We added "ipv4.route-table-sync" and "ipv6.route-table-sync" to not change
behavior for users that configured policy routing outside of NetworkManager,
for example, via a dispatcher script. Users had to explicitly opt-in
for NetworkManager to fully manage all routing tables.
These settings were awkward. Replace them with new settings "ipv4.route-table"
and "ipv6.route-table". Note that this commit breaks API/ABI on the unstable
development branch by removing recently added API.
As before, a connection will have no route-table set by default. This
has the meaning that policy-routing is not enabled and only the main table
will be fully synced. Once the user sets a table, we recognize that and
NetworkManager manages all routing tables.
The new route-table setting has other important uses: analog to
"ipv4.route-metric", it is the default that applies to all routes.
Currently it only works for static routes, not DHCP, SLAAC,
default-route, etc. That will be implemented later.
For static routes, each route still can explicitly set a table, and
overwrite the per-connection setting in "ipv4.route-table" and
"ipv6.route-table".
The new device type represents a PPP interface, and will implement the
activation of new-style PPPoE connections, i.e. the ones that don't
claim the parent device.
The agents may used this to learn that WPS PBC enrollment is active and
suggest that user pushes a button on the router instead of supplying a
network key.
It includes a reason code that makes it possible for the clients to be
more reasonable about error messages.
The reason code is essentially copied from the VPN, plus three more
reasons that were useful for non-VPN connections.
Add support for creating dummy devices. This commit adds a D-Bus
interface 'org.freedesktop.NetworkManager.Device.Dummy' which is used
primarily for determining the device type but does not carry any
properties.
Previously, due to a bug in "tools/enums-to-docbook.pl", enum values
without explicit numeric value were wrongly parsed. That is fixed,
but still explicitly set the value in the public header.
When a global checkpoint is created (one with empty device list) we
save the status of all devices to restore it later. After the
checkpoint new interfaces and connections may appear and they can
significantly influence the overall networking status, but we don't
consider them at the moment.
Introduce a new flag DELETE_NEW_CONNECTIONS to delete any connection
added after the checkpoint and similarly a DISCONNECT_NEW_DEVICES to
ensure that the connection active on newly appeared devices doesn't
disrupt network connectivity.
https://bugzilla.redhat.com/show_bug.cgi?id=1378393
GEN nm-dbus-types.xml
Documentation for value '*' missing at ../tools/enums-to-docbook.pl line 134, <> line 95.
Makefile:1579: recipe for target 'nm-dbus-types.xml' failed
Fixes: 93a753e311
The enum defines should name their numerical value explicitly,
so that it can be easily seen by looking at the code. Also,
they are public, stable API. They must not change.
Anyway, the capability 0 shall be reserved. Change NM_CAPABILITY_TEAM
to value 1.
Add statistics interface to all device instances. When active, the
properties of this interface are refreshed whenever there is network
activity for the device.
Activation is performed by changing RefreshRateMs property. If set to
zero, the interface is deactivated. If set to other value, the rest of
the interface properties are refreshed whenever the related network
metric changes, being RefreshRateMs the minimum time between property
changes, in milliseconds.
The new object type represents tunnels over IPv4 and IPv6.
We have a single setting type (NMSettingIPTunnel) for tunnels and it
can't be shared among different device factories. So we define also a
single device type for all tunnels.
This new object will also represent GRE tunnels, which before were
instantiated as NMDeviceGre and had a ".Device.Gre" D-Bus
interface. This commit introduces a change in behavior.
Add a generic NMSettingTunnel which describes properties of tunnels
over IPv4 and IPv6 (GRE, SIT, IPIP, IPIP6, IP6GRE, etc.). Since those
tunnel types all have similar properties it makes sense to have a
single setting type for them.
This adds a LldpNeighbors property to the Device D-Bus interface
carrying information about devices discovered through LLDP. The
property is an array of hashes and each hash describes the values of
LLDP TLVs for a specific neighbor.
For libnm library, "nm-dbus-interface.h" contains defines like the D-Bus
paths of NetworkManager. It is desirable to have this header usable without
having a dependency on "glib.h", for example for a QT application. For that,
commit c0852964a8 removed that dependancy.
For libnm-glib library, the analog to "nm-dbus-interface.h" is
"NetworkManager.h", and the same applies there. Commit
159e827a72 removed that include.
However, that broke build on PackageKit [1] which expected to get the
version macros by including "NetworkManager.h". So at least for libnm-glib,
we need to preserve old behavior so that a user including
"NetworkManager.h" gets the version macros, but not "glib.h".
Extract the version macros to a new header file "nm-version-macros.h".
This header doesn't include "glib.h" and can be included from
"NetworkManager.h". This gives as previous behavior and a glib-free
include.
For libnm we still don't include "nm-version-macros.h" to "nm-dbus-interface.h".
Very few users will actually need the version macros, but not using
libnm.
Users that use libnm, should just include (libnm's) "NetworkManager.h" to
get all headers.
As a special case, a user who doesn't want to use glib/libnm, but still
needs both "nm-dbus-interface.h" and "nm-version-macros.h", can include
them both separately.
[1] https://github.com/hughsie/PackageKit/issues/85
Fixes: 4545a7fe96
We want "nm-dbus-interface.h" to have no dependancy on libnm and glib.
That way, it is usable for example in the QT examples without dragging
in dependencies to glib.
Also drop all the unneccessary include to "nm-dbus-interface.h", which
we already get by directly or indirectly including "nm-core-types.h".
For existing devices, depending on the order that netlink sends interfaces to
us, the parent may be found after the VLAN interface and not be available when
the VLAN interface is constructed. Instead of failing construction, when a
NMDeviceVlan has no parent keep it unavailable for activation. Then have
the Manager notify existing devices when a new device is found, and let
NMDeviceVlan find the parent later and become available via that mechanism.
This doesn't apply to VLANs created by NM itself, because the kernel requires
a parent ifindex when creating a VLAN device. Thus this fix only applies to
VLANs created outside NetworkManager, or existing when NM starts up.
Add new capabilities CAP_FREQ_2GHZ and CAP_FREQ_5GHZ to indicate the
frequency bands supported by a Wifi device.
Add also CAP_FREQ_VALID, which is set when the values of the other 2
capabilities are available.
Original patch by Dan Williams <dcbw@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=723295
VPN connections always return true for nm_connection_need_secrets(), but the
documented behavior of GetSecrets() is just to return any secrets we have
(otherwise nmcli c --show-secrets would not be useful for VPN connections).
