This check requires additional information about the environment, that
is about the present connections in NMClient.
"nm-meta-setting-desc.c" should be independent from the libnm D-Bus
cache, hence move this code to "settings.c".
The lower layers are concerned with handling settings. They should not
be aware of how to notify about warnings. Instead, signal them via
the warn_fcn() hook.
For G_TYPE_BOOLEAN, let it get handled by the getter hook instead
of modifying system-wide behavior of glib.
Also, there are no properties of G_TYPE_CHAR. Just drop that.
Options dependant on specific commands (e.g., nmcli connection show
--active) are now allowed to be processed by the next_arg() function.
This would allow autocompletion to expand options belonging to specific
command first, and then global ones.
Note that global options ("--ask" and "--show-secrets") will be auto-completed
everywhere but only if at least a '-' is passed. Command specific ones
(--temporary, --active, --order) will be auto-completed only after the command
they belongs to but without requiring the user to pass a heading '-'.
Example:
'nmcli connection show -a'
will expand '-a' into '--active', but
'nmcli connection add -a`
will expand '-a' into '--ask' (as it is a global option)
This commit fixes also autocompletion for:
nmcli connection modify --temporary
(cherry picked from commit 6a3d77fbe6)
This happens when the connection is in "activating" state and
the connection is a master one waiting for slaves: "check_activated()"
is called by the active_connection_state_cb() and device_state_cb() callbacks.
If the device has already moved to a state >= NM_DEVICE_STATE_IP_CONFIG, the
call to active_connection_state_cb() will end calling
activate_connection_info_finish(), freeing the "info" object. The subsequent
call to device_state_cb() will result in accessing the freed "info".
Just call check_activated() once after registering the
active_connection_state() and device_state_cb() callbacks.
(cherry picked from commit 3d4d1bedda)
Options dependant on specific commands (e.g., nmcli connection show
--active) are now allowed to be processed by the next_arg() function.
This would allow autocompletion to expand options belonging to specific
command first, and then global ones.
Note that global options ("--ask" and "--show-secrets") will be auto-completed
everywhere but only if at least a '-' is passed. Command specific ones
(--temporary, --active, --order) will be auto-completed only after the command
they belongs to but without requiring the user to pass a heading '-'.
Example:
'nmcli connection show -a'
will expand '-a' into '--active', but
'nmcli connection add -a`
will expand '-a' into '--ask' (as it is a global option)
This commit fixes also autocompletion for:
nmcli connection modify --temporary
This happens when the connection is in "activating" state and
the connection is a master one waiting for slaves: "check_activated()"
is called by the active_connection_state_cb() and device_state_cb() callbacks.
If the device has already moved to a state >= NM_DEVICE_STATE_IP_CONFIG, the
call to active_connection_state_cb() will end calling
activate_connection_info_finish(), freeing the "info" object. The subsequent
call to device_state_cb() will result in accessing the freed "info".
Just call check_activated() once after registering the
active_connection_state() and device_state_cb() callbacks.
Before commit a63c4d0824 ("cli: use designated initializers for
setting NmcOutputField fields") each field had a @name and a
@name_l10n , which were equal for all properties except for wifi
IN-USE:
{"IN-USE", N_("*")}, /* 15 */
The commit removed @name_l10n so now the displayed name is equal to
the field name. But now:
$ nmcli device wifi list
Error: 'device wifi': invalid field 'IN-USE'; allowed fields:
NAME,SSID,SSID-HEX,BSSID,MODE,CHAN,FREQ,RATE,SIGNAL,BARS,SECURITY,
WPA-FLAGS,RSN-FLAGS,DEVICE,ACTIVE,*,DBUS-PATH
The new field name should be 'IN-USE' and not '*', otherwise scripts
doing "-f IN-USE" will break. As a side effect we now show 'IN-USE'
instead of '*' in the column header, which seems easier to understand:
IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY
* default Infra 5 54 Mbit/s 71 ▂▄▆_ WPA2
guest Infra 1 54 Mbit/s 62 ▂▄▆_ WPA2
Fixes: a63c4d0824
We now update the default route metric based on the result of the
connectivity check. When we update the metric and there is no other
changes to the IP configuration, NMPolicy is not notified about it and
can't update the best device until an actual change in IP config
happens. This results in a wrong best device set in NMPolicy.
NMDevice has NM_DEVICE_IP[4,6]_CONFIG_CHANGED signals that are used
exclusively by NMPolicy to detect when there is a change in
configuration that requires an update of global DNS and routing
information. Emit those signals also when the default route changes.
(cherry picked from commit 3fe144f934)
We now update the default route metric based on the result of the
connectivity check. When we update the metric and there is no other
changes to the IP configuration, NMPolicy is not notified about it and
can't update the best device until an actual change in IP config
happens. This results in a wrong best device set in NMPolicy.
NMDevice has NM_DEVICE_IP[4,6]_CONFIG_CHANGED signals that are used
exclusively by NMPolicy to detect when there is a change in
configuration that requires an update of global DNS and routing
information. Emit those signals also when the default route changes.
A larger refactoring of nmcli.
Splits out (a bit) the tracking of settings meta data. As such,
it goes towards what is proposed by bgo#732292.
Then, get rid (a bit) of the global data that is passed around.
We should not violate the global data to track the output data
while it is constructed and printed.
Most of the time, we actually clear the output data anyway --
either before constructing it, or after printing it.
In some cases we didn't, but I think that is a bug. It's really
hard to keep track of this.
The output data should belong to a certain scope and get destroyed
afterwards. Passing it around is very confusing. Don't do that.
To better understand which part of the code have side effects,
split print_data() in a part that mutilates the input array
and a part that only prints.
Don't cast const strings to non-const. And don't track
whether to free a variable in a boolean. Instead, assign
ownership to variables that get destroyed when the function
returns.
The NmCli structure is passed around everywhere and contains all
the state of the program. It is very hard to follow which parts
are used where.
Split out more configuration options to a NmcConfig field. This field
is mostly immutable, and modified at particular places that now can be
easily found.
nmc contains all options and collects output data. It is very hard to
understand what it does. Start splitting it up, and pass arguments along
-- as needed.
Otherwise, changing the structure is difficult because it all depends
on the order (and you don't immdiately see which field is used where).
Also, drop the name_l10n field.
libnm contains the public function nm_utils_enum_from_str() et al.
The function is not flexible enough for nmcli's usecase. So, I would
need another public function like nm_utils_enum_from_str_full() that
has an extended API.
That was already required previously for ifcfg-rh writer, but in that
case I could just add it as internal API as libnm-core is linked statically
with NetworkManager.
I don't want to commit to a public API for an utility function. So move
the code instead to the shared directory, so that nmcli may link
statically against it and use the internal API.
These functions are only used by nm-meta-setting-desc.c. Make them internal.
Unfortunately, they are part of "common.h" which cannot be used without
the rest of nmcli. Still todo.
This part contains static functions and variables to describe
settings. It is distinct from the mechanism to use them, or
access them.
Split it out.
It still uses clients/cli/common.h and clients/cli/utils.h
which shall be fixed next.
They will be moved out of nmcli as they are generally useful.
Even if they happen to be used only inside nmcli, there should
be a better separation between logic (nmcli) and setting decriptions.
