* Remove 'debug' extern global from all files since we now
use syslog()
* src/NetworkManager.[ch]
- Break out routine that get the net.interface property from HAL,
removing that logic from nm_create_device_and_add_to_list()
- (nm_create_device_and_add_to_list): make this a bit more general so
it doesn't do the talking to HAL. Also add arguments to facilitate
the create of test devices.
- (nm_data_mark_state_changed): rename from nm_data_set_state_modified()
- (nm_data_new, main, nm_print_usage): add new argument "--enable-test-devices"
which makes NetworkManager listen for dbus commands to create test
devices, which have no backing hardware. Use when you're on a plane
for example, and/or forgot your wireless card at home. Test devices
_cannot_ be created unless NM is started with --enable-test-devices.
* src/NetworkManagerDbus.[ch]
- New "getLinkActive" method for devices
- New "setLinkActive" method for devices (only works on test devices)
- New "createTestDevice" method on NetworkManager object to create a test
device of a specified type (ie wired, wireless). UDI is created from
scratch, as is the interface name. Only works when NM is started with
--enable-test-devices switch.
- New "removeTestDevice" method on NetworkManager object which removes a
test device. Only works when NM is started with --enable-test-devices
* src/NetworkManagerDevice.[ch]
- Logic to facilitate test devices. Add variables to NMDevice struct to indicate
whether a device is a test device or not, and what its link status is.
- Deal with test devices in most functions. For those that work directly on hardware
special-case test devices.
- (nm_device_new): don't create a test device if test devices weren't enabled on the
command-line.
- (nm_device_update_link_active): split out logic for wired and wireless device link
checking to separate functions to facilitate test device link checking.
- (nm_device_set_enc_key): Since some drivers for wireless cards are daft and
don't make a distinction between System Authentication and Encryption
(namely Cisco aironet), we use Open System auth when setting a WEP key
on the card. We don't deal with Shared Key auth yet.
- (nm_device_activation_worker): split the activation cancel check logic out into
a separate routine nm_device_activation_cancel_if_needed()
- (nm_device_activation_signal_cancel): rename from nm_device_activation_cancel()
- (nm_device_fake_ap_list): Test wireless devices obviously cannot scan, so create
a list of fake access points that they can "see"
- (nm_device_is_test_device): return whether or not a device is a test device
* src/NetworkManagerPolicy.c
- (nm_policy_get_best_device): attempt to deal with wireless network selection,
previously if you "locked"/forced NM to use a wireless device but then
selected a wireless network for NM to use, it would switch to a wired device.
So, if the active device is wireless and it has a "forced" best AP, use it
if the "forced" best AP is still valid
- (nm_state_modification_monitor): deal with NULL best devices, for example
there were no usable network devices, or the last one was removed
* src/backends/NetworkManager*.c
- Deal with test devices, mostly just return success for operations like getting
a DHCP address
* test/nmtestdevices.c
- Test tool to create/remove/link-switch test devices
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@112 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.[ch]
- Rework menu code to add devices to menu, and to show
signal strength for each access point. Code cleanups
too.
* panel-applet/NMWirelessAppletDbus.c
- Grab network devices from NetworkManager too
- Grab quality information from NM for wireless networks
* src/NetworkManagerDbus.[ch]
- Add dbus methods for getting the HAL UDI from a device and
for getting its base quality, if its wireless
- Consolidate some functions (wireless network notifications,
device notifications)
- Add method for requesting NM to use a particular device
* src/NetworkManager.c
- Change for function consolidations from NetworkManagerDbus.c
- Implement active device locking and user-requested devices
(ie, tell NM to use a particular device instead of the one
it autochose)
* src/NetworkManagerDevice.c
- Add method for getting the base quality of a device, if its
wireless
- Grab device base quailty info from iwlib during scans
* src/NetworkManagerPolicy.c
- Use a user-requested device rather than the auto-chosen device
if we are told to
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@81 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfo.c:
- (main): clean up Seth's code style
* info-daemon/NetworkManagerInfoDbus.c:
- Use the more aptly-named path/service/interface constants from NetworkManager
- Don't return empty strings ("") as object paths ever, instead return errors
* panel-applet/NMWirelessApplet.c:
- Clean up Seth's code style
* src/NetworkManager.[ch]
- (nm_remove_device_from_list): remove anything having to do with pending_device
- (main, nm_print_usage): change --daemon=[yes|no] -> --no-daemon
* src/NetworkManagerAPList.[ch]
- Move Iter struct right above the iter functions to preserve opacity
- (nm_ap_list_remove_ap): implement
- (nm_ap_list_update_network): deal with errors returned from nm_dbus_get_network_priority(),
remove AP if NetworkManagerInfo doesn't know anything about it
- (nm_ap_list_diff): user NMAPList iterators
- (nm_ap_list_print_members): implement debugging function
* src/NetworkManagerDbus.[ch]
- (nm_dbus_nm_get_active_device): remove anything to do with pending_device
- (nm_dbus_get_user_key_for_network): remove DBusPendingCall stuff (unused),
and move the actual key setting stuff into NetworkManagerDevice.c
- (nm_dbus_get_network_priority): return -1 now on errors
- (nm_dbus_nmi_filter): fix strcmp() error that caused PreferredNetworkUpdate signals to
get lost, and force the active device to update its "best" ap when AP lists change
- (nm_dbus_nm_message_handler): Update conditions for returning "connecting" for a "status"
method call due to pending_device member removal
* src/NetworkManagerDevice.[ch]
- Move NMDevice structure to the top
- Add a wireless scan mutex and a best_ap mutex to the Wireless Options structure
- Remove Pending Action stuff from everywhere
- (nm_device_activation_*): We now "begin" activation and start a thread to do the
activation for us. This thread blocks until all conditions for activation have
been met (ie for wireless devices, we need a valid WEP key and a "best" ap), and
then setup up the interface and runs dhclient. We have to do this because there
is no guaruntee how long dhclient takes, and while we are blocking on it, we cannot
run our main loop and respond to dbus method calls or HAL device removals/inserts
- (nm_device_set_user_key_for_network): Move logic here from NetworkManagerDbus.c so we
can tell nm_device_activation_worker() that we've got a key
- (nm_device_*_best_ap): lock access to best_ap member of Wireless Options structure
- (nm_device_get_path_for_ap): dumb it down so the list doesn't lock against itself when
diffing (AP appear/disappear signal functions make sure the AP is actually in the device's
list)
- (nm_device_update_best_ap): move logic from nm_wireless_is_ap_better() here
* src/NetworkManagerPolicy.c
- Remove anything to do with pending_device
- Adjust device activation to deal with activation-in-worker-thread
* src/NetworkManagerUtils.c
- Clean up locking debugging a bit
* src/NetworkManagerWireless.[ch]
- (nm_wireless_is_ap_better): remove, stick logic in nm_device_update_best_ap(). This function
was badly named and is better as a device function
* panel-applet/.cvsignore: add
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@46 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/*
- Add panel applet
* src/NetworkManagerPolicy.c
src/NetworkManager.c
- Get access point lists from NetworkManagerInfo on-demand,
and look for ServiceCreate/ServiceDeleted signals to see when
we should query NMI for lists
* src/NetworkManagerAPList.c
- Make sure to init the list's mutex
- Convert traversals of the list over to the list iter functions
* src/NetworkManagerDbus.[ch]
- Use more aptly-named path/service/interface constants
- Treat both active and pending devices the same for "getActiveDevice"
- Add a "status" method returning "connected", "connecting", or "disconnected"
* src/NetworkManagerDevice.c
- Honor "ignored" network list when picking best ap to use
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@39 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManager.[ch]
src/NetworkManagerDbus.[ch]
src/NetworkManagerDevice.[ch]
src/NetworkManagerPolicy.c
src/NetworkManagerWireless.[ch]
- Add many more g_return_if_fail()/g_return_val_if_fail() checks
- Pass the NMData application data structure through all calls
that need it so we can get rid of nm_get_global_data()
- Change deallocation of the allowed_ap_list GSList in preparation
for not completely clearing it every time we get an update,
but instead getting incremental updates via GConf/dbus
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@20 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Makefile.am
- Add info-daemon directory
* configure.in
- Check for glade libs and headers
- Add info-daemon directory
* src/NetworkManagerAP.c
- nm_ap_new_from_ap(): Fix bug that resulted in an APs encryption status not getting
copied over to the new AP.
* src/NetworkManagerDbus.c
src/NetworkManagerDbus.h
- Deal with nm_device_ap_list_get_ap()->nm_device_ap_list_get_ap_by_index() change
- Remove nm_dbus_signal_need_key_for_network()
- Add disabled code for asynchronous user wep key callbacks
- Add functions for getting, setting, and cancelling user key operations
- Remove "setKeyForNetwork" device dbus method call, its on NetworkManager object instead
- Add "setKeyForNetwork" dbus method call on NetworkManager object
* src/NetworkManagerDevice.c
src/NetworkManagerDevice.h
- nm_device_update_link_active(): revert changes for wireless link detection, the WEP-key-is-wrong
logic is in device activation now
- nm_device_activate(): for wireless devices, if we can't associate with access point (perhaps
key is wrong) trigger get-user-key pending action
- Implement get-user-key pending action stuff, tie to dbus messages
- Rename nm_device_ap_list_get_ap() -> nm_device_ap_list_get_ap_by_index()
- Add nm_device_ap_list_get_ap_by_essid()
- Instead of copying "best" access points, ref them instead so that the key we set
sticks around
* src/NetworkManagerPolicy.c
- Deal with wrong WEP key, but right access point (and if so, return link_active = TRUE)
- Don't cancel pending actions on a device if its the same device as last iteration
- Only promote pending_device->active_device if activation was successfull
* src/Makefile.am
- Rename nmclienttest->nmtest
* info-daemon/Makefile.am
info-daemon/NetworkManagerInfo.c
info-daemon/NetworkManagerInfo.h
info-daemon/NetworkManagerInfoDbus.c
info-daemon/NetworkManagerInfoDbus.h
info-daemon/passphrase.glade
info-daemon/NetworkManagerInfo.conf
info-daemon/keyring.png
- Import sources for info-daemon, which pops up dialog for passphrase/key when
NetworkManager asks for it, and also will (soon) provide "allowed" access point
lists to NetworkManager by proxying user's GConf
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@16 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/Makefile.am
- Turn on warnings
* src/NetworkManager.c
- nm_create_device_and_add_to_list(): call nm_device_deactivate() rather
that doing the deactivation ourselves
- Cancel an pending actions on a device if its being removed
- Break up link state checking a bit, make non-active wireless cards
deactivated to save power
- Remove unused variables
* src/NetworkManager.h
- Add support for "pending" device
* src/NetworkManagerAP.h
src/NetworkManagerAP.c
- Add support for determining whether and AP has encryption enabled or not
- AP address is now "struct ether_addr" rather than a string
* src/NetworkManagerDbus.h
src/NetworkManagerDbus.c
- Add signal NeedKeyForNetwork, method SetKeyForNetwork (testing only)
- Changes for AP address from struct ether_addr->string
* src/NetworkManagerDevice.h
src/NetworkManagerDevice.c
- Remove unused variables, fix warnings
- Add support for Pending Actions (things that block a device from being "active"
until they are completed).
- First pending action: Get a WEP key from the user
- Add nm_device_is_wire[d|less](), rename nm_device_is_wireless()
- Clean up explicit testing of dev->iface_type to use nm_device_is_wireless()
- Update wireless link checking to try to determine if the AP we are associated
with is correct, but the WEP key we are using is just wrong. If its wrong,
trigger the GetUserKey pending action on the device
- If dhclient can't get an IP address, it brings the device down. Bring it back
up in that case, otherwise we can't scan or link-check on it
- Add IP address change notifications at appropriate points (still needs some work)
- Add nm_device_need_ap_switch(), checks whether we need to switch access points or not
* src/NetworkManagerPolicy.h
src/NetworkManagerPolicy.c
- Split out "best" access point determiniation into separate function
- Make device activation 2-stage: first the device is pending, then
in the next iteration through it becomes "active" unless it has
pending actions
* src/NetworkManagerUtils.h
src/NetworkManagerUtils.c
- Clean up unused variables and warnings
- Wrap our debug macros in {} to prevent possible confusion
* src/NetworkManagerWireless.c
- Forgot to return current best priority, which lead to last available AP always
being chosen no matter what its priority was. Corrected.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@15 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManager.c
- Add IPv4 address update for active device during link state check
- Don't allow wireless cards to be powered up when they are not the
active device
* src/NetworkManagerDbus.c
src/NetworkManagerDbus.h
- Add DBUS IPv4 address change signal
- Add DBUS IPv4 address get method for devices
* src/NetworkManagerDevice.c
- Make setting the WEP key actually work
- Move IP address get/set/update stuff here, per-device
- Power down/bring down wireless device when deactivated
- For scanning wireless devices, if first scan returned ENODATA, try again
* src/NetworkManagerPolicy.c
- Only set the WEP key for an allowed access point if there is one.
We were setting it to be blank if one wasn't specified.
* src/NetworkManagerUtils.h
src/NetworkManagerUtils.c
- Move the IP address stuff to NetworkManagerDevice.c
* dispatcher-daemon/NetworkManagerDispatcher.c
- Add device IPv4 address change notification stuff
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@13 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dispatcher-daemon/NetworkManagerDispatcher.c
- A bit more descriptive state message
- Don't segfault when reading directory
* src/NetworkManager.h
- Remove NMData desired_ap member, its now
per-device rather than global
* src/NetworkManager.c
- Remove references to desired_ap
- Move the allowed AP list refresh stuff into a thread
* src/NetworkManagerDevice.c
src/NetworkManagerDevice.h
- Each wireless device now has a "best ap"
- Make device activate/deactivate functions per-device
- Make wireless scanning per-device
- Add IPv4 address discover functions, stub IPv6 ones
- Move ethernet address validation functions to NetworkManagerUtils.c
- Add wireless access point accessor function
- Get/Set functions for "best ap"
* src/NetworkManagerPolicy.c
- Move activate/deactivate stuff into NetworkManagerDevice.c, per-device
- Deal with per-device "best ap" rather than data->desired_apa
- Implement allowed access point worker thread
- Add nm_policy_essid_is_allowed() function
* src/NetworkManagerUtils.c
src/NetworkManagerUtils.h
- Add nm_ethernet_address_is_valid() function
- Add IPv4/IPv6 address get functions
* src/NetworkManagerWireless.c
src/NetworkManagerWireless.h
- Move scanning stuff into NetworkManagerDevice.c, per-device
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@12 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* NetworkManager.c
- Spacing cleanups
- Flush device routes and ip addresses when added to the device list
* NetworkManagerDbus.c
- Spacing cleanups
- Add missing returns in the two signal functions
* NetworkManagerPolicy.c
- Spacing and variable cleanups
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@10 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Makefile.am
Makefile.in
configure.in
dispatcher-daemon/Makefile.am
dispatcher-daemon/Makefile.in
dispatcher-daemon/NetworkManagerDispatcher.c
Add a daemon that receives signals from NetworkManager
and will (eventually) call scripts in /etc/somewhere
when devices go up or down.
* NetworkManager.c
NetworkManagerDbus.c
Spacing cleanups.
* NetworkManagerPolicy.c
- Rename nm_policy_switch_interface->nm_policy_switch_device
- nm_policy_switch_device():
Use kill (pid) instead of system ("kill <pid>")
- nm_state_modification_monitor():
Add wireless essid to output of debug statements
Correct typo in device compare to switch or not (should be !=)
Don't sleep after sending "no longer active" signal, was useless
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@9 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
