev lldp list ifname eth0 +lang: pl_PL.UTF-8 +returncode: 0 +stdout: 1288 bytes +>>> +NEIGHBOR[0].DEVICE: eth0 +NEIGHBOR[0].CHASSIS-ID: 00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID: Uplink port +NEIGHBOR[0].PORT-DESCRIPTION: GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME: test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION: Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES: 20 (mac-bridge,router) +NEIGHBOR[1].DEVICE: eth0 +NEIGHBOR[1].CHASSIS-ID: chassis1 +NEIGHBOR[1].PORT-ID: 44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION: GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME: test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION: Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES: 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +NEIGHBOR[2].DEVICE: eth0 +NEIGHBOR[2].CHASSIS-ID: 00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID: port1 +NEIGHBOR[2].PORT-DESCRIPTION: GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME: test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION: Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES: 40 (wlan-access-point,telephone) + <<< size: 5625 -location: clients/tests/test-client.py:1036:test_004()/115 +location: clients/tests/test-client.py:1036:test_004()/119 cmd: $NMCLI --pretty con s con-vpn-1 lang: C returncode: 0 @@ -6640,7 +6760,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 5667 -location: clients/tests/test-client.py:1036:test_004()/116 +location: clients/tests/test-client.py:1036:test_004()/120 cmd: $NMCLI --pretty con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -6755,7 +6875,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 5625 -location: clients/tests/test-client.py:1038:test_004()/117 +location: clients/tests/test-client.py:1038:test_004()/121 cmd: $NMCLI --pretty con s con-vpn-1 lang: C returncode: 0 @@ -6870,7 +6990,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 5667 -location: clients/tests/test-client.py:1038:test_004()/118 +location: clients/tests/test-client.py:1038:test_004()/122 cmd: $NMCLI --pretty con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -6985,7 +7105,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 4151 -location: clients/tests/test-client.py:1041:test_004()/119 +location: clients/tests/test-client.py:1041:test_004()/123 cmd: $NMCLI --pretty -f ALL con s con-vpn-1 lang: C returncode: 0 @@ -7075,7 +7195,7 @@ proxy.pac-script: -- <<< size: 4176 -location: clients/tests/test-client.py:1041:test_004()/120 +location: clients/tests/test-client.py:1041:test_004()/124 cmd: $NMCLI --pretty -f ALL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -7165,7 +7285,7 @@ proxy.pac-script: -- <<< size: 785 -location: clients/tests/test-client.py:1047:test_004()/121 +location: clients/tests/test-client.py:1047:test_004()/125 cmd: $NMCLI --pretty -f VPN con s con-vpn-1 lang: C returncode: 0 @@ -7184,7 +7304,7 @@ vpn.timeout: 0 <<< size: 801 -location: clients/tests/test-client.py:1047:test_004()/122 +location: clients/tests/test-client.py:1047:test_004()/126 cmd: $NMCLI --pretty -f VPN con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -7203,7 +7323,7 @@ vpn.timeout: 0 <<< size: 1136 -location: clients/tests/test-client.py:1050:test_004()/123 +location: clients/tests/test-client.py:1050:test_004()/127 cmd: $NMCLI --pretty -f GENERAL con s con-vpn-1 lang: C returncode: 0 @@ -7228,7 +7348,7 @@ GENERAL.MASTER-PATH: -- <<< size: 1156 -location: clients/tests/test-client.py:1050:test_004()/124 +location: clients/tests/test-client.py:1050:test_004()/128 cmd: $NMCLI --pretty -f GENERAL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -7253,7 +7373,7 @@ GENERAL.MASTER-PATH: -- <<< size: 522 -location: clients/tests/test-client.py:1053:test_004()/125 +location: clients/tests/test-client.py:1053:test_004()/129 cmd: $NMCLI --pretty dev s lang: C returncode: 0 @@ -7272,7 +7392,7 @@ wlan1 wifi unavailable -- <<< size: 530 -location: clients/tests/test-client.py:1053:test_004()/126 +location: clients/tests/test-client.py:1053:test_004()/130 cmd: $NMCLI --pretty dev s lang: pl_PL.UTF-8 returncode: 0 @@ -7291,7 +7411,7 @@ wlan1 wifi niedostępne -- <<< size: 1718 -location: clients/tests/test-client.py:1056:test_004()/127 +location: clients/tests/test-client.py:1056:test_004()/131 cmd: $NMCLI --pretty -f all dev status lang: C returncode: 0 @@ -7310,7 +7430,7 @@ wlan1 wifi unavailable unknown unknown /org/freedesk <<< size: 1726 -location: clients/tests/test-client.py:1056:test_004()/128 +location: clients/tests/test-client.py:1056:test_004()/132 cmd: $NMCLI --pretty -f all dev status lang: pl_PL.UTF-8 returncode: 0 @@ -7329,7 +7449,7 @@ wlan1 wifi niedostępne nieznane nieznane /org/freedes <<< size: 12873 -location: clients/tests/test-client.py:1059:test_004()/129 +location: clients/tests/test-client.py:1059:test_004()/133 cmd: $NMCLI --pretty dev show lang: C returncode: 0 @@ -7537,7 +7657,7 @@ IP6.DOMAIN[1]: sear6.fo.x.y <<< size: 12937 -location: clients/tests/test-client.py:1059:test_004()/130 +location: clients/tests/test-client.py:1059:test_004()/134 cmd: $NMCLI --pretty dev show lang: pl_PL.UTF-8 returncode: 0 @@ -7745,7 +7865,7 @@ IP6.DOMAIN[1]: sear6.fo.x.y <<< size: 25245 -location: clients/tests/test-client.py:1062:test_004()/131 +location: clients/tests/test-client.py:1062:test_004()/135 cmd: $NMCLI --pretty -f all dev show lang: C returncode: 0 @@ -8193,7 +8313,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 25428 -location: clients/tests/test-client.py:1062:test_004()/132 +location: clients/tests/test-client.py:1062:test_004()/136 cmd: $NMCLI --pretty -f all dev show lang: pl_PL.UTF-8 returncode: 0 @@ -8641,7 +8761,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 2439 -location: clients/tests/test-client.py:1065:test_004()/133 +location: clients/tests/test-client.py:1065:test_004()/137 cmd: $NMCLI --pretty dev show wlan0 lang: C returncode: 0 @@ -8686,7 +8806,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 2457 -location: clients/tests/test-client.py:1065:test_004()/134 +location: clients/tests/test-client.py:1065:test_004()/138 cmd: $NMCLI --pretty dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -8731,7 +8851,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 5948 -location: clients/tests/test-client.py:1068:test_004()/135 +location: clients/tests/test-client.py:1068:test_004()/139 cmd: $NMCLI --pretty -f all dev show wlan0 lang: C returncode: 0 @@ -8845,7 +8965,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 6010 -location: clients/tests/test-client.py:1068:test_004()/136 +location: clients/tests/test-client.py:1068:test_004()/140 cmd: $NMCLI --pretty -f all dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -8959,7 +9079,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 2421 -location: clients/tests/test-client.py:1071:test_004()/137 +location: clients/tests/test-client.py:1071:test_004()/141 cmd: $NMCLI --pretty -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -9010,7 +9130,7 @@ WIFI-PROPERTIES.5GHZ: unknown <<< size: 2452 -location: clients/tests/test-client.py:1071:test_004()/138 +location: clients/tests/test-client.py:1071:test_004()/142 cmd: $NMCLI --pretty -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -9061,7 +9181,7 @@ WIFI-PROPERTIES.5GHZ: nieznane <<< size: 2421 -location: clients/tests/test-client.py:1074:test_004()/139 +location: clients/tests/test-client.py:1074:test_004()/143 cmd: $NMCLI --pretty -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -9112,7 +9232,7 @@ WIFI-PROPERTIES.5GHZ: unknown <<< size: 2452 -location: clients/tests/test-client.py:1074:test_004()/140 +location: clients/tests/test-client.py:1074:test_004()/144 cmd: $NMCLI --pretty -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -9163,7 +9283,7 @@ WIFI-PROPERTIES.5GHZ: nieznane <<< size: 671 -location: clients/tests/test-client.py:1077:test_004()/141 +location: clients/tests/test-client.py:1077:test_004()/145 cmd: $NMCLI --pretty -f DEVICE,TYPE,DBUS-PATH dev lang: C returncode: 0 @@ -9182,7 +9302,7 @@ wlan1 wifi /org/freedesktop/NetworkManager/Devices/5 <<< size: 674 -location: clients/tests/test-client.py:1077:test_004()/142 +location: clients/tests/test-client.py:1077:test_004()/146 cmd: $NMCLI --pretty -f DEVICE,TYPE,DBUS-PATH dev lang: pl_PL.UTF-8 returncode: 0 @@ -9201,7 +9321,7 @@ wlan1 wifi /org/freedesktop/NetworkManager/Devices/5 <<< size: 3026 -location: clients/tests/test-client.py:1080:test_004()/143 +location: clients/tests/test-client.py:1080:test_004()/147 cmd: $NMCLI --pretty -f ALL device wifi list lang: C returncode: 0 @@ -9231,7 +9351,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 3264 -location: clients/tests/test-client.py:1080:test_004()/144 +location: clients/tests/test-client.py:1080:test_004()/148 cmd: $NMCLI --pretty -f ALL device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -9261,7 +9381,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 1152 -location: clients/tests/test-client.py:1082:test_004()/145 +location: clients/tests/test-client.py:1082:test_004()/149 cmd: $NMCLI --pretty -f COMMON device wifi list lang: C returncode: 0 @@ -9291,7 +9411,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 1383 -location: clients/tests/test-client.py:1082:test_004()/146 +location: clients/tests/test-client.py:1082:test_004()/150 cmd: $NMCLI --pretty -f COMMON device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -9321,7 +9441,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 3139 -location: clients/tests/test-client.py:1085:test_004()/147 +location: clients/tests/test-client.py:1085:test_004()/151 cmd: $NMCLI --pretty -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: C returncode: 0 @@ -9351,7 +9471,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 3377 -location: clients/tests/test-client.py:1085:test_004()/148 +location: clients/tests/test-client.py:1085:test_004()/152 cmd: $NMCLI --pretty -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -9381,7 +9501,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 1141 -location: clients/tests/test-client.py:1087:test_004()/149 +location: clients/tests/test-client.py:1087:test_004()/153 cmd: $NMCLI --pretty -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -9398,7 +9518,7 @@ AP[1] wlan0-ap-2 776C616E302D61702D32 C0:E2:BE:E8:EF:B6 Infra 1 2412 MH <<< size: 1229 -location: clients/tests/test-client.py:1087:test_004()/150 +location: clients/tests/test-client.py:1087:test_004()/154 cmd: $NMCLI --pretty -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -9415,7 +9535,7 @@ AP[1] wlan0-ap-2 776C616E302D61702D32 C0:E2:BE:E8:EF:B6 Infrastruktura 1 <<< size: 499 -location: clients/tests/test-client.py:1089:test_004()/151 +location: clients/tests/test-client.py:1089:test_004()/155 cmd: $NMCLI --pretty -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -9432,7 +9552,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 584 -location: clients/tests/test-client.py:1089:test_004()/152 +location: clients/tests/test-client.py:1089:test_004()/156 cmd: $NMCLI --pretty -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -9449,7 +9569,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 1254 -location: clients/tests/test-client.py:1092:test_004()/153 +location: clients/tests/test-client.py:1092:test_004()/157 cmd: $NMCLI --pretty -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -9466,7 +9586,7 @@ AP[1] wlan0-ap-2 776C616E302D61702D32 C0:E2:BE:E8:EF:B6 Infra 1 2412 MH <<< size: 1342 -location: clients/tests/test-client.py:1092:test_004()/154 +location: clients/tests/test-client.py:1092:test_004()/158 cmd: $NMCLI --pretty -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -9483,7 +9603,7 @@ AP[1] wlan0-ap-2 776C616E302D61702D32 C0:E2:BE:E8:EF:B6 Infrastruktura 1 <<< size: 5951 -location: clients/tests/test-client.py:1094:test_004()/155 +location: clients/tests/test-client.py:1094:test_004()/159 cmd: $NMCLI --pretty -f ALL device show wlan0 lang: C returncode: 0 @@ -9597,7 +9717,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 6013 -location: clients/tests/test-client.py:1094:test_004()/156 +location: clients/tests/test-client.py:1094:test_004()/160 cmd: $NMCLI --pretty -f ALL device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -9711,7 +9831,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 2452 -location: clients/tests/test-client.py:1096:test_004()/157 +location: clients/tests/test-client.py:1096:test_004()/161 cmd: $NMCLI --pretty -f COMMON device show wlan0 lang: C returncode: 0 @@ -9756,7 +9876,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 2470 -location: clients/tests/test-client.py:1096:test_004()/158 +location: clients/tests/test-client.py:1096:test_004()/162 cmd: $NMCLI --pretty -f COMMON device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -9801,7 +9921,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 6089 -location: clients/tests/test-client.py:1098:test_004()/159 +location: clients/tests/test-client.py:1098:test_004()/163 cmd: $NMCLI --pretty -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: C returncode: 0 @@ -9915,7 +10035,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 6151 -location: clients/tests/test-client.py:1098:test_004()/160 +location: clients/tests/test-client.py:1098:test_004()/164 cmd: $NMCLI --pretty -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -10027,9 +10147,81 @@ CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | con-xx1 ------------------------------------------------------------------------------- +<<< +size: 1898 +location: clients/tests/test-client.py:1101:test_004()/165 +cmd: $NMCLI --pretty dev lldp list ifname eth0 +lang: C +returncode: 0 +stdout: 1742 bytes +>>> +=============================================================================== + Device LLDP neighbors (eth0) +=============================================================================== +NEIGHBOR[0].DEVICE: eth0 +NEIGHBOR[0].CHASSIS-ID: 00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID: Uplink port +NEIGHBOR[0].PORT-DESCRIPTION: GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME: test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION: Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES: 20 (mac-bridge,router) +------------------------------------------------------------------------------- +NEIGHBOR[1].DEVICE: eth0 +NEIGHBOR[1].CHASSIS-ID: chassis1 +NEIGHBOR[1].PORT-ID: 44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION: GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME: test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION: Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES: 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +------------------------------------------------------------------------------- +NEIGHBOR[2].DEVICE: eth0 +NEIGHBOR[2].CHASSIS-ID: 00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID: port1 +NEIGHBOR[2].PORT-DESCRIPTION: GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME: test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION: Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES: 40 (wlan-access-point,telephone) +------------------------------------------------------------------------------- + +<<< +size: 1912 +location: clients/tests/test-client.py:1101:test_004()/166 +cmd: $NMCLI --pretty dev lldp list ifname eth0 +lang: pl_PL.UTF-8 +returncode: 0 +stdout: 1746 bytes +>>> +=============================================================================== + Sąsiedzi LLDP urządzenia (eth0) +=============================================================================== +NEIGHBOR[0].DEVICE: eth0 +NEIGHBOR[0].CHASSIS-ID: 00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID: Uplink port +NEIGHBOR[0].PORT-DESCRIPTION: GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME: test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION: Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES: 20 (mac-bridge,router) +------------------------------------------------------------------------------- +NEIGHBOR[1].DEVICE: eth0 +NEIGHBOR[1].CHASSIS-ID: chassis1 +NEIGHBOR[1].PORT-ID: 44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION: GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME: test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION: Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES: 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +------------------------------------------------------------------------------- +NEIGHBOR[2].DEVICE: eth0 +NEIGHBOR[2].CHASSIS-ID: 00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID: port1 +NEIGHBOR[2].PORT-DESCRIPTION: GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME: test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION: Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES: 40 (wlan-access-point,telephone) +------------------------------------------------------------------------------- + <<< size: 5637 -location: clients/tests/test-client.py:1036:test_004()/161 +location: clients/tests/test-client.py:1036:test_004()/167 cmd: $NMCLI --pretty --color yes con s con-vpn-1 lang: C returncode: 0 @@ -10144,7 +10336,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 5679 -location: clients/tests/test-client.py:1036:test_004()/162 +location: clients/tests/test-client.py:1036:test_004()/168 cmd: $NMCLI --pretty --color yes con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -10259,7 +10451,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 5637 -location: clients/tests/test-client.py:1038:test_004()/163 +location: clients/tests/test-client.py:1038:test_004()/169 cmd: $NMCLI --pretty --color yes con s con-vpn-1 lang: C returncode: 0 @@ -10374,7 +10566,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 5679 -location: clients/tests/test-client.py:1038:test_004()/164 +location: clients/tests/test-client.py:1038:test_004()/170 cmd: $NMCLI --pretty --color yes con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -10489,7 +10681,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 4163 -location: clients/tests/test-client.py:1041:test_004()/165 +location: clients/tests/test-client.py:1041:test_004()/171 cmd: $NMCLI --pretty --color yes -f ALL con s con-vpn-1 lang: C returncode: 0 @@ -10579,7 +10771,7 @@ proxy.pac-script: -- <<< size: 4188 -location: clients/tests/test-client.py:1041:test_004()/166 +location: clients/tests/test-client.py:1041:test_004()/172 cmd: $NMCLI --pretty --color yes -f ALL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -10669,7 +10861,7 @@ proxy.pac-script: -- <<< size: 797 -location: clients/tests/test-client.py:1047:test_004()/167 +location: clients/tests/test-client.py:1047:test_004()/173 cmd: $NMCLI --pretty --color yes -f VPN con s con-vpn-1 lang: C returncode: 0 @@ -10688,7 +10880,7 @@ vpn.timeout: 0 <<< size: 813 -location: clients/tests/test-client.py:1047:test_004()/168 +location: clients/tests/test-client.py:1047:test_004()/174 cmd: $NMCLI --pretty --color yes -f VPN con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -10707,7 +10899,7 @@ vpn.timeout: 0 <<< size: 1148 -location: clients/tests/test-client.py:1050:test_004()/169 +location: clients/tests/test-client.py:1050:test_004()/175 cmd: $NMCLI --pretty --color yes -f GENERAL con s con-vpn-1 lang: C returncode: 0 @@ -10732,7 +10924,7 @@ GENERAL.MASTER-PATH: -- <<< size: 1168 -location: clients/tests/test-client.py:1050:test_004()/170 +location: clients/tests/test-client.py:1050:test_004()/176 cmd: $NMCLI --pretty --color yes -f GENERAL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -10757,7 +10949,7 @@ GENERAL.MASTER-PATH: -- <<< size: 694 -location: clients/tests/test-client.py:1053:test_004()/171 +location: clients/tests/test-client.py:1053:test_004()/177 cmd: $NMCLI --pretty --color yes dev s lang: C returncode: 0 @@ -10776,7 +10968,7 @@ DEVICE TYPE STATE CONNECTION <<< size: 702 -location: clients/tests/test-client.py:1053:test_004()/172 +location: clients/tests/test-client.py:1053:test_004()/178 cmd: $NMCLI --pretty --color yes dev s lang: pl_PL.UTF-8 returncode: 0 @@ -10795,7 +10987,7 @@ DEVICE TYPE STATE CONNECTION <<< size: 2090 -location: clients/tests/test-client.py:1056:test_004()/173 +location: clients/tests/test-client.py:1056:test_004()/179 cmd: $NMCLI --pretty --color yes -f all dev status lang: C returncode: 0 @@ -10814,7 +11006,7 @@ DEVICE TYPE STATE IP4-CONNECTIVITY IP6-CONNECTIVITY DBUS-PATH <<< size: 2098 -location: clients/tests/test-client.py:1056:test_004()/174 +location: clients/tests/test-client.py:1056:test_004()/180 cmd: $NMCLI --pretty --color yes -f all dev status lang: pl_PL.UTF-8 returncode: 0 @@ -10833,7 +11025,7 @@ DEVICE TYPE STATE IP4-CONNECTIVITY IP6-CONNECTIVITY DBUS-PATH <<< size: 12885 -location: clients/tests/test-client.py:1059:test_004()/175 +location: clients/tests/test-client.py:1059:test_004()/181 cmd: $NMCLI --pretty --color yes dev show lang: C returncode: 0 @@ -11041,7 +11233,7 @@ IP6.DOMAIN[1]: sear6.fo.x.y <<< size: 12949 -location: clients/tests/test-client.py:1059:test_004()/176 +location: clients/tests/test-client.py:1059:test_004()/182 cmd: $NMCLI --pretty --color yes dev show lang: pl_PL.UTF-8 returncode: 0 @@ -11249,7 +11441,7 @@ IP6.DOMAIN[1]: sear6.fo.x.y <<< size: 25545 -location: clients/tests/test-client.py:1062:test_004()/177 +location: clients/tests/test-client.py:1062:test_004()/183 cmd: $NMCLI --pretty --color yes -f all dev show lang: C returncode: 0 @@ -11697,7 +11889,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 25728 -location: clients/tests/test-client.py:1062:test_004()/178 +location: clients/tests/test-client.py:1062:test_004()/184 cmd: $NMCLI --pretty --color yes -f all dev show lang: pl_PL.UTF-8 returncode: 0 @@ -12145,7 +12337,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 2451 -location: clients/tests/test-client.py:1065:test_004()/179 +location: clients/tests/test-client.py:1065:test_004()/185 cmd: $NMCLI --pretty --color yes dev show wlan0 lang: C returncode: 0 @@ -12190,7 +12382,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 2469 -location: clients/tests/test-client.py:1065:test_004()/180 +location: clients/tests/test-client.py:1065:test_004()/186 cmd: $NMCLI --pretty --color yes dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -12235,7 +12427,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 6176 -location: clients/tests/test-client.py:1068:test_004()/181 +location: clients/tests/test-client.py:1068:test_004()/187 cmd: $NMCLI --pretty --color yes -f all dev show wlan0 lang: C returncode: 0 @@ -12349,7 +12541,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 6238 -location: clients/tests/test-client.py:1068:test_004()/182 +location: clients/tests/test-client.py:1068:test_004()/188 cmd: $NMCLI --pretty --color yes -f all dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -12463,7 +12655,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 2433 -location: clients/tests/test-client.py:1071:test_004()/183 +location: clients/tests/test-client.py:1071:test_004()/189 cmd: $NMCLI --pretty --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -12514,7 +12706,7 @@ WIFI-PROPERTIES.5GHZ: unknown <<< size: 2464 -location: clients/tests/test-client.py:1071:test_004()/184 +location: clients/tests/test-client.py:1071:test_004()/190 cmd: $NMCLI --pretty --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -12565,7 +12757,7 @@ WIFI-PROPERTIES.5GHZ: nieznane <<< size: 2433 -location: clients/tests/test-client.py:1074:test_004()/185 +location: clients/tests/test-client.py:1074:test_004()/191 cmd: $NMCLI --pretty --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -12616,7 +12808,7 @@ WIFI-PROPERTIES.5GHZ: unknown <<< size: 2464 -location: clients/tests/test-client.py:1074:test_004()/186 +location: clients/tests/test-client.py:1074:test_004()/192 cmd: $NMCLI --pretty --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -12667,7 +12859,7 @@ WIFI-PROPERTIES.5GHZ: nieznane <<< size: 803 -location: clients/tests/test-client.py:1077:test_004()/187 +location: clients/tests/test-client.py:1077:test_004()/193 cmd: $NMCLI --pretty --color yes -f DEVICE,TYPE,DBUS-PATH dev lang: C returncode: 0 @@ -12686,7 +12878,7 @@ DEVICE TYPE DBUS-PATH <<< size: 806 -location: clients/tests/test-client.py:1077:test_004()/188 +location: clients/tests/test-client.py:1077:test_004()/194 cmd: $NMCLI --pretty --color yes -f DEVICE,TYPE,DBUS-PATH dev lang: pl_PL.UTF-8 returncode: 0 @@ -12705,7 +12897,7 @@ DEVICE TYPE DBUS-PATH <<< size: 3650 -location: clients/tests/test-client.py:1080:test_004()/189 +location: clients/tests/test-client.py:1080:test_004()/195 cmd: $NMCLI --pretty --color yes -f ALL device wifi list lang: C returncode: 0 @@ -12735,7 +12927,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 3888 -location: clients/tests/test-client.py:1080:test_004()/190 +location: clients/tests/test-client.py:1080:test_004()/196 cmd: $NMCLI --pretty --color yes -f ALL device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -12765,7 +12957,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 1453 -location: clients/tests/test-client.py:1082:test_004()/191 +location: clients/tests/test-client.py:1082:test_004()/197 cmd: $NMCLI --pretty --color yes -f COMMON device wifi list lang: C returncode: 0 @@ -12795,7 +12987,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 1683 -location: clients/tests/test-client.py:1082:test_004()/192 +location: clients/tests/test-client.py:1082:test_004()/198 cmd: $NMCLI --pretty --color yes -f COMMON device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -12825,7 +13017,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 3763 -location: clients/tests/test-client.py:1085:test_004()/193 +location: clients/tests/test-client.py:1085:test_004()/199 cmd: $NMCLI --pretty --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: C returncode: 0 @@ -12855,7 +13047,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 4001 -location: clients/tests/test-client.py:1085:test_004()/194 +location: clients/tests/test-client.py:1085:test_004()/200 cmd: $NMCLI --pretty --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -12885,7 +13077,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 1307 -location: clients/tests/test-client.py:1087:test_004()/195 +location: clients/tests/test-client.py:1087:test_004()/201 cmd: $NMCLI --pretty --color yes -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -12902,7 +13094,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ <<< size: 1394 -location: clients/tests/test-client.py:1087:test_004()/196 +location: clients/tests/test-client.py:1087:test_004()/202 cmd: $NMCLI --pretty --color yes -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -12919,7 +13111,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN <<< size: 583 -location: clients/tests/test-client.py:1089:test_004()/197 +location: clients/tests/test-client.py:1089:test_004()/203 cmd: $NMCLI --pretty --color yes -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -12936,7 +13128,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 668 -location: clients/tests/test-client.py:1089:test_004()/198 +location: clients/tests/test-client.py:1089:test_004()/204 cmd: $NMCLI --pretty --color yes -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -12953,7 +13145,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 1420 -location: clients/tests/test-client.py:1092:test_004()/199 +location: clients/tests/test-client.py:1092:test_004()/205 cmd: $NMCLI --pretty --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -12970,7 +13162,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ <<< size: 1507 -location: clients/tests/test-client.py:1092:test_004()/200 +location: clients/tests/test-client.py:1092:test_004()/206 cmd: $NMCLI --pretty --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -12987,7 +13179,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN <<< size: 6179 -location: clients/tests/test-client.py:1094:test_004()/201 +location: clients/tests/test-client.py:1094:test_004()/207 cmd: $NMCLI --pretty --color yes -f ALL device show wlan0 lang: C returncode: 0 @@ -13101,7 +13293,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 6241 -location: clients/tests/test-client.py:1094:test_004()/202 +location: clients/tests/test-client.py:1094:test_004()/208 cmd: $NMCLI --pretty --color yes -f ALL device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -13215,7 +13407,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 2464 -location: clients/tests/test-client.py:1096:test_004()/203 +location: clients/tests/test-client.py:1096:test_004()/209 cmd: $NMCLI --pretty --color yes -f COMMON device show wlan0 lang: C returncode: 0 @@ -13260,7 +13452,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 2482 -location: clients/tests/test-client.py:1096:test_004()/204 +location: clients/tests/test-client.py:1096:test_004()/210 cmd: $NMCLI --pretty --color yes -f COMMON device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -13305,7 +13497,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 6317 -location: clients/tests/test-client.py:1098:test_004()/205 +location: clients/tests/test-client.py:1098:test_004()/211 cmd: $NMCLI --pretty --color yes -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: C returncode: 0 @@ -13419,7 +13611,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 6379 -location: clients/tests/test-client.py:1098:test_004()/206 +location: clients/tests/test-client.py:1098:test_004()/212 cmd: $NMCLI --pretty --color yes -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -13531,9 +13723,81 @@ CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | con-xx1 ------------------------------------------------------------------------------- +<<< +size: 1910 +location: clients/tests/test-client.py:1101:test_004()/213 +cmd: $NMCLI --pretty --color yes dev lldp list ifname eth0 +lang: C +returncode: 0 +stdout: 1742 bytes +>>> +=============================================================================== + Device LLDP neighbors (eth0) +=============================================================================== +NEIGHBOR[0].DEVICE: eth0 +NEIGHBOR[0].CHASSIS-ID: 00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID: Uplink port +NEIGHBOR[0].PORT-DESCRIPTION: GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME: test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION: Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES: 20 (mac-bridge,router) +------------------------------------------------------------------------------- +NEIGHBOR[1].DEVICE: eth0 +NEIGHBOR[1].CHASSIS-ID: chassis1 +NEIGHBOR[1].PORT-ID: 44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION: GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME: test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION: Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES: 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +------------------------------------------------------------------------------- +NEIGHBOR[2].DEVICE: eth0 +NEIGHBOR[2].CHASSIS-ID: 00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID: port1 +NEIGHBOR[2].PORT-DESCRIPTION: GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME: test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION: Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES: 40 (wlan-access-point,telephone) +------------------------------------------------------------------------------- + +<<< +size: 1924 +location: clients/tests/test-client.py:1101:test_004()/214 +cmd: $NMCLI --pretty --color yes dev lldp list ifname eth0 +lang: pl_PL.UTF-8 +returncode: 0 +stdout: 1746 bytes +>>> +=============================================================================== + Sąsiedzi LLDP urządzenia (eth0) +=============================================================================== +NEIGHBOR[0].DEVICE: eth0 +NEIGHBOR[0].CHASSIS-ID: 00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID: Uplink port +NEIGHBOR[0].PORT-DESCRIPTION: GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME: test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION: Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES: 20 (mac-bridge,router) +------------------------------------------------------------------------------- +NEIGHBOR[1].DEVICE: eth0 +NEIGHBOR[1].CHASSIS-ID: chassis1 +NEIGHBOR[1].PORT-ID: 44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION: GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME: test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION: Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES: 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +------------------------------------------------------------------------------- +NEIGHBOR[2].DEVICE: eth0 +NEIGHBOR[2].CHASSIS-ID: 00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID: port1 +NEIGHBOR[2].PORT-DESCRIPTION: GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME: test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION: Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES: 40 (wlan-access-point,telephone) +------------------------------------------------------------------------------- + <<< size: 2323 -location: clients/tests/test-client.py:1036:test_004()/207 +location: clients/tests/test-client.py:1036:test_004()/215 cmd: $NMCLI --terse con s con-vpn-1 lang: C returncode: 0 @@ -13635,7 +13899,7 @@ VPN.CFG[3]:key3 = val3 <<< size: 2333 -location: clients/tests/test-client.py:1036:test_004()/208 +location: clients/tests/test-client.py:1036:test_004()/216 cmd: $NMCLI --terse con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -13737,7 +14001,7 @@ VPN.CFG[3]:key3 = val3 <<< size: 2323 -location: clients/tests/test-client.py:1038:test_004()/209 +location: clients/tests/test-client.py:1038:test_004()/217 cmd: $NMCLI --terse con s con-vpn-1 lang: C returncode: 0 @@ -13839,7 +14103,7 @@ VPN.CFG[3]:key3 = val3 <<< size: 2333 -location: clients/tests/test-client.py:1038:test_004()/210 +location: clients/tests/test-client.py:1038:test_004()/218 cmd: $NMCLI --terse con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -13941,7 +14205,7 @@ VPN.CFG[3]:key3 = val3 <<< size: 1771 -location: clients/tests/test-client.py:1041:test_004()/211 +location: clients/tests/test-client.py:1041:test_004()/219 cmd: $NMCLI --terse -f ALL con s con-vpn-1 lang: C returncode: 0 @@ -14023,7 +14287,7 @@ proxy.pac-script: <<< size: 1781 -location: clients/tests/test-client.py:1041:test_004()/212 +location: clients/tests/test-client.py:1041:test_004()/220 cmd: $NMCLI --terse -f ALL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -14105,7 +14369,7 @@ proxy.pac-script: <<< size: 322 -location: clients/tests/test-client.py:1047:test_004()/213 +location: clients/tests/test-client.py:1047:test_004()/221 cmd: $NMCLI --terse -f VPN con s con-vpn-1 lang: C returncode: 0 @@ -14120,7 +14384,7 @@ vpn.timeout:0 <<< size: 332 -location: clients/tests/test-client.py:1047:test_004()/214 +location: clients/tests/test-client.py:1047:test_004()/222 cmd: $NMCLI --terse -f VPN con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -14135,7 +14399,7 @@ vpn.timeout:0 <<< size: 525 -location: clients/tests/test-client.py:1050:test_004()/215 +location: clients/tests/test-client.py:1050:test_004()/223 cmd: $NMCLI --terse -f GENERAL con s con-vpn-1 lang: C returncode: 0 @@ -14156,7 +14420,7 @@ GENERAL.MASTER-PATH: <<< size: 535 -location: clients/tests/test-client.py:1050:test_004()/216 +location: clients/tests/test-client.py:1050:test_004()/224 cmd: $NMCLI --terse -f GENERAL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -14177,7 +14441,7 @@ GENERAL.MASTER-PATH: <<< size: 269 -location: clients/tests/test-client.py:1053:test_004()/217 +location: clients/tests/test-client.py:1053:test_004()/225 cmd: $NMCLI --terse dev s lang: C returncode: 0 @@ -14191,7 +14455,7 @@ wlan1:wifi:unavailable: <<< size: 279 -location: clients/tests/test-client.py:1053:test_004()/218 +location: clients/tests/test-client.py:1053:test_004()/226 cmd: $NMCLI --terse dev s lang: pl_PL.UTF-8 returncode: 0 @@ -14205,7 +14469,7 @@ wlan1:wifi:unavailable: <<< size: 667 -location: clients/tests/test-client.py:1056:test_004()/219 +location: clients/tests/test-client.py:1056:test_004()/227 cmd: $NMCLI --terse -f all dev status lang: C returncode: 0 @@ -14219,7 +14483,7 @@ wlan1:wifi:unavailable:unknown:unknown:/org/freedesktop/NetworkManager/Devices/5 <<< size: 677 -location: clients/tests/test-client.py:1056:test_004()/220 +location: clients/tests/test-client.py:1056:test_004()/228 cmd: $NMCLI --terse -f all dev status lang: pl_PL.UTF-8 returncode: 0 @@ -14233,7 +14497,7 @@ wlan1:wifi:unavailable:unknown:unknown:/org/freedesktop/NetworkManager/Devices/5 <<< size: 4540 -location: clients/tests/test-client.py:1059:test_004()/221 +location: clients/tests/test-client.py:1059:test_004()/229 cmd: $NMCLI --terse dev show lang: C returncode: 0 @@ -14379,7 +14643,7 @@ IP6.DOMAIN[1]:sear6.fo.x.y <<< size: 4550 -location: clients/tests/test-client.py:1059:test_004()/222 +location: clients/tests/test-client.py:1059:test_004()/230 cmd: $NMCLI --terse dev show lang: pl_PL.UTF-8 returncode: 0 @@ -14525,7 +14789,7 @@ IP6.DOMAIN[1]:sear6.fo.x.y <<< size: 11927 -location: clients/tests/test-client.py:1062:test_004()/223 +location: clients/tests/test-client.py:1062:test_004()/231 cmd: $NMCLI --terse -f all dev show lang: C returncode: 0 @@ -14914,7 +15178,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 11973 -location: clients/tests/test-client.py:1062:test_004()/224 +location: clients/tests/test-client.py:1062:test_004()/232 cmd: $NMCLI --terse -f all dev show lang: pl_PL.UTF-8 returncode: 0 @@ -15303,7 +15567,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 882 -location: clients/tests/test-client.py:1065:test_004()/225 +location: clients/tests/test-client.py:1065:test_004()/233 cmd: $NMCLI --terse dev show wlan0 lang: C returncode: 0 @@ -15336,7 +15600,7 @@ IP6.DOMAIN[6]:sear6.foo4.bar <<< size: 892 -location: clients/tests/test-client.py:1065:test_004()/226 +location: clients/tests/test-client.py:1065:test_004()/234 cmd: $NMCLI --terse dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -15369,7 +15633,7 @@ IP6.DOMAIN[6]:sear6.foo4.bar <<< size: 2693 -location: clients/tests/test-client.py:1068:test_004()/227 +location: clients/tests/test-client.py:1068:test_004()/235 cmd: $NMCLI --terse -f all dev show wlan0 lang: C returncode: 0 @@ -15469,7 +15733,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 2730 -location: clients/tests/test-client.py:1068:test_004()/228 +location: clients/tests/test-client.py:1068:test_004()/236 cmd: $NMCLI --terse -f all dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -15569,7 +15833,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 1191 -location: clients/tests/test-client.py:1071:test_004()/229 +location: clients/tests/test-client.py:1071:test_004()/237 cmd: $NMCLI --terse -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -15614,7 +15878,7 @@ WIFI-PROPERTIES.5GHZ:unknown <<< size: 1201 -location: clients/tests/test-client.py:1071:test_004()/230 +location: clients/tests/test-client.py:1071:test_004()/238 cmd: $NMCLI --terse -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -15659,7 +15923,7 @@ WIFI-PROPERTIES.5GHZ:unknown <<< size: 1191 -location: clients/tests/test-client.py:1074:test_004()/231 +location: clients/tests/test-client.py:1074:test_004()/239 cmd: $NMCLI --terse -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -15704,7 +15968,7 @@ WIFI-PROPERTIES.5GHZ:unknown <<< size: 1201 -location: clients/tests/test-client.py:1074:test_004()/232 +location: clients/tests/test-client.py:1074:test_004()/240 cmd: $NMCLI --terse -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -15749,7 +16013,7 @@ WIFI-PROPERTIES.5GHZ:unknown <<< size: 428 -location: clients/tests/test-client.py:1077:test_004()/233 +location: clients/tests/test-client.py:1077:test_004()/241 cmd: $NMCLI --terse -f DEVICE,TYPE,DBUS-PATH dev lang: C returncode: 0 @@ -15763,7 +16027,7 @@ wlan1:wifi:/org/freedesktop/NetworkManager/Devices/5 <<< size: 438 -location: clients/tests/test-client.py:1077:test_004()/234 +location: clients/tests/test-client.py:1077:test_004()/242 cmd: $NMCLI --terse -f DEVICE,TYPE,DBUS-PATH dev lang: pl_PL.UTF-8 returncode: 0 @@ -15777,7 +16041,7 @@ wlan1:wifi:/org/freedesktop/NetworkManager/Devices/5 <<< size: 1086 -location: clients/tests/test-client.py:1080:test_004()/235 +location: clients/tests/test-client.py:1080:test_004()/243 cmd: $NMCLI --terse -f ALL device wifi list lang: C returncode: 0 @@ -15792,7 +16056,7 @@ AP[1]:wlan1-ap-4:776C616E312D61702D34:94\:2B\:E8\:F6\:D2\:86:Infra:1:2412 MHz:54 <<< size: 1144 -location: clients/tests/test-client.py:1080:test_004()/236 +location: clients/tests/test-client.py:1080:test_004()/244 cmd: $NMCLI --terse -f ALL device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -15807,7 +16071,7 @@ AP[1]:wlan1-ap-4:776C616E312D61702D34:94\:2B\:E8\:F6\:D2\:86:Infrastruktura:1:24 <<< size: 343 -location: clients/tests/test-client.py:1082:test_004()/237 +location: clients/tests/test-client.py:1082:test_004()/245 cmd: $NMCLI --terse -f COMMON device wifi list lang: C returncode: 0 @@ -15822,7 +16086,7 @@ stdout: 188 bytes <<< size: 389 -location: clients/tests/test-client.py:1082:test_004()/238 +location: clients/tests/test-client.py:1082:test_004()/246 cmd: $NMCLI --terse -f COMMON device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -15837,7 +16101,7 @@ stdout: 224 bytes <<< size: 1199 -location: clients/tests/test-client.py:1085:test_004()/239 +location: clients/tests/test-client.py:1085:test_004()/247 cmd: $NMCLI --terse -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: C returncode: 0 @@ -15852,7 +16116,7 @@ AP[1]:wlan1-ap-4:776C616E312D61702D34:94\:2B\:E8\:F6\:D2\:86:Infra:1:2412 MHz:54 <<< size: 1257 -location: clients/tests/test-client.py:1085:test_004()/240 +location: clients/tests/test-client.py:1085:test_004()/248 cmd: $NMCLI --terse -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -15867,7 +16131,7 @@ AP[1]:wlan1-ap-4:776C616E312D61702D34:94\:2B\:E8\:F6\:D2\:86:Infrastruktura:1:24 <<< size: 433 -location: clients/tests/test-client.py:1087:test_004()/241 +location: clients/tests/test-client.py:1087:test_004()/249 cmd: $NMCLI --terse -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -15879,7 +16143,7 @@ AP[1]:wlan0-ap-2:776C616E302D61702D32:C0\:E2\:BE\:E8\:EF\:B6:Infra:1:2412 MHz:54 <<< size: 455 -location: clients/tests/test-client.py:1087:test_004()/242 +location: clients/tests/test-client.py:1087:test_004()/250 cmd: $NMCLI --terse -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -15891,7 +16155,7 @@ AP[1]:wlan0-ap-2:776C616E302D61702D32:C0\:E2\:BE\:E8\:EF\:B6:Infrastruktura:1:24 <<< size: 229 -location: clients/tests/test-client.py:1089:test_004()/243 +location: clients/tests/test-client.py:1089:test_004()/251 cmd: $NMCLI --terse -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -15903,7 +16167,7 @@ stdout: 51 bytes <<< size: 248 -location: clients/tests/test-client.py:1089:test_004()/244 +location: clients/tests/test-client.py:1089:test_004()/252 cmd: $NMCLI --terse -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -15915,7 +16179,7 @@ stdout: 60 bytes <<< size: 546 -location: clients/tests/test-client.py:1092:test_004()/245 +location: clients/tests/test-client.py:1092:test_004()/253 cmd: $NMCLI --terse -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -15927,7 +16191,7 @@ AP[1]:wlan0-ap-2:776C616E302D61702D32:C0\:E2\:BE\:E8\:EF\:B6:Infra:1:2412 MHz:54 <<< size: 568 -location: clients/tests/test-client.py:1092:test_004()/246 +location: clients/tests/test-client.py:1092:test_004()/254 cmd: $NMCLI --terse -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -15939,7 +16203,7 @@ AP[1]:wlan0-ap-2:776C616E302D61702D32:C0\:E2\:BE\:E8\:EF\:B6:Infrastruktura:1:24 <<< size: 2696 -location: clients/tests/test-client.py:1094:test_004()/247 +location: clients/tests/test-client.py:1094:test_004()/255 cmd: $NMCLI --terse -f ALL device show wlan0 lang: C returncode: 0 @@ -16039,7 +16303,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 2733 -location: clients/tests/test-client.py:1094:test_004()/248 +location: clients/tests/test-client.py:1094:test_004()/256 cmd: $NMCLI --terse -f ALL device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -16139,7 +16403,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 895 -location: clients/tests/test-client.py:1096:test_004()/249 +location: clients/tests/test-client.py:1096:test_004()/257 cmd: $NMCLI --terse -f COMMON device show wlan0 lang: C returncode: 0 @@ -16172,7 +16436,7 @@ IP6.DOMAIN[6]:sear6.foo4.bar <<< size: 905 -location: clients/tests/test-client.py:1096:test_004()/250 +location: clients/tests/test-client.py:1096:test_004()/258 cmd: $NMCLI --terse -f COMMON device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -16205,7 +16469,7 @@ IP6.DOMAIN[6]:sear6.foo4.bar <<< size: 2834 -location: clients/tests/test-client.py:1098:test_004()/251 +location: clients/tests/test-client.py:1098:test_004()/259 cmd: $NMCLI --terse -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: C returncode: 0 @@ -16305,7 +16569,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 2871 -location: clients/tests/test-client.py:1098:test_004()/252 +location: clients/tests/test-client.py:1098:test_004()/260 cmd: $NMCLI --terse -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -16403,9 +16667,69 @@ DHCP6.OPTION[5]:dhcp-6-opt-5 = val-5 CONNECTIONS.AVAILABLE-CONNECTION-PATHS:/org/freedesktop/NetworkManager/Settings/Connection/{2} CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con-xx1 +<<< +size: 1136 +location: clients/tests/test-client.py:1101:test_004()/261 +cmd: $NMCLI --terse dev lldp list ifname eth0 +lang: C +returncode: 0 +stdout: 982 bytes +>>> +NEIGHBOR[0].DEVICE:eth0 +NEIGHBOR[0].CHASSIS-ID:00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID:Uplink port +NEIGHBOR[0].PORT-DESCRIPTION:GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME:test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION:Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES:20 (mac-bridge,router) +NEIGHBOR[1].DEVICE:eth0 +NEIGHBOR[1].CHASSIS-ID:chassis1 +NEIGHBOR[1].PORT-ID:44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION:GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME:test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION:Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES:2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +NEIGHBOR[2].DEVICE:eth0 +NEIGHBOR[2].CHASSIS-ID:00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID:port1 +NEIGHBOR[2].PORT-DESCRIPTION:GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME:test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION:Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES:40 (wlan-access-point,telephone) + +<<< +size: 1146 +location: clients/tests/test-client.py:1101:test_004()/262 +cmd: $NMCLI --terse dev lldp list ifname eth0 +lang: pl_PL.UTF-8 +returncode: 0 +stdout: 982 bytes +>>> +NEIGHBOR[0].DEVICE:eth0 +NEIGHBOR[0].CHASSIS-ID:00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID:Uplink port +NEIGHBOR[0].PORT-DESCRIPTION:GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME:test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION:Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES:20 (mac-bridge,router) +NEIGHBOR[1].DEVICE:eth0 +NEIGHBOR[1].CHASSIS-ID:chassis1 +NEIGHBOR[1].PORT-ID:44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION:GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME:test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION:Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES:2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +NEIGHBOR[2].DEVICE:eth0 +NEIGHBOR[2].CHASSIS-ID:00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID:port1 +NEIGHBOR[2].PORT-DESCRIPTION:GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME:test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION:Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES:40 (wlan-access-point,telephone) + <<< size: 2335 -location: clients/tests/test-client.py:1036:test_004()/253 +location: clients/tests/test-client.py:1036:test_004()/263 cmd: $NMCLI --terse --color yes con s con-vpn-1 lang: C returncode: 0 @@ -16507,7 +16831,7 @@ VPN.CFG[3]:key3 = val3 <<< size: 2345 -location: clients/tests/test-client.py:1036:test_004()/254 +location: clients/tests/test-client.py:1036:test_004()/264 cmd: $NMCLI --terse --color yes con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -16609,7 +16933,7 @@ VPN.CFG[3]:key3 = val3 <<< size: 2335 -location: clients/tests/test-client.py:1038:test_004()/255 +location: clients/tests/test-client.py:1038:test_004()/265 cmd: $NMCLI --terse --color yes con s con-vpn-1 lang: C returncode: 0 @@ -16711,7 +17035,7 @@ VPN.CFG[3]:key3 = val3 <<< size: 2345 -location: clients/tests/test-client.py:1038:test_004()/256 +location: clients/tests/test-client.py:1038:test_004()/266 cmd: $NMCLI --terse --color yes con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -16813,7 +17137,7 @@ VPN.CFG[3]:key3 = val3 <<< size: 1783 -location: clients/tests/test-client.py:1041:test_004()/257 +location: clients/tests/test-client.py:1041:test_004()/267 cmd: $NMCLI --terse --color yes -f ALL con s con-vpn-1 lang: C returncode: 0 @@ -16895,7 +17219,7 @@ proxy.pac-script: <<< size: 1793 -location: clients/tests/test-client.py:1041:test_004()/258 +location: clients/tests/test-client.py:1041:test_004()/268 cmd: $NMCLI --terse --color yes -f ALL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -16977,7 +17301,7 @@ proxy.pac-script: <<< size: 334 -location: clients/tests/test-client.py:1047:test_004()/259 +location: clients/tests/test-client.py:1047:test_004()/269 cmd: $NMCLI --terse --color yes -f VPN con s con-vpn-1 lang: C returncode: 0 @@ -16992,7 +17316,7 @@ vpn.timeout:0 <<< size: 344 -location: clients/tests/test-client.py:1047:test_004()/260 +location: clients/tests/test-client.py:1047:test_004()/270 cmd: $NMCLI --terse --color yes -f VPN con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -17007,7 +17331,7 @@ vpn.timeout:0 <<< size: 537 -location: clients/tests/test-client.py:1050:test_004()/261 +location: clients/tests/test-client.py:1050:test_004()/271 cmd: $NMCLI --terse --color yes -f GENERAL con s con-vpn-1 lang: C returncode: 0 @@ -17028,7 +17352,7 @@ GENERAL.MASTER-PATH: <<< size: 547 -location: clients/tests/test-client.py:1050:test_004()/262 +location: clients/tests/test-client.py:1050:test_004()/272 cmd: $NMCLI --terse --color yes -f GENERAL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -17049,7 +17373,7 @@ GENERAL.MASTER-PATH: <<< size: 441 -location: clients/tests/test-client.py:1053:test_004()/263 +location: clients/tests/test-client.py:1053:test_004()/273 cmd: $NMCLI --terse --color yes dev s lang: C returncode: 0 @@ -17063,7 +17387,7 @@ stdout: 295 bytes <<< size: 451 -location: clients/tests/test-client.py:1053:test_004()/264 +location: clients/tests/test-client.py:1053:test_004()/274 cmd: $NMCLI --terse --color yes dev s lang: pl_PL.UTF-8 returncode: 0 @@ -17077,7 +17401,7 @@ stdout: 295 bytes <<< size: 1039 -location: clients/tests/test-client.py:1056:test_004()/265 +location: clients/tests/test-client.py:1056:test_004()/275 cmd: $NMCLI --terse --color yes -f all dev status lang: C returncode: 0 @@ -17091,7 +17415,7 @@ stdout: 881 bytes <<< size: 1049 -location: clients/tests/test-client.py:1056:test_004()/266 +location: clients/tests/test-client.py:1056:test_004()/276 cmd: $NMCLI --terse --color yes -f all dev status lang: pl_PL.UTF-8 returncode: 0 @@ -17105,7 +17429,7 @@ stdout: 881 bytes <<< size: 4552 -location: clients/tests/test-client.py:1059:test_004()/267 +location: clients/tests/test-client.py:1059:test_004()/277 cmd: $NMCLI --terse --color yes dev show lang: C returncode: 0 @@ -17251,7 +17575,7 @@ IP6.DOMAIN[1]:sear6.fo.x.y <<< size: 4562 -location: clients/tests/test-client.py:1059:test_004()/268 +location: clients/tests/test-client.py:1059:test_004()/278 cmd: $NMCLI --terse --color yes dev show lang: pl_PL.UTF-8 returncode: 0 @@ -17397,7 +17721,7 @@ IP6.DOMAIN[1]:sear6.fo.x.y <<< size: 12227 -location: clients/tests/test-client.py:1062:test_004()/269 +location: clients/tests/test-client.py:1062:test_004()/279 cmd: $NMCLI --terse --color yes -f all dev show lang: C returncode: 0 @@ -17786,7 +18110,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 12273 -location: clients/tests/test-client.py:1062:test_004()/270 +location: clients/tests/test-client.py:1062:test_004()/280 cmd: $NMCLI --terse --color yes -f all dev show lang: pl_PL.UTF-8 returncode: 0 @@ -18175,7 +18499,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 894 -location: clients/tests/test-client.py:1065:test_004()/271 +location: clients/tests/test-client.py:1065:test_004()/281 cmd: $NMCLI --terse --color yes dev show wlan0 lang: C returncode: 0 @@ -18208,7 +18532,7 @@ IP6.DOMAIN[6]:sear6.foo4.bar <<< size: 904 -location: clients/tests/test-client.py:1065:test_004()/272 +location: clients/tests/test-client.py:1065:test_004()/282 cmd: $NMCLI --terse --color yes dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -18241,7 +18565,7 @@ IP6.DOMAIN[6]:sear6.foo4.bar <<< size: 2921 -location: clients/tests/test-client.py:1068:test_004()/273 +location: clients/tests/test-client.py:1068:test_004()/283 cmd: $NMCLI --terse --color yes -f all dev show wlan0 lang: C returncode: 0 @@ -18341,7 +18665,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 2958 -location: clients/tests/test-client.py:1068:test_004()/274 +location: clients/tests/test-client.py:1068:test_004()/284 cmd: $NMCLI --terse --color yes -f all dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -18441,7 +18765,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 1203 -location: clients/tests/test-client.py:1071:test_004()/275 +location: clients/tests/test-client.py:1071:test_004()/285 cmd: $NMCLI --terse --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -18486,7 +18810,7 @@ WIFI-PROPERTIES.5GHZ:unknown <<< size: 1213 -location: clients/tests/test-client.py:1071:test_004()/276 +location: clients/tests/test-client.py:1071:test_004()/286 cmd: $NMCLI --terse --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -18531,7 +18855,7 @@ WIFI-PROPERTIES.5GHZ:unknown <<< size: 1203 -location: clients/tests/test-client.py:1074:test_004()/277 +location: clients/tests/test-client.py:1074:test_004()/287 cmd: $NMCLI --terse --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -18576,7 +18900,7 @@ WIFI-PROPERTIES.5GHZ:unknown <<< size: 1213 -location: clients/tests/test-client.py:1074:test_004()/278 +location: clients/tests/test-client.py:1074:test_004()/288 cmd: $NMCLI --terse --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -18621,7 +18945,7 @@ WIFI-PROPERTIES.5GHZ:unknown <<< size: 560 -location: clients/tests/test-client.py:1077:test_004()/279 +location: clients/tests/test-client.py:1077:test_004()/289 cmd: $NMCLI --terse --color yes -f DEVICE,TYPE,DBUS-PATH dev lang: C returncode: 0 @@ -18635,7 +18959,7 @@ stdout: 391 bytes <<< size: 570 -location: clients/tests/test-client.py:1077:test_004()/280 +location: clients/tests/test-client.py:1077:test_004()/290 cmd: $NMCLI --terse --color yes -f DEVICE,TYPE,DBUS-PATH dev lang: pl_PL.UTF-8 returncode: 0 @@ -18649,7 +18973,7 @@ stdout: 391 bytes <<< size: 1711 -location: clients/tests/test-client.py:1080:test_004()/281 +location: clients/tests/test-client.py:1080:test_004()/291 cmd: $NMCLI --terse --color yes -f ALL device wifi list lang: C returncode: 0 @@ -18664,7 +18988,7 @@ stdout: 1546 bytes <<< size: 1769 -location: clients/tests/test-client.py:1080:test_004()/282 +location: clients/tests/test-client.py:1080:test_004()/292 cmd: $NMCLI --terse --color yes -f ALL device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -18679,7 +19003,7 @@ stdout: 1594 bytes <<< size: 643 -location: clients/tests/test-client.py:1082:test_004()/283 +location: clients/tests/test-client.py:1082:test_004()/293 cmd: $NMCLI --terse --color yes -f COMMON device wifi list lang: C returncode: 0 @@ -18694,7 +19018,7 @@ stdout: 476 bytes <<< size: 689 -location: clients/tests/test-client.py:1082:test_004()/284 +location: clients/tests/test-client.py:1082:test_004()/294 cmd: $NMCLI --terse --color yes -f COMMON device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -18709,7 +19033,7 @@ stdout: 512 bytes <<< size: 1824 -location: clients/tests/test-client.py:1085:test_004()/285 +location: clients/tests/test-client.py:1085:test_004()/295 cmd: $NMCLI --terse --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: C returncode: 0 @@ -18724,7 +19048,7 @@ stdout: 1546 bytes <<< size: 1882 -location: clients/tests/test-client.py:1085:test_004()/286 +location: clients/tests/test-client.py:1085:test_004()/296 cmd: $NMCLI --terse --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -18739,7 +19063,7 @@ stdout: 1594 bytes <<< size: 598 -location: clients/tests/test-client.py:1087:test_004()/287 +location: clients/tests/test-client.py:1087:test_004()/297 cmd: $NMCLI --terse --color yes -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -18751,7 +19075,7 @@ stdout: 410 bytes <<< size: 620 -location: clients/tests/test-client.py:1087:test_004()/288 +location: clients/tests/test-client.py:1087:test_004()/298 cmd: $NMCLI --terse --color yes -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -18763,7 +19087,7 @@ stdout: 422 bytes <<< size: 314 -location: clients/tests/test-client.py:1089:test_004()/289 +location: clients/tests/test-client.py:1089:test_004()/299 cmd: $NMCLI --terse --color yes -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -18775,7 +19099,7 @@ stdout: 123 bytes <<< size: 333 -location: clients/tests/test-client.py:1089:test_004()/290 +location: clients/tests/test-client.py:1089:test_004()/300 cmd: $NMCLI --terse --color yes -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -18787,7 +19111,7 @@ stdout: 132 bytes <<< size: 711 -location: clients/tests/test-client.py:1092:test_004()/291 +location: clients/tests/test-client.py:1092:test_004()/301 cmd: $NMCLI --terse --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -18799,7 +19123,7 @@ stdout: 410 bytes <<< size: 733 -location: clients/tests/test-client.py:1092:test_004()/292 +location: clients/tests/test-client.py:1092:test_004()/302 cmd: $NMCLI --terse --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -18811,7 +19135,7 @@ stdout: 422 bytes <<< size: 2924 -location: clients/tests/test-client.py:1094:test_004()/293 +location: clients/tests/test-client.py:1094:test_004()/303 cmd: $NMCLI --terse --color yes -f ALL device show wlan0 lang: C returncode: 0 @@ -18911,7 +19235,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 2961 -location: clients/tests/test-client.py:1094:test_004()/294 +location: clients/tests/test-client.py:1094:test_004()/304 cmd: $NMCLI --terse --color yes -f ALL device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -19011,7 +19335,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 907 -location: clients/tests/test-client.py:1096:test_004()/295 +location: clients/tests/test-client.py:1096:test_004()/305 cmd: $NMCLI --terse --color yes -f COMMON device show wlan0 lang: C returncode: 0 @@ -19044,7 +19368,7 @@ IP6.DOMAIN[6]:sear6.foo4.bar <<< size: 917 -location: clients/tests/test-client.py:1096:test_004()/296 +location: clients/tests/test-client.py:1096:test_004()/306 cmd: $NMCLI --terse --color yes -f COMMON device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -19077,7 +19401,7 @@ IP6.DOMAIN[6]:sear6.foo4.bar <<< size: 3062 -location: clients/tests/test-client.py:1098:test_004()/297 +location: clients/tests/test-client.py:1098:test_004()/307 cmd: $NMCLI --terse --color yes -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: C returncode: 0 @@ -19177,7 +19501,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 3099 -location: clients/tests/test-client.py:1098:test_004()/298 +location: clients/tests/test-client.py:1098:test_004()/308 cmd: $NMCLI --terse --color yes -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -19275,9 +19599,69 @@ DHCP6.OPTION[5]:dhcp-6-opt-5 = val-5 CONNECTIONS.AVAILABLE-CONNECTION-PATHS:/org/freedesktop/NetworkManager/Settings/Connection/{2} CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con-xx1 +<<< +size: 1148 +location: clients/tests/test-client.py:1101:test_004()/309 +cmd: $NMCLI --terse --color yes dev lldp list ifname eth0 +lang: C +returncode: 0 +stdout: 982 bytes +>>> +NEIGHBOR[0].DEVICE:eth0 +NEIGHBOR[0].CHASSIS-ID:00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID:Uplink port +NEIGHBOR[0].PORT-DESCRIPTION:GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME:test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION:Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES:20 (mac-bridge,router) +NEIGHBOR[1].DEVICE:eth0 +NEIGHBOR[1].CHASSIS-ID:chassis1 +NEIGHBOR[1].PORT-ID:44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION:GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME:test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION:Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES:2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +NEIGHBOR[2].DEVICE:eth0 +NEIGHBOR[2].CHASSIS-ID:00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID:port1 +NEIGHBOR[2].PORT-DESCRIPTION:GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME:test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION:Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES:40 (wlan-access-point,telephone) + +<<< +size: 1158 +location: clients/tests/test-client.py:1101:test_004()/310 +cmd: $NMCLI --terse --color yes dev lldp list ifname eth0 +lang: pl_PL.UTF-8 +returncode: 0 +stdout: 982 bytes +>>> +NEIGHBOR[0].DEVICE:eth0 +NEIGHBOR[0].CHASSIS-ID:00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID:Uplink port +NEIGHBOR[0].PORT-DESCRIPTION:GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME:test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION:Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES:20 (mac-bridge,router) +NEIGHBOR[1].DEVICE:eth0 +NEIGHBOR[1].CHASSIS-ID:chassis1 +NEIGHBOR[1].PORT-ID:44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION:GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME:test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION:Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES:2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +NEIGHBOR[2].DEVICE:eth0 +NEIGHBOR[2].CHASSIS-ID:00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID:port1 +NEIGHBOR[2].PORT-DESCRIPTION:GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME:test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION:Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES:40 (wlan-access-point,telephone) + <<< size: 2978 -location: clients/tests/test-client.py:1036:test_004()/299 +location: clients/tests/test-client.py:1036:test_004()/311 cmd: $NMCLI --mode tabular con s con-vpn-1 lang: C returncode: 0 @@ -19306,7 +19690,7 @@ VPN openvpn -- -- *** VPN connection con-vpn-1 *** 5 - VPN conn <<< size: 3001 -location: clients/tests/test-client.py:1036:test_004()/300 +location: clients/tests/test-client.py:1036:test_004()/312 cmd: $NMCLI --mode tabular con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -19335,7 +19719,7 @@ VPN openvpn -- -- *** VPN connection con-vpn-1 *** 5 — Połą <<< size: 2978 -location: clients/tests/test-client.py:1038:test_004()/301 +location: clients/tests/test-client.py:1038:test_004()/313 cmd: $NMCLI --mode tabular con s con-vpn-1 lang: C returncode: 0 @@ -19364,7 +19748,7 @@ VPN openvpn -- -- *** VPN connection con-vpn-1 *** 5 - VPN conn <<< size: 3001 -location: clients/tests/test-client.py:1038:test_004()/302 +location: clients/tests/test-client.py:1038:test_004()/314 cmd: $NMCLI --mode tabular con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -19393,7 +19777,7 @@ VPN openvpn -- -- *** VPN connection con-vpn-1 *** 5 — Połą <<< size: 2246 -location: clients/tests/test-client.py:1041:test_004()/303 +location: clients/tests/test-client.py:1041:test_004()/315 cmd: $NMCLI --mode tabular -f ALL con s con-vpn-1 lang: C returncode: 0 @@ -19417,7 +19801,7 @@ proxy none no -- -- <<< size: 2258 -location: clients/tests/test-client.py:1041:test_004()/304 +location: clients/tests/test-client.py:1041:test_004()/316 cmd: $NMCLI --mode tabular -f ALL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -19441,7 +19825,7 @@ proxy none nie -- -- <<< size: 412 -location: clients/tests/test-client.py:1047:test_004()/305 +location: clients/tests/test-client.py:1047:test_004()/317 cmd: $NMCLI --mode tabular -f VPN con s con-vpn-1 lang: C returncode: 0 @@ -19452,7 +19836,7 @@ vpn org.freedesktop.NetworkManager.openvpn -- key1 = val1, key2 = val <<< size: 422 -location: clients/tests/test-client.py:1047:test_004()/306 +location: clients/tests/test-client.py:1047:test_004()/318 cmd: $NMCLI --mode tabular -f VPN con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -19463,7 +19847,7 @@ vpn org.freedesktop.NetworkManager.openvpn -- key1 = val1, key2 = val <<< size: 644 -location: clients/tests/test-client.py:1050:test_004()/307 +location: clients/tests/test-client.py:1050:test_004()/319 cmd: $NMCLI --mode tabular -f GENERAL con s con-vpn-1 lang: C returncode: 0 @@ -19474,7 +19858,7 @@ GENERAL con-vpn-1 UUID-con-vpn-1-REPLACED-REPLACED-REP wlan0 activated no <<< size: 656 -location: clients/tests/test-client.py:1050:test_004()/308 +location: clients/tests/test-client.py:1050:test_004()/320 cmd: $NMCLI --mode tabular -f GENERAL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -19485,7 +19869,7 @@ GENERAL con-vpn-1 UUID-con-vpn-1-REPLACED-REPLACED-REP wlan0 aktywowano n <<< size: 399 -location: clients/tests/test-client.py:1053:test_004()/309 +location: clients/tests/test-client.py:1053:test_004()/321 cmd: $NMCLI --mode tabular dev s lang: C returncode: 0 @@ -19500,7 +19884,7 @@ wlan1 wifi unavailable -- <<< size: 414 -location: clients/tests/test-client.py:1053:test_004()/310 +location: clients/tests/test-client.py:1053:test_004()/322 cmd: $NMCLI --mode tabular dev s lang: pl_PL.UTF-8 returncode: 0 @@ -19515,7 +19899,7 @@ wlan1 wifi niedostępne -- <<< size: 1426 -location: clients/tests/test-client.py:1056:test_004()/311 +location: clients/tests/test-client.py:1056:test_004()/323 cmd: $NMCLI --mode tabular -f all dev status lang: C returncode: 0 @@ -19530,7 +19914,7 @@ wlan1 wifi unavailable unknown unknown /org/freedesk <<< size: 1441 -location: clients/tests/test-client.py:1056:test_004()/312 +location: clients/tests/test-client.py:1056:test_004()/324 cmd: $NMCLI --mode tabular -f all dev status lang: pl_PL.UTF-8 returncode: 0 @@ -19545,7 +19929,7 @@ wlan1 wifi niedostępne nieznane nieznane /org/freedes <<< size: 6361 -location: clients/tests/test-client.py:1059:test_004()/313 +location: clients/tests/test-client.py:1059:test_004()/325 cmd: $NMCLI --mode tabular dev show lang: C returncode: 0 @@ -19694,7 +20078,7 @@ IP6 2001:a::88ca:3654:96b:ab44/89 -- dst = 2001:a::cc8b:7c09:4673:bbb0 <<< size: 6388 -location: clients/tests/test-client.py:1059:test_004()/314 +location: clients/tests/test-client.py:1059:test_004()/326 cmd: $NMCLI --mode tabular dev show lang: pl_PL.UTF-8 returncode: 0 @@ -19843,7 +20227,7 @@ IP6 2001:a::88ca:3654:96b:ab44/89 -- dst = 2001:a::cc8b:7c09:4673:bbb0 <<< size: 14861 -location: clients/tests/test-client.py:1062:test_004()/315 +location: clients/tests/test-client.py:1062:test_004()/327 cmd: $NMCLI --mode tabular -f all dev show lang: C returncode: 0 @@ -19981,7 +20365,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 15020 -location: clients/tests/test-client.py:1062:test_004()/316 +location: clients/tests/test-client.py:1062:test_004()/328 cmd: $NMCLI --mode tabular -f all dev show lang: pl_PL.UTF-8 returncode: 0 @@ -20119,7 +20503,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 1130 -location: clients/tests/test-client.py:1065:test_004()/317 +location: clients/tests/test-client.py:1065:test_004()/329 cmd: $NMCLI --mode tabular dev show wlan0 lang: C returncode: 0 @@ -20154,7 +20538,7 @@ IP6 -- -- dst = 2001:a::dd5b:aa7b:b4a2:e42/102, nh = ::, mt = 250 <<< size: 1141 -location: clients/tests/test-client.py:1065:test_004()/318 +location: clients/tests/test-client.py:1065:test_004()/330 cmd: $NMCLI --mode tabular dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -20189,7 +20573,7 @@ IP6 -- -- dst = 2001:a::dd5b:aa7b:b4a2:e42/102, nh = ::, mt = 250 <<< size: 3012 -location: clients/tests/test-client.py:1068:test_004()/319 +location: clients/tests/test-client.py:1068:test_004()/331 cmd: $NMCLI --mode tabular -f all dev show wlan0 lang: C returncode: 0 @@ -20226,7 +20610,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 3075 -location: clients/tests/test-client.py:1068:test_004()/320 +location: clients/tests/test-client.py:1068:test_004()/332 cmd: $NMCLI --mode tabular -f all dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -20263,7 +20647,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 1251 -location: clients/tests/test-client.py:1071:test_004()/321 +location: clients/tests/test-client.py:1071:test_004()/333 cmd: $NMCLI --mode tabular -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -20280,7 +20664,7 @@ WIFI-PROPERTIES yes yes yes yes yes yes yes unknown unknown <<< size: 1278 -location: clients/tests/test-client.py:1071:test_004()/322 +location: clients/tests/test-client.py:1071:test_004()/334 cmd: $NMCLI --mode tabular -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -20297,7 +20681,7 @@ WIFI-PROPERTIES tak tak tak tak tak tak tak nieznane nieznane <<< size: 1251 -location: clients/tests/test-client.py:1074:test_004()/323 +location: clients/tests/test-client.py:1074:test_004()/335 cmd: $NMCLI --mode tabular -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -20314,7 +20698,7 @@ WIFI-PROPERTIES yes yes yes yes yes yes yes unknown unknown <<< size: 1278 -location: clients/tests/test-client.py:1074:test_004()/324 +location: clients/tests/test-client.py:1074:test_004()/336 cmd: $NMCLI --mode tabular -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -20331,7 +20715,7 @@ WIFI-PROPERTIES tak tak tak tak tak tak tak nieznane nieznane <<< size: 530 -location: clients/tests/test-client.py:1077:test_004()/325 +location: clients/tests/test-client.py:1077:test_004()/337 cmd: $NMCLI --mode tabular -f DEVICE,TYPE,DBUS-PATH dev lang: C returncode: 0 @@ -20346,7 +20730,7 @@ wlan1 wifi /org/freedesktop/NetworkManager/Devices/5 <<< size: 540 -location: clients/tests/test-client.py:1077:test_004()/326 +location: clients/tests/test-client.py:1077:test_004()/338 cmd: $NMCLI --mode tabular -f DEVICE,TYPE,DBUS-PATH dev lang: pl_PL.UTF-8 returncode: 0 @@ -20361,7 +20745,7 @@ wlan1 wifi /org/freedesktop/NetworkManager/Devices/5 <<< size: 2000 -location: clients/tests/test-client.py:1080:test_004()/327 +location: clients/tests/test-client.py:1080:test_004()/339 cmd: $NMCLI --mode tabular -f ALL device wifi list lang: C returncode: 0 @@ -20379,7 +20763,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 2068 -location: clients/tests/test-client.py:1080:test_004()/328 +location: clients/tests/test-client.py:1080:test_004()/340 cmd: $NMCLI --mode tabular -f ALL device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -20397,7 +20781,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 634 -location: clients/tests/test-client.py:1082:test_004()/329 +location: clients/tests/test-client.py:1082:test_004()/341 cmd: $NMCLI --mode tabular -f COMMON device wifi list lang: C returncode: 0 @@ -20415,7 +20799,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 694 -location: clients/tests/test-client.py:1082:test_004()/330 +location: clients/tests/test-client.py:1082:test_004()/342 cmd: $NMCLI --mode tabular -f COMMON device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -20433,7 +20817,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 2113 -location: clients/tests/test-client.py:1085:test_004()/331 +location: clients/tests/test-client.py:1085:test_004()/343 cmd: $NMCLI --mode tabular -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: C returncode: 0 @@ -20451,7 +20835,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 2181 -location: clients/tests/test-client.py:1085:test_004()/332 +location: clients/tests/test-client.py:1085:test_004()/344 cmd: $NMCLI --mode tabular -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -20469,7 +20853,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 753 -location: clients/tests/test-client.py:1087:test_004()/333 +location: clients/tests/test-client.py:1087:test_004()/345 cmd: $NMCLI --mode tabular -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -20482,7 +20866,7 @@ AP[1] wlan0-ap-2 776C616E302D61702D32 C0:E2:BE:E8:EF:B6 Infra 1 2412 MH <<< size: 781 -location: clients/tests/test-client.py:1087:test_004()/334 +location: clients/tests/test-client.py:1087:test_004()/346 cmd: $NMCLI --mode tabular -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -20495,7 +20879,7 @@ AP[1] wlan0-ap-2 776C616E302D61702D32 C0:E2:BE:E8:EF:B6 Infrastruktura 1 <<< size: 326 -location: clients/tests/test-client.py:1089:test_004()/335 +location: clients/tests/test-client.py:1089:test_004()/347 cmd: $NMCLI --mode tabular -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -20508,7 +20892,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 352 -location: clients/tests/test-client.py:1089:test_004()/336 +location: clients/tests/test-client.py:1089:test_004()/348 cmd: $NMCLI --mode tabular -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -20521,7 +20905,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 866 -location: clients/tests/test-client.py:1092:test_004()/337 +location: clients/tests/test-client.py:1092:test_004()/349 cmd: $NMCLI --mode tabular -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -20534,7 +20918,7 @@ AP[1] wlan0-ap-2 776C616E302D61702D32 C0:E2:BE:E8:EF:B6 Infra 1 2412 MH <<< size: 894 -location: clients/tests/test-client.py:1092:test_004()/338 +location: clients/tests/test-client.py:1092:test_004()/350 cmd: $NMCLI --mode tabular -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -20547,7 +20931,7 @@ AP[1] wlan0-ap-2 776C616E302D61702D32 C0:E2:BE:E8:EF:B6 Infrastruktura 1 <<< size: 3015 -location: clients/tests/test-client.py:1094:test_004()/339 +location: clients/tests/test-client.py:1094:test_004()/351 cmd: $NMCLI --mode tabular -f ALL device show wlan0 lang: C returncode: 0 @@ -20584,7 +20968,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 3078 -location: clients/tests/test-client.py:1094:test_004()/340 +location: clients/tests/test-client.py:1094:test_004()/352 cmd: $NMCLI --mode tabular -f ALL device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -20621,7 +21005,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 1143 -location: clients/tests/test-client.py:1096:test_004()/341 +location: clients/tests/test-client.py:1096:test_004()/353 cmd: $NMCLI --mode tabular -f COMMON device show wlan0 lang: C returncode: 0 @@ -20656,7 +21040,7 @@ IP6 -- -- dst = 2001:a::dd5b:aa7b:b4a2:e42/102, nh = ::, mt = 250 <<< size: 1154 -location: clients/tests/test-client.py:1096:test_004()/342 +location: clients/tests/test-client.py:1096:test_004()/354 cmd: $NMCLI --mode tabular -f COMMON device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -20691,7 +21075,7 @@ IP6 -- -- dst = 2001:a::dd5b:aa7b:b4a2:e42/102, nh = ::, mt = 250 <<< size: 3153 -location: clients/tests/test-client.py:1098:test_004()/343 +location: clients/tests/test-client.py:1098:test_004()/355 cmd: $NMCLI --mode tabular -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: C returncode: 0 @@ -20728,7 +21112,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 3216 -location: clients/tests/test-client.py:1098:test_004()/344 +location: clients/tests/test-client.py:1098:test_004()/356 cmd: $NMCLI --mode tabular -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -20763,9 +21147,35 @@ DHCP6 dhcp-6-opt-1 = val-1 | dhcp-6-opt-2 = val-2 | dhcp-6-opt-3 = val-3 | dhcp NAME AVAILABLE-CONNECTION-PATHS AVAILABLE-CONNECTIONS CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-xx1-REPLACED-REPLACED-REPLA | con-xx1 +<<< +size: 1145 +location: clients/tests/test-client.py:1101:test_004()/357 +cmd: $NMCLI --mode tabular dev lldp list ifname eth0 +lang: C +returncode: 0 +stdout: 984 bytes +>>> +DEVICE CHASSIS-ID PORT-ID PORT-DESCRIPTION SYSTEM-NAME SYSTEM-DESCRIPTION SYSTEM-CAPABILITIES +eth0 00:11:22:33:44:00 Uplink port GigabitEthernet #1 test1.example.com Test system #1 20 (mac-bridge,router) +eth0 chassis1 44:44:44:44:44:44 GigabitEthernet #2 test2.example.com Test system #2 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +eth0 00:11:22:33:44:22 port1 GigabitEthernet #3 test3.example.com Test system #3 40 (wlan-access-point,telephone) + +<<< +size: 1155 +location: clients/tests/test-client.py:1101:test_004()/358 +cmd: $NMCLI --mode tabular dev lldp list ifname eth0 +lang: pl_PL.UTF-8 +returncode: 0 +stdout: 984 bytes +>>> +DEVICE CHASSIS-ID PORT-ID PORT-DESCRIPTION SYSTEM-NAME SYSTEM-DESCRIPTION SYSTEM-CAPABILITIES +eth0 00:11:22:33:44:00 Uplink port GigabitEthernet #1 test1.example.com Test system #1 20 (mac-bridge,router) +eth0 chassis1 44:44:44:44:44:44 GigabitEthernet #2 test2.example.com Test system #2 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +eth0 00:11:22:33:44:22 port1 GigabitEthernet #3 test3.example.com Test system #3 40 (wlan-access-point,telephone) + <<< size: 2990 -location: clients/tests/test-client.py:1036:test_004()/345 +location: clients/tests/test-client.py:1036:test_004()/359 cmd: $NMCLI --mode tabular --color yes con s con-vpn-1 lang: C returncode: 0 @@ -20794,7 +21204,7 @@ VPN openvpn -- -- *** VPN connection con-vpn-1 *** 5 - VPN conn <<< size: 3013 -location: clients/tests/test-client.py:1036:test_004()/346 +location: clients/tests/test-client.py:1036:test_004()/360 cmd: $NMCLI --mode tabular --color yes con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -20823,7 +21233,7 @@ VPN openvpn -- -- *** VPN connection con-vpn-1 *** 5 — Połą <<< size: 2990 -location: clients/tests/test-client.py:1038:test_004()/347 +location: clients/tests/test-client.py:1038:test_004()/361 cmd: $NMCLI --mode tabular --color yes con s con-vpn-1 lang: C returncode: 0 @@ -20852,7 +21262,7 @@ VPN openvpn -- -- *** VPN connection con-vpn-1 *** 5 - VPN conn <<< size: 3013 -location: clients/tests/test-client.py:1038:test_004()/348 +location: clients/tests/test-client.py:1038:test_004()/362 cmd: $NMCLI --mode tabular --color yes con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -20881,7 +21291,7 @@ VPN openvpn -- -- *** VPN connection con-vpn-1 *** 5 — Połą <<< size: 2258 -location: clients/tests/test-client.py:1041:test_004()/349 +location: clients/tests/test-client.py:1041:test_004()/363 cmd: $NMCLI --mode tabular --color yes -f ALL con s con-vpn-1 lang: C returncode: 0 @@ -20905,7 +21315,7 @@ proxy none no -- -- <<< size: 2270 -location: clients/tests/test-client.py:1041:test_004()/350 +location: clients/tests/test-client.py:1041:test_004()/364 cmd: $NMCLI --mode tabular --color yes -f ALL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -20929,7 +21339,7 @@ proxy none nie -- -- <<< size: 424 -location: clients/tests/test-client.py:1047:test_004()/351 +location: clients/tests/test-client.py:1047:test_004()/365 cmd: $NMCLI --mode tabular --color yes -f VPN con s con-vpn-1 lang: C returncode: 0 @@ -20940,7 +21350,7 @@ vpn org.freedesktop.NetworkManager.openvpn -- key1 = val1, key2 = val <<< size: 434 -location: clients/tests/test-client.py:1047:test_004()/352 +location: clients/tests/test-client.py:1047:test_004()/366 cmd: $NMCLI --mode tabular --color yes -f VPN con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -20951,7 +21361,7 @@ vpn org.freedesktop.NetworkManager.openvpn -- key1 = val1, key2 = val <<< size: 656 -location: clients/tests/test-client.py:1050:test_004()/353 +location: clients/tests/test-client.py:1050:test_004()/367 cmd: $NMCLI --mode tabular --color yes -f GENERAL con s con-vpn-1 lang: C returncode: 0 @@ -20962,7 +21372,7 @@ GENERAL con-vpn-1 UUID-con-vpn-1-REPLACED-REPLACED-REP wlan0 activated no <<< size: 668 -location: clients/tests/test-client.py:1050:test_004()/354 +location: clients/tests/test-client.py:1050:test_004()/368 cmd: $NMCLI --mode tabular --color yes -f GENERAL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -20973,7 +21383,7 @@ GENERAL con-vpn-1 UUID-con-vpn-1-REPLACED-REPLACED-REP wlan0 aktywowano n <<< size: 571 -location: clients/tests/test-client.py:1053:test_004()/355 +location: clients/tests/test-client.py:1053:test_004()/369 cmd: $NMCLI --mode tabular --color yes dev s lang: C returncode: 0 @@ -20988,7 +21398,7 @@ DEVICE TYPE STATE CONNECTION <<< size: 586 -location: clients/tests/test-client.py:1053:test_004()/356 +location: clients/tests/test-client.py:1053:test_004()/370 cmd: $NMCLI --mode tabular --color yes dev s lang: pl_PL.UTF-8 returncode: 0 @@ -21003,7 +21413,7 @@ DEVICE TYPE STATE CONNECTION <<< size: 1798 -location: clients/tests/test-client.py:1056:test_004()/357 +location: clients/tests/test-client.py:1056:test_004()/371 cmd: $NMCLI --mode tabular --color yes -f all dev status lang: C returncode: 0 @@ -21018,7 +21428,7 @@ DEVICE TYPE STATE IP4-CONNECTIVITY IP6-CONNECTIVITY DBUS-PATH <<< size: 1813 -location: clients/tests/test-client.py:1056:test_004()/358 +location: clients/tests/test-client.py:1056:test_004()/372 cmd: $NMCLI --mode tabular --color yes -f all dev status lang: pl_PL.UTF-8 returncode: 0 @@ -21033,7 +21443,7 @@ DEVICE TYPE STATE IP4-CONNECTIVITY IP6-CONNECTIVITY DBUS-PATH <<< size: 6373 -location: clients/tests/test-client.py:1059:test_004()/359 +location: clients/tests/test-client.py:1059:test_004()/373 cmd: $NMCLI --mode tabular --color yes dev show lang: C returncode: 0 @@ -21182,7 +21592,7 @@ IP6 2001:a::88ca:3654:96b:ab44/89 -- dst = 2001:a::cc8b:7c09:4673:bbb0 <<< size: 6400 -location: clients/tests/test-client.py:1059:test_004()/360 +location: clients/tests/test-client.py:1059:test_004()/374 cmd: $NMCLI --mode tabular --color yes dev show lang: pl_PL.UTF-8 returncode: 0 @@ -21331,7 +21741,7 @@ IP6 2001:a::88ca:3654:96b:ab44/89 -- dst = 2001:a::cc8b:7c09:4673:bbb0 <<< size: 15197 -location: clients/tests/test-client.py:1062:test_004()/361 +location: clients/tests/test-client.py:1062:test_004()/375 cmd: $NMCLI --mode tabular --color yes -f all dev show lang: C returncode: 0 @@ -21469,7 +21879,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 15356 -location: clients/tests/test-client.py:1062:test_004()/362 +location: clients/tests/test-client.py:1062:test_004()/376 cmd: $NMCLI --mode tabular --color yes -f all dev show lang: pl_PL.UTF-8 returncode: 0 @@ -21607,7 +22017,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 1142 -location: clients/tests/test-client.py:1065:test_004()/363 +location: clients/tests/test-client.py:1065:test_004()/377 cmd: $NMCLI --mode tabular --color yes dev show wlan0 lang: C returncode: 0 @@ -21642,7 +22052,7 @@ IP6 -- -- dst = 2001:a::dd5b:aa7b:b4a2:e42/102, nh = ::, mt = 250 <<< size: 1153 -location: clients/tests/test-client.py:1065:test_004()/364 +location: clients/tests/test-client.py:1065:test_004()/378 cmd: $NMCLI --mode tabular --color yes dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -21677,7 +22087,7 @@ IP6 -- -- dst = 2001:a::dd5b:aa7b:b4a2:e42/102, nh = ::, mt = 250 <<< size: 3267 -location: clients/tests/test-client.py:1068:test_004()/365 +location: clients/tests/test-client.py:1068:test_004()/379 cmd: $NMCLI --mode tabular --color yes -f all dev show wlan0 lang: C returncode: 0 @@ -21714,7 +22124,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 3330 -location: clients/tests/test-client.py:1068:test_004()/366 +location: clients/tests/test-client.py:1068:test_004()/380 cmd: $NMCLI --mode tabular --color yes -f all dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -21751,7 +22161,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 1263 -location: clients/tests/test-client.py:1071:test_004()/367 +location: clients/tests/test-client.py:1071:test_004()/381 cmd: $NMCLI --mode tabular --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -21768,7 +22178,7 @@ WIFI-PROPERTIES yes yes yes yes yes yes yes unknown unknown <<< size: 1290 -location: clients/tests/test-client.py:1071:test_004()/368 +location: clients/tests/test-client.py:1071:test_004()/382 cmd: $NMCLI --mode tabular --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -21785,7 +22195,7 @@ WIFI-PROPERTIES tak tak tak tak tak tak tak nieznane nieznane <<< size: 1263 -location: clients/tests/test-client.py:1074:test_004()/369 +location: clients/tests/test-client.py:1074:test_004()/383 cmd: $NMCLI --mode tabular --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -21802,7 +22212,7 @@ WIFI-PROPERTIES yes yes yes yes yes yes yes unknown unknown <<< size: 1290 -location: clients/tests/test-client.py:1074:test_004()/370 +location: clients/tests/test-client.py:1074:test_004()/384 cmd: $NMCLI --mode tabular --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -21819,7 +22229,7 @@ WIFI-PROPERTIES tak tak tak tak tak tak tak nieznane nieznane <<< size: 662 -location: clients/tests/test-client.py:1077:test_004()/371 +location: clients/tests/test-client.py:1077:test_004()/385 cmd: $NMCLI --mode tabular --color yes -f DEVICE,TYPE,DBUS-PATH dev lang: C returncode: 0 @@ -21834,7 +22244,7 @@ DEVICE TYPE DBUS-PATH <<< size: 672 -location: clients/tests/test-client.py:1077:test_004()/372 +location: clients/tests/test-client.py:1077:test_004()/386 cmd: $NMCLI --mode tabular --color yes -f DEVICE,TYPE,DBUS-PATH dev lang: pl_PL.UTF-8 returncode: 0 @@ -21849,7 +22259,7 @@ DEVICE TYPE DBUS-PATH <<< size: 2624 -location: clients/tests/test-client.py:1080:test_004()/373 +location: clients/tests/test-client.py:1080:test_004()/387 cmd: $NMCLI --mode tabular --color yes -f ALL device wifi list lang: C returncode: 0 @@ -21867,7 +22277,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 2692 -location: clients/tests/test-client.py:1080:test_004()/374 +location: clients/tests/test-client.py:1080:test_004()/388 cmd: $NMCLI --mode tabular --color yes -f ALL device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -21885,7 +22295,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 934 -location: clients/tests/test-client.py:1082:test_004()/375 +location: clients/tests/test-client.py:1082:test_004()/389 cmd: $NMCLI --mode tabular --color yes -f COMMON device wifi list lang: C returncode: 0 @@ -21903,7 +22313,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 994 -location: clients/tests/test-client.py:1082:test_004()/376 +location: clients/tests/test-client.py:1082:test_004()/390 cmd: $NMCLI --mode tabular --color yes -f COMMON device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -21921,7 +22331,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 2737 -location: clients/tests/test-client.py:1085:test_004()/377 +location: clients/tests/test-client.py:1085:test_004()/391 cmd: $NMCLI --mode tabular --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: C returncode: 0 @@ -21939,7 +22349,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 2805 -location: clients/tests/test-client.py:1085:test_004()/378 +location: clients/tests/test-client.py:1085:test_004()/392 cmd: $NMCLI --mode tabular --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -21957,7 +22367,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 918 -location: clients/tests/test-client.py:1087:test_004()/379 +location: clients/tests/test-client.py:1087:test_004()/393 cmd: $NMCLI --mode tabular --color yes -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -21970,7 +22380,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ <<< size: 946 -location: clients/tests/test-client.py:1087:test_004()/380 +location: clients/tests/test-client.py:1087:test_004()/394 cmd: $NMCLI --mode tabular --color yes -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -21983,7 +22393,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN <<< size: 410 -location: clients/tests/test-client.py:1089:test_004()/381 +location: clients/tests/test-client.py:1089:test_004()/395 cmd: $NMCLI --mode tabular --color yes -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -21996,7 +22406,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 436 -location: clients/tests/test-client.py:1089:test_004()/382 +location: clients/tests/test-client.py:1089:test_004()/396 cmd: $NMCLI --mode tabular --color yes -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -22009,7 +22419,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 1031 -location: clients/tests/test-client.py:1092:test_004()/383 +location: clients/tests/test-client.py:1092:test_004()/397 cmd: $NMCLI --mode tabular --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -22022,7 +22432,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ <<< size: 1059 -location: clients/tests/test-client.py:1092:test_004()/384 +location: clients/tests/test-client.py:1092:test_004()/398 cmd: $NMCLI --mode tabular --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -22035,7 +22445,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN <<< size: 3270 -location: clients/tests/test-client.py:1094:test_004()/385 +location: clients/tests/test-client.py:1094:test_004()/399 cmd: $NMCLI --mode tabular --color yes -f ALL device show wlan0 lang: C returncode: 0 @@ -22072,7 +22482,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 3333 -location: clients/tests/test-client.py:1094:test_004()/386 +location: clients/tests/test-client.py:1094:test_004()/400 cmd: $NMCLI --mode tabular --color yes -f ALL device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -22109,7 +22519,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 1155 -location: clients/tests/test-client.py:1096:test_004()/387 +location: clients/tests/test-client.py:1096:test_004()/401 cmd: $NMCLI --mode tabular --color yes -f COMMON device show wlan0 lang: C returncode: 0 @@ -22144,7 +22554,7 @@ IP6 -- -- dst = 2001:a::dd5b:aa7b:b4a2:e42/102, nh = ::, mt = 250 <<< size: 1166 -location: clients/tests/test-client.py:1096:test_004()/388 +location: clients/tests/test-client.py:1096:test_004()/402 cmd: $NMCLI --mode tabular --color yes -f COMMON device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -22179,7 +22589,7 @@ IP6 -- -- dst = 2001:a::dd5b:aa7b:b4a2:e42/102, nh = ::, mt = 250 <<< size: 3408 -location: clients/tests/test-client.py:1098:test_004()/389 +location: clients/tests/test-client.py:1098:test_004()/403 cmd: $NMCLI --mode tabular --color yes -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: C returncode: 0 @@ -22216,7 +22626,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 3471 -location: clients/tests/test-client.py:1098:test_004()/390 +location: clients/tests/test-client.py:1098:test_004()/404 cmd: $NMCLI --mode tabular --color yes -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -22251,9 +22661,35 @@ DHCP6 dhcp-6-opt-1 = val-1 | dhcp-6-opt-2 = val-2 | dhcp-6-opt-3 = val-3 | dhcp NAME AVAILABLE-CONNECTION-PATHS AVAILABLE-CONNECTIONS CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-xx1-REPLACED-REPLACED-REPLA | con-xx1 +<<< +size: 1157 +location: clients/tests/test-client.py:1101:test_004()/405 +cmd: $NMCLI --mode tabular --color yes dev lldp list ifname eth0 +lang: C +returncode: 0 +stdout: 984 bytes +>>> +DEVICE CHASSIS-ID PORT-ID PORT-DESCRIPTION SYSTEM-NAME SYSTEM-DESCRIPTION SYSTEM-CAPABILITIES +eth0 00:11:22:33:44:00 Uplink port GigabitEthernet #1 test1.example.com Test system #1 20 (mac-bridge,router) +eth0 chassis1 44:44:44:44:44:44 GigabitEthernet #2 test2.example.com Test system #2 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +eth0 00:11:22:33:44:22 port1 GigabitEthernet #3 test3.example.com Test system #3 40 (wlan-access-point,telephone) + +<<< +size: 1167 +location: clients/tests/test-client.py:1101:test_004()/406 +cmd: $NMCLI --mode tabular --color yes dev lldp list ifname eth0 +lang: pl_PL.UTF-8 +returncode: 0 +stdout: 984 bytes +>>> +DEVICE CHASSIS-ID PORT-ID PORT-DESCRIPTION SYSTEM-NAME SYSTEM-DESCRIPTION SYSTEM-CAPABILITIES +eth0 00:11:22:33:44:00 Uplink port GigabitEthernet #1 test1.example.com Test system #1 20 (mac-bridge,router) +eth0 chassis1 44:44:44:44:44:44 GigabitEthernet #2 test2.example.com Test system #2 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +eth0 00:11:22:33:44:22 port1 GigabitEthernet #3 test3.example.com Test system #3 40 (wlan-access-point,telephone) + <<< size: 4742 -location: clients/tests/test-client.py:1036:test_004()/391 +location: clients/tests/test-client.py:1036:test_004()/407 cmd: $NMCLI --mode tabular --pretty con s con-vpn-1 lang: C returncode: 0 @@ -22295,7 +22731,7 @@ VPN openvpn -- -- *** VPN connection con-vpn-1 *** 5 - VPN conn <<< size: 4798 -location: clients/tests/test-client.py:1036:test_004()/392 +location: clients/tests/test-client.py:1036:test_004()/408 cmd: $NMCLI --mode tabular --pretty con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -22337,7 +22773,7 @@ VPN openvpn -- -- *** VPN connection con-vpn-1 *** 5 — Połą <<< size: 4742 -location: clients/tests/test-client.py:1038:test_004()/393 +location: clients/tests/test-client.py:1038:test_004()/409 cmd: $NMCLI --mode tabular --pretty con s con-vpn-1 lang: C returncode: 0 @@ -22379,7 +22815,7 @@ VPN openvpn -- -- *** VPN connection con-vpn-1 *** 5 - VPN conn <<< size: 4798 -location: clients/tests/test-client.py:1038:test_004()/394 +location: clients/tests/test-client.py:1038:test_004()/410 cmd: $NMCLI --mode tabular --pretty con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -22421,7 +22857,7 @@ VPN openvpn -- -- *** VPN connection con-vpn-1 *** 5 — Połą <<< size: 3428 -location: clients/tests/test-client.py:1041:test_004()/395 +location: clients/tests/test-client.py:1041:test_004()/411 cmd: $NMCLI --mode tabular --pretty -f ALL con s con-vpn-1 lang: C returncode: 0 @@ -22453,7 +22889,7 @@ proxy none no -- -- <<< size: 3451 -location: clients/tests/test-client.py:1041:test_004()/396 +location: clients/tests/test-client.py:1041:test_004()/412 cmd: $NMCLI --mode tabular --pretty -f ALL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -22485,7 +22921,7 @@ proxy none nie -- -- <<< size: 676 -location: clients/tests/test-client.py:1047:test_004()/397 +location: clients/tests/test-client.py:1047:test_004()/413 cmd: $NMCLI --mode tabular --pretty -f VPN con s con-vpn-1 lang: C returncode: 0 @@ -22500,7 +22936,7 @@ vpn org.freedesktop.NetworkManager.openvpn -- key1 = val1, key2 = val <<< size: 696 -location: clients/tests/test-client.py:1047:test_004()/398 +location: clients/tests/test-client.py:1047:test_004()/414 cmd: $NMCLI --mode tabular --pretty -f VPN con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -22515,7 +22951,7 @@ vpn org.freedesktop.NetworkManager.openvpn -- key1 = val1, key2 = val <<< size: 1106 -location: clients/tests/test-client.py:1050:test_004()/399 +location: clients/tests/test-client.py:1050:test_004()/415 cmd: $NMCLI --mode tabular --pretty -f GENERAL con s con-vpn-1 lang: C returncode: 0 @@ -22530,7 +22966,7 @@ GENERAL con-vpn-1 UUID-con-vpn-1-REPLACED-REPLACED-REP wlan0 activated no <<< size: 1138 -location: clients/tests/test-client.py:1050:test_004()/400 +location: clients/tests/test-client.py:1050:test_004()/416 cmd: $NMCLI --mode tabular --pretty -f GENERAL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -22545,7 +22981,7 @@ GENERAL con-vpn-1 UUID-con-vpn-1-REPLACED-REPLACED-REP wlan0 aktywowano n <<< size: 537 -location: clients/tests/test-client.py:1053:test_004()/401 +location: clients/tests/test-client.py:1053:test_004()/417 cmd: $NMCLI --mode tabular --pretty dev s lang: C returncode: 0 @@ -22564,7 +23000,7 @@ wlan1 wifi unavailable -- <<< size: 545 -location: clients/tests/test-client.py:1053:test_004()/402 +location: clients/tests/test-client.py:1053:test_004()/418 cmd: $NMCLI --mode tabular --pretty dev s lang: pl_PL.UTF-8 returncode: 0 @@ -22583,7 +23019,7 @@ wlan1 wifi niedostępne -- <<< size: 1733 -location: clients/tests/test-client.py:1056:test_004()/403 +location: clients/tests/test-client.py:1056:test_004()/419 cmd: $NMCLI --mode tabular --pretty -f all dev status lang: C returncode: 0 @@ -22602,7 +23038,7 @@ wlan1 wifi unavailable unknown unknown /org/freedesk <<< size: 1741 -location: clients/tests/test-client.py:1056:test_004()/404 +location: clients/tests/test-client.py:1056:test_004()/420 cmd: $NMCLI --mode tabular --pretty -f all dev status lang: pl_PL.UTF-8 returncode: 0 @@ -22621,7 +23057,7 @@ wlan1 wifi niedostępne nieznane nieznane /org/freedes <<< size: 9891 -location: clients/tests/test-client.py:1059:test_004()/405 +location: clients/tests/test-client.py:1059:test_004()/421 cmd: $NMCLI --mode tabular --pretty dev show lang: C returncode: 0 @@ -22832,7 +23268,7 @@ IP6 2001:a::88ca:3654:96b:ab44/89 -- dst = 2001:a::cc8b:7c09:4673:bbb0 <<< size: 10067 -location: clients/tests/test-client.py:1059:test_004()/406 +location: clients/tests/test-client.py:1059:test_004()/422 cmd: $NMCLI --mode tabular --pretty dev show lang: pl_PL.UTF-8 returncode: 0 @@ -23043,7 +23479,7 @@ IP6 2001:a::88ca:3654:96b:ab44/89 -- dst = 2001:a::cc8b:7c09:4673:bbb0 <<< size: 22590 -location: clients/tests/test-client.py:1062:test_004()/407 +location: clients/tests/test-client.py:1062:test_004()/423 cmd: $NMCLI --mode tabular --pretty -f all dev show lang: C returncode: 0 @@ -23239,7 +23675,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 22951 -location: clients/tests/test-client.py:1062:test_004()/408 +location: clients/tests/test-client.py:1062:test_004()/424 cmd: $NMCLI --mode tabular --pretty -f all dev show lang: pl_PL.UTF-8 returncode: 0 @@ -23435,7 +23871,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 1714 -location: clients/tests/test-client.py:1065:test_004()/409 +location: clients/tests/test-client.py:1065:test_004()/425 cmd: $NMCLI --mode tabular --pretty dev show wlan0 lang: C returncode: 0 @@ -23482,7 +23918,7 @@ IP6 -- -- dst = 2001:a::dd5b:aa7b:b4a2:e42/102, nh = ::, mt = 250 <<< size: 1754 -location: clients/tests/test-client.py:1065:test_004()/410 +location: clients/tests/test-client.py:1065:test_004()/426 cmd: $NMCLI --mode tabular --pretty dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -23529,7 +23965,7 @@ IP6 -- -- dst = 2001:a::dd5b:aa7b:b4a2:e42/102, nh = ::, mt = 250 <<< size: 4456 -location: clients/tests/test-client.py:1068:test_004()/411 +location: clients/tests/test-client.py:1068:test_004()/427 cmd: $NMCLI --mode tabular --pretty -f all dev show wlan0 lang: C returncode: 0 @@ -23578,7 +24014,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 4564 -location: clients/tests/test-client.py:1068:test_004()/412 +location: clients/tests/test-client.py:1068:test_004()/428 cmd: $NMCLI --mode tabular --pretty -f all dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -23627,7 +24063,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 1870 -location: clients/tests/test-client.py:1071:test_004()/413 +location: clients/tests/test-client.py:1071:test_004()/429 cmd: $NMCLI --mode tabular --pretty -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -23650,7 +24086,7 @@ WIFI-PROPERTIES yes yes yes yes yes yes yes unknown unknown <<< size: 1934 -location: clients/tests/test-client.py:1071:test_004()/414 +location: clients/tests/test-client.py:1071:test_004()/430 cmd: $NMCLI --mode tabular --pretty -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -23673,7 +24109,7 @@ WIFI-PROPERTIES tak tak tak tak tak tak tak nieznane nieznane <<< size: 1870 -location: clients/tests/test-client.py:1074:test_004()/415 +location: clients/tests/test-client.py:1074:test_004()/431 cmd: $NMCLI --mode tabular --pretty -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -23696,7 +24132,7 @@ WIFI-PROPERTIES yes yes yes yes yes yes yes unknown unknown <<< size: 1934 -location: clients/tests/test-client.py:1074:test_004()/416 +location: clients/tests/test-client.py:1074:test_004()/432 cmd: $NMCLI --mode tabular --pretty -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -23719,7 +24155,7 @@ WIFI-PROPERTIES tak tak tak tak tak tak tak nieznane nieznane <<< size: 686 -location: clients/tests/test-client.py:1077:test_004()/417 +location: clients/tests/test-client.py:1077:test_004()/433 cmd: $NMCLI --mode tabular --pretty -f DEVICE,TYPE,DBUS-PATH dev lang: C returncode: 0 @@ -23738,7 +24174,7 @@ wlan1 wifi /org/freedesktop/NetworkManager/Devices/5 <<< size: 689 -location: clients/tests/test-client.py:1077:test_004()/418 +location: clients/tests/test-client.py:1077:test_004()/434 cmd: $NMCLI --mode tabular --pretty -f DEVICE,TYPE,DBUS-PATH dev lang: pl_PL.UTF-8 returncode: 0 @@ -23757,7 +24193,7 @@ wlan1 wifi /org/freedesktop/NetworkManager/Devices/5 <<< size: 3041 -location: clients/tests/test-client.py:1080:test_004()/419 +location: clients/tests/test-client.py:1080:test_004()/435 cmd: $NMCLI --mode tabular --pretty -f ALL device wifi list lang: C returncode: 0 @@ -23787,7 +24223,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 3279 -location: clients/tests/test-client.py:1080:test_004()/420 +location: clients/tests/test-client.py:1080:test_004()/436 cmd: $NMCLI --mode tabular --pretty -f ALL device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -23817,7 +24253,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 1167 -location: clients/tests/test-client.py:1082:test_004()/421 +location: clients/tests/test-client.py:1082:test_004()/437 cmd: $NMCLI --mode tabular --pretty -f COMMON device wifi list lang: C returncode: 0 @@ -23847,7 +24283,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 1398 -location: clients/tests/test-client.py:1082:test_004()/422 +location: clients/tests/test-client.py:1082:test_004()/438 cmd: $NMCLI --mode tabular --pretty -f COMMON device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -23877,7 +24313,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 3154 -location: clients/tests/test-client.py:1085:test_004()/423 +location: clients/tests/test-client.py:1085:test_004()/439 cmd: $NMCLI --mode tabular --pretty -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: C returncode: 0 @@ -23907,7 +24343,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 3392 -location: clients/tests/test-client.py:1085:test_004()/424 +location: clients/tests/test-client.py:1085:test_004()/440 cmd: $NMCLI --mode tabular --pretty -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -23937,7 +24373,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 1156 -location: clients/tests/test-client.py:1087:test_004()/425 +location: clients/tests/test-client.py:1087:test_004()/441 cmd: $NMCLI --mode tabular --pretty -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -23954,7 +24390,7 @@ AP[1] wlan0-ap-2 776C616E302D61702D32 C0:E2:BE:E8:EF:B6 Infra 1 2412 MH <<< size: 1244 -location: clients/tests/test-client.py:1087:test_004()/426 +location: clients/tests/test-client.py:1087:test_004()/442 cmd: $NMCLI --mode tabular --pretty -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -23971,7 +24407,7 @@ AP[1] wlan0-ap-2 776C616E302D61702D32 C0:E2:BE:E8:EF:B6 Infrastruktura 1 <<< size: 514 -location: clients/tests/test-client.py:1089:test_004()/427 +location: clients/tests/test-client.py:1089:test_004()/443 cmd: $NMCLI --mode tabular --pretty -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -23988,7 +24424,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 599 -location: clients/tests/test-client.py:1089:test_004()/428 +location: clients/tests/test-client.py:1089:test_004()/444 cmd: $NMCLI --mode tabular --pretty -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -24005,7 +24441,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 1269 -location: clients/tests/test-client.py:1092:test_004()/429 +location: clients/tests/test-client.py:1092:test_004()/445 cmd: $NMCLI --mode tabular --pretty -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -24022,7 +24458,7 @@ AP[1] wlan0-ap-2 776C616E302D61702D32 C0:E2:BE:E8:EF:B6 Infra 1 2412 MH <<< size: 1357 -location: clients/tests/test-client.py:1092:test_004()/430 +location: clients/tests/test-client.py:1092:test_004()/446 cmd: $NMCLI --mode tabular --pretty -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -24039,7 +24475,7 @@ AP[1] wlan0-ap-2 776C616E302D61702D32 C0:E2:BE:E8:EF:B6 Infrastruktura 1 <<< size: 4459 -location: clients/tests/test-client.py:1094:test_004()/431 +location: clients/tests/test-client.py:1094:test_004()/447 cmd: $NMCLI --mode tabular --pretty -f ALL device show wlan0 lang: C returncode: 0 @@ -24088,7 +24524,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 4567 -location: clients/tests/test-client.py:1094:test_004()/432 +location: clients/tests/test-client.py:1094:test_004()/448 cmd: $NMCLI --mode tabular --pretty -f ALL device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -24137,7 +24573,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 1727 -location: clients/tests/test-client.py:1096:test_004()/433 +location: clients/tests/test-client.py:1096:test_004()/449 cmd: $NMCLI --mode tabular --pretty -f COMMON device show wlan0 lang: C returncode: 0 @@ -24184,7 +24620,7 @@ IP6 -- -- dst = 2001:a::dd5b:aa7b:b4a2:e42/102, nh = ::, mt = 250 <<< size: 1767 -location: clients/tests/test-client.py:1096:test_004()/434 +location: clients/tests/test-client.py:1096:test_004()/450 cmd: $NMCLI --mode tabular --pretty -f COMMON device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -24231,7 +24667,7 @@ IP6 -- -- dst = 2001:a::dd5b:aa7b:b4a2:e42/102, nh = ::, mt = 250 <<< size: 4597 -location: clients/tests/test-client.py:1098:test_004()/435 +location: clients/tests/test-client.py:1098:test_004()/451 cmd: $NMCLI --mode tabular --pretty -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: C returncode: 0 @@ -24280,7 +24716,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 4705 -location: clients/tests/test-client.py:1098:test_004()/436 +location: clients/tests/test-client.py:1098:test_004()/452 cmd: $NMCLI --mode tabular --pretty -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -24327,9 +24763,43 @@ NAME AVAILABLE-CONNECTION-PATHS AVAILABLE- ---------------------------------------------------------------------------------------------------------------------- CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-xx1-REPLACED-REPLACED-REPLA | con-xx1 +<<< +size: 1531 +location: clients/tests/test-client.py:1101:test_004()/453 +cmd: $NMCLI --mode tabular --pretty dev lldp list ifname eth0 +lang: C +returncode: 0 +stdout: 1360 bytes +>>> +================================ + Device LLDP neighbors (eth0) +================================ +DEVICE CHASSIS-ID PORT-ID PORT-DESCRIPTION SYSTEM-NAME SYSTEM-DESCRIPTION SYSTEM-CAPABILITIES +-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- +eth0 00:11:22:33:44:00 Uplink port GigabitEthernet #1 test1.example.com Test system #1 20 (mac-bridge,router) +eth0 chassis1 44:44:44:44:44:44 GigabitEthernet #2 test2.example.com Test system #2 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +eth0 00:11:22:33:44:22 port1 GigabitEthernet #3 test3.example.com Test system #3 40 (wlan-access-point,telephone) + +<<< +size: 1555 +location: clients/tests/test-client.py:1101:test_004()/454 +cmd: $NMCLI --mode tabular --pretty dev lldp list ifname eth0 +lang: pl_PL.UTF-8 +returncode: 0 +stdout: 1374 bytes +>>> +=================================== + Sąsiedzi LLDP urządzenia (eth0) +=================================== +DEVICE CHASSIS-ID PORT-ID PORT-DESCRIPTION SYSTEM-NAME SYSTEM-DESCRIPTION SYSTEM-CAPABILITIES +----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- +eth0 00:11:22:33:44:00 Uplink port GigabitEthernet #1 test1.example.com Test system #1 20 (mac-bridge,router) +eth0 chassis1 44:44:44:44:44:44 GigabitEthernet #2 test2.example.com Test system #2 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +eth0 00:11:22:33:44:22 port1 GigabitEthernet #3 test3.example.com Test system #3 40 (wlan-access-point,telephone) + <<< size: 4754 -location: clients/tests/test-client.py:1036:test_004()/437 +location: clients/tests/test-client.py:1036:test_004()/455 cmd: $NMCLI --mode tabular --pretty --color yes con s con-vpn-1 lang: C returncode: 0 @@ -24371,7 +24841,7 @@ VPN openvpn -- -- *** VPN connection con-vpn-1 *** 5 - VPN conn <<< size: 4810 -location: clients/tests/test-client.py:1036:test_004()/438 +location: clients/tests/test-client.py:1036:test_004()/456 cmd: $NMCLI --mode tabular --pretty --color yes con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -24413,7 +24883,7 @@ VPN openvpn -- -- *** VPN connection con-vpn-1 *** 5 — Połą <<< size: 4754 -location: clients/tests/test-client.py:1038:test_004()/439 +location: clients/tests/test-client.py:1038:test_004()/457 cmd: $NMCLI --mode tabular --pretty --color yes con s con-vpn-1 lang: C returncode: 0 @@ -24455,7 +24925,7 @@ VPN openvpn -- -- *** VPN connection con-vpn-1 *** 5 - VPN conn <<< size: 4810 -location: clients/tests/test-client.py:1038:test_004()/440 +location: clients/tests/test-client.py:1038:test_004()/458 cmd: $NMCLI --mode tabular --pretty --color yes con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -24497,7 +24967,7 @@ VPN openvpn -- -- *** VPN connection con-vpn-1 *** 5 — Połą <<< size: 3440 -location: clients/tests/test-client.py:1041:test_004()/441 +location: clients/tests/test-client.py:1041:test_004()/459 cmd: $NMCLI --mode tabular --pretty --color yes -f ALL con s con-vpn-1 lang: C returncode: 0 @@ -24529,7 +24999,7 @@ proxy none no -- -- <<< size: 3463 -location: clients/tests/test-client.py:1041:test_004()/442 +location: clients/tests/test-client.py:1041:test_004()/460 cmd: $NMCLI --mode tabular --pretty --color yes -f ALL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -24561,7 +25031,7 @@ proxy none nie -- -- <<< size: 688 -location: clients/tests/test-client.py:1047:test_004()/443 +location: clients/tests/test-client.py:1047:test_004()/461 cmd: $NMCLI --mode tabular --pretty --color yes -f VPN con s con-vpn-1 lang: C returncode: 0 @@ -24576,7 +25046,7 @@ vpn org.freedesktop.NetworkManager.openvpn -- key1 = val1, key2 = val <<< size: 708 -location: clients/tests/test-client.py:1047:test_004()/444 +location: clients/tests/test-client.py:1047:test_004()/462 cmd: $NMCLI --mode tabular --pretty --color yes -f VPN con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -24591,7 +25061,7 @@ vpn org.freedesktop.NetworkManager.openvpn -- key1 = val1, key2 = val <<< size: 1118 -location: clients/tests/test-client.py:1050:test_004()/445 +location: clients/tests/test-client.py:1050:test_004()/463 cmd: $NMCLI --mode tabular --pretty --color yes -f GENERAL con s con-vpn-1 lang: C returncode: 0 @@ -24606,7 +25076,7 @@ GENERAL con-vpn-1 UUID-con-vpn-1-REPLACED-REPLACED-REP wlan0 activated no <<< size: 1150 -location: clients/tests/test-client.py:1050:test_004()/446 +location: clients/tests/test-client.py:1050:test_004()/464 cmd: $NMCLI --mode tabular --pretty --color yes -f GENERAL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -24621,7 +25091,7 @@ GENERAL con-vpn-1 UUID-con-vpn-1-REPLACED-REPLACED-REP wlan0 aktywowano n <<< size: 709 -location: clients/tests/test-client.py:1053:test_004()/447 +location: clients/tests/test-client.py:1053:test_004()/465 cmd: $NMCLI --mode tabular --pretty --color yes dev s lang: C returncode: 0 @@ -24640,7 +25110,7 @@ DEVICE TYPE STATE CONNECTION <<< size: 717 -location: clients/tests/test-client.py:1053:test_004()/448 +location: clients/tests/test-client.py:1053:test_004()/466 cmd: $NMCLI --mode tabular --pretty --color yes dev s lang: pl_PL.UTF-8 returncode: 0 @@ -24659,7 +25129,7 @@ DEVICE TYPE STATE CONNECTION <<< size: 2105 -location: clients/tests/test-client.py:1056:test_004()/449 +location: clients/tests/test-client.py:1056:test_004()/467 cmd: $NMCLI --mode tabular --pretty --color yes -f all dev status lang: C returncode: 0 @@ -24678,7 +25148,7 @@ DEVICE TYPE STATE IP4-CONNECTIVITY IP6-CONNECTIVITY DBUS-PATH <<< size: 2113 -location: clients/tests/test-client.py:1056:test_004()/450 +location: clients/tests/test-client.py:1056:test_004()/468 cmd: $NMCLI --mode tabular --pretty --color yes -f all dev status lang: pl_PL.UTF-8 returncode: 0 @@ -24697,7 +25167,7 @@ DEVICE TYPE STATE IP4-CONNECTIVITY IP6-CONNECTIVITY DBUS-PATH <<< size: 9903 -location: clients/tests/test-client.py:1059:test_004()/451 +location: clients/tests/test-client.py:1059:test_004()/469 cmd: $NMCLI --mode tabular --pretty --color yes dev show lang: C returncode: 0 @@ -24908,7 +25378,7 @@ IP6 2001:a::88ca:3654:96b:ab44/89 -- dst = 2001:a::cc8b:7c09:4673:bbb0 <<< size: 10079 -location: clients/tests/test-client.py:1059:test_004()/452 +location: clients/tests/test-client.py:1059:test_004()/470 cmd: $NMCLI --mode tabular --pretty --color yes dev show lang: pl_PL.UTF-8 returncode: 0 @@ -25119,7 +25589,7 @@ IP6 2001:a::88ca:3654:96b:ab44/89 -- dst = 2001:a::cc8b:7c09:4673:bbb0 <<< size: 22926 -location: clients/tests/test-client.py:1062:test_004()/453 +location: clients/tests/test-client.py:1062:test_004()/471 cmd: $NMCLI --mode tabular --pretty --color yes -f all dev show lang: C returncode: 0 @@ -25315,7 +25785,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 23287 -location: clients/tests/test-client.py:1062:test_004()/454 +location: clients/tests/test-client.py:1062:test_004()/472 cmd: $NMCLI --mode tabular --pretty --color yes -f all dev show lang: pl_PL.UTF-8 returncode: 0 @@ -25511,7 +25981,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 1726 -location: clients/tests/test-client.py:1065:test_004()/455 +location: clients/tests/test-client.py:1065:test_004()/473 cmd: $NMCLI --mode tabular --pretty --color yes dev show wlan0 lang: C returncode: 0 @@ -25558,7 +26028,7 @@ IP6 -- -- dst = 2001:a::dd5b:aa7b:b4a2:e42/102, nh = ::, mt = 250 <<< size: 1766 -location: clients/tests/test-client.py:1065:test_004()/456 +location: clients/tests/test-client.py:1065:test_004()/474 cmd: $NMCLI --mode tabular --pretty --color yes dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -25605,7 +26075,7 @@ IP6 -- -- dst = 2001:a::dd5b:aa7b:b4a2:e42/102, nh = ::, mt = 250 <<< size: 4711 -location: clients/tests/test-client.py:1068:test_004()/457 +location: clients/tests/test-client.py:1068:test_004()/475 cmd: $NMCLI --mode tabular --pretty --color yes -f all dev show wlan0 lang: C returncode: 0 @@ -25654,7 +26124,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 4819 -location: clients/tests/test-client.py:1068:test_004()/458 +location: clients/tests/test-client.py:1068:test_004()/476 cmd: $NMCLI --mode tabular --pretty --color yes -f all dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -25703,7 +26173,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 1882 -location: clients/tests/test-client.py:1071:test_004()/459 +location: clients/tests/test-client.py:1071:test_004()/477 cmd: $NMCLI --mode tabular --pretty --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -25726,7 +26196,7 @@ WIFI-PROPERTIES yes yes yes yes yes yes yes unknown unknown <<< size: 1946 -location: clients/tests/test-client.py:1071:test_004()/460 +location: clients/tests/test-client.py:1071:test_004()/478 cmd: $NMCLI --mode tabular --pretty --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -25749,7 +26219,7 @@ WIFI-PROPERTIES tak tak tak tak tak tak tak nieznane nieznane <<< size: 1882 -location: clients/tests/test-client.py:1074:test_004()/461 +location: clients/tests/test-client.py:1074:test_004()/479 cmd: $NMCLI --mode tabular --pretty --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -25772,7 +26242,7 @@ WIFI-PROPERTIES yes yes yes yes yes yes yes unknown unknown <<< size: 1946 -location: clients/tests/test-client.py:1074:test_004()/462 +location: clients/tests/test-client.py:1074:test_004()/480 cmd: $NMCLI --mode tabular --pretty --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -25795,7 +26265,7 @@ WIFI-PROPERTIES tak tak tak tak tak tak tak nieznane nieznane <<< size: 818 -location: clients/tests/test-client.py:1077:test_004()/463 +location: clients/tests/test-client.py:1077:test_004()/481 cmd: $NMCLI --mode tabular --pretty --color yes -f DEVICE,TYPE,DBUS-PATH dev lang: C returncode: 0 @@ -25814,7 +26284,7 @@ DEVICE TYPE DBUS-PATH <<< size: 821 -location: clients/tests/test-client.py:1077:test_004()/464 +location: clients/tests/test-client.py:1077:test_004()/482 cmd: $NMCLI --mode tabular --pretty --color yes -f DEVICE,TYPE,DBUS-PATH dev lang: pl_PL.UTF-8 returncode: 0 @@ -25833,7 +26303,7 @@ DEVICE TYPE DBUS-PATH <<< size: 3665 -location: clients/tests/test-client.py:1080:test_004()/465 +location: clients/tests/test-client.py:1080:test_004()/483 cmd: $NMCLI --mode tabular --pretty --color yes -f ALL device wifi list lang: C returncode: 0 @@ -25863,7 +26333,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 3903 -location: clients/tests/test-client.py:1080:test_004()/466 +location: clients/tests/test-client.py:1080:test_004()/484 cmd: $NMCLI --mode tabular --pretty --color yes -f ALL device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -25893,7 +26363,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 1468 -location: clients/tests/test-client.py:1082:test_004()/467 +location: clients/tests/test-client.py:1082:test_004()/485 cmd: $NMCLI --mode tabular --pretty --color yes -f COMMON device wifi list lang: C returncode: 0 @@ -25923,7 +26393,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 1698 -location: clients/tests/test-client.py:1082:test_004()/468 +location: clients/tests/test-client.py:1082:test_004()/486 cmd: $NMCLI --mode tabular --pretty --color yes -f COMMON device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -25953,7 +26423,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 3778 -location: clients/tests/test-client.py:1085:test_004()/469 +location: clients/tests/test-client.py:1085:test_004()/487 cmd: $NMCLI --mode tabular --pretty --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: C returncode: 0 @@ -25983,7 +26453,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 4016 -location: clients/tests/test-client.py:1085:test_004()/470 +location: clients/tests/test-client.py:1085:test_004()/488 cmd: $NMCLI --mode tabular --pretty --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -26013,7 +26483,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY WPA <<< size: 1322 -location: clients/tests/test-client.py:1087:test_004()/471 +location: clients/tests/test-client.py:1087:test_004()/489 cmd: $NMCLI --mode tabular --pretty --color yes -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -26030,7 +26500,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ <<< size: 1409 -location: clients/tests/test-client.py:1087:test_004()/472 +location: clients/tests/test-client.py:1087:test_004()/490 cmd: $NMCLI --mode tabular --pretty --color yes -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -26047,7 +26517,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN <<< size: 598 -location: clients/tests/test-client.py:1089:test_004()/473 +location: clients/tests/test-client.py:1089:test_004()/491 cmd: $NMCLI --mode tabular --pretty --color yes -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -26064,7 +26534,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 683 -location: clients/tests/test-client.py:1089:test_004()/474 +location: clients/tests/test-client.py:1089:test_004()/492 cmd: $NMCLI --mode tabular --pretty --color yes -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -26081,7 +26551,7 @@ IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY <<< size: 1435 -location: clients/tests/test-client.py:1092:test_004()/475 +location: clients/tests/test-client.py:1092:test_004()/493 cmd: $NMCLI --mode tabular --pretty --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -26098,7 +26568,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN FREQ <<< size: 1522 -location: clients/tests/test-client.py:1092:test_004()/476 +location: clients/tests/test-client.py:1092:test_004()/494 cmd: $NMCLI --mode tabular --pretty --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -26115,7 +26585,7 @@ NAME SSID SSID-HEX BSSID MODE CHAN <<< size: 4714 -location: clients/tests/test-client.py:1094:test_004()/477 +location: clients/tests/test-client.py:1094:test_004()/495 cmd: $NMCLI --mode tabular --pretty --color yes -f ALL device show wlan0 lang: C returncode: 0 @@ -26164,7 +26634,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 4822 -location: clients/tests/test-client.py:1094:test_004()/478 +location: clients/tests/test-client.py:1094:test_004()/496 cmd: $NMCLI --mode tabular --pretty --color yes -f ALL device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -26213,7 +26683,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 1739 -location: clients/tests/test-client.py:1096:test_004()/479 +location: clients/tests/test-client.py:1096:test_004()/497 cmd: $NMCLI --mode tabular --pretty --color yes -f COMMON device show wlan0 lang: C returncode: 0 @@ -26260,7 +26730,7 @@ IP6 -- -- dst = 2001:a::dd5b:aa7b:b4a2:e42/102, nh = ::, mt = 250 <<< size: 1779 -location: clients/tests/test-client.py:1096:test_004()/480 +location: clients/tests/test-client.py:1096:test_004()/498 cmd: $NMCLI --mode tabular --pretty --color yes -f COMMON device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -26307,7 +26777,7 @@ IP6 -- -- dst = 2001:a::dd5b:aa7b:b4a2:e42/102, nh = ::, mt = 250 <<< size: 4852 -location: clients/tests/test-client.py:1098:test_004()/481 +location: clients/tests/test-client.py:1098:test_004()/499 cmd: $NMCLI --mode tabular --pretty --color yes -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: C returncode: 0 @@ -26356,7 +26826,7 @@ CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-x <<< size: 4960 -location: clients/tests/test-client.py:1098:test_004()/482 +location: clients/tests/test-client.py:1098:test_004()/500 cmd: $NMCLI --mode tabular --pretty --color yes -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -26403,9 +26873,43 @@ NAME AVAILABLE-CONNECTION-PATHS AVAILABLE- ---------------------------------------------------------------------------------------------------------------------- CONNECTIONS /org/freedesktop/NetworkManager/Settings/Connection/{2} UUID-con-xx1-REPLACED-REPLACED-REPLA | con-xx1 +<<< +size: 1543 +location: clients/tests/test-client.py:1101:test_004()/501 +cmd: $NMCLI --mode tabular --pretty --color yes dev lldp list ifname eth0 +lang: C +returncode: 0 +stdout: 1360 bytes +>>> +================================ + Device LLDP neighbors (eth0) +================================ +DEVICE CHASSIS-ID PORT-ID PORT-DESCRIPTION SYSTEM-NAME SYSTEM-DESCRIPTION SYSTEM-CAPABILITIES +-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- +eth0 00:11:22:33:44:00 Uplink port GigabitEthernet #1 test1.example.com Test system #1 20 (mac-bridge,router) +eth0 chassis1 44:44:44:44:44:44 GigabitEthernet #2 test2.example.com Test system #2 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +eth0 00:11:22:33:44:22 port1 GigabitEthernet #3 test3.example.com Test system #3 40 (wlan-access-point,telephone) + +<<< +size: 1567 +location: clients/tests/test-client.py:1101:test_004()/502 +cmd: $NMCLI --mode tabular --pretty --color yes dev lldp list ifname eth0 +lang: pl_PL.UTF-8 +returncode: 0 +stdout: 1374 bytes +>>> +=================================== + Sąsiedzi LLDP urządzenia (eth0) +=================================== +DEVICE CHASSIS-ID PORT-ID PORT-DESCRIPTION SYSTEM-NAME SYSTEM-DESCRIPTION SYSTEM-CAPABILITIES +----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- +eth0 00:11:22:33:44:00 Uplink port GigabitEthernet #1 test1.example.com Test system #1 20 (mac-bridge,router) +eth0 chassis1 44:44:44:44:44:44 GigabitEthernet #2 test2.example.com Test system #2 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +eth0 00:11:22:33:44:22 port1 GigabitEthernet #3 test3.example.com Test system #3 40 (wlan-access-point,telephone) + <<< size: 791 -location: clients/tests/test-client.py:1036:test_004()/483 +location: clients/tests/test-client.py:1036:test_004()/503 cmd: $NMCLI --mode tabular --terse con s con-vpn-1 lang: C returncode: 0 @@ -26421,7 +26925,7 @@ VPN:openvpn:::*** VPN connection con-vpn-1 ***:5 - VPN connected:key1 = val1 | k <<< size: 801 -location: clients/tests/test-client.py:1036:test_004()/484 +location: clients/tests/test-client.py:1036:test_004()/504 cmd: $NMCLI --mode tabular --terse con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -26437,7 +26941,7 @@ VPN:openvpn:::*** VPN connection con-vpn-1 ***:5 - VPN connected:key1 = val1 | k <<< size: 791 -location: clients/tests/test-client.py:1038:test_004()/485 +location: clients/tests/test-client.py:1038:test_004()/505 cmd: $NMCLI --mode tabular --terse con s con-vpn-1 lang: C returncode: 0 @@ -26453,7 +26957,7 @@ VPN:openvpn:::*** VPN connection con-vpn-1 ***:5 - VPN connected:key1 = val1 | k <<< size: 801 -location: clients/tests/test-client.py:1038:test_004()/486 +location: clients/tests/test-client.py:1038:test_004()/506 cmd: $NMCLI --mode tabular --terse con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -26469,7 +26973,7 @@ VPN:openvpn:::*** VPN connection con-vpn-1 ***:5 - VPN connected:key1 = val1 | k <<< size: 504 -location: clients/tests/test-client.py:1041:test_004()/487 +location: clients/tests/test-client.py:1041:test_004()/507 cmd: $NMCLI --mode tabular --terse -f ALL con s con-vpn-1 lang: C returncode: 0 @@ -26483,7 +26987,7 @@ proxy:none:no:: <<< size: 514 -location: clients/tests/test-client.py:1041:test_004()/488 +location: clients/tests/test-client.py:1041:test_004()/508 cmd: $NMCLI --mode tabular --terse -f ALL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -26497,7 +27001,7 @@ proxy:none:no:: <<< size: 261 -location: clients/tests/test-client.py:1047:test_004()/489 +location: clients/tests/test-client.py:1047:test_004()/509 cmd: $NMCLI --mode tabular --terse -f VPN con s con-vpn-1 lang: C returncode: 0 @@ -26507,7 +27011,7 @@ vpn:org.freedesktop.NetworkManager.openvpn::key1 = val1, key2 = val2, key3 = val <<< size: 271 -location: clients/tests/test-client.py:1047:test_004()/490 +location: clients/tests/test-client.py:1047:test_004()/510 cmd: $NMCLI --mode tabular --terse -f VPN con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -26517,7 +27021,7 @@ vpn:org.freedesktop.NetworkManager.openvpn::key1 = val1, key2 = val2, key3 = val <<< size: 359 -location: clients/tests/test-client.py:1050:test_004()/491 +location: clients/tests/test-client.py:1050:test_004()/511 cmd: $NMCLI --mode tabular --terse -f GENERAL con s con-vpn-1 lang: C returncode: 0 @@ -26527,7 +27031,7 @@ GENERAL:con-vpn-1:UUID-con-vpn-1-REPLACED-REPLACED-REP:wlan0:activated:no:no::ye <<< size: 369 -location: clients/tests/test-client.py:1050:test_004()/492 +location: clients/tests/test-client.py:1050:test_004()/512 cmd: $NMCLI --mode tabular --terse -f GENERAL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -26537,7 +27041,7 @@ GENERAL:con-vpn-1:UUID-con-vpn-1-REPLACED-REPLACED-REP:wlan0:activated:no:no::ye <<< size: 284 -location: clients/tests/test-client.py:1053:test_004()/493 +location: clients/tests/test-client.py:1053:test_004()/513 cmd: $NMCLI --mode tabular --terse dev s lang: C returncode: 0 @@ -26551,7 +27055,7 @@ wlan1:wifi:unavailable: <<< size: 294 -location: clients/tests/test-client.py:1053:test_004()/494 +location: clients/tests/test-client.py:1053:test_004()/514 cmd: $NMCLI --mode tabular --terse dev s lang: pl_PL.UTF-8 returncode: 0 @@ -26565,7 +27069,7 @@ wlan1:wifi:unavailable: <<< size: 682 -location: clients/tests/test-client.py:1056:test_004()/495 +location: clients/tests/test-client.py:1056:test_004()/515 cmd: $NMCLI --mode tabular --terse -f all dev status lang: C returncode: 0 @@ -26579,7 +27083,7 @@ wlan1:wifi:unavailable:unknown:unknown:/org/freedesktop/NetworkManager/Devices/5 <<< size: 692 -location: clients/tests/test-client.py:1056:test_004()/496 +location: clients/tests/test-client.py:1056:test_004()/516 cmd: $NMCLI --mode tabular --terse -f all dev status lang: pl_PL.UTF-8 returncode: 0 @@ -26593,7 +27097,7 @@ wlan1:wifi:unavailable:unknown:unknown:/org/freedesktop/NetworkManager/Devices/5 <<< size: 3096 -location: clients/tests/test-client.py:1059:test_004()/497 +location: clients/tests/test-client.py:1059:test_004()/517 cmd: $NMCLI --mode tabular --terse dev show lang: C returncode: 0 @@ -26653,7 +27157,7 @@ IP6:2001\:a\:\:88ca\:3654\:96b\:ab44/89::dst = 2001\:a\:\:cc8b\:7c09\:4673\:bbb0 <<< size: 3106 -location: clients/tests/test-client.py:1059:test_004()/498 +location: clients/tests/test-client.py:1059:test_004()/518 cmd: $NMCLI --mode tabular --terse dev show lang: pl_PL.UTF-8 returncode: 0 @@ -26713,7 +27217,7 @@ IP6:2001\:a\:\:88ca\:3654\:96b\:ab44/89::dst = 2001\:a\:\:cc8b\:7c09\:4673\:bbb0 <<< size: 6315 -location: clients/tests/test-client.py:1062:test_004()/499 +location: clients/tests/test-client.py:1062:test_004()/519 cmd: $NMCLI --mode tabular --terse -f all dev show lang: C returncode: 0 @@ -26770,7 +27274,7 @@ CONNECTIONS:/org/freedesktop/NetworkManager/Settings/Connection/{2}:UUID-con-xx1 <<< size: 6361 -location: clients/tests/test-client.py:1062:test_004()/500 +location: clients/tests/test-client.py:1062:test_004()/520 cmd: $NMCLI --mode tabular --terse -f all dev show lang: pl_PL.UTF-8 returncode: 0 @@ -26827,7 +27331,7 @@ CONNECTIONS:/org/freedesktop/NetworkManager/Settings/Connection/{2}:UUID-con-xx1 <<< size: 604 -location: clients/tests/test-client.py:1065:test_004()/501 +location: clients/tests/test-client.py:1065:test_004()/521 cmd: $NMCLI --mode tabular --terse dev show wlan0 lang: C returncode: 0 @@ -26845,7 +27349,7 @@ IP6:::dst = 2001\:a\:\:dd5b\:aa7b\:b4a2\:e42/102, nh = \:\:, mt = 2504159086::se <<< size: 614 -location: clients/tests/test-client.py:1065:test_004()/502 +location: clients/tests/test-client.py:1065:test_004()/522 cmd: $NMCLI --mode tabular --terse dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -26863,7 +27367,7 @@ IP6:::dst = 2001\:a\:\:dd5b\:aa7b\:b4a2\:e42/102, nh = \:\:, mt = 2504159086::se <<< size: 1355 -location: clients/tests/test-client.py:1068:test_004()/503 +location: clients/tests/test-client.py:1068:test_004()/523 cmd: $NMCLI --mode tabular --terse -f all dev show wlan0 lang: C returncode: 0 @@ -26883,7 +27387,7 @@ CONNECTIONS:/org/freedesktop/NetworkManager/Settings/Connection/{2}:UUID-con-xx1 <<< size: 1392 -location: clients/tests/test-client.py:1068:test_004()/504 +location: clients/tests/test-client.py:1068:test_004()/524 cmd: $NMCLI --mode tabular --terse -f all dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -26903,7 +27407,7 @@ CONNECTIONS:/org/freedesktop/NetworkManager/Settings/Connection/{2}:UUID-con-xx1 <<< size: 565 -location: clients/tests/test-client.py:1071:test_004()/505 +location: clients/tests/test-client.py:1071:test_004()/525 cmd: $NMCLI --mode tabular --terse -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -26915,7 +27419,7 @@ WIFI-PROPERTIES:yes:yes:yes:yes:yes:yes:yes:unknown:unknown <<< size: 575 -location: clients/tests/test-client.py:1071:test_004()/506 +location: clients/tests/test-client.py:1071:test_004()/526 cmd: $NMCLI --mode tabular --terse -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -26927,7 +27431,7 @@ WIFI-PROPERTIES:yes:yes:yes:yes:yes:yes:yes:unknown:unknown <<< size: 565 -location: clients/tests/test-client.py:1074:test_004()/507 +location: clients/tests/test-client.py:1074:test_004()/527 cmd: $NMCLI --mode tabular --terse -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -26939,7 +27443,7 @@ WIFI-PROPERTIES:yes:yes:yes:yes:yes:yes:yes:unknown:unknown <<< size: 575 -location: clients/tests/test-client.py:1074:test_004()/508 +location: clients/tests/test-client.py:1074:test_004()/528 cmd: $NMCLI --mode tabular --terse -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -26951,7 +27455,7 @@ WIFI-PROPERTIES:yes:yes:yes:yes:yes:yes:yes:unknown:unknown <<< size: 443 -location: clients/tests/test-client.py:1077:test_004()/509 +location: clients/tests/test-client.py:1077:test_004()/529 cmd: $NMCLI --mode tabular --terse -f DEVICE,TYPE,DBUS-PATH dev lang: C returncode: 0 @@ -26965,7 +27469,7 @@ wlan1:wifi:/org/freedesktop/NetworkManager/Devices/5 <<< size: 453 -location: clients/tests/test-client.py:1077:test_004()/510 +location: clients/tests/test-client.py:1077:test_004()/530 cmd: $NMCLI --mode tabular --terse -f DEVICE,TYPE,DBUS-PATH dev lang: pl_PL.UTF-8 returncode: 0 @@ -26979,7 +27483,7 @@ wlan1:wifi:/org/freedesktop/NetworkManager/Devices/5 <<< size: 1101 -location: clients/tests/test-client.py:1080:test_004()/511 +location: clients/tests/test-client.py:1080:test_004()/531 cmd: $NMCLI --mode tabular --terse -f ALL device wifi list lang: C returncode: 0 @@ -26994,7 +27498,7 @@ AP[1]:wlan1-ap-4:776C616E312D61702D34:94\:2B\:E8\:F6\:D2\:86:Infra:1:2412 MHz:54 <<< size: 1159 -location: clients/tests/test-client.py:1080:test_004()/512 +location: clients/tests/test-client.py:1080:test_004()/532 cmd: $NMCLI --mode tabular --terse -f ALL device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -27009,7 +27513,7 @@ AP[1]:wlan1-ap-4:776C616E312D61702D34:94\:2B\:E8\:F6\:D2\:86:Infrastruktura:1:24 <<< size: 358 -location: clients/tests/test-client.py:1082:test_004()/513 +location: clients/tests/test-client.py:1082:test_004()/533 cmd: $NMCLI --mode tabular --terse -f COMMON device wifi list lang: C returncode: 0 @@ -27024,7 +27528,7 @@ stdout: 188 bytes <<< size: 404 -location: clients/tests/test-client.py:1082:test_004()/514 +location: clients/tests/test-client.py:1082:test_004()/534 cmd: $NMCLI --mode tabular --terse -f COMMON device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -27039,7 +27543,7 @@ stdout: 224 bytes <<< size: 1214 -location: clients/tests/test-client.py:1085:test_004()/515 +location: clients/tests/test-client.py:1085:test_004()/535 cmd: $NMCLI --mode tabular --terse -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: C returncode: 0 @@ -27054,7 +27558,7 @@ AP[1]:wlan1-ap-4:776C616E312D61702D34:94\:2B\:E8\:F6\:D2\:86:Infra:1:2412 MHz:54 <<< size: 1272 -location: clients/tests/test-client.py:1085:test_004()/516 +location: clients/tests/test-client.py:1085:test_004()/536 cmd: $NMCLI --mode tabular --terse -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -27069,7 +27573,7 @@ AP[1]:wlan1-ap-4:776C616E312D61702D34:94\:2B\:E8\:F6\:D2\:86:Infrastruktura:1:24 <<< size: 448 -location: clients/tests/test-client.py:1087:test_004()/517 +location: clients/tests/test-client.py:1087:test_004()/537 cmd: $NMCLI --mode tabular --terse -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -27081,7 +27585,7 @@ AP[1]:wlan0-ap-2:776C616E302D61702D32:C0\:E2\:BE\:E8\:EF\:B6:Infra:1:2412 MHz:54 <<< size: 470 -location: clients/tests/test-client.py:1087:test_004()/518 +location: clients/tests/test-client.py:1087:test_004()/538 cmd: $NMCLI --mode tabular --terse -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -27093,7 +27597,7 @@ AP[1]:wlan0-ap-2:776C616E302D61702D32:C0\:E2\:BE\:E8\:EF\:B6:Infrastruktura:1:24 <<< size: 244 -location: clients/tests/test-client.py:1089:test_004()/519 +location: clients/tests/test-client.py:1089:test_004()/539 cmd: $NMCLI --mode tabular --terse -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -27105,7 +27609,7 @@ stdout: 51 bytes <<< size: 263 -location: clients/tests/test-client.py:1089:test_004()/520 +location: clients/tests/test-client.py:1089:test_004()/540 cmd: $NMCLI --mode tabular --terse -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -27117,7 +27621,7 @@ stdout: 60 bytes <<< size: 561 -location: clients/tests/test-client.py:1092:test_004()/521 +location: clients/tests/test-client.py:1092:test_004()/541 cmd: $NMCLI --mode tabular --terse -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -27129,7 +27633,7 @@ AP[1]:wlan0-ap-2:776C616E302D61702D32:C0\:E2\:BE\:E8\:EF\:B6:Infra:1:2412 MHz:54 <<< size: 583 -location: clients/tests/test-client.py:1092:test_004()/522 +location: clients/tests/test-client.py:1092:test_004()/542 cmd: $NMCLI --mode tabular --terse -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -27141,7 +27645,7 @@ AP[1]:wlan0-ap-2:776C616E302D61702D32:C0\:E2\:BE\:E8\:EF\:B6:Infrastruktura:1:24 <<< size: 1358 -location: clients/tests/test-client.py:1094:test_004()/523 +location: clients/tests/test-client.py:1094:test_004()/543 cmd: $NMCLI --mode tabular --terse -f ALL device show wlan0 lang: C returncode: 0 @@ -27161,7 +27665,7 @@ CONNECTIONS:/org/freedesktop/NetworkManager/Settings/Connection/{2}:UUID-con-xx1 <<< size: 1395 -location: clients/tests/test-client.py:1094:test_004()/524 +location: clients/tests/test-client.py:1094:test_004()/544 cmd: $NMCLI --mode tabular --terse -f ALL device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -27181,7 +27685,7 @@ CONNECTIONS:/org/freedesktop/NetworkManager/Settings/Connection/{2}:UUID-con-xx1 <<< size: 617 -location: clients/tests/test-client.py:1096:test_004()/525 +location: clients/tests/test-client.py:1096:test_004()/545 cmd: $NMCLI --mode tabular --terse -f COMMON device show wlan0 lang: C returncode: 0 @@ -27199,7 +27703,7 @@ IP6:::dst = 2001\:a\:\:dd5b\:aa7b\:b4a2\:e42/102, nh = \:\:, mt = 2504159086::se <<< size: 627 -location: clients/tests/test-client.py:1096:test_004()/526 +location: clients/tests/test-client.py:1096:test_004()/546 cmd: $NMCLI --mode tabular --terse -f COMMON device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -27217,7 +27721,7 @@ IP6:::dst = 2001\:a\:\:dd5b\:aa7b\:b4a2\:e42/102, nh = \:\:, mt = 2504159086::se <<< size: 1496 -location: clients/tests/test-client.py:1098:test_004()/527 +location: clients/tests/test-client.py:1098:test_004()/547 cmd: $NMCLI --mode tabular --terse -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: C returncode: 0 @@ -27237,7 +27741,7 @@ CONNECTIONS:/org/freedesktop/NetworkManager/Settings/Connection/{2}:UUID-con-xx1 <<< size: 1533 -location: clients/tests/test-client.py:1098:test_004()/528 +location: clients/tests/test-client.py:1098:test_004()/548 cmd: $NMCLI --mode tabular --terse -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -27255,9 +27759,33 @@ IP6:::dst = 2001\:a\:\:dd5b\:aa7b\:b4a2\:e42/102, nh = \:\:, mt = 2504159086::se DHCP6:dhcp-6-opt-1 = val-1 | dhcp-6-opt-2 = val-2 | dhcp-6-opt-3 = val-3 | dhcp-6-opt-4 = val-4 | dhcp-6-opt-5 = val-5 CONNECTIONS:/org/freedesktop/NetworkManager/Settings/Connection/{2}:UUID-con-xx1-REPLACED-REPLACED-REPLA | con-xx1 +<<< +size: 632 +location: clients/tests/test-client.py:1101:test_004()/549 +cmd: $NMCLI --mode tabular --terse dev lldp list ifname eth0 +lang: C +returncode: 0 +stdout: 463 bytes +>>> +eth0:00\:11\:22\:33\:44\:00:Uplink port:GigabitEthernet #1:test1.example.com:Test system #1:20 (mac-bridge,router) +eth0:chassis1:44\:44\:44\:44\:44\:44:GigabitEthernet #2:test2.example.com:Test system #2:2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +eth0:00\:11\:22\:33\:44\:22:port1:GigabitEthernet #3:test3.example.com:Test system #3:40 (wlan-access-point,telephone) + +<<< +size: 642 +location: clients/tests/test-client.py:1101:test_004()/550 +cmd: $NMCLI --mode tabular --terse dev lldp list ifname eth0 +lang: pl_PL.UTF-8 +returncode: 0 +stdout: 463 bytes +>>> +eth0:00\:11\:22\:33\:44\:00:Uplink port:GigabitEthernet #1:test1.example.com:Test system #1:20 (mac-bridge,router) +eth0:chassis1:44\:44\:44\:44\:44\:44:GigabitEthernet #2:test2.example.com:Test system #2:2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +eth0:00\:11\:22\:33\:44\:22:port1:GigabitEthernet #3:test3.example.com:Test system #3:40 (wlan-access-point,telephone) + <<< size: 803 -location: clients/tests/test-client.py:1036:test_004()/529 +location: clients/tests/test-client.py:1036:test_004()/551 cmd: $NMCLI --mode tabular --terse --color yes con s con-vpn-1 lang: C returncode: 0 @@ -27273,7 +27801,7 @@ VPN:openvpn:::*** VPN connection con-vpn-1 ***:5 - VPN connected:key1 = val1 | k <<< size: 813 -location: clients/tests/test-client.py:1036:test_004()/530 +location: clients/tests/test-client.py:1036:test_004()/552 cmd: $NMCLI --mode tabular --terse --color yes con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -27289,7 +27817,7 @@ VPN:openvpn:::*** VPN connection con-vpn-1 ***:5 - VPN connected:key1 = val1 | k <<< size: 803 -location: clients/tests/test-client.py:1038:test_004()/531 +location: clients/tests/test-client.py:1038:test_004()/553 cmd: $NMCLI --mode tabular --terse --color yes con s con-vpn-1 lang: C returncode: 0 @@ -27305,7 +27833,7 @@ VPN:openvpn:::*** VPN connection con-vpn-1 ***:5 - VPN connected:key1 = val1 | k <<< size: 813 -location: clients/tests/test-client.py:1038:test_004()/532 +location: clients/tests/test-client.py:1038:test_004()/554 cmd: $NMCLI --mode tabular --terse --color yes con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -27321,7 +27849,7 @@ VPN:openvpn:::*** VPN connection con-vpn-1 ***:5 - VPN connected:key1 = val1 | k <<< size: 516 -location: clients/tests/test-client.py:1041:test_004()/533 +location: clients/tests/test-client.py:1041:test_004()/555 cmd: $NMCLI --mode tabular --terse --color yes -f ALL con s con-vpn-1 lang: C returncode: 0 @@ -27335,7 +27863,7 @@ proxy:none:no:: <<< size: 526 -location: clients/tests/test-client.py:1041:test_004()/534 +location: clients/tests/test-client.py:1041:test_004()/556 cmd: $NMCLI --mode tabular --terse --color yes -f ALL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -27349,7 +27877,7 @@ proxy:none:no:: <<< size: 273 -location: clients/tests/test-client.py:1047:test_004()/535 +location: clients/tests/test-client.py:1047:test_004()/557 cmd: $NMCLI --mode tabular --terse --color yes -f VPN con s con-vpn-1 lang: C returncode: 0 @@ -27359,7 +27887,7 @@ vpn:org.freedesktop.NetworkManager.openvpn::key1 = val1, key2 = val2, key3 = val <<< size: 283 -location: clients/tests/test-client.py:1047:test_004()/536 +location: clients/tests/test-client.py:1047:test_004()/558 cmd: $NMCLI --mode tabular --terse --color yes -f VPN con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -27369,7 +27897,7 @@ vpn:org.freedesktop.NetworkManager.openvpn::key1 = val1, key2 = val2, key3 = val <<< size: 371 -location: clients/tests/test-client.py:1050:test_004()/537 +location: clients/tests/test-client.py:1050:test_004()/559 cmd: $NMCLI --mode tabular --terse --color yes -f GENERAL con s con-vpn-1 lang: C returncode: 0 @@ -27379,7 +27907,7 @@ GENERAL:con-vpn-1:UUID-con-vpn-1-REPLACED-REPLACED-REP:wlan0:activated:no:no::ye <<< size: 381 -location: clients/tests/test-client.py:1050:test_004()/538 +location: clients/tests/test-client.py:1050:test_004()/560 cmd: $NMCLI --mode tabular --terse --color yes -f GENERAL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -27389,7 +27917,7 @@ GENERAL:con-vpn-1:UUID-con-vpn-1-REPLACED-REPLACED-REP:wlan0:activated:no:no::ye <<< size: 456 -location: clients/tests/test-client.py:1053:test_004()/539 +location: clients/tests/test-client.py:1053:test_004()/561 cmd: $NMCLI --mode tabular --terse --color yes dev s lang: C returncode: 0 @@ -27403,7 +27931,7 @@ stdout: 295 bytes <<< size: 466 -location: clients/tests/test-client.py:1053:test_004()/540 +location: clients/tests/test-client.py:1053:test_004()/562 cmd: $NMCLI --mode tabular --terse --color yes dev s lang: pl_PL.UTF-8 returncode: 0 @@ -27417,7 +27945,7 @@ stdout: 295 bytes <<< size: 1054 -location: clients/tests/test-client.py:1056:test_004()/541 +location: clients/tests/test-client.py:1056:test_004()/563 cmd: $NMCLI --mode tabular --terse --color yes -f all dev status lang: C returncode: 0 @@ -27431,7 +27959,7 @@ stdout: 881 bytes <<< size: 1064 -location: clients/tests/test-client.py:1056:test_004()/542 +location: clients/tests/test-client.py:1056:test_004()/564 cmd: $NMCLI --mode tabular --terse --color yes -f all dev status lang: pl_PL.UTF-8 returncode: 0 @@ -27445,7 +27973,7 @@ stdout: 881 bytes <<< size: 3108 -location: clients/tests/test-client.py:1059:test_004()/543 +location: clients/tests/test-client.py:1059:test_004()/565 cmd: $NMCLI --mode tabular --terse --color yes dev show lang: C returncode: 0 @@ -27505,7 +28033,7 @@ IP6:2001\:a\:\:88ca\:3654\:96b\:ab44/89::dst = 2001\:a\:\:cc8b\:7c09\:4673\:bbb0 <<< size: 3118 -location: clients/tests/test-client.py:1059:test_004()/544 +location: clients/tests/test-client.py:1059:test_004()/566 cmd: $NMCLI --mode tabular --terse --color yes dev show lang: pl_PL.UTF-8 returncode: 0 @@ -27565,7 +28093,7 @@ IP6:2001\:a\:\:88ca\:3654\:96b\:ab44/89::dst = 2001\:a\:\:cc8b\:7c09\:4673\:bbb0 <<< size: 6651 -location: clients/tests/test-client.py:1062:test_004()/545 +location: clients/tests/test-client.py:1062:test_004()/567 cmd: $NMCLI --mode tabular --terse --color yes -f all dev show lang: C returncode: 0 @@ -27622,7 +28150,7 @@ CONNECTIONS:/org/freedesktop/NetworkManager/Settings/Connection/{2}:UUID-con-xx1 <<< size: 6697 -location: clients/tests/test-client.py:1062:test_004()/546 +location: clients/tests/test-client.py:1062:test_004()/568 cmd: $NMCLI --mode tabular --terse --color yes -f all dev show lang: pl_PL.UTF-8 returncode: 0 @@ -27679,7 +28207,7 @@ CONNECTIONS:/org/freedesktop/NetworkManager/Settings/Connection/{2}:UUID-con-xx1 <<< size: 616 -location: clients/tests/test-client.py:1065:test_004()/547 +location: clients/tests/test-client.py:1065:test_004()/569 cmd: $NMCLI --mode tabular --terse --color yes dev show wlan0 lang: C returncode: 0 @@ -27697,7 +28225,7 @@ IP6:::dst = 2001\:a\:\:dd5b\:aa7b\:b4a2\:e42/102, nh = \:\:, mt = 2504159086::se <<< size: 626 -location: clients/tests/test-client.py:1065:test_004()/548 +location: clients/tests/test-client.py:1065:test_004()/570 cmd: $NMCLI --mode tabular --terse --color yes dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -27715,7 +28243,7 @@ IP6:::dst = 2001\:a\:\:dd5b\:aa7b\:b4a2\:e42/102, nh = \:\:, mt = 2504159086::se <<< size: 1610 -location: clients/tests/test-client.py:1068:test_004()/549 +location: clients/tests/test-client.py:1068:test_004()/571 cmd: $NMCLI --mode tabular --terse --color yes -f all dev show wlan0 lang: C returncode: 0 @@ -27735,7 +28263,7 @@ CONNECTIONS:/org/freedesktop/NetworkManager/Settings/Connection/{2}:UUID-con-xx1 <<< size: 1647 -location: clients/tests/test-client.py:1068:test_004()/550 +location: clients/tests/test-client.py:1068:test_004()/572 cmd: $NMCLI --mode tabular --terse --color yes -f all dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -27755,7 +28283,7 @@ CONNECTIONS:/org/freedesktop/NetworkManager/Settings/Connection/{2}:UUID-con-xx1 <<< size: 577 -location: clients/tests/test-client.py:1071:test_004()/551 +location: clients/tests/test-client.py:1071:test_004()/573 cmd: $NMCLI --mode tabular --terse --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -27767,7 +28295,7 @@ WIFI-PROPERTIES:yes:yes:yes:yes:yes:yes:yes:unknown:unknown <<< size: 587 -location: clients/tests/test-client.py:1071:test_004()/552 +location: clients/tests/test-client.py:1071:test_004()/574 cmd: $NMCLI --mode tabular --terse --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -27779,7 +28307,7 @@ WIFI-PROPERTIES:yes:yes:yes:yes:yes:yes:yes:unknown:unknown <<< size: 577 -location: clients/tests/test-client.py:1074:test_004()/553 +location: clients/tests/test-client.py:1074:test_004()/575 cmd: $NMCLI --mode tabular --terse --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -27791,7 +28319,7 @@ WIFI-PROPERTIES:yes:yes:yes:yes:yes:yes:yes:unknown:unknown <<< size: 587 -location: clients/tests/test-client.py:1074:test_004()/554 +location: clients/tests/test-client.py:1074:test_004()/576 cmd: $NMCLI --mode tabular --terse --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -27803,7 +28331,7 @@ WIFI-PROPERTIES:yes:yes:yes:yes:yes:yes:yes:unknown:unknown <<< size: 575 -location: clients/tests/test-client.py:1077:test_004()/555 +location: clients/tests/test-client.py:1077:test_004()/577 cmd: $NMCLI --mode tabular --terse --color yes -f DEVICE,TYPE,DBUS-PATH dev lang: C returncode: 0 @@ -27817,7 +28345,7 @@ stdout: 391 bytes <<< size: 585 -location: clients/tests/test-client.py:1077:test_004()/556 +location: clients/tests/test-client.py:1077:test_004()/578 cmd: $NMCLI --mode tabular --terse --color yes -f DEVICE,TYPE,DBUS-PATH dev lang: pl_PL.UTF-8 returncode: 0 @@ -27831,7 +28359,7 @@ stdout: 391 bytes <<< size: 1726 -location: clients/tests/test-client.py:1080:test_004()/557 +location: clients/tests/test-client.py:1080:test_004()/579 cmd: $NMCLI --mode tabular --terse --color yes -f ALL device wifi list lang: C returncode: 0 @@ -27846,7 +28374,7 @@ stdout: 1546 bytes <<< size: 1784 -location: clients/tests/test-client.py:1080:test_004()/558 +location: clients/tests/test-client.py:1080:test_004()/580 cmd: $NMCLI --mode tabular --terse --color yes -f ALL device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -27861,7 +28389,7 @@ stdout: 1594 bytes <<< size: 658 -location: clients/tests/test-client.py:1082:test_004()/559 +location: clients/tests/test-client.py:1082:test_004()/581 cmd: $NMCLI --mode tabular --terse --color yes -f COMMON device wifi list lang: C returncode: 0 @@ -27876,7 +28404,7 @@ stdout: 476 bytes <<< size: 704 -location: clients/tests/test-client.py:1082:test_004()/560 +location: clients/tests/test-client.py:1082:test_004()/582 cmd: $NMCLI --mode tabular --terse --color yes -f COMMON device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -27891,7 +28419,7 @@ stdout: 512 bytes <<< size: 1839 -location: clients/tests/test-client.py:1085:test_004()/561 +location: clients/tests/test-client.py:1085:test_004()/583 cmd: $NMCLI --mode tabular --terse --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: C returncode: 0 @@ -27906,7 +28434,7 @@ stdout: 1546 bytes <<< size: 1897 -location: clients/tests/test-client.py:1085:test_004()/562 +location: clients/tests/test-client.py:1085:test_004()/584 cmd: $NMCLI --mode tabular --terse --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -27921,7 +28449,7 @@ stdout: 1594 bytes <<< size: 613 -location: clients/tests/test-client.py:1087:test_004()/563 +location: clients/tests/test-client.py:1087:test_004()/585 cmd: $NMCLI --mode tabular --terse --color yes -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -27933,7 +28461,7 @@ stdout: 410 bytes <<< size: 635 -location: clients/tests/test-client.py:1087:test_004()/564 +location: clients/tests/test-client.py:1087:test_004()/586 cmd: $NMCLI --mode tabular --terse --color yes -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -27945,7 +28473,7 @@ stdout: 422 bytes <<< size: 329 -location: clients/tests/test-client.py:1089:test_004()/565 +location: clients/tests/test-client.py:1089:test_004()/587 cmd: $NMCLI --mode tabular --terse --color yes -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -27957,7 +28485,7 @@ stdout: 123 bytes <<< size: 348 -location: clients/tests/test-client.py:1089:test_004()/566 +location: clients/tests/test-client.py:1089:test_004()/588 cmd: $NMCLI --mode tabular --terse --color yes -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -27969,7 +28497,7 @@ stdout: 132 bytes <<< size: 726 -location: clients/tests/test-client.py:1092:test_004()/567 +location: clients/tests/test-client.py:1092:test_004()/589 cmd: $NMCLI --mode tabular --terse --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -27981,7 +28509,7 @@ stdout: 410 bytes <<< size: 748 -location: clients/tests/test-client.py:1092:test_004()/568 +location: clients/tests/test-client.py:1092:test_004()/590 cmd: $NMCLI --mode tabular --terse --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -27993,7 +28521,7 @@ stdout: 422 bytes <<< size: 1613 -location: clients/tests/test-client.py:1094:test_004()/569 +location: clients/tests/test-client.py:1094:test_004()/591 cmd: $NMCLI --mode tabular --terse --color yes -f ALL device show wlan0 lang: C returncode: 0 @@ -28013,7 +28541,7 @@ CONNECTIONS:/org/freedesktop/NetworkManager/Settings/Connection/{2}:UUID-con-xx1 <<< size: 1650 -location: clients/tests/test-client.py:1094:test_004()/570 +location: clients/tests/test-client.py:1094:test_004()/592 cmd: $NMCLI --mode tabular --terse --color yes -f ALL device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -28033,7 +28561,7 @@ CONNECTIONS:/org/freedesktop/NetworkManager/Settings/Connection/{2}:UUID-con-xx1 <<< size: 629 -location: clients/tests/test-client.py:1096:test_004()/571 +location: clients/tests/test-client.py:1096:test_004()/593 cmd: $NMCLI --mode tabular --terse --color yes -f COMMON device show wlan0 lang: C returncode: 0 @@ -28051,7 +28579,7 @@ IP6:::dst = 2001\:a\:\:dd5b\:aa7b\:b4a2\:e42/102, nh = \:\:, mt = 2504159086::se <<< size: 639 -location: clients/tests/test-client.py:1096:test_004()/572 +location: clients/tests/test-client.py:1096:test_004()/594 cmd: $NMCLI --mode tabular --terse --color yes -f COMMON device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -28069,7 +28597,7 @@ IP6:::dst = 2001\:a\:\:dd5b\:aa7b\:b4a2\:e42/102, nh = \:\:, mt = 2504159086::se <<< size: 1751 -location: clients/tests/test-client.py:1098:test_004()/573 +location: clients/tests/test-client.py:1098:test_004()/595 cmd: $NMCLI --mode tabular --terse --color yes -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: C returncode: 0 @@ -28089,7 +28617,7 @@ CONNECTIONS:/org/freedesktop/NetworkManager/Settings/Connection/{2}:UUID-con-xx1 <<< size: 1788 -location: clients/tests/test-client.py:1098:test_004()/574 +location: clients/tests/test-client.py:1098:test_004()/596 cmd: $NMCLI --mode tabular --terse --color yes -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -28107,9 +28635,33 @@ IP6:::dst = 2001\:a\:\:dd5b\:aa7b\:b4a2\:e42/102, nh = \:\:, mt = 2504159086::se DHCP6:dhcp-6-opt-1 = val-1 | dhcp-6-opt-2 = val-2 | dhcp-6-opt-3 = val-3 | dhcp-6-opt-4 = val-4 | dhcp-6-opt-5 = val-5 CONNECTIONS:/org/freedesktop/NetworkManager/Settings/Connection/{2}:UUID-con-xx1-REPLACED-REPLACED-REPLA | con-xx1 +<<< +size: 644 +location: clients/tests/test-client.py:1101:test_004()/597 +cmd: $NMCLI --mode tabular --terse --color yes dev lldp list ifname eth0 +lang: C +returncode: 0 +stdout: 463 bytes +>>> +eth0:00\:11\:22\:33\:44\:00:Uplink port:GigabitEthernet #1:test1.example.com:Test system #1:20 (mac-bridge,router) +eth0:chassis1:44\:44\:44\:44\:44\:44:GigabitEthernet #2:test2.example.com:Test system #2:2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +eth0:00\:11\:22\:33\:44\:22:port1:GigabitEthernet #3:test3.example.com:Test system #3:40 (wlan-access-point,telephone) + +<<< +size: 654 +location: clients/tests/test-client.py:1101:test_004()/598 +cmd: $NMCLI --mode tabular --terse --color yes dev lldp list ifname eth0 +lang: pl_PL.UTF-8 +returncode: 0 +stdout: 463 bytes +>>> +eth0:00\:11\:22\:33\:44\:00:Uplink port:GigabitEthernet #1:test1.example.com:Test system #1:20 (mac-bridge,router) +eth0:chassis1:44\:44\:44\:44\:44\:44:GigabitEthernet #2:test2.example.com:Test system #2:2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +eth0:00\:11\:22\:33\:44\:22:port1:GigabitEthernet #3:test3.example.com:Test system #3:40 (wlan-access-point,telephone) + <<< size: 4621 -location: clients/tests/test-client.py:1036:test_004()/575 +location: clients/tests/test-client.py:1036:test_004()/599 cmd: $NMCLI --mode multiline con s con-vpn-1 lang: C returncode: 0 @@ -28211,7 +28763,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 4651 -location: clients/tests/test-client.py:1036:test_004()/576 +location: clients/tests/test-client.py:1036:test_004()/600 cmd: $NMCLI --mode multiline con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -28313,7 +28865,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 4621 -location: clients/tests/test-client.py:1038:test_004()/577 +location: clients/tests/test-client.py:1038:test_004()/601 cmd: $NMCLI --mode multiline con s con-vpn-1 lang: C returncode: 0 @@ -28415,7 +28967,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 4651 -location: clients/tests/test-client.py:1038:test_004()/578 +location: clients/tests/test-client.py:1038:test_004()/602 cmd: $NMCLI --mode multiline con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -28517,7 +29069,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 3540 -location: clients/tests/test-client.py:1041:test_004()/579 +location: clients/tests/test-client.py:1041:test_004()/603 cmd: $NMCLI --mode multiline -f ALL con s con-vpn-1 lang: C returncode: 0 @@ -28599,7 +29151,7 @@ proxy.pac-script: -- <<< size: 3560 -location: clients/tests/test-client.py:1041:test_004()/580 +location: clients/tests/test-client.py:1041:test_004()/604 cmd: $NMCLI --mode multiline -f ALL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -28681,7 +29233,7 @@ proxy.pac-script: -- <<< size: 494 -location: clients/tests/test-client.py:1047:test_004()/581 +location: clients/tests/test-client.py:1047:test_004()/605 cmd: $NMCLI --mode multiline -f VPN con s con-vpn-1 lang: C returncode: 0 @@ -28696,7 +29248,7 @@ vpn.timeout: 0 <<< size: 505 -location: clients/tests/test-client.py:1047:test_004()/582 +location: clients/tests/test-client.py:1047:test_004()/606 cmd: $NMCLI --mode multiline -f VPN con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -28711,7 +29263,7 @@ vpn.timeout: 0 <<< size: 831 -location: clients/tests/test-client.py:1050:test_004()/583 +location: clients/tests/test-client.py:1050:test_004()/607 cmd: $NMCLI --mode multiline -f GENERAL con s con-vpn-1 lang: C returncode: 0 @@ -28732,7 +29284,7 @@ GENERAL.MASTER-PATH: -- <<< size: 844 -location: clients/tests/test-client.py:1050:test_004()/584 +location: clients/tests/test-client.py:1050:test_004()/608 cmd: $NMCLI --mode multiline -f GENERAL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -28753,7 +29305,7 @@ GENERAL.MASTER-PATH: -- <<< size: 1086 -location: clients/tests/test-client.py:1053:test_004()/585 +location: clients/tests/test-client.py:1053:test_004()/609 cmd: $NMCLI --mode multiline dev s lang: C returncode: 0 @@ -28782,7 +29334,7 @@ CONNECTION: -- <<< size: 1101 -location: clients/tests/test-client.py:1053:test_004()/586 +location: clients/tests/test-client.py:1053:test_004()/610 cmd: $NMCLI --mode multiline dev s lang: pl_PL.UTF-8 returncode: 0 @@ -28811,7 +29363,7 @@ CONNECTION: -- <<< size: 2501 -location: clients/tests/test-client.py:1056:test_004()/587 +location: clients/tests/test-client.py:1056:test_004()/611 cmd: $NMCLI --mode multiline -f all dev status lang: C returncode: 0 @@ -28865,7 +29417,7 @@ CON-PATH: -- <<< size: 2526 -location: clients/tests/test-client.py:1056:test_004()/588 +location: clients/tests/test-client.py:1056:test_004()/612 cmd: $NMCLI --mode multiline -f all dev status lang: pl_PL.UTF-8 returncode: 0 @@ -28919,7 +29471,7 @@ CON-PATH: -- <<< size: 8065 -location: clients/tests/test-client.py:1059:test_004()/589 +location: clients/tests/test-client.py:1059:test_004()/613 cmd: $NMCLI --mode multiline dev show lang: C returncode: 0 @@ -29065,7 +29617,7 @@ IP6.DOMAIN[1]: sear6.fo.x.y <<< size: 8096 -location: clients/tests/test-client.py:1059:test_004()/590 +location: clients/tests/test-client.py:1059:test_004()/614 cmd: $NMCLI --mode multiline dev show lang: pl_PL.UTF-8 returncode: 0 @@ -29211,7 +29763,7 @@ IP6.DOMAIN[1]: sear6.fo.x.y <<< size: 20678 -location: clients/tests/test-client.py:1062:test_004()/591 +location: clients/tests/test-client.py:1062:test_004()/615 cmd: $NMCLI --mode multiline -f all dev show lang: C returncode: 0 @@ -29600,7 +30152,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 20828 -location: clients/tests/test-client.py:1062:test_004()/592 +location: clients/tests/test-client.py:1062:test_004()/616 cmd: $NMCLI --mode multiline -f all dev show lang: pl_PL.UTF-8 returncode: 0 @@ -29989,7 +30541,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 1516 -location: clients/tests/test-client.py:1065:test_004()/593 +location: clients/tests/test-client.py:1065:test_004()/617 cmd: $NMCLI --mode multiline dev show wlan0 lang: C returncode: 0 @@ -30022,7 +30574,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 1527 -location: clients/tests/test-client.py:1065:test_004()/594 +location: clients/tests/test-client.py:1065:test_004()/618 cmd: $NMCLI --mode multiline dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -30055,7 +30607,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 4865 -location: clients/tests/test-client.py:1068:test_004()/595 +location: clients/tests/test-client.py:1068:test_004()/619 cmd: $NMCLI --mode multiline -f all dev show wlan0 lang: C returncode: 0 @@ -30155,7 +30707,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 4920 -location: clients/tests/test-client.py:1068:test_004()/596 +location: clients/tests/test-client.py:1068:test_004()/620 cmd: $NMCLI --mode multiline -f all dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -30255,7 +30807,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 1978 -location: clients/tests/test-client.py:1071:test_004()/597 +location: clients/tests/test-client.py:1071:test_004()/621 cmd: $NMCLI --mode multiline -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -30300,7 +30852,7 @@ WIFI-PROPERTIES.5GHZ: unknown <<< size: 2002 -location: clients/tests/test-client.py:1071:test_004()/598 +location: clients/tests/test-client.py:1071:test_004()/622 cmd: $NMCLI --mode multiline -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -30345,7 +30897,7 @@ WIFI-PROPERTIES.5GHZ: nieznane <<< size: 1978 -location: clients/tests/test-client.py:1074:test_004()/599 +location: clients/tests/test-client.py:1074:test_004()/623 cmd: $NMCLI --mode multiline -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -30390,7 +30942,7 @@ WIFI-PROPERTIES.5GHZ: unknown <<< size: 2002 -location: clients/tests/test-client.py:1074:test_004()/600 +location: clients/tests/test-client.py:1074:test_004()/624 cmd: $NMCLI --mode multiline -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -30435,7 +30987,7 @@ WIFI-PROPERTIES.5GHZ: nieznane <<< size: 1037 -location: clients/tests/test-client.py:1077:test_004()/601 +location: clients/tests/test-client.py:1077:test_004()/625 cmd: $NMCLI --mode multiline -f DEVICE,TYPE,DBUS-PATH dev lang: C returncode: 0 @@ -30459,7 +31011,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Devices/ <<< size: 1047 -location: clients/tests/test-client.py:1077:test_004()/602 +location: clients/tests/test-client.py:1077:test_004()/626 cmd: $NMCLI --mode multiline -f DEVICE,TYPE,DBUS-PATH dev lang: pl_PL.UTF-8 returncode: 0 @@ -30483,7 +31035,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Devices/ <<< size: 3796 -location: clients/tests/test-client.py:1080:test_004()/603 +location: clients/tests/test-client.py:1080:test_004()/627 cmd: $NMCLI --mode multiline -f ALL device wifi list lang: C returncode: 0 @@ -30562,7 +31114,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/AccessPo <<< size: 3854 -location: clients/tests/test-client.py:1080:test_004()/604 +location: clients/tests/test-client.py:1080:test_004()/628 cmd: $NMCLI --mode multiline -f ALL device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -30641,7 +31193,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/AccessPo <<< size: 1633 -location: clients/tests/test-client.py:1082:test_004()/605 +location: clients/tests/test-client.py:1082:test_004()/629 cmd: $NMCLI --mode multiline -f COMMON device wifi list lang: C returncode: 0 @@ -30684,7 +31236,7 @@ SECURITY: WPA1 WPA2 <<< size: 1679 -location: clients/tests/test-client.py:1082:test_004()/606 +location: clients/tests/test-client.py:1082:test_004()/630 cmd: $NMCLI --mode multiline -f COMMON device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -30727,7 +31279,7 @@ SECURITY: WPA1 WPA2 <<< size: 3909 -location: clients/tests/test-client.py:1085:test_004()/607 +location: clients/tests/test-client.py:1085:test_004()/631 cmd: $NMCLI --mode multiline -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: C returncode: 0 @@ -30806,7 +31358,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/AccessPo <<< size: 3967 -location: clients/tests/test-client.py:1085:test_004()/608 +location: clients/tests/test-client.py:1085:test_004()/632 cmd: $NMCLI --mode multiline -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -30885,7 +31437,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/AccessPo <<< size: 1117 -location: clients/tests/test-client.py:1087:test_004()/609 +location: clients/tests/test-client.py:1087:test_004()/633 cmd: $NMCLI --mode multiline -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -30913,7 +31465,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/AccessPo <<< size: 1139 -location: clients/tests/test-client.py:1087:test_004()/610 +location: clients/tests/test-client.py:1087:test_004()/634 cmd: $NMCLI --mode multiline -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -30941,7 +31493,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/AccessPo <<< size: 559 -location: clients/tests/test-client.py:1089:test_004()/611 +location: clients/tests/test-client.py:1089:test_004()/635 cmd: $NMCLI --mode multiline -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -30960,7 +31512,7 @@ SECURITY: WPA1 WPA2 <<< size: 578 -location: clients/tests/test-client.py:1089:test_004()/612 +location: clients/tests/test-client.py:1089:test_004()/636 cmd: $NMCLI --mode multiline -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -30979,7 +31531,7 @@ SECURITY: WPA1 WPA2 <<< size: 1230 -location: clients/tests/test-client.py:1092:test_004()/613 +location: clients/tests/test-client.py:1092:test_004()/637 cmd: $NMCLI --mode multiline -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -31007,7 +31559,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/AccessPo <<< size: 1252 -location: clients/tests/test-client.py:1092:test_004()/614 +location: clients/tests/test-client.py:1092:test_004()/638 cmd: $NMCLI --mode multiline -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -31035,7 +31587,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/AccessPo <<< size: 4868 -location: clients/tests/test-client.py:1094:test_004()/615 +location: clients/tests/test-client.py:1094:test_004()/639 cmd: $NMCLI --mode multiline -f ALL device show wlan0 lang: C returncode: 0 @@ -31135,7 +31687,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 4923 -location: clients/tests/test-client.py:1094:test_004()/616 +location: clients/tests/test-client.py:1094:test_004()/640 cmd: $NMCLI --mode multiline -f ALL device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -31235,7 +31787,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 1529 -location: clients/tests/test-client.py:1096:test_004()/617 +location: clients/tests/test-client.py:1096:test_004()/641 cmd: $NMCLI --mode multiline -f COMMON device show wlan0 lang: C returncode: 0 @@ -31268,7 +31820,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 1540 -location: clients/tests/test-client.py:1096:test_004()/618 +location: clients/tests/test-client.py:1096:test_004()/642 cmd: $NMCLI --mode multiline -f COMMON device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -31301,7 +31853,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 5006 -location: clients/tests/test-client.py:1098:test_004()/619 +location: clients/tests/test-client.py:1098:test_004()/643 cmd: $NMCLI --mode multiline -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: C returncode: 0 @@ -31401,7 +31953,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 5061 -location: clients/tests/test-client.py:1098:test_004()/620 +location: clients/tests/test-client.py:1098:test_004()/644 cmd: $NMCLI --mode multiline -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -31499,9 +32051,69 @@ DHCP6.OPTION[5]: dhcp-6-opt-5 = val-5 CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/Connection/{2} CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | con-xx1 +<<< +size: 1452 +location: clients/tests/test-client.py:1101:test_004()/645 +cmd: $NMCLI --mode multiline dev lldp list ifname eth0 +lang: C +returncode: 0 +stdout: 1288 bytes +>>> +NEIGHBOR[0].DEVICE: eth0 +NEIGHBOR[0].CHASSIS-ID: 00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID: Uplink port +NEIGHBOR[0].PORT-DESCRIPTION: GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME: test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION: Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES: 20 (mac-bridge,router) +NEIGHBOR[1].DEVICE: eth0 +NEIGHBOR[1].CHASSIS-ID: chassis1 +NEIGHBOR[1].PORT-ID: 44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION: GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME: test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION: Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES: 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +NEIGHBOR[2].DEVICE: eth0 +NEIGHBOR[2].CHASSIS-ID: 00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID: port1 +NEIGHBOR[2].PORT-DESCRIPTION: GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME: test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION: Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES: 40 (wlan-access-point,telephone) + +<<< +size: 1462 +location: clients/tests/test-client.py:1101:test_004()/646 +cmd: $NMCLI --mode multiline dev lldp list ifname eth0 +lang: pl_PL.UTF-8 +returncode: 0 +stdout: 1288 bytes +>>> +NEIGHBOR[0].DEVICE: eth0 +NEIGHBOR[0].CHASSIS-ID: 00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID: Uplink port +NEIGHBOR[0].PORT-DESCRIPTION: GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME: test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION: Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES: 20 (mac-bridge,router) +NEIGHBOR[1].DEVICE: eth0 +NEIGHBOR[1].CHASSIS-ID: chassis1 +NEIGHBOR[1].PORT-ID: 44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION: GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME: test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION: Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES: 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +NEIGHBOR[2].DEVICE: eth0 +NEIGHBOR[2].CHASSIS-ID: 00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID: port1 +NEIGHBOR[2].PORT-DESCRIPTION: GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME: test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION: Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES: 40 (wlan-access-point,telephone) + <<< size: 4633 -location: clients/tests/test-client.py:1036:test_004()/621 +location: clients/tests/test-client.py:1036:test_004()/647 cmd: $NMCLI --mode multiline --color yes con s con-vpn-1 lang: C returncode: 0 @@ -31603,7 +32215,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 4663 -location: clients/tests/test-client.py:1036:test_004()/622 +location: clients/tests/test-client.py:1036:test_004()/648 cmd: $NMCLI --mode multiline --color yes con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -31705,7 +32317,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 4633 -location: clients/tests/test-client.py:1038:test_004()/623 +location: clients/tests/test-client.py:1038:test_004()/649 cmd: $NMCLI --mode multiline --color yes con s con-vpn-1 lang: C returncode: 0 @@ -31807,7 +32419,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 4663 -location: clients/tests/test-client.py:1038:test_004()/624 +location: clients/tests/test-client.py:1038:test_004()/650 cmd: $NMCLI --mode multiline --color yes con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -31909,7 +32521,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 3552 -location: clients/tests/test-client.py:1041:test_004()/625 +location: clients/tests/test-client.py:1041:test_004()/651 cmd: $NMCLI --mode multiline --color yes -f ALL con s con-vpn-1 lang: C returncode: 0 @@ -31991,7 +32603,7 @@ proxy.pac-script: -- <<< size: 3572 -location: clients/tests/test-client.py:1041:test_004()/626 +location: clients/tests/test-client.py:1041:test_004()/652 cmd: $NMCLI --mode multiline --color yes -f ALL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -32073,7 +32685,7 @@ proxy.pac-script: -- <<< size: 506 -location: clients/tests/test-client.py:1047:test_004()/627 +location: clients/tests/test-client.py:1047:test_004()/653 cmd: $NMCLI --mode multiline --color yes -f VPN con s con-vpn-1 lang: C returncode: 0 @@ -32088,7 +32700,7 @@ vpn.timeout: 0 <<< size: 517 -location: clients/tests/test-client.py:1047:test_004()/628 +location: clients/tests/test-client.py:1047:test_004()/654 cmd: $NMCLI --mode multiline --color yes -f VPN con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -32103,7 +32715,7 @@ vpn.timeout: 0 <<< size: 843 -location: clients/tests/test-client.py:1050:test_004()/629 +location: clients/tests/test-client.py:1050:test_004()/655 cmd: $NMCLI --mode multiline --color yes -f GENERAL con s con-vpn-1 lang: C returncode: 0 @@ -32124,7 +32736,7 @@ GENERAL.MASTER-PATH: -- <<< size: 856 -location: clients/tests/test-client.py:1050:test_004()/630 +location: clients/tests/test-client.py:1050:test_004()/656 cmd: $NMCLI --mode multiline --color yes -f GENERAL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -32145,7 +32757,7 @@ GENERAL.MASTER-PATH: -- <<< size: 1259 -location: clients/tests/test-client.py:1053:test_004()/631 +location: clients/tests/test-client.py:1053:test_004()/657 cmd: $NMCLI --mode multiline --color yes dev s lang: C returncode: 0 @@ -32174,7 +32786,7 @@ CONNECTION: -- <<< size: 1274 -location: clients/tests/test-client.py:1053:test_004()/632 +location: clients/tests/test-client.py:1053:test_004()/658 cmd: $NMCLI --mode multiline --color yes dev s lang: pl_PL.UTF-8 returncode: 0 @@ -32203,7 +32815,7 @@ CONNECTION: -- <<< size: 2873 -location: clients/tests/test-client.py:1056:test_004()/633 +location: clients/tests/test-client.py:1056:test_004()/659 cmd: $NMCLI --mode multiline --color yes -f all dev status lang: C returncode: 0 @@ -32257,7 +32869,7 @@ CON-PATH: -- <<< size: 2898 -location: clients/tests/test-client.py:1056:test_004()/634 +location: clients/tests/test-client.py:1056:test_004()/660 cmd: $NMCLI --mode multiline --color yes -f all dev status lang: pl_PL.UTF-8 returncode: 0 @@ -32311,7 +32923,7 @@ CON-PATH: -- <<< size: 8077 -location: clients/tests/test-client.py:1059:test_004()/635 +location: clients/tests/test-client.py:1059:test_004()/661 cmd: $NMCLI --mode multiline --color yes dev show lang: C returncode: 0 @@ -32457,7 +33069,7 @@ IP6.DOMAIN[1]: sear6.fo.x.y <<< size: 8108 -location: clients/tests/test-client.py:1059:test_004()/636 +location: clients/tests/test-client.py:1059:test_004()/662 cmd: $NMCLI --mode multiline --color yes dev show lang: pl_PL.UTF-8 returncode: 0 @@ -32603,7 +33215,7 @@ IP6.DOMAIN[1]: sear6.fo.x.y <<< size: 20978 -location: clients/tests/test-client.py:1062:test_004()/637 +location: clients/tests/test-client.py:1062:test_004()/663 cmd: $NMCLI --mode multiline --color yes -f all dev show lang: C returncode: 0 @@ -32992,7 +33604,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 21128 -location: clients/tests/test-client.py:1062:test_004()/638 +location: clients/tests/test-client.py:1062:test_004()/664 cmd: $NMCLI --mode multiline --color yes -f all dev show lang: pl_PL.UTF-8 returncode: 0 @@ -33381,7 +33993,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 1528 -location: clients/tests/test-client.py:1065:test_004()/639 +location: clients/tests/test-client.py:1065:test_004()/665 cmd: $NMCLI --mode multiline --color yes dev show wlan0 lang: C returncode: 0 @@ -33414,7 +34026,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 1539 -location: clients/tests/test-client.py:1065:test_004()/640 +location: clients/tests/test-client.py:1065:test_004()/666 cmd: $NMCLI --mode multiline --color yes dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -33447,7 +34059,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 5093 -location: clients/tests/test-client.py:1068:test_004()/641 +location: clients/tests/test-client.py:1068:test_004()/667 cmd: $NMCLI --mode multiline --color yes -f all dev show wlan0 lang: C returncode: 0 @@ -33547,7 +34159,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 5148 -location: clients/tests/test-client.py:1068:test_004()/642 +location: clients/tests/test-client.py:1068:test_004()/668 cmd: $NMCLI --mode multiline --color yes -f all dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -33647,7 +34259,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 1990 -location: clients/tests/test-client.py:1071:test_004()/643 +location: clients/tests/test-client.py:1071:test_004()/669 cmd: $NMCLI --mode multiline --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -33692,7 +34304,7 @@ WIFI-PROPERTIES.5GHZ: unknown <<< size: 2014 -location: clients/tests/test-client.py:1071:test_004()/644 +location: clients/tests/test-client.py:1071:test_004()/670 cmd: $NMCLI --mode multiline --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -33737,7 +34349,7 @@ WIFI-PROPERTIES.5GHZ: nieznane <<< size: 1990 -location: clients/tests/test-client.py:1074:test_004()/645 +location: clients/tests/test-client.py:1074:test_004()/671 cmd: $NMCLI --mode multiline --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -33782,7 +34394,7 @@ WIFI-PROPERTIES.5GHZ: unknown <<< size: 2014 -location: clients/tests/test-client.py:1074:test_004()/646 +location: clients/tests/test-client.py:1074:test_004()/672 cmd: $NMCLI --mode multiline --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -33827,7 +34439,7 @@ WIFI-PROPERTIES.5GHZ: nieznane <<< size: 1169 -location: clients/tests/test-client.py:1077:test_004()/647 +location: clients/tests/test-client.py:1077:test_004()/673 cmd: $NMCLI --mode multiline --color yes -f DEVICE,TYPE,DBUS-PATH dev lang: C returncode: 0 @@ -33851,7 +34463,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Devi <<< size: 1179 -location: clients/tests/test-client.py:1077:test_004()/648 +location: clients/tests/test-client.py:1077:test_004()/674 cmd: $NMCLI --mode multiline --color yes -f DEVICE,TYPE,DBUS-PATH dev lang: pl_PL.UTF-8 returncode: 0 @@ -33875,7 +34487,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Devi <<< size: 4420 -location: clients/tests/test-client.py:1080:test_004()/649 +location: clients/tests/test-client.py:1080:test_004()/675 cmd: $NMCLI --mode multiline --color yes -f ALL device wifi list lang: C returncode: 0 @@ -33954,7 +34566,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Acc <<< size: 4478 -location: clients/tests/test-client.py:1080:test_004()/650 +location: clients/tests/test-client.py:1080:test_004()/676 cmd: $NMCLI --mode multiline --color yes -f ALL device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -34033,7 +34645,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Acc <<< size: 1933 -location: clients/tests/test-client.py:1082:test_004()/651 +location: clients/tests/test-client.py:1082:test_004()/677 cmd: $NMCLI --mode multiline --color yes -f COMMON device wifi list lang: C returncode: 0 @@ -34076,7 +34688,7 @@ SECURITY: WPA1 WPA2 <<< size: 1979 -location: clients/tests/test-client.py:1082:test_004()/652 +location: clients/tests/test-client.py:1082:test_004()/678 cmd: $NMCLI --mode multiline --color yes -f COMMON device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -34119,7 +34731,7 @@ SECURITY: WPA1 WPA2 <<< size: 4533 -location: clients/tests/test-client.py:1085:test_004()/653 +location: clients/tests/test-client.py:1085:test_004()/679 cmd: $NMCLI --mode multiline --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: C returncode: 0 @@ -34198,7 +34810,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Acc <<< size: 4591 -location: clients/tests/test-client.py:1085:test_004()/654 +location: clients/tests/test-client.py:1085:test_004()/680 cmd: $NMCLI --mode multiline --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -34277,7 +34889,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Acc <<< size: 1283 -location: clients/tests/test-client.py:1087:test_004()/655 +location: clients/tests/test-client.py:1087:test_004()/681 cmd: $NMCLI --mode multiline --color yes -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -34305,7 +34917,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Acc <<< size: 1305 -location: clients/tests/test-client.py:1087:test_004()/656 +location: clients/tests/test-client.py:1087:test_004()/682 cmd: $NMCLI --mode multiline --color yes -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -34333,7 +34945,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Acc <<< size: 643 -location: clients/tests/test-client.py:1089:test_004()/657 +location: clients/tests/test-client.py:1089:test_004()/683 cmd: $NMCLI --mode multiline --color yes -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -34352,7 +34964,7 @@ SECURITY: WPA1 WPA2 <<< size: 662 -location: clients/tests/test-client.py:1089:test_004()/658 +location: clients/tests/test-client.py:1089:test_004()/684 cmd: $NMCLI --mode multiline --color yes -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -34371,7 +34983,7 @@ SECURITY: WPA1 WPA2 <<< size: 1396 -location: clients/tests/test-client.py:1092:test_004()/659 +location: clients/tests/test-client.py:1092:test_004()/685 cmd: $NMCLI --mode multiline --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -34399,7 +35011,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Acc <<< size: 1418 -location: clients/tests/test-client.py:1092:test_004()/660 +location: clients/tests/test-client.py:1092:test_004()/686 cmd: $NMCLI --mode multiline --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -34427,7 +35039,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Acc <<< size: 5096 -location: clients/tests/test-client.py:1094:test_004()/661 +location: clients/tests/test-client.py:1094:test_004()/687 cmd: $NMCLI --mode multiline --color yes -f ALL device show wlan0 lang: C returncode: 0 @@ -34527,7 +35139,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 5151 -location: clients/tests/test-client.py:1094:test_004()/662 +location: clients/tests/test-client.py:1094:test_004()/688 cmd: $NMCLI --mode multiline --color yes -f ALL device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -34627,7 +35239,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 1541 -location: clients/tests/test-client.py:1096:test_004()/663 +location: clients/tests/test-client.py:1096:test_004()/689 cmd: $NMCLI --mode multiline --color yes -f COMMON device show wlan0 lang: C returncode: 0 @@ -34660,7 +35272,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 1552 -location: clients/tests/test-client.py:1096:test_004()/664 +location: clients/tests/test-client.py:1096:test_004()/690 cmd: $NMCLI --mode multiline --color yes -f COMMON device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -34693,7 +35305,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 5234 -location: clients/tests/test-client.py:1098:test_004()/665 +location: clients/tests/test-client.py:1098:test_004()/691 cmd: $NMCLI --mode multiline --color yes -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: C returncode: 0 @@ -34793,7 +35405,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 5289 -location: clients/tests/test-client.py:1098:test_004()/666 +location: clients/tests/test-client.py:1098:test_004()/692 cmd: $NMCLI --mode multiline --color yes -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -34891,9 +35503,69 @@ DHCP6.OPTION[5]: dhcp-6-opt-5 = val-5 CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/Connection/{2} CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | con-xx1 +<<< +size: 1464 +location: clients/tests/test-client.py:1101:test_004()/693 +cmd: $NMCLI --mode multiline --color yes dev lldp list ifname eth0 +lang: C +returncode: 0 +stdout: 1288 bytes +>>> +NEIGHBOR[0].DEVICE: eth0 +NEIGHBOR[0].CHASSIS-ID: 00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID: Uplink port +NEIGHBOR[0].PORT-DESCRIPTION: GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME: test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION: Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES: 20 (mac-bridge,router) +NEIGHBOR[1].DEVICE: eth0 +NEIGHBOR[1].CHASSIS-ID: chassis1 +NEIGHBOR[1].PORT-ID: 44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION: GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME: test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION: Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES: 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +NEIGHBOR[2].DEVICE: eth0 +NEIGHBOR[2].CHASSIS-ID: 00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID: port1 +NEIGHBOR[2].PORT-DESCRIPTION: GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME: test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION: Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES: 40 (wlan-access-point,telephone) + +<<< +size: 1474 +location: clients/tests/test-client.py:1101:test_004()/694 +cmd: $NMCLI --mode multiline --color yes dev lldp list ifname eth0 +lang: pl_PL.UTF-8 +returncode: 0 +stdout: 1288 bytes +>>> +NEIGHBOR[0].DEVICE: eth0 +NEIGHBOR[0].CHASSIS-ID: 00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID: Uplink port +NEIGHBOR[0].PORT-DESCRIPTION: GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME: test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION: Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES: 20 (mac-bridge,router) +NEIGHBOR[1].DEVICE: eth0 +NEIGHBOR[1].CHASSIS-ID: chassis1 +NEIGHBOR[1].PORT-ID: 44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION: GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME: test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION: Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES: 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +NEIGHBOR[2].DEVICE: eth0 +NEIGHBOR[2].CHASSIS-ID: 00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID: port1 +NEIGHBOR[2].PORT-DESCRIPTION: GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME: test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION: Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES: 40 (wlan-access-point,telephone) + <<< size: 5642 -location: clients/tests/test-client.py:1036:test_004()/667 +location: clients/tests/test-client.py:1036:test_004()/695 cmd: $NMCLI --mode multiline --pretty con s con-vpn-1 lang: C returncode: 0 @@ -35008,7 +35680,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 5684 -location: clients/tests/test-client.py:1036:test_004()/668 +location: clients/tests/test-client.py:1036:test_004()/696 cmd: $NMCLI --mode multiline --pretty con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -35123,7 +35795,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 5642 -location: clients/tests/test-client.py:1038:test_004()/669 +location: clients/tests/test-client.py:1038:test_004()/697 cmd: $NMCLI --mode multiline --pretty con s con-vpn-1 lang: C returncode: 0 @@ -35238,7 +35910,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 5684 -location: clients/tests/test-client.py:1038:test_004()/670 +location: clients/tests/test-client.py:1038:test_004()/698 cmd: $NMCLI --mode multiline --pretty con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -35353,7 +36025,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 4168 -location: clients/tests/test-client.py:1041:test_004()/671 +location: clients/tests/test-client.py:1041:test_004()/699 cmd: $NMCLI --mode multiline --pretty -f ALL con s con-vpn-1 lang: C returncode: 0 @@ -35443,7 +36115,7 @@ proxy.pac-script: -- <<< size: 4193 -location: clients/tests/test-client.py:1041:test_004()/672 +location: clients/tests/test-client.py:1041:test_004()/700 cmd: $NMCLI --mode multiline --pretty -f ALL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -35533,7 +36205,7 @@ proxy.pac-script: -- <<< size: 802 -location: clients/tests/test-client.py:1047:test_004()/673 +location: clients/tests/test-client.py:1047:test_004()/701 cmd: $NMCLI --mode multiline --pretty -f VPN con s con-vpn-1 lang: C returncode: 0 @@ -35552,7 +36224,7 @@ vpn.timeout: 0 <<< size: 818 -location: clients/tests/test-client.py:1047:test_004()/674 +location: clients/tests/test-client.py:1047:test_004()/702 cmd: $NMCLI --mode multiline --pretty -f VPN con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -35571,7 +36243,7 @@ vpn.timeout: 0 <<< size: 1153 -location: clients/tests/test-client.py:1050:test_004()/675 +location: clients/tests/test-client.py:1050:test_004()/703 cmd: $NMCLI --mode multiline --pretty -f GENERAL con s con-vpn-1 lang: C returncode: 0 @@ -35596,7 +36268,7 @@ GENERAL.MASTER-PATH: -- <<< size: 1173 -location: clients/tests/test-client.py:1050:test_004()/676 +location: clients/tests/test-client.py:1050:test_004()/704 cmd: $NMCLI --mode multiline --pretty -f GENERAL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -35621,7 +36293,7 @@ GENERAL.MASTER-PATH: -- <<< size: 1705 -location: clients/tests/test-client.py:1053:test_004()/677 +location: clients/tests/test-client.py:1053:test_004()/705 cmd: $NMCLI --mode multiline --pretty dev s lang: C returncode: 0 @@ -35658,7 +36330,7 @@ CONNECTION: -- <<< size: 1720 -location: clients/tests/test-client.py:1053:test_004()/678 +location: clients/tests/test-client.py:1053:test_004()/706 cmd: $NMCLI --mode multiline --pretty dev s lang: pl_PL.UTF-8 returncode: 0 @@ -35695,7 +36367,7 @@ CONNECTION: -- <<< size: 3119 -location: clients/tests/test-client.py:1056:test_004()/679 +location: clients/tests/test-client.py:1056:test_004()/707 cmd: $NMCLI --mode multiline --pretty -f all dev status lang: C returncode: 0 @@ -35757,7 +36429,7 @@ CON-PATH: -- <<< size: 3144 -location: clients/tests/test-client.py:1056:test_004()/680 +location: clients/tests/test-client.py:1056:test_004()/708 cmd: $NMCLI --mode multiline --pretty -f all dev status lang: pl_PL.UTF-8 returncode: 0 @@ -35819,7 +36491,7 @@ CON-PATH: -- <<< size: 12890 -location: clients/tests/test-client.py:1059:test_004()/681 +location: clients/tests/test-client.py:1059:test_004()/709 cmd: $NMCLI --mode multiline --pretty dev show lang: C returncode: 0 @@ -36027,7 +36699,7 @@ IP6.DOMAIN[1]: sear6.fo.x.y <<< size: 12954 -location: clients/tests/test-client.py:1059:test_004()/682 +location: clients/tests/test-client.py:1059:test_004()/710 cmd: $NMCLI --mode multiline --pretty dev show lang: pl_PL.UTF-8 returncode: 0 @@ -36235,7 +36907,7 @@ IP6.DOMAIN[1]: sear6.fo.x.y <<< size: 25262 -location: clients/tests/test-client.py:1062:test_004()/683 +location: clients/tests/test-client.py:1062:test_004()/711 cmd: $NMCLI --mode multiline --pretty -f all dev show lang: C returncode: 0 @@ -36683,7 +37355,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 25445 -location: clients/tests/test-client.py:1062:test_004()/684 +location: clients/tests/test-client.py:1062:test_004()/712 cmd: $NMCLI --mode multiline --pretty -f all dev show lang: pl_PL.UTF-8 returncode: 0 @@ -37131,7 +37803,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 2456 -location: clients/tests/test-client.py:1065:test_004()/685 +location: clients/tests/test-client.py:1065:test_004()/713 cmd: $NMCLI --mode multiline --pretty dev show wlan0 lang: C returncode: 0 @@ -37176,7 +37848,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 2474 -location: clients/tests/test-client.py:1065:test_004()/686 +location: clients/tests/test-client.py:1065:test_004()/714 cmd: $NMCLI --mode multiline --pretty dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -37221,7 +37893,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 5965 -location: clients/tests/test-client.py:1068:test_004()/687 +location: clients/tests/test-client.py:1068:test_004()/715 cmd: $NMCLI --mode multiline --pretty -f all dev show wlan0 lang: C returncode: 0 @@ -37335,7 +38007,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 6027 -location: clients/tests/test-client.py:1068:test_004()/688 +location: clients/tests/test-client.py:1068:test_004()/716 cmd: $NMCLI --mode multiline --pretty -f all dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -37449,7 +38121,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 2438 -location: clients/tests/test-client.py:1071:test_004()/689 +location: clients/tests/test-client.py:1071:test_004()/717 cmd: $NMCLI --mode multiline --pretty -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -37500,7 +38172,7 @@ WIFI-PROPERTIES.5GHZ: unknown <<< size: 2469 -location: clients/tests/test-client.py:1071:test_004()/690 +location: clients/tests/test-client.py:1071:test_004()/718 cmd: $NMCLI --mode multiline --pretty -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -37551,7 +38223,7 @@ WIFI-PROPERTIES.5GHZ: nieznane <<< size: 2438 -location: clients/tests/test-client.py:1074:test_004()/691 +location: clients/tests/test-client.py:1074:test_004()/719 cmd: $NMCLI --mode multiline --pretty -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -37602,7 +38274,7 @@ WIFI-PROPERTIES.5GHZ: unknown <<< size: 2469 -location: clients/tests/test-client.py:1074:test_004()/692 +location: clients/tests/test-client.py:1074:test_004()/720 cmd: $NMCLI --mode multiline --pretty -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -37653,7 +38325,7 @@ WIFI-PROPERTIES.5GHZ: nieznane <<< size: 1656 -location: clients/tests/test-client.py:1077:test_004()/693 +location: clients/tests/test-client.py:1077:test_004()/721 cmd: $NMCLI --mode multiline --pretty -f DEVICE,TYPE,DBUS-PATH dev lang: C returncode: 0 @@ -37685,7 +38357,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Devices/ <<< size: 1666 -location: clients/tests/test-client.py:1077:test_004()/694 +location: clients/tests/test-client.py:1077:test_004()/722 cmd: $NMCLI --mode multiline --pretty -f DEVICE,TYPE,DBUS-PATH dev lang: pl_PL.UTF-8 returncode: 0 @@ -37717,7 +38389,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Devices/ <<< size: 4761 -location: clients/tests/test-client.py:1080:test_004()/695 +location: clients/tests/test-client.py:1080:test_004()/723 cmd: $NMCLI --mode multiline --pretty -f ALL device wifi list lang: C returncode: 0 @@ -37809,7 +38481,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/AccessPo <<< size: 4837 -location: clients/tests/test-client.py:1080:test_004()/696 +location: clients/tests/test-client.py:1080:test_004()/724 cmd: $NMCLI --mode multiline --pretty -f ALL device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -37901,7 +38573,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/AccessPo <<< size: 2598 -location: clients/tests/test-client.py:1082:test_004()/697 +location: clients/tests/test-client.py:1082:test_004()/725 cmd: $NMCLI --mode multiline --pretty -f COMMON device wifi list lang: C returncode: 0 @@ -37957,7 +38629,7 @@ SECURITY: WPA1 WPA2 <<< size: 2662 -location: clients/tests/test-client.py:1082:test_004()/698 +location: clients/tests/test-client.py:1082:test_004()/726 cmd: $NMCLI --mode multiline --pretty -f COMMON device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -38013,7 +38685,7 @@ SECURITY: WPA1 WPA2 <<< size: 4874 -location: clients/tests/test-client.py:1085:test_004()/699 +location: clients/tests/test-client.py:1085:test_004()/727 cmd: $NMCLI --mode multiline --pretty -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: C returncode: 0 @@ -38105,7 +38777,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/AccessPo <<< size: 4950 -location: clients/tests/test-client.py:1085:test_004()/700 +location: clients/tests/test-client.py:1085:test_004()/728 cmd: $NMCLI --mode multiline --pretty -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -38197,7 +38869,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/AccessPo <<< size: 1419 -location: clients/tests/test-client.py:1087:test_004()/701 +location: clients/tests/test-client.py:1087:test_004()/729 cmd: $NMCLI --mode multiline --pretty -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -38229,7 +38901,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/AccessPo <<< size: 1447 -location: clients/tests/test-client.py:1087:test_004()/702 +location: clients/tests/test-client.py:1087:test_004()/730 cmd: $NMCLI --mode multiline --pretty -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -38261,7 +38933,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/AccessPo <<< size: 860 -location: clients/tests/test-client.py:1089:test_004()/703 +location: clients/tests/test-client.py:1089:test_004()/731 cmd: $NMCLI --mode multiline --pretty -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -38284,7 +38956,7 @@ SECURITY: WPA1 WPA2 <<< size: 885 -location: clients/tests/test-client.py:1089:test_004()/704 +location: clients/tests/test-client.py:1089:test_004()/732 cmd: $NMCLI --mode multiline --pretty -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -38307,7 +38979,7 @@ SECURITY: WPA1 WPA2 <<< size: 1532 -location: clients/tests/test-client.py:1092:test_004()/705 +location: clients/tests/test-client.py:1092:test_004()/733 cmd: $NMCLI --mode multiline --pretty -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -38339,7 +39011,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/AccessPo <<< size: 1560 -location: clients/tests/test-client.py:1092:test_004()/706 +location: clients/tests/test-client.py:1092:test_004()/734 cmd: $NMCLI --mode multiline --pretty -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -38371,7 +39043,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/AccessPo <<< size: 5968 -location: clients/tests/test-client.py:1094:test_004()/707 +location: clients/tests/test-client.py:1094:test_004()/735 cmd: $NMCLI --mode multiline --pretty -f ALL device show wlan0 lang: C returncode: 0 @@ -38485,7 +39157,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 6030 -location: clients/tests/test-client.py:1094:test_004()/708 +location: clients/tests/test-client.py:1094:test_004()/736 cmd: $NMCLI --mode multiline --pretty -f ALL device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -38599,7 +39271,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 2469 -location: clients/tests/test-client.py:1096:test_004()/709 +location: clients/tests/test-client.py:1096:test_004()/737 cmd: $NMCLI --mode multiline --pretty -f COMMON device show wlan0 lang: C returncode: 0 @@ -38644,7 +39316,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 2487 -location: clients/tests/test-client.py:1096:test_004()/710 +location: clients/tests/test-client.py:1096:test_004()/738 cmd: $NMCLI --mode multiline --pretty -f COMMON device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -38689,7 +39361,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 6106 -location: clients/tests/test-client.py:1098:test_004()/711 +location: clients/tests/test-client.py:1098:test_004()/739 cmd: $NMCLI --mode multiline --pretty -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: C returncode: 0 @@ -38803,7 +39475,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 6168 -location: clients/tests/test-client.py:1098:test_004()/712 +location: clients/tests/test-client.py:1098:test_004()/740 cmd: $NMCLI --mode multiline --pretty -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -38915,9 +39587,81 @@ CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | con-xx1 ------------------------------------------------------------------------------- +<<< +size: 1915 +location: clients/tests/test-client.py:1101:test_004()/741 +cmd: $NMCLI --mode multiline --pretty dev lldp list ifname eth0 +lang: C +returncode: 0 +stdout: 1742 bytes +>>> +=============================================================================== + Device LLDP neighbors (eth0) +=============================================================================== +NEIGHBOR[0].DEVICE: eth0 +NEIGHBOR[0].CHASSIS-ID: 00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID: Uplink port +NEIGHBOR[0].PORT-DESCRIPTION: GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME: test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION: Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES: 20 (mac-bridge,router) +------------------------------------------------------------------------------- +NEIGHBOR[1].DEVICE: eth0 +NEIGHBOR[1].CHASSIS-ID: chassis1 +NEIGHBOR[1].PORT-ID: 44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION: GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME: test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION: Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES: 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +------------------------------------------------------------------------------- +NEIGHBOR[2].DEVICE: eth0 +NEIGHBOR[2].CHASSIS-ID: 00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID: port1 +NEIGHBOR[2].PORT-DESCRIPTION: GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME: test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION: Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES: 40 (wlan-access-point,telephone) +------------------------------------------------------------------------------- + +<<< +size: 1929 +location: clients/tests/test-client.py:1101:test_004()/742 +cmd: $NMCLI --mode multiline --pretty dev lldp list ifname eth0 +lang: pl_PL.UTF-8 +returncode: 0 +stdout: 1746 bytes +>>> +=============================================================================== + Sąsiedzi LLDP urządzenia (eth0) +=============================================================================== +NEIGHBOR[0].DEVICE: eth0 +NEIGHBOR[0].CHASSIS-ID: 00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID: Uplink port +NEIGHBOR[0].PORT-DESCRIPTION: GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME: test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION: Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES: 20 (mac-bridge,router) +------------------------------------------------------------------------------- +NEIGHBOR[1].DEVICE: eth0 +NEIGHBOR[1].CHASSIS-ID: chassis1 +NEIGHBOR[1].PORT-ID: 44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION: GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME: test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION: Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES: 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +------------------------------------------------------------------------------- +NEIGHBOR[2].DEVICE: eth0 +NEIGHBOR[2].CHASSIS-ID: 00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID: port1 +NEIGHBOR[2].PORT-DESCRIPTION: GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME: test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION: Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES: 40 (wlan-access-point,telephone) +------------------------------------------------------------------------------- + <<< size: 5654 -location: clients/tests/test-client.py:1036:test_004()/713 +location: clients/tests/test-client.py:1036:test_004()/743 cmd: $NMCLI --mode multiline --pretty --color yes con s con-vpn-1 lang: C returncode: 0 @@ -39032,7 +39776,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 5696 -location: clients/tests/test-client.py:1036:test_004()/714 +location: clients/tests/test-client.py:1036:test_004()/744 cmd: $NMCLI --mode multiline --pretty --color yes con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -39147,7 +39891,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 5654 -location: clients/tests/test-client.py:1038:test_004()/715 +location: clients/tests/test-client.py:1038:test_004()/745 cmd: $NMCLI --mode multiline --pretty --color yes con s con-vpn-1 lang: C returncode: 0 @@ -39262,7 +40006,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 5696 -location: clients/tests/test-client.py:1038:test_004()/716 +location: clients/tests/test-client.py:1038:test_004()/746 cmd: $NMCLI --mode multiline --pretty --color yes con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -39377,7 +40121,7 @@ VPN.CFG[3]: key3 = val3 <<< size: 4180 -location: clients/tests/test-client.py:1041:test_004()/717 +location: clients/tests/test-client.py:1041:test_004()/747 cmd: $NMCLI --mode multiline --pretty --color yes -f ALL con s con-vpn-1 lang: C returncode: 0 @@ -39467,7 +40211,7 @@ proxy.pac-script: -- <<< size: 4205 -location: clients/tests/test-client.py:1041:test_004()/718 +location: clients/tests/test-client.py:1041:test_004()/748 cmd: $NMCLI --mode multiline --pretty --color yes -f ALL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -39557,7 +40301,7 @@ proxy.pac-script: -- <<< size: 814 -location: clients/tests/test-client.py:1047:test_004()/719 +location: clients/tests/test-client.py:1047:test_004()/749 cmd: $NMCLI --mode multiline --pretty --color yes -f VPN con s con-vpn-1 lang: C returncode: 0 @@ -39576,7 +40320,7 @@ vpn.timeout: 0 <<< size: 830 -location: clients/tests/test-client.py:1047:test_004()/720 +location: clients/tests/test-client.py:1047:test_004()/750 cmd: $NMCLI --mode multiline --pretty --color yes -f VPN con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -39595,7 +40339,7 @@ vpn.timeout: 0 <<< size: 1165 -location: clients/tests/test-client.py:1050:test_004()/721 +location: clients/tests/test-client.py:1050:test_004()/751 cmd: $NMCLI --mode multiline --pretty --color yes -f GENERAL con s con-vpn-1 lang: C returncode: 0 @@ -39620,7 +40364,7 @@ GENERAL.MASTER-PATH: -- <<< size: 1185 -location: clients/tests/test-client.py:1050:test_004()/722 +location: clients/tests/test-client.py:1050:test_004()/752 cmd: $NMCLI --mode multiline --pretty --color yes -f GENERAL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -39645,7 +40389,7 @@ GENERAL.MASTER-PATH: -- <<< size: 1877 -location: clients/tests/test-client.py:1053:test_004()/723 +location: clients/tests/test-client.py:1053:test_004()/753 cmd: $NMCLI --mode multiline --pretty --color yes dev s lang: C returncode: 0 @@ -39682,7 +40426,7 @@ CONNECTION: -- <<< size: 1892 -location: clients/tests/test-client.py:1053:test_004()/724 +location: clients/tests/test-client.py:1053:test_004()/754 cmd: $NMCLI --mode multiline --pretty --color yes dev s lang: pl_PL.UTF-8 returncode: 0 @@ -39719,7 +40463,7 @@ CONNECTION: -- <<< size: 3491 -location: clients/tests/test-client.py:1056:test_004()/725 +location: clients/tests/test-client.py:1056:test_004()/755 cmd: $NMCLI --mode multiline --pretty --color yes -f all dev status lang: C returncode: 0 @@ -39781,7 +40525,7 @@ CON-PATH: -- <<< size: 3516 -location: clients/tests/test-client.py:1056:test_004()/726 +location: clients/tests/test-client.py:1056:test_004()/756 cmd: $NMCLI --mode multiline --pretty --color yes -f all dev status lang: pl_PL.UTF-8 returncode: 0 @@ -39843,7 +40587,7 @@ CON-PATH: -- <<< size: 12902 -location: clients/tests/test-client.py:1059:test_004()/727 +location: clients/tests/test-client.py:1059:test_004()/757 cmd: $NMCLI --mode multiline --pretty --color yes dev show lang: C returncode: 0 @@ -40051,7 +40795,7 @@ IP6.DOMAIN[1]: sear6.fo.x.y <<< size: 12966 -location: clients/tests/test-client.py:1059:test_004()/728 +location: clients/tests/test-client.py:1059:test_004()/758 cmd: $NMCLI --mode multiline --pretty --color yes dev show lang: pl_PL.UTF-8 returncode: 0 @@ -40259,7 +41003,7 @@ IP6.DOMAIN[1]: sear6.fo.x.y <<< size: 25562 -location: clients/tests/test-client.py:1062:test_004()/729 +location: clients/tests/test-client.py:1062:test_004()/759 cmd: $NMCLI --mode multiline --pretty --color yes -f all dev show lang: C returncode: 0 @@ -40707,7 +41451,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 25745 -location: clients/tests/test-client.py:1062:test_004()/730 +location: clients/tests/test-client.py:1062:test_004()/760 cmd: $NMCLI --mode multiline --pretty --color yes -f all dev show lang: pl_PL.UTF-8 returncode: 0 @@ -41155,7 +41899,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 2468 -location: clients/tests/test-client.py:1065:test_004()/731 +location: clients/tests/test-client.py:1065:test_004()/761 cmd: $NMCLI --mode multiline --pretty --color yes dev show wlan0 lang: C returncode: 0 @@ -41200,7 +41944,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 2486 -location: clients/tests/test-client.py:1065:test_004()/732 +location: clients/tests/test-client.py:1065:test_004()/762 cmd: $NMCLI --mode multiline --pretty --color yes dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -41245,7 +41989,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 6193 -location: clients/tests/test-client.py:1068:test_004()/733 +location: clients/tests/test-client.py:1068:test_004()/763 cmd: $NMCLI --mode multiline --pretty --color yes -f all dev show wlan0 lang: C returncode: 0 @@ -41359,7 +42103,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 6255 -location: clients/tests/test-client.py:1068:test_004()/734 +location: clients/tests/test-client.py:1068:test_004()/764 cmd: $NMCLI --mode multiline --pretty --color yes -f all dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -41473,7 +42217,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 2450 -location: clients/tests/test-client.py:1071:test_004()/735 +location: clients/tests/test-client.py:1071:test_004()/765 cmd: $NMCLI --mode multiline --pretty --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -41524,7 +42268,7 @@ WIFI-PROPERTIES.5GHZ: unknown <<< size: 2481 -location: clients/tests/test-client.py:1071:test_004()/736 +location: clients/tests/test-client.py:1071:test_004()/766 cmd: $NMCLI --mode multiline --pretty --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -41575,7 +42319,7 @@ WIFI-PROPERTIES.5GHZ: nieznane <<< size: 2450 -location: clients/tests/test-client.py:1074:test_004()/737 +location: clients/tests/test-client.py:1074:test_004()/767 cmd: $NMCLI --mode multiline --pretty --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -41626,7 +42370,7 @@ WIFI-PROPERTIES.5GHZ: unknown <<< size: 2481 -location: clients/tests/test-client.py:1074:test_004()/738 +location: clients/tests/test-client.py:1074:test_004()/768 cmd: $NMCLI --mode multiline --pretty --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -41677,7 +42421,7 @@ WIFI-PROPERTIES.5GHZ: nieznane <<< size: 1788 -location: clients/tests/test-client.py:1077:test_004()/739 +location: clients/tests/test-client.py:1077:test_004()/769 cmd: $NMCLI --mode multiline --pretty --color yes -f DEVICE,TYPE,DBUS-PATH dev lang: C returncode: 0 @@ -41709,7 +42453,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Devi <<< size: 1798 -location: clients/tests/test-client.py:1077:test_004()/740 +location: clients/tests/test-client.py:1077:test_004()/770 cmd: $NMCLI --mode multiline --pretty --color yes -f DEVICE,TYPE,DBUS-PATH dev lang: pl_PL.UTF-8 returncode: 0 @@ -41741,7 +42485,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Devi <<< size: 5385 -location: clients/tests/test-client.py:1080:test_004()/741 +location: clients/tests/test-client.py:1080:test_004()/771 cmd: $NMCLI --mode multiline --pretty --color yes -f ALL device wifi list lang: C returncode: 0 @@ -41833,7 +42577,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Acc <<< size: 5461 -location: clients/tests/test-client.py:1080:test_004()/742 +location: clients/tests/test-client.py:1080:test_004()/772 cmd: $NMCLI --mode multiline --pretty --color yes -f ALL device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -41925,7 +42669,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Acc <<< size: 2898 -location: clients/tests/test-client.py:1082:test_004()/743 +location: clients/tests/test-client.py:1082:test_004()/773 cmd: $NMCLI --mode multiline --pretty --color yes -f COMMON device wifi list lang: C returncode: 0 @@ -41981,7 +42725,7 @@ SECURITY: WPA1 WPA2 <<< size: 2962 -location: clients/tests/test-client.py:1082:test_004()/744 +location: clients/tests/test-client.py:1082:test_004()/774 cmd: $NMCLI --mode multiline --pretty --color yes -f COMMON device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -42037,7 +42781,7 @@ SECURITY: WPA1 WPA2 <<< size: 5498 -location: clients/tests/test-client.py:1085:test_004()/745 +location: clients/tests/test-client.py:1085:test_004()/775 cmd: $NMCLI --mode multiline --pretty --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: C returncode: 0 @@ -42129,7 +42873,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Acc <<< size: 5574 -location: clients/tests/test-client.py:1085:test_004()/746 +location: clients/tests/test-client.py:1085:test_004()/776 cmd: $NMCLI --mode multiline --pretty --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -42221,7 +42965,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Acc <<< size: 1584 -location: clients/tests/test-client.py:1087:test_004()/747 +location: clients/tests/test-client.py:1087:test_004()/777 cmd: $NMCLI --mode multiline --pretty --color yes -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -42253,7 +42997,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Acc <<< size: 1612 -location: clients/tests/test-client.py:1087:test_004()/748 +location: clients/tests/test-client.py:1087:test_004()/778 cmd: $NMCLI --mode multiline --pretty --color yes -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -42285,7 +43029,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Acc <<< size: 944 -location: clients/tests/test-client.py:1089:test_004()/749 +location: clients/tests/test-client.py:1089:test_004()/779 cmd: $NMCLI --mode multiline --pretty --color yes -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -42308,7 +43052,7 @@ SECURITY: WPA1 WPA2 <<< size: 969 -location: clients/tests/test-client.py:1089:test_004()/750 +location: clients/tests/test-client.py:1089:test_004()/780 cmd: $NMCLI --mode multiline --pretty --color yes -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -42331,7 +43075,7 @@ SECURITY: WPA1 WPA2 <<< size: 1697 -location: clients/tests/test-client.py:1092:test_004()/751 +location: clients/tests/test-client.py:1092:test_004()/781 cmd: $NMCLI --mode multiline --pretty --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -42363,7 +43107,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Acc <<< size: 1725 -location: clients/tests/test-client.py:1092:test_004()/752 +location: clients/tests/test-client.py:1092:test_004()/782 cmd: $NMCLI --mode multiline --pretty --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -42395,7 +43139,7 @@ DBUS-PATH: /org/freedesktop/NetworkManager/Acc <<< size: 6196 -location: clients/tests/test-client.py:1094:test_004()/753 +location: clients/tests/test-client.py:1094:test_004()/783 cmd: $NMCLI --mode multiline --pretty --color yes -f ALL device show wlan0 lang: C returncode: 0 @@ -42509,7 +43253,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 6258 -location: clients/tests/test-client.py:1094:test_004()/754 +location: clients/tests/test-client.py:1094:test_004()/784 cmd: $NMCLI --mode multiline --pretty --color yes -f ALL device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -42623,7 +43367,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 2481 -location: clients/tests/test-client.py:1096:test_004()/755 +location: clients/tests/test-client.py:1096:test_004()/785 cmd: $NMCLI --mode multiline --pretty --color yes -f COMMON device show wlan0 lang: C returncode: 0 @@ -42668,7 +43412,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 2499 -location: clients/tests/test-client.py:1096:test_004()/756 +location: clients/tests/test-client.py:1096:test_004()/786 cmd: $NMCLI --mode multiline --pretty --color yes -f COMMON device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -42713,7 +43457,7 @@ IP6.DOMAIN[6]: sear6.foo4.bar <<< size: 6334 -location: clients/tests/test-client.py:1098:test_004()/757 +location: clients/tests/test-client.py:1098:test_004()/787 cmd: $NMCLI --mode multiline --pretty --color yes -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: C returncode: 0 @@ -42827,7 +43571,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | c <<< size: 6396 -location: clients/tests/test-client.py:1098:test_004()/758 +location: clients/tests/test-client.py:1098:test_004()/788 cmd: $NMCLI --mode multiline --pretty --color yes -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -42939,9 +43683,81 @@ CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings CONNECTIONS.AVAILABLE-CONNECTIONS[1]: UUID-con-xx1-REPLACED-REPLACED-REPLA | con-xx1 ------------------------------------------------------------------------------- +<<< +size: 1927 +location: clients/tests/test-client.py:1101:test_004()/789 +cmd: $NMCLI --mode multiline --pretty --color yes dev lldp list ifname eth0 +lang: C +returncode: 0 +stdout: 1742 bytes +>>> +=============================================================================== + Device LLDP neighbors (eth0) +=============================================================================== +NEIGHBOR[0].DEVICE: eth0 +NEIGHBOR[0].CHASSIS-ID: 00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID: Uplink port +NEIGHBOR[0].PORT-DESCRIPTION: GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME: test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION: Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES: 20 (mac-bridge,router) +------------------------------------------------------------------------------- +NEIGHBOR[1].DEVICE: eth0 +NEIGHBOR[1].CHASSIS-ID: chassis1 +NEIGHBOR[1].PORT-ID: 44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION: GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME: test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION: Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES: 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +------------------------------------------------------------------------------- +NEIGHBOR[2].DEVICE: eth0 +NEIGHBOR[2].CHASSIS-ID: 00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID: port1 +NEIGHBOR[2].PORT-DESCRIPTION: GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME: test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION: Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES: 40 (wlan-access-point,telephone) +------------------------------------------------------------------------------- + +<<< +size: 1941 +location: clients/tests/test-client.py:1101:test_004()/790 +cmd: $NMCLI --mode multiline --pretty --color yes dev lldp list ifname eth0 +lang: pl_PL.UTF-8 +returncode: 0 +stdout: 1746 bytes +>>> +=============================================================================== + Sąsiedzi LLDP urządzenia (eth0) +=============================================================================== +NEIGHBOR[0].DEVICE: eth0 +NEIGHBOR[0].CHASSIS-ID: 00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID: Uplink port +NEIGHBOR[0].PORT-DESCRIPTION: GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME: test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION: Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES: 20 (mac-bridge,router) +------------------------------------------------------------------------------- +NEIGHBOR[1].DEVICE: eth0 +NEIGHBOR[1].CHASSIS-ID: chassis1 +NEIGHBOR[1].PORT-ID: 44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION: GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME: test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION: Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES: 2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +------------------------------------------------------------------------------- +NEIGHBOR[2].DEVICE: eth0 +NEIGHBOR[2].CHASSIS-ID: 00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID: port1 +NEIGHBOR[2].PORT-DESCRIPTION: GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME: test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION: Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES: 40 (wlan-access-point,telephone) +------------------------------------------------------------------------------- + <<< size: 2340 -location: clients/tests/test-client.py:1036:test_004()/759 +location: clients/tests/test-client.py:1036:test_004()/791 cmd: $NMCLI --mode multiline --terse con s con-vpn-1 lang: C returncode: 0 @@ -43043,7 +43859,7 @@ VPN.CFG[3]:key3 = val3 <<< size: 2350 -location: clients/tests/test-client.py:1036:test_004()/760 +location: clients/tests/test-client.py:1036:test_004()/792 cmd: $NMCLI --mode multiline --terse con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -43145,7 +43961,7 @@ VPN.CFG[3]:key3 = val3 <<< size: 2340 -location: clients/tests/test-client.py:1038:test_004()/761 +location: clients/tests/test-client.py:1038:test_004()/793 cmd: $NMCLI --mode multiline --terse con s con-vpn-1 lang: C returncode: 0 @@ -43247,7 +44063,7 @@ VPN.CFG[3]:key3 = val3 <<< size: 2350 -location: clients/tests/test-client.py:1038:test_004()/762 +location: clients/tests/test-client.py:1038:test_004()/794 cmd: $NMCLI --mode multiline --terse con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -43349,7 +44165,7 @@ VPN.CFG[3]:key3 = val3 <<< size: 1788 -location: clients/tests/test-client.py:1041:test_004()/763 +location: clients/tests/test-client.py:1041:test_004()/795 cmd: $NMCLI --mode multiline --terse -f ALL con s con-vpn-1 lang: C returncode: 0 @@ -43431,7 +44247,7 @@ proxy.pac-script: <<< size: 1798 -location: clients/tests/test-client.py:1041:test_004()/764 +location: clients/tests/test-client.py:1041:test_004()/796 cmd: $NMCLI --mode multiline --terse -f ALL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -43513,7 +44329,7 @@ proxy.pac-script: <<< size: 339 -location: clients/tests/test-client.py:1047:test_004()/765 +location: clients/tests/test-client.py:1047:test_004()/797 cmd: $NMCLI --mode multiline --terse -f VPN con s con-vpn-1 lang: C returncode: 0 @@ -43528,7 +44344,7 @@ vpn.timeout:0 <<< size: 349 -location: clients/tests/test-client.py:1047:test_004()/766 +location: clients/tests/test-client.py:1047:test_004()/798 cmd: $NMCLI --mode multiline --terse -f VPN con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -43543,7 +44359,7 @@ vpn.timeout:0 <<< size: 542 -location: clients/tests/test-client.py:1050:test_004()/767 +location: clients/tests/test-client.py:1050:test_004()/799 cmd: $NMCLI --mode multiline --terse -f GENERAL con s con-vpn-1 lang: C returncode: 0 @@ -43564,7 +44380,7 @@ GENERAL.MASTER-PATH: <<< size: 552 -location: clients/tests/test-client.py:1050:test_004()/768 +location: clients/tests/test-client.py:1050:test_004()/800 cmd: $NMCLI --mode multiline --terse -f GENERAL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -43585,7 +44401,7 @@ GENERAL.MASTER-PATH: <<< size: 431 -location: clients/tests/test-client.py:1053:test_004()/769 +location: clients/tests/test-client.py:1053:test_004()/801 cmd: $NMCLI --mode multiline --terse dev s lang: C returncode: 0 @@ -43614,7 +44430,7 @@ CONNECTION: <<< size: 441 -location: clients/tests/test-client.py:1053:test_004()/770 +location: clients/tests/test-client.py:1053:test_004()/802 cmd: $NMCLI --mode multiline --terse dev s lang: pl_PL.UTF-8 returncode: 0 @@ -43643,7 +44459,7 @@ CONNECTION: <<< size: 1139 -location: clients/tests/test-client.py:1056:test_004()/771 +location: clients/tests/test-client.py:1056:test_004()/803 cmd: $NMCLI --mode multiline --terse -f all dev status lang: C returncode: 0 @@ -43697,7 +44513,7 @@ CON-PATH: <<< size: 1149 -location: clients/tests/test-client.py:1056:test_004()/772 +location: clients/tests/test-client.py:1056:test_004()/804 cmd: $NMCLI --mode multiline --terse -f all dev status lang: pl_PL.UTF-8 returncode: 0 @@ -43751,7 +44567,7 @@ CON-PATH: <<< size: 4557 -location: clients/tests/test-client.py:1059:test_004()/773 +location: clients/tests/test-client.py:1059:test_004()/805 cmd: $NMCLI --mode multiline --terse dev show lang: C returncode: 0 @@ -43897,7 +44713,7 @@ IP6.DOMAIN[1]:sear6.fo.x.y <<< size: 4567 -location: clients/tests/test-client.py:1059:test_004()/774 +location: clients/tests/test-client.py:1059:test_004()/806 cmd: $NMCLI --mode multiline --terse dev show lang: pl_PL.UTF-8 returncode: 0 @@ -44043,7 +44859,7 @@ IP6.DOMAIN[1]:sear6.fo.x.y <<< size: 11944 -location: clients/tests/test-client.py:1062:test_004()/775 +location: clients/tests/test-client.py:1062:test_004()/807 cmd: $NMCLI --mode multiline --terse -f all dev show lang: C returncode: 0 @@ -44432,7 +45248,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 11990 -location: clients/tests/test-client.py:1062:test_004()/776 +location: clients/tests/test-client.py:1062:test_004()/808 cmd: $NMCLI --mode multiline --terse -f all dev show lang: pl_PL.UTF-8 returncode: 0 @@ -44821,7 +45637,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 899 -location: clients/tests/test-client.py:1065:test_004()/777 +location: clients/tests/test-client.py:1065:test_004()/809 cmd: $NMCLI --mode multiline --terse dev show wlan0 lang: C returncode: 0 @@ -44854,7 +45670,7 @@ IP6.DOMAIN[6]:sear6.foo4.bar <<< size: 909 -location: clients/tests/test-client.py:1065:test_004()/778 +location: clients/tests/test-client.py:1065:test_004()/810 cmd: $NMCLI --mode multiline --terse dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -44887,7 +45703,7 @@ IP6.DOMAIN[6]:sear6.foo4.bar <<< size: 2710 -location: clients/tests/test-client.py:1068:test_004()/779 +location: clients/tests/test-client.py:1068:test_004()/811 cmd: $NMCLI --mode multiline --terse -f all dev show wlan0 lang: C returncode: 0 @@ -44987,7 +45803,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 2747 -location: clients/tests/test-client.py:1068:test_004()/780 +location: clients/tests/test-client.py:1068:test_004()/812 cmd: $NMCLI --mode multiline --terse -f all dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -45087,7 +45903,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 1208 -location: clients/tests/test-client.py:1071:test_004()/781 +location: clients/tests/test-client.py:1071:test_004()/813 cmd: $NMCLI --mode multiline --terse -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -45132,7 +45948,7 @@ WIFI-PROPERTIES.5GHZ:unknown <<< size: 1218 -location: clients/tests/test-client.py:1071:test_004()/782 +location: clients/tests/test-client.py:1071:test_004()/814 cmd: $NMCLI --mode multiline --terse -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -45177,7 +45993,7 @@ WIFI-PROPERTIES.5GHZ:unknown <<< size: 1208 -location: clients/tests/test-client.py:1074:test_004()/783 +location: clients/tests/test-client.py:1074:test_004()/815 cmd: $NMCLI --mode multiline --terse -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -45222,7 +46038,7 @@ WIFI-PROPERTIES.5GHZ:unknown <<< size: 1218 -location: clients/tests/test-client.py:1074:test_004()/784 +location: clients/tests/test-client.py:1074:test_004()/816 cmd: $NMCLI --mode multiline --terse -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -45267,7 +46083,7 @@ WIFI-PROPERTIES.5GHZ:unknown <<< size: 555 -location: clients/tests/test-client.py:1077:test_004()/785 +location: clients/tests/test-client.py:1077:test_004()/817 cmd: $NMCLI --mode multiline --terse -f DEVICE,TYPE,DBUS-PATH dev lang: C returncode: 0 @@ -45291,7 +46107,7 @@ DBUS-PATH:/org/freedesktop/NetworkManager/Devices/5 <<< size: 565 -location: clients/tests/test-client.py:1077:test_004()/786 +location: clients/tests/test-client.py:1077:test_004()/818 cmd: $NMCLI --mode multiline --terse -f DEVICE,TYPE,DBUS-PATH dev lang: pl_PL.UTF-8 returncode: 0 @@ -45315,7 +46131,7 @@ DBUS-PATH:/org/freedesktop/NetworkManager/Devices/5 <<< size: 1552 -location: clients/tests/test-client.py:1080:test_004()/787 +location: clients/tests/test-client.py:1080:test_004()/819 cmd: $NMCLI --mode multiline --terse -f ALL device wifi list lang: C returncode: 0 @@ -45394,7 +46210,7 @@ DBUS-PATH:/org/freedesktop/NetworkManager/AccessPoint/4 <<< size: 1610 -location: clients/tests/test-client.py:1080:test_004()/788 +location: clients/tests/test-client.py:1080:test_004()/820 cmd: $NMCLI --mode multiline --terse -f ALL device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -45473,7 +46289,7 @@ DBUS-PATH:/org/freedesktop/NetworkManager/AccessPoint/4 <<< size: 552 -location: clients/tests/test-client.py:1082:test_004()/789 +location: clients/tests/test-client.py:1082:test_004()/821 cmd: $NMCLI --mode multiline --terse -f COMMON device wifi list lang: C returncode: 0 @@ -45516,7 +46332,7 @@ SECURITY:WPA1 WPA2 <<< size: 598 -location: clients/tests/test-client.py:1082:test_004()/790 +location: clients/tests/test-client.py:1082:test_004()/822 cmd: $NMCLI --mode multiline --terse -f COMMON device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -45559,7 +46375,7 @@ SECURITY:WPA1 WPA2 <<< size: 1665 -location: clients/tests/test-client.py:1085:test_004()/791 +location: clients/tests/test-client.py:1085:test_004()/823 cmd: $NMCLI --mode multiline --terse -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: C returncode: 0 @@ -45638,7 +46454,7 @@ DBUS-PATH:/org/freedesktop/NetworkManager/AccessPoint/4 <<< size: 1723 -location: clients/tests/test-client.py:1085:test_004()/792 +location: clients/tests/test-client.py:1085:test_004()/824 cmd: $NMCLI --mode multiline --terse -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -45717,7 +46533,7 @@ DBUS-PATH:/org/freedesktop/NetworkManager/AccessPoint/4 <<< size: 562 -location: clients/tests/test-client.py:1087:test_004()/793 +location: clients/tests/test-client.py:1087:test_004()/825 cmd: $NMCLI --mode multiline --terse -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -45745,7 +46561,7 @@ DBUS-PATH:/org/freedesktop/NetworkManager/AccessPoint/2 <<< size: 584 -location: clients/tests/test-client.py:1087:test_004()/794 +location: clients/tests/test-client.py:1087:test_004()/826 cmd: $NMCLI --mode multiline --terse -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -45773,7 +46589,7 @@ DBUS-PATH:/org/freedesktop/NetworkManager/AccessPoint/2 <<< size: 294 -location: clients/tests/test-client.py:1089:test_004()/795 +location: clients/tests/test-client.py:1089:test_004()/827 cmd: $NMCLI --mode multiline --terse -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -45792,7 +46608,7 @@ SECURITY:WPA1 WPA2 <<< size: 314 -location: clients/tests/test-client.py:1089:test_004()/796 +location: clients/tests/test-client.py:1089:test_004()/828 cmd: $NMCLI --mode multiline --terse -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -45811,7 +46627,7 @@ SECURITY:WPA1 WPA2 <<< size: 675 -location: clients/tests/test-client.py:1092:test_004()/797 +location: clients/tests/test-client.py:1092:test_004()/829 cmd: $NMCLI --mode multiline --terse -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -45839,7 +46655,7 @@ DBUS-PATH:/org/freedesktop/NetworkManager/AccessPoint/2 <<< size: 697 -location: clients/tests/test-client.py:1092:test_004()/798 +location: clients/tests/test-client.py:1092:test_004()/830 cmd: $NMCLI --mode multiline --terse -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -45867,7 +46683,7 @@ DBUS-PATH:/org/freedesktop/NetworkManager/AccessPoint/2 <<< size: 2713 -location: clients/tests/test-client.py:1094:test_004()/799 +location: clients/tests/test-client.py:1094:test_004()/831 cmd: $NMCLI --mode multiline --terse -f ALL device show wlan0 lang: C returncode: 0 @@ -45967,7 +46783,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 2750 -location: clients/tests/test-client.py:1094:test_004()/800 +location: clients/tests/test-client.py:1094:test_004()/832 cmd: $NMCLI --mode multiline --terse -f ALL device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -46067,7 +46883,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 912 -location: clients/tests/test-client.py:1096:test_004()/801 +location: clients/tests/test-client.py:1096:test_004()/833 cmd: $NMCLI --mode multiline --terse -f COMMON device show wlan0 lang: C returncode: 0 @@ -46100,7 +46916,7 @@ IP6.DOMAIN[6]:sear6.foo4.bar <<< size: 922 -location: clients/tests/test-client.py:1096:test_004()/802 +location: clients/tests/test-client.py:1096:test_004()/834 cmd: $NMCLI --mode multiline --terse -f COMMON device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -46133,7 +46949,7 @@ IP6.DOMAIN[6]:sear6.foo4.bar <<< size: 2851 -location: clients/tests/test-client.py:1098:test_004()/803 +location: clients/tests/test-client.py:1098:test_004()/835 cmd: $NMCLI --mode multiline --terse -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: C returncode: 0 @@ -46233,7 +47049,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 2888 -location: clients/tests/test-client.py:1098:test_004()/804 +location: clients/tests/test-client.py:1098:test_004()/836 cmd: $NMCLI --mode multiline --terse -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -46331,9 +47147,69 @@ DHCP6.OPTION[5]:dhcp-6-opt-5 = val-5 CONNECTIONS.AVAILABLE-CONNECTION-PATHS:/org/freedesktop/NetworkManager/Settings/Connection/{2} CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con-xx1 +<<< +size: 1153 +location: clients/tests/test-client.py:1101:test_004()/837 +cmd: $NMCLI --mode multiline --terse dev lldp list ifname eth0 +lang: C +returncode: 0 +stdout: 982 bytes +>>> +NEIGHBOR[0].DEVICE:eth0 +NEIGHBOR[0].CHASSIS-ID:00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID:Uplink port +NEIGHBOR[0].PORT-DESCRIPTION:GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME:test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION:Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES:20 (mac-bridge,router) +NEIGHBOR[1].DEVICE:eth0 +NEIGHBOR[1].CHASSIS-ID:chassis1 +NEIGHBOR[1].PORT-ID:44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION:GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME:test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION:Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES:2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +NEIGHBOR[2].DEVICE:eth0 +NEIGHBOR[2].CHASSIS-ID:00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID:port1 +NEIGHBOR[2].PORT-DESCRIPTION:GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME:test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION:Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES:40 (wlan-access-point,telephone) + +<<< +size: 1163 +location: clients/tests/test-client.py:1101:test_004()/838 +cmd: $NMCLI --mode multiline --terse dev lldp list ifname eth0 +lang: pl_PL.UTF-8 +returncode: 0 +stdout: 982 bytes +>>> +NEIGHBOR[0].DEVICE:eth0 +NEIGHBOR[0].CHASSIS-ID:00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID:Uplink port +NEIGHBOR[0].PORT-DESCRIPTION:GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME:test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION:Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES:20 (mac-bridge,router) +NEIGHBOR[1].DEVICE:eth0 +NEIGHBOR[1].CHASSIS-ID:chassis1 +NEIGHBOR[1].PORT-ID:44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION:GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME:test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION:Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES:2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +NEIGHBOR[2].DEVICE:eth0 +NEIGHBOR[2].CHASSIS-ID:00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID:port1 +NEIGHBOR[2].PORT-DESCRIPTION:GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME:test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION:Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES:40 (wlan-access-point,telephone) + <<< size: 2352 -location: clients/tests/test-client.py:1036:test_004()/805 +location: clients/tests/test-client.py:1036:test_004()/839 cmd: $NMCLI --mode multiline --terse --color yes con s con-vpn-1 lang: C returncode: 0 @@ -46435,7 +47311,7 @@ VPN.CFG[3]:key3 = val3 <<< size: 2362 -location: clients/tests/test-client.py:1036:test_004()/806 +location: clients/tests/test-client.py:1036:test_004()/840 cmd: $NMCLI --mode multiline --terse --color yes con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -46537,7 +47413,7 @@ VPN.CFG[3]:key3 = val3 <<< size: 2352 -location: clients/tests/test-client.py:1038:test_004()/807 +location: clients/tests/test-client.py:1038:test_004()/841 cmd: $NMCLI --mode multiline --terse --color yes con s con-vpn-1 lang: C returncode: 0 @@ -46639,7 +47515,7 @@ VPN.CFG[3]:key3 = val3 <<< size: 2362 -location: clients/tests/test-client.py:1038:test_004()/808 +location: clients/tests/test-client.py:1038:test_004()/842 cmd: $NMCLI --mode multiline --terse --color yes con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -46741,7 +47617,7 @@ VPN.CFG[3]:key3 = val3 <<< size: 1800 -location: clients/tests/test-client.py:1041:test_004()/809 +location: clients/tests/test-client.py:1041:test_004()/843 cmd: $NMCLI --mode multiline --terse --color yes -f ALL con s con-vpn-1 lang: C returncode: 0 @@ -46823,7 +47699,7 @@ proxy.pac-script: <<< size: 1810 -location: clients/tests/test-client.py:1041:test_004()/810 +location: clients/tests/test-client.py:1041:test_004()/844 cmd: $NMCLI --mode multiline --terse --color yes -f ALL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -46905,7 +47781,7 @@ proxy.pac-script: <<< size: 351 -location: clients/tests/test-client.py:1047:test_004()/811 +location: clients/tests/test-client.py:1047:test_004()/845 cmd: $NMCLI --mode multiline --terse --color yes -f VPN con s con-vpn-1 lang: C returncode: 0 @@ -46920,7 +47796,7 @@ vpn.timeout:0 <<< size: 361 -location: clients/tests/test-client.py:1047:test_004()/812 +location: clients/tests/test-client.py:1047:test_004()/846 cmd: $NMCLI --mode multiline --terse --color yes -f VPN con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -46935,7 +47811,7 @@ vpn.timeout:0 <<< size: 554 -location: clients/tests/test-client.py:1050:test_004()/813 +location: clients/tests/test-client.py:1050:test_004()/847 cmd: $NMCLI --mode multiline --terse --color yes -f GENERAL con s con-vpn-1 lang: C returncode: 0 @@ -46956,7 +47832,7 @@ GENERAL.MASTER-PATH: <<< size: 564 -location: clients/tests/test-client.py:1050:test_004()/814 +location: clients/tests/test-client.py:1050:test_004()/848 cmd: $NMCLI --mode multiline --terse --color yes -f GENERAL con s con-vpn-1 lang: pl_PL.UTF-8 returncode: 0 @@ -46977,7 +47853,7 @@ GENERAL.MASTER-PATH: <<< size: 603 -location: clients/tests/test-client.py:1053:test_004()/815 +location: clients/tests/test-client.py:1053:test_004()/849 cmd: $NMCLI --mode multiline --terse --color yes dev s lang: C returncode: 0 @@ -47006,7 +47882,7 @@ CONNECTION: <<< size: 613 -location: clients/tests/test-client.py:1053:test_004()/816 +location: clients/tests/test-client.py:1053:test_004()/850 cmd: $NMCLI --mode multiline --terse --color yes dev s lang: pl_PL.UTF-8 returncode: 0 @@ -47035,7 +47911,7 @@ CONNECTION: <<< size: 1512 -location: clients/tests/test-client.py:1056:test_004()/817 +location: clients/tests/test-client.py:1056:test_004()/851 cmd: $NMCLI --mode multiline --terse --color yes -f all dev status lang: C returncode: 0 @@ -47089,7 +47965,7 @@ CON-PATH: <<< size: 1522 -location: clients/tests/test-client.py:1056:test_004()/818 +location: clients/tests/test-client.py:1056:test_004()/852 cmd: $NMCLI --mode multiline --terse --color yes -f all dev status lang: pl_PL.UTF-8 returncode: 0 @@ -47143,7 +48019,7 @@ CON-PATH: <<< size: 4569 -location: clients/tests/test-client.py:1059:test_004()/819 +location: clients/tests/test-client.py:1059:test_004()/853 cmd: $NMCLI --mode multiline --terse --color yes dev show lang: C returncode: 0 @@ -47289,7 +48165,7 @@ IP6.DOMAIN[1]:sear6.fo.x.y <<< size: 4579 -location: clients/tests/test-client.py:1059:test_004()/820 +location: clients/tests/test-client.py:1059:test_004()/854 cmd: $NMCLI --mode multiline --terse --color yes dev show lang: pl_PL.UTF-8 returncode: 0 @@ -47435,7 +48311,7 @@ IP6.DOMAIN[1]:sear6.fo.x.y <<< size: 12244 -location: clients/tests/test-client.py:1062:test_004()/821 +location: clients/tests/test-client.py:1062:test_004()/855 cmd: $NMCLI --mode multiline --terse --color yes -f all dev show lang: C returncode: 0 @@ -47824,7 +48700,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 12290 -location: clients/tests/test-client.py:1062:test_004()/822 +location: clients/tests/test-client.py:1062:test_004()/856 cmd: $NMCLI --mode multiline --terse --color yes -f all dev show lang: pl_PL.UTF-8 returncode: 0 @@ -48213,7 +49089,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 911 -location: clients/tests/test-client.py:1065:test_004()/823 +location: clients/tests/test-client.py:1065:test_004()/857 cmd: $NMCLI --mode multiline --terse --color yes dev show wlan0 lang: C returncode: 0 @@ -48246,7 +49122,7 @@ IP6.DOMAIN[6]:sear6.foo4.bar <<< size: 921 -location: clients/tests/test-client.py:1065:test_004()/824 +location: clients/tests/test-client.py:1065:test_004()/858 cmd: $NMCLI --mode multiline --terse --color yes dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -48279,7 +49155,7 @@ IP6.DOMAIN[6]:sear6.foo4.bar <<< size: 2938 -location: clients/tests/test-client.py:1068:test_004()/825 +location: clients/tests/test-client.py:1068:test_004()/859 cmd: $NMCLI --mode multiline --terse --color yes -f all dev show wlan0 lang: C returncode: 0 @@ -48379,7 +49255,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 2975 -location: clients/tests/test-client.py:1068:test_004()/826 +location: clients/tests/test-client.py:1068:test_004()/860 cmd: $NMCLI --mode multiline --terse --color yes -f all dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -48479,7 +49355,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 1220 -location: clients/tests/test-client.py:1071:test_004()/827 +location: clients/tests/test-client.py:1071:test_004()/861 cmd: $NMCLI --mode multiline --terse --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -48524,7 +49400,7 @@ WIFI-PROPERTIES.5GHZ:unknown <<< size: 1230 -location: clients/tests/test-client.py:1071:test_004()/828 +location: clients/tests/test-client.py:1071:test_004()/862 cmd: $NMCLI --mode multiline --terse --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -48569,7 +49445,7 @@ WIFI-PROPERTIES.5GHZ:unknown <<< size: 1220 -location: clients/tests/test-client.py:1074:test_004()/829 +location: clients/tests/test-client.py:1074:test_004()/863 cmd: $NMCLI --mode multiline --terse --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: C returncode: 0 @@ -48614,7 +49490,7 @@ WIFI-PROPERTIES.5GHZ:unknown <<< size: 1230 -location: clients/tests/test-client.py:1074:test_004()/830 +location: clients/tests/test-client.py:1074:test_004()/864 cmd: $NMCLI --mode multiline --terse --color yes -f GENERAL,GENERAL.HWADDR,WIFI-PROPERTIES dev show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -48659,7 +49535,7 @@ WIFI-PROPERTIES.5GHZ:unknown <<< size: 687 -location: clients/tests/test-client.py:1077:test_004()/831 +location: clients/tests/test-client.py:1077:test_004()/865 cmd: $NMCLI --mode multiline --terse --color yes -f DEVICE,TYPE,DBUS-PATH dev lang: C returncode: 0 @@ -48683,7 +49559,7 @@ DBUS-PATH:/org/freedesktop/NetworkManager/Devices/5 <<< size: 697 -location: clients/tests/test-client.py:1077:test_004()/832 +location: clients/tests/test-client.py:1077:test_004()/866 cmd: $NMCLI --mode multiline --terse --color yes -f DEVICE,TYPE,DBUS-PATH dev lang: pl_PL.UTF-8 returncode: 0 @@ -48707,7 +49583,7 @@ DBUS-PATH:/org/freedesktop/NetworkManager/Devices/5 <<< size: 2176 -location: clients/tests/test-client.py:1080:test_004()/833 +location: clients/tests/test-client.py:1080:test_004()/867 cmd: $NMCLI --mode multiline --terse --color yes -f ALL device wifi list lang: C returncode: 0 @@ -48786,7 +49662,7 @@ DBUS-PATH:/org/freedesktop/NetworkManager/AccessPoint/4 <<< size: 2234 -location: clients/tests/test-client.py:1080:test_004()/834 +location: clients/tests/test-client.py:1080:test_004()/868 cmd: $NMCLI --mode multiline --terse --color yes -f ALL device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -48865,7 +49741,7 @@ DBUS-PATH:/org/freedesktop/NetworkManager/AccessPoint/4 <<< size: 852 -location: clients/tests/test-client.py:1082:test_004()/835 +location: clients/tests/test-client.py:1082:test_004()/869 cmd: $NMCLI --mode multiline --terse --color yes -f COMMON device wifi list lang: C returncode: 0 @@ -48908,7 +49784,7 @@ SECURITY:WPA1 WPA2 <<< size: 898 -location: clients/tests/test-client.py:1082:test_004()/836 +location: clients/tests/test-client.py:1082:test_004()/870 cmd: $NMCLI --mode multiline --terse --color yes -f COMMON device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -48951,7 +49827,7 @@ SECURITY:WPA1 WPA2 <<< size: 2289 -location: clients/tests/test-client.py:1085:test_004()/837 +location: clients/tests/test-client.py:1085:test_004()/871 cmd: $NMCLI --mode multiline --terse --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: C returncode: 0 @@ -49030,7 +49906,7 @@ DBUS-PATH:/org/freedesktop/NetworkManager/AccessPoint/4 <<< size: 2347 -location: clients/tests/test-client.py:1085:test_004()/838 +location: clients/tests/test-client.py:1085:test_004()/872 cmd: $NMCLI --mode multiline --terse --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list lang: pl_PL.UTF-8 returncode: 0 @@ -49109,7 +49985,7 @@ DBUS-PATH:/org/freedesktop/NetworkManager/AccessPoint/4 <<< size: 727 -location: clients/tests/test-client.py:1087:test_004()/839 +location: clients/tests/test-client.py:1087:test_004()/873 cmd: $NMCLI --mode multiline --terse --color yes -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -49137,7 +50013,7 @@ DBUS-PATH:/org/freedesktop/NetworkManager/AccessPoint/2 <<< size: 749 -location: clients/tests/test-client.py:1087:test_004()/840 +location: clients/tests/test-client.py:1087:test_004()/874 cmd: $NMCLI --mode multiline --terse --color yes -f ALL device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -49165,7 +50041,7 @@ DBUS-PATH:/org/freedesktop/NetworkManager/AccessPoint/2 <<< size: 379 -location: clients/tests/test-client.py:1089:test_004()/841 +location: clients/tests/test-client.py:1089:test_004()/875 cmd: $NMCLI --mode multiline --terse --color yes -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -49184,7 +50060,7 @@ SECURITY:WPA1 WPA2 <<< size: 398 -location: clients/tests/test-client.py:1089:test_004()/842 +location: clients/tests/test-client.py:1089:test_004()/876 cmd: $NMCLI --mode multiline --terse --color yes -f COMMON device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -49203,7 +50079,7 @@ SECURITY:WPA1 WPA2 <<< size: 840 -location: clients/tests/test-client.py:1092:test_004()/843 +location: clients/tests/test-client.py:1092:test_004()/877 cmd: $NMCLI --mode multiline --terse --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: C returncode: 0 @@ -49231,7 +50107,7 @@ DBUS-PATH:/org/freedesktop/NetworkManager/AccessPoint/2 <<< size: 862 -location: clients/tests/test-client.py:1092:test_004()/844 +location: clients/tests/test-client.py:1092:test_004()/878 cmd: $NMCLI --mode multiline --terse --color yes -f NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,IN-USE,DBUS-PATH device wifi list bssid C0:E2:BE:E8:EF:B6 lang: pl_PL.UTF-8 returncode: 0 @@ -49259,7 +50135,7 @@ DBUS-PATH:/org/freedesktop/NetworkManager/AccessPoint/2 <<< size: 2941 -location: clients/tests/test-client.py:1094:test_004()/845 +location: clients/tests/test-client.py:1094:test_004()/879 cmd: $NMCLI --mode multiline --terse --color yes -f ALL device show wlan0 lang: C returncode: 0 @@ -49359,7 +50235,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 2978 -location: clients/tests/test-client.py:1094:test_004()/846 +location: clients/tests/test-client.py:1094:test_004()/880 cmd: $NMCLI --mode multiline --terse --color yes -f ALL device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -49459,7 +50335,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 924 -location: clients/tests/test-client.py:1096:test_004()/847 +location: clients/tests/test-client.py:1096:test_004()/881 cmd: $NMCLI --mode multiline --terse --color yes -f COMMON device show wlan0 lang: C returncode: 0 @@ -49492,7 +50368,7 @@ IP6.DOMAIN[6]:sear6.foo4.bar <<< size: 934 -location: clients/tests/test-client.py:1096:test_004()/848 +location: clients/tests/test-client.py:1096:test_004()/882 cmd: $NMCLI --mode multiline --terse --color yes -f COMMON device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -49525,7 +50401,7 @@ IP6.DOMAIN[6]:sear6.foo4.bar <<< size: 3079 -location: clients/tests/test-client.py:1098:test_004()/849 +location: clients/tests/test-client.py:1098:test_004()/883 cmd: $NMCLI --mode multiline --terse --color yes -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: C returncode: 0 @@ -49625,7 +50501,7 @@ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con- <<< size: 3116 -location: clients/tests/test-client.py:1098:test_004()/850 +location: clients/tests/test-client.py:1098:test_004()/884 cmd: $NMCLI --mode multiline --terse --color yes -f GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS device show wlan0 lang: pl_PL.UTF-8 returncode: 0 @@ -49724,3 +50600,63 @@ CONNECTIONS.AVAILABLE-CONNECTION-PATHS:/org/freedesktop/NetworkManager/Settings/ CONNECTIONS.AVAILABLE-CONNECTIONS[1]:UUID-con-xx1-REPLACED-REPLACED-REPLA | con-xx1 <<< +size: 1165 +location: clients/tests/test-client.py:1101:test_004()/885 +cmd: $NMCLI --mode multiline --terse --color yes dev lldp list ifname eth0 +lang: C +returncode: 0 +stdout: 982 bytes +>>> +NEIGHBOR[0].DEVICE:eth0 +NEIGHBOR[0].CHASSIS-ID:00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID:Uplink port +NEIGHBOR[0].PORT-DESCRIPTION:GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME:test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION:Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES:20 (mac-bridge,router) +NEIGHBOR[1].DEVICE:eth0 +NEIGHBOR[1].CHASSIS-ID:chassis1 +NEIGHBOR[1].PORT-ID:44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION:GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME:test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION:Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES:2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +NEIGHBOR[2].DEVICE:eth0 +NEIGHBOR[2].CHASSIS-ID:00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID:port1 +NEIGHBOR[2].PORT-DESCRIPTION:GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME:test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION:Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES:40 (wlan-access-point,telephone) + +<<< +size: 1175 +location: clients/tests/test-client.py:1101:test_004()/886 +cmd: $NMCLI --mode multiline --terse --color yes dev lldp list ifname eth0 +lang: pl_PL.UTF-8 +returncode: 0 +stdout: 982 bytes +>>> +NEIGHBOR[0].DEVICE:eth0 +NEIGHBOR[0].CHASSIS-ID:00:11:22:33:44:00 +NEIGHBOR[0].PORT-ID:Uplink port +NEIGHBOR[0].PORT-DESCRIPTION:GigabitEthernet #1 +NEIGHBOR[0].SYSTEM-NAME:test1.example.com +NEIGHBOR[0].SYSTEM-DESCRIPTION:Test system #1 +NEIGHBOR[0].SYSTEM-CAPABILITIES:20 (mac-bridge,router) +NEIGHBOR[1].DEVICE:eth0 +NEIGHBOR[1].CHASSIS-ID:chassis1 +NEIGHBOR[1].PORT-ID:44:44:44:44:44:44 +NEIGHBOR[1].PORT-DESCRIPTION:GigabitEthernet #2 +NEIGHBOR[1].SYSTEM-NAME:test2.example.com +NEIGHBOR[1].SYSTEM-DESCRIPTION:Test system #2 +NEIGHBOR[1].SYSTEM-CAPABILITIES:2047 (other,repeater,mac-bridge,wlan-access-point,router,telephone,docsis-cable-device,station-only,c-vlan-component,s-vlan-component,tpmr) +NEIGHBOR[2].DEVICE:eth0 +NEIGHBOR[2].CHASSIS-ID:00:11:22:33:44:22 +NEIGHBOR[2].PORT-ID:port1 +NEIGHBOR[2].PORT-DESCRIPTION:GigabitEthernet #3 +NEIGHBOR[2].SYSTEM-NAME:test3.example.com +NEIGHBOR[2].SYSTEM-DESCRIPTION:Test system #3 +NEIGHBOR[2].SYSTEM-CAPABILITIES:40 (wlan-access-point,telephone) + +<<< diff --git a/clients/tests/test-client.py b/clients/tests/test-client.py index c7d5c9588..d33617a7f 100755 --- a/clients/tests/test-client.py +++ b/clients/tests/test-client.py @@ -1097,6 +1097,9 @@ class TestNmcli(NmTestBase): self.call_nmcli_l(mode + ['-f', 'GENERAL,CAPABILITIES,WIFI-PROPERTIES,AP,WIRED-PROPERTIES,WIMAX-PROPERTIES,NSP,IP4,DHCP4,IP6,DHCP6,BOND,TEAM,BRIDGE,VLAN,BLUETOOTH,CONNECTIONS', 'device', 'show', 'wlan0' ], replace_stdout = replace_stdout) + self.call_nmcli_l(mode + ['dev', 'lldp', 'list', 'ifname', 'eth0'], + replace_stdout = replace_stdout) + ############################################################################### def main(): diff --git a/tools/test-networkmanager-service.py b/tools/test-networkmanager-service.py index 2fec2e26f..323e05268 100755 --- a/tools/test-networkmanager-service.py +++ b/tools/test-networkmanager-service.py @@ -687,6 +687,7 @@ PRP_DEVICE_MANAGED = "Managed" PRP_DEVICE_AUTOCONNECT = "Autoconnect" PRP_DEVICE_DEVICE_TYPE = "DeviceType" PRP_DEVICE_AVAILABLE_CONNECTIONS = "AvailableConnections" +PRP_DEVICE_LLDP_NEIGHBORS = "LldpNeighbors" class Device(ExportedObj): @@ -719,6 +720,41 @@ class Device(ExportedObj): PRP_DEVICE_AUTOCONNECT: True, PRP_DEVICE_DEVICE_TYPE: dbus.UInt32(devtype), PRP_DEVICE_AVAILABLE_CONNECTIONS: ExportedObj.to_path_array([]), + PRP_DEVICE_LLDP_NEIGHBORS: dbus.Array([ + dbus.Dictionary({ + 'chassis-id-type': dbus.UInt32(6), + 'chassis-id': dbus.String('00:11:22:33:44:00'), + 'port-id-type': dbus.UInt32(7), + 'port-id': dbus.String('Uplink port'), + 'port-description': dbus.String('GigabitEthernet #1'), + 'system-name': dbus.String('test1.example.com'), + 'system-description': dbus.String('Test system #1'), + 'system-capabilities': dbus.UInt32(20), + 'destination': dbus.String('nearest-bridge'), + }), + dbus.Dictionary({ + 'chassis-id-type': dbus.UInt32(2), + 'chassis-id': dbus.String('chassis1'), + 'port-id-type': dbus.UInt32(3), + 'port-id': dbus.String('44:44:44:44:44:44'), + 'port-description': dbus.String('GigabitEthernet #2'), + 'system-name': dbus.String('test2.example.com'), + 'system-description': dbus.String('Test system #2'), + 'system-capabilities': dbus.UInt32(2047), + 'destination': dbus.String('nearest-non-tpmr-bridge') + }), + dbus.Dictionary({ + 'chassis-id-type': dbus.UInt32(6), + 'chassis-id': dbus.String('00:11:22:33:44:22'), + 'port-id-type': dbus.UInt32(1), + 'port-id': dbus.String('port1'), + 'port-description': dbus.String('GigabitEthernet #3'), + 'system-name': dbus.String('test3.example.com'), + 'system-description': dbus.String('Test system #3'), + 'system-capabilities': dbus.UInt32(40), + 'destination': dbus.String('nearest-customer-bridge'), + }) + ], 'a{sv}') } self.dbus_interface_add(IFACE_DEVICE, props, Device.PropertiesChanged)