In practice, this should only matter when there are multiple
header files with the same name. That is something we try
to avoid already, by giving headers a distinct name.
When building NetworkManager itself, we clearly want to use
double-quotes for including our own headers.
But we also want to do that in our public headers. For example:
./a.c
#include <stdio.h>
#include <nm-1.h>
void main() {
printf ("INCLUDED %s/nm-2.h\n", SYMB);
}
./1/nm-1.h
#include <nm-2.h>
./1/nm-2.h
#define SYMB "1"
./2/nm-2.h
#define SYMB "2"
$ cc -I./2 -I./1 ./a.c
$ ./a.out
INCLUDED 2/nm-2.h
Exceptions to this are
- headers in "shared/nm-utils" that include <NetworkManager.h>. These
headers are copied into projects and hence used like headers owned by
those projects.
- examples/C
Building the man pages via xsltproc requires "docbook.xsl"
which is part of docbook.
Previously, we would build the man pages solely based on
"--enable-introspection", which checks for the presence of
xsltproc, but not docbook. This can lead to build failure
when docbook is not available, but "--enable-introspection"
is given.
Instead of adding yet another configure option to fine-tune
and say "--with-docbook --disable-gtk-doc", just simplify it.
Now, documentation (both man pages and setting docs) will be generated
with "--enable-gtk-doc" and "--enable-introspection".
If the documentation is not about to be generated, pre-generated docs
will be installed if they are available. That is commonly the case
with a source tarball, but not with a git checkout.
Finally, if documentation is nither generated nor pre-generated,
no documentation will be installed *duh*.
This removes the possibility to treat man pages separate from settings
docs. Now you either generate both, install both pre-generated, or don't
get any of them.
https://bugzilla.gnome.org/show_bug.cgi?id=778551
- `make dist` requires --enable-gtk-doc --enable-introspection --with-libnm-glib
- --enable-gtk-doc requires --enable-introspection
- --with-nmcli requires either --enable-introspection or pregenerated
settings-docs.c files from the dist tarball. It does not require
--enable-gtk-doc.
There is a bit of a problem in that --enable-introspection requires
now xsltproc. However, gobject-introspection does itself not depend
on xsltproc. So, more correct might be a special --enable-doc argument,
that combines --enable-introspection --with-xsltproc. Anyway, that
seems to make it more complicated then it already is so just implicitly
(and surprisingly?) require xsltproc with --enable-introspection.
https://bugzilla.gnome.org/show_bug.cgi?id=775003
This makes it easier to install the files with proper names.
Also, it makes the makefile rules slightly simpler.
Lastly, the documentation is now generated into docs/api, which makes it
possible to get rid of the awkward relative file names in docbook.
This speeds up the initial object tree load significantly. Also, it
reduces the object management complexity by shifting the duties to
GDBusObjectManager.
The lifetime of all NMObjects is now managed by the NMClient via the
object manager. The NMClient creates the NMObjects for GDBus objects,
triggers the initialization and serves as an object registry (replaces
the nm-cache).
The ObjectManager uses the o.fd.DBus.ObjectManager API to learn of the
object creation, removal and property changes. It takes care of the
property changes so that we don't have to and lets us always see a
consistent object state. Thus at the time we learn of a new object we
already know its properties.
The NMObject unfortunately can't be made synchronously initializable as
the NMRemoteConnection's settings are not managed with standard
o.fd.DBus Properties and ObjectManager APIs and thus are not known to
the ObjectManager. Thus most of the asynchronous object property
changing code in nm-object.c is preserved. The objects notify the
properties that reference them of their initialization in from their
init_finish() methods, thus the asynchronously created objects are not
allowed to fail creation (or the dependees would wait forever). Not a
problem -- if a connection can't get its Settings, it's either invisible
or being removed (presumably we'd learn of the removal from the object
manager soon).
The NMObjects can't be created by the object manager itself, since we
can't determine the resulting object type in proxy_type() yet (we can't
tell from the name and can't access the interface list). Therefore the
GDBusObject is coupled with a NMObject later on.
Lastly, now that all the objects are managed by the object manager, the
NMRemoteSettings and NMManager go away when the daemon is stopped. The
complexity of dealing with calls to NMClient that would require any of
the resources that these objects manage (connection or device lists,
etc.) had to be moved to NMClient. The bright side is that his allows
for removal all of the daemon presence tracking from NMObject.
nm-core-types.h and nm-types.h contain the actual definition of types
and gtk-doc won't generate a "Implemented interfaces" section if they
are not included.
https://bugzilla.gnome.org/show_bug.cgi?id=765983
Otherwise the types links would be dangling or resolved to slightly
irrelevant documentation in libnm or completely irrelevant documentation
in libnm-util.
For internal compilation we want to be able to use deprecated
API without warnings.
Define the version min/max macros to effectively disable deprecation
warnings.
However, don't do it via CFLAGS option in the makefiles, instead hack it
to "nm-default.h". After all, *every* source file that is for internal
compilation needs to include this header as first.
May use a lot of improvement (actually documenting the names and
objects that use the interfaces in question), but at least this looks a
lot better on developer.gnome.org.
Up to now, the "include" directory contained (only) header files that were
used project-wide by libs, core, clients, et al.
Since the directory now also contains a non-header file, the "include"
name is misleading. Instead of adding yet another directory that is
project-wide, with non-header-only content, rename the "include"
directory to "shared".
This shall contain type definitions, with similar use
to "nm-core-internal.h".
However, it should contain a minimal set, so that we can include this
header in other headers under "src/", without including the whole
"nm-core-internal.h" in headers.
For libnm library, "nm-dbus-interface.h" contains defines like the D-Bus
paths of NetworkManager. It is desirable to have this header usable without
having a dependency on "glib.h", for example for a QT application. For that,
commit c0852964a8 removed that dependancy.
For libnm-glib library, the analog to "nm-dbus-interface.h" is
"NetworkManager.h", and the same applies there. Commit
159e827a72 removed that include.
However, that broke build on PackageKit [1] which expected to get the
version macros by including "NetworkManager.h". So at least for libnm-glib,
we need to preserve old behavior so that a user including
"NetworkManager.h" gets the version macros, but not "glib.h".
Extract the version macros to a new header file "nm-version-macros.h".
This header doesn't include "glib.h" and can be included from
"NetworkManager.h". This gives as previous behavior and a glib-free
include.
For libnm we still don't include "nm-version-macros.h" to "nm-dbus-interface.h".
Very few users will actually need the version macros, but not using
libnm.
Users that use libnm, should just include (libnm's) "NetworkManager.h" to
get all headers.
As a special case, a user who doesn't want to use glib/libnm, but still
needs both "nm-dbus-interface.h" and "nm-version-macros.h", can include
them both separately.
[1] https://github.com/hughsie/PackageKit/issues/85
Fixes: 4545a7fe96
Add --without-libnm-glib, for people who don't want to build the
legacy client libraries. When building with this option, dbus-glib and
libdbus are not required.
After copying "nm-vpn-plugin-old.*" to "nm-vpn-service-plugin.*",
rename the class and add it to the Makefile.
This will become the new VPN Service API for libnm 1.2. No changes
done yet except renaming of the classes and functions.
Rename the previous classes NMVpnPlugin(Old) to NMVpnServicePlugin
to have a distinct name from NMVpnEditorPlugin. Buth are plugins, but
with a different use.
https://bugzilla.gnome.org/show_bug.cgi?id=749951
Add functions nm_utils_enum_to_str() and nm_utils_enum_from_str()
which can be used to perform conversions between enum values and
strings, passing the GType automatically generated for every enum by
glib-mkenums.
Even Fedora is no longer shipping the WiMAX SDK, so it's likely we'll
eventually accidentally break some of the code in src/devices/wimax/
(if we haven't already). Discussion on the list showed a consensus for
dropping support for WiMAX.
So, remove the SDK checks from configure.ac, remove the WiMAX device
plugin and associated manager support, and deprecate all the APIs.
For compatibility reasons, it is still possible to create and save
WiMAX connections, to toggle the software WiMAX rfkill state, and to
change the "WIMAX" log level, although none of these have any effect,
since no NMDeviceWimax will ever be created.
nmcli was only compiling in support for most WiMAX operations when NM
as a whole was built with WiMAX support, so that code has been removed
now as well. (It is still possible to use nmcli to create and edit
WiMAX connections, but those connections will never be activatable.)
When compiling NetworkManager with --enable-gtk-doc outside the
source tree, the generated documents are slightly different from
those generated in tree. This patch fixes that missed COPYING file in
$(top_builddir) and adds $(top_builddir)/libnm-util to DOC_SOURCE_DIR.
https://bugzilla.gnome.org/show_bug.cgi?id=742139
Signed-off-by: You-Sheng Yang <vicamo@gmail.com>
Since libnm-core secret-flags properties are now enum-typed rather
than just being uints, we can now actually recognize them when
generating docs, rather than just assuming that every property whose
name ends in '-flags', but isn't in NMSettingDcb, is a secret-flags
property.
Move the settings/plugins doc generation from libnm-util to
libnm-core, since libnm-util isn't being updated for all new
properties.
With this commit, the keyfile and ifcfg-rh documentation is basically
unchanged, except that deprecated properties are now gone, and new
properties have been added, and the sections are in a different order.
(generate-plugin-docs.pl just outputs the settings in Makefile order,
and they were unsorted in libnm-util, but are sorted in libnm-core).
The settings documentation used for nm-settings.5, the D-Bus API docs,
and the nmcli help is changed a bit more at this point, and mostly for
the worse, since the libnm-core setting properties don't match up with
the D-Bus API as well as the libnm-util ones do. To be fixed...
(I also removed the "plugins docs" line in each plugin docs comment
block while moving them, since those blocks will be used for more than
just plugins soon, and it's sort of obvious anyway.)
