* include/NetworkManager.h
- Remove the DOWN and CANCELLED device states
- Add UNMANAGED and UNAVAILABLE device states
- Document the device states
* introspection/nm-device.xml
src/nm-device-interface.c
src/nm-device-interface.h
- Add the 'managed' property
* test/nm-tool.c
- (detail_device): print out device state
* src/NetworkManagerSystem.h
src/backends/NetworkManagerArch.c
src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerFrugalware.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerMandriva.c
src/backends/NetworkManagerPaldo.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSlackware.c
src/backends/NetworkManagerSuSE.c
- (nm_system_device_get_system_config, nm_system_device_get_disabled
nm_system_device_free_system_config): remove; they were unused and
their functionality should be re-implemented in each distro's
system settings service plugin
* src/nm-gsm-device.c
src/nm-gsm-device.h
src/nm-cdma-device.c
src/nm-cdma-device.h
- (*_new): take the 'managed' argument
* src/nm-device.c
- (nm_device_set_address): remove, fold into nm_device_bring_up()
- (nm_device_init): start in unmanaged state, not disconnected
- (constructor): don't start device until the system settings service
has had a chance to figure out if the device is managed or not
- (nm_device_deactivate, nm_device_bring_up, nm_device_bring_down):
don't set device state here, let callers handle that as appropriate
- (nm_device_dispose): don't touch the device if it's not managed
- (set_property, get_property, nm_device_class_init): implement the
'managed' property
- (nm_device_state_changed): bring the device up if its now managed,
and deactivate it if it used to be active
- (nm_device_get_managed, nm_device_set_managed): do the right thing
with the managed state
* src/nm-hal-manager.c
- (wired_device_creator, wireless_device_creator, modem_device_creator):
take initial managed state and pass it along to device constructors
- (create_device_and_add_to_list): get managed state and pass to
type creators
* src/nm-device-802-11-wireless.c
- (real_can_activate): fold in most of
nm_device_802_11_wireless_can_activate()
- (can_scan): can't scan in UNAVAILABLE or UNMANAGED
- (link_timeout_cb): instead of deactivating, change device state and
let the device state handler to it
- (real_update_hw_address): clean up
- (state_changed_cb): when entering UNAVAILABLE state, schedule an idle
handler to transition to DISCONNECTED if the device isn't rfkilled
* src/nm-device-802-3-ethernet.c
- (set_carrier): move above callers and get rid of prototype
- (device_state_changed): when entering UNAVAILABLE state, schedule an
idle handler to transition to DISCONNECTED if the device has a
carrier
- (real_update_hw_address): clean up
- (link_timeout_cb, ppp_state_changed): change state instead of calling
deactivation directly as deactivation doesn't change state anymore
* src/NetworkManagerPolicy.c
- (schedule_activate_check): yay, remove wireless_enabled hack since
the NMManager and wireless devices work that out themselves now
- (device_state_changed): change to a switch and update for new device
states
- (device_carrier_changed): remove; device handles this now through
state changes
- (device_added): don't care about carrier any more; the initial
activation check will happen when the device transitions to
DISCONNECTED
* src/nm-manager.c
- (dispose): clear unmanaged devices
- (handle_unmanaged_devices): update unmanaged device list and toggle
the managed property on each device when needed
- (system_settings_properties_changed_cb): handle signals from the
system settings service
- (system_settings_get_unmanaged_devices_cb): handle callback from
getting the unmanaged device list method call
- (query_unmanaged_devices): ask the system settings service for its
list of unmanaged devices
- (nm_manager_name_owner_changed, initial_get_connections): get unmanaged
devices
- (manager_set_wireless_enabled): push rfkill state down to wireless
devices directly and let them handle the necessary state transitions
- (manager_device_state_changed): update for new device states
- (nm_manager_add_device): set initial rfkill state on wireless devices
- (nm_manager_remove_device): don't touch the device if it's unmanaged
- (nm_manager_activate_connection): return error if the device is
unmanaged
- (nm_manager_sleep): handle new device states correctly; don't change
the state of unavailable/unmanaged devices
* libnm-glib/nm-device-802-11-wireless.c
- (state_changed_cb): update for new device states
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3540 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-settings-system.xml
introspection/Makefile.am
- Define the unmanaged devices interface for the system settings service
* system-settings/src/nm-system-config-hal-manager.c
system-settings/src/nm-system-config-hal-manager.h
system-settings/src/nm-system-config-hal-manager-private.h
system-settings/src/Makefile.am
- Add a lightweight HAL manager object for tracking network devices for
the purpose of determining unmanaged devices and which devices need
the default DHCP connections
* system-settings/src/nm-system-config-interface.c
system-settings/src/nm-system-config-interface.h
- (nm_system_config_interface_init): add the HAL manager as an argument
- (nm_system_config_interface_get_unmanaged_devices): implement
- Define 'unmanaged-devices-changed' signal
* system-settings/src/dbus-settings.c
system-settings/src/dbus-settings.h
- Implement the unmanaged devices interface; some cleanups
* system-settings/plugins/ifcfg-suse/plugin.c
- Fixup for plugin interface changes
* system-settings/plugins/ifcfg-fedora/plugin.c
- (get_ether_device_udi): new function; find the device that has
a specified MAC address and return its UDI
- (get_udi_for_connection): new function; try to find the specific
device a connection is locked to, if any
- (device_added_cb, device_removed_cb): update unmanaged device list in
response to HAL events
- (get_unmanaged_devices): new function; return unmanaged device list
- (build_one_connection): set the connection's locked device, if any
- (write_auto_wired_connection): remove
- (kill_old_auto_wired_file): remove the ifcfg-Auto Wired file if found
- (handle_connection_changed): alert listeners that the unmanaged device
list has changed
- (init): fixup for plugin interface changes, implement unmanaged devices
* system-settings/plugins/ifcfg-fedora/parser.c
system-settings/plugins/ifcfg-fedora/parser.h
- (connection_data_free): clean up connection UDI
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3537 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Rework VPN connection handling for a more consistent D-Bus API. The
VPNManager object has been removed, and active VPN connections are now the
same as any other active connection. The Manager object's ActivateConnection
and DeactivateConnection methods are used to start and stop a VPN connection,
and the VPNConnection objects are subclasses of the ActiveConnection objects.
When activating a VPN connection, pass the path of the active connection
to which the VPN connection is tied in the 'specific_object' argument.
Consequently, the libnm-glib API has been reworked to match this arrangement,
with the VPNManager object removed, and the NMVPNConnection objects now
being subclasses of NMActiveConnection.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3504 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-manager.xml
introspection/nm-manager-client.xml
- (ActivateConnection): return the object path of the active connection
on success
- (GetActiveConnections): remove
- (DeactivateConnection): new function; deactivate a currently active
connection
- Add an ActiveConnections property which returns an array of
active connection object paths
* introspection/nm-device.xml
- (Deactivate): remove
* introspection/all.xml
- Add ActiveConnection introspection
* introspection/nm-active-connection.xml
- Add the ActiveConnection object
* include/NetworkManager.h
- Add the Connection.Active D-Bus interface
* src/nm-device-interface.c
- (impl_device_deactivate): remove
* src/nm-activation-request.c
src/nm-activation-request.c
src/Makefile.am
- Implement the Connection.Active D-Bus interface
* src/nm-manager.c
- (get_property, nm_manager_class_init): add ACTIVE_CONNECTIONS property
- (nm_manager_activate_device): return the active connection path
- (connection_added_default_handler, impl_manager_activate_connection):
return the active connection to the caller
- (add_one_connection_element, impl_manager_get_active_connections):
remove
- (impl_manager_deactivate_connection): new function; deactivate an
active connection
* libnm-glib/nm-device.c
libnm-glib/nm-device.h
- Remove Deactivate() function
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3484 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-manager.xml
introspection/nm-manager-client.xml
- Rename the ActivateDevice method to ActivateConnection to better
reflect it's usage; it's arguments get reordered a bit too
- Convert GetActiveConnections method return from a struct to a dict
* include/NetworkManager.h
- Define the dict keys for return value of GetActiveConnections
* src/nm-manager.c
- impl_manager_activate_device -> impl_manager_activate_connection
- (add_one_connection_element): return a populated hash table, not
a structure
* libnm-glib/nm-client.c
libnm-glib/nm-client.h
- nm_client_activate_device -> nm_client_activate_connection
- nm_client_free_active_connection_element -> nm_client_free_active_connections_element
- (nm_client_get_active_connections): return a GSList of GHashTables,
instead of the custom structures. Each element of the returned list
must be freed with nm_client_free_active_connections_element()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3482 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Split the 802.1x bits out of the wireless-security setting so they are
generalized enough for wired 802.1x to use too.
* introspection/nm-exported-connection.xml
- GetSecrets now returns 'a{sa{sv}}' (a hash of settings hashes) instead
of just a hash of the secrets for one setting
* libnm-util/nm-setting-wireless-security.c
libnm-util/nm-setting-wireless-security.h
- Remove 802.1x-specific stuff
- Added leap-username and leap-password properties for old-school LEAP
* src/nm-device.c
src/nm-device.h
- (connection_secrets_updated_cb): take a list of updated settings names,
not just one
* src/supplicant-manager/nm-supplicant-config.c
src/supplicant-manager/nm-supplicant-config.h
- (nm_supplicant_config_add_setting_wireless_security): remove 802.1x
specific stuff; fix for updated LEAP bits; punt 802.1x stuff
to nm_supplicant_config_add_setting_8021x()
- (nm_supplicant_config_add_setting_8021x): add an 802-1x setting to
the supplicant config
* src/nm-device-802-11-wireless.c
- (build_supplicant_config): pass in the 802.1x setting too, if any
- (real_connection_secrets_updated): take a list of updated settings
names, not just one
* src/nm-device-802-3-ethernet.c
src/nm-cdma-device.c
src/nm-gsm-device.c
- (real_connection_secrets_updated_cb): take a list of updated settings
names, not just one
* src/nm-activation-request.c
src/nm-activation-request.h
- (nm_act_request_class_init): the 'connection-secrets-updated' signal
now passes a list of updated settings names, not just one
- (update_one_setting): new function; handle one updated setting
- (get_secrets_cb): handle multiple settings returned from the
settings service; have to be careful of ordering here as there are
some dependencies between settings (ex. wireless-security and 802.1x
in some cases)
* src/marshallers/nm-marshal.list
- new marshaller for connection-secrets-updated signal
* libnm-util/nm-setting-8021x.c
- Add back the 'pin' and 'psk' settings, for EAP-SIM and EAP-PSK auth
methods
- (verify): a valid 'eap' property is now required
* libnm-util/nm-connection.c
- (register_default_settings): add priorities to settings; there are
some dependencies between settings, and during the need_secrets
calls this priority needs to be respected. For example, only the
wireless-security setting knows whether or not the connection is
going to use 802.1x or now, so it must be asked for secrets before
any existing 802.1x setting is
- (nm_connection_lookup_setting_type): expose
* libnm-util/nm-setting-wireless.c
- (verify): should verify even if all_settings is NULL; otherwise won't
catch the case where there is missing security
* libnm-util/nm-setting-wireless-security.c
- Remove everything to do with 802.1x
- Add old-school LEAP specific properties for username and password
- (need_secrets): rework LEAP secrets checking
- (verify): rework for LEAP and 802.1x verification
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3470 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Move the 'carrier' property from NMDevice to NMDevice8023Ethernet;
convert the libnm-glib NMDevice8023Ethernet to cached properties
* introspection/nm-device-802-3-ethernet.xml
- New 'Carrier' property
- New 'PropertiesChanged' signal
* introspection/nm-device.xml
- Remove 'Carrier' property
- Remove 'CarrierChanged' signal
* src/nm-device-interface.c
src/nm-device-interface.h
- (nm_device_interface_init): remove 'carrier' property and
'carrier-changed' signal
* src/nm-device.c
src/nm-device.h
- (nm_device_get_carrier, nm_device_set_carrier): remove
- (nm_device_activate_stage5_ip_config_commit): don't bother updating
the link here; wired device will handle that
- (handle_dhcp_lease_change): don't bother updating link here
- (get_property, nm_device_class_init): remove carrier property
* src/nm-device-802-11-wireless.c
- (real_update_link, nm_device_802_11_wireless_class_init): remove
real_update_link(); wireless devices don't use carrier at all
- (link_timeout_cb, supplicant_iface_state_cb_handler,
supplicant_iface_connection_state_cb_handler,
supplicant_mgr_state_cb_handler): remove anything to do with carrier
* src/nm-device-802-3-ethernet.c
src/nm-device-802-3-ethernet.h
- (nm_device_802_3_ethernet_carrier_on,
nm_device_802_3_ethernet_carrier_off, constructor): use set_carrier()
instead of nm_device_set_carrier()
- (device_state_changed): update link from sysfs on activation;
replaces real_update_link()
- (real_update_link): remove, replaced by device_state_changed()
- (nm_device_802_3_ethernet_get_carrier, set_carrier): new functions
- (nm_device_802_3_ethernet_get_speed): move up with other getters/setters
- (real_get_generic_capabilities, real_can_interrupt_activation): use
new get_carrier function
- (get_property): add 'carrier' property
- (nm_device_802_3_ethernet_class_init): add 'carrier' property and
hook into property-changed signal helper
* src/NetworkManagerPolicy.c
- (device_carrier_changed): will only ever be called with a wired device
- (device_added): only hook up to carrier-changed for wired devices
* libnm-glib/nm-device.c
libnm-glib/nm-device.h
- (constructor, nm_device_class_init): remove carrier-changed signal
- (device_carrier_changed_proxy): remove; unused
- (nm_device_get_carrier): remove; carrier a property of wired devices
* libnm-glib/nm-device-802-3-ethernet.c
libnm-glib/nm-device-802-3-ethernet.h
- Convert to cached properties like AP and Wireless objects
- (nm_device_802_3_ethernet_get_hw_address): now returns a 'const char *'
instead of a 'char *', return value should not be freed
- (nm_device_802_3_ethernet_get_carrier): return current carrier status
- (constructor): hook into properties-changed helper
- (set_property, get_property): new functions
- (nm_device_802_3_ethernet_class_init): export GObject properties
* test/nm-tool.c
- (detail_device): strdup the wired hardware address too since it's
cached now
* libnm-glib/libnm-glib-test.c
- (dump_wired): strdup the wired hardware address too since it's
cached now
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3428 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Change manager's StateChange signal to StateChanged for consistency.
* introspection/nm-manager.xml
- Add 'StateChanged' signal
- Move 'StateChange' down to the deprecated section
* src/nm-hal-manager.c
- (nm_hal_manager_new): connect to 'state-changed' instead
* src/NetworkManagerPolicy.c
- (nm_policy_new): connect to 'state-changed' instead
* src/nm-manager.c
src/nm-manager.h
- (nm_manager_update_state): emit both 'state-changed' and 'state-change'
- (nm_manager_class_init): add 'state-changed' and not the deprecation
of 'state-change'
* libnm-glib/nm-client.c
libnm-glib/nm-client.h
- (constructor, nm_client_class_init, client_state_changed_proxy):
track and proxy 'state-changed' instead of 'state-change'
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3393 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
commit 736e888c683a2b630310c5fb3119fdb0466df223
Author: Tambet Ingo <tambet@gmail.com>
Date: Fri Mar 7 10:44:36 2008 -0600
Rework ppp-manager to set up dbus service instead of doing it in pppd plugin.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3388 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Will Stephenson <wstephenson@kde.org>
* Makefile.am
configure.in
- Set up spec autogeneration infrastructure
* docs/NetworkManager DBUS API.txt
- Note how old this doc is and where to look for the canonical
D-Bus specification
* introspection/*
- Add annotations and comments
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3345 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Global rename of NMConnectionSettings -> NMExportedConnection to cut down
on confusing names
* Add 'path' and 'scope' properties to NMConnection since both NM and the
applet were having to hack this in anyway. Remove the 'path' stuff from
NMExportedConnection
* Internally rename NMConnectionType -> NMConnectionScope
* Provide default implementations of the 'get_id' and 'get_settings' methods
of NMExportedConnection
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3334 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Merge the beginnings of the new GSM card support.
* src/ppp-manager/nm-ppp-manager.c (nm_ppp_manager_stop): Remove
* the
ppp watch source before killing pppd - If this happens from
g_object_unref()
then the ppp manager is already destroyed by the time the watch
callback runs.
* src/nm-hal-manager.c: Add a device_type_name string to the
* device
creators, so that we can print a nice human readable string when
a
device is added.
* src/nm-umts-device.c (automatic_registration_get_network):
* Query
for the activated network, not much is done with the result
thought.
* src/nm-serial-device.c (nm_serial_device_get_reply):
* Implement.
(ppp_ip4_config): Change the device state to activated here for
now.
(real_check_connection): Make sure the connection includes ppp
setting.
* libnm-glib/nm-client.c (get_device): Handle umts devices.
* libnm-glib/Makefile.am: Add the new files to build.
* libnm-glib/nm-umts-device.c:
* libnm-glib/nm-umts-device.h: Implement.
2007-11-26 Tambet Ingo <tambet@gmail.com>
* src/nm-umts-device.c (automatic_registration_get_network): For
* now, dial
immediately, nm_serial_device_get_reply() isn't implemented
correctly yet.
* src/nm-serial-device.c (wait_for_reply_info_destroy): Don't
* try to remove
the timeout source - this function is only called when the
timeout source has
been removed.
(nm_serial_device_wait_for_reply): Allocate the duplicate
responses array
to be big enough to contain the terminating zero element as
well.
The timeout argument is meant to be in seconds now.
(real_deactivate_quickly): Implement.
* src/NetworkManager.conf: Allow root to own
"org.freedesktop.NetworkManager.PPP", deny it for everybody
else.
* libnm-util/nm-setting-umts.c: Network type and band properties
* are ints,
(not unsigned ints).
* libnm-util/nm-setting-serial.c (nm_setting_serial_class_init):
* Fix a
small issue with parity bounds - capital letters have lower
ascii codes
than lower case letters.
* libnm-util/nm-connection.c (register_default_settings):
* Register serial
and umts settings.
2007-11-22 Tambet Ingo <tambet@gmail.com>
Remove the "index" property from devices as not all device types
have this.
* include/NetworkManager.h (NM_DBUS_PATH_DEVICE): Remove.
* src/nm-hal-manager.c (nm_get_device_index_from_hal): Remove.
(wired_device_creator): Get the device interface from hal to
create the device.
(wireless_device_creator): Ditto.
* src/nm-device.c (nm_device_init): Remove the index member.
(constructor): Remove the checks for index property, make
interface property
a require constructor property.
Use the HAL udi for DBus path for devices.
(nm_device_get_index): Remove.
(set_property): Remove index handling.
(get_property): Ditto.
(nm_device_get_dbus_path): Remove.
* src/nm-device-interface.c (nm_device_interface_init): Remove
* the index
property.
* src/nm-device-802-3-ethernet.c
* (nm_device_802_3_ethernet_link_activated):
Access the device index through it's interface.
(nm_device_802_3_ethernet_link_deactivated): Ditto.
(nm_device_802_3_ethernet_new): Remove the useless argument
test_dev. Remove
index argument. Add interface argument.
* src/nm-device-802-11-wireless.c
* (nm_device_802_11_wireless_new): Remove
the useless test_dev argument. Remove index argument. Add
interface arugment.
* src/NetworkManagerSystem.c
* (nm_system_device_set_from_ip4_config): Get the
device index through interface.
(nm_system_set_mtu): Ditto.
* introspection/nm-device.xml: Remove the "Index" property.
2007-11-21 Tambet Ingo <tambet@gmail.com>
* src/nm-serial-device.c:
* src/nm-serial-device.c:
* src/nm-umts-device.c:
* src/nm-umts-device.h: Implement.
* src/nm-hal-manager.c (nm_get_device_driver_name):
* libhal_free_string the string
allocated by libhal.
(modem_device_creator): Implement.
(register_built_in_creators): Register the modem creator.
* src/nm-device-802-11-wireless.c
* (nm_device_802_11_wireless_new):
Remove the unused test_dev argument.
* src/nm-device-802-3-ethernet.c (nm_device_802_3_ethernet_new):
* Ditto.
* src/Makefile.am: Add new files to build.
Link in ppp-manager.
* libnm-util/nm-setting-umts.c:
* libnm-util/nm-setting-umts.h:
* libnm-util/nm-setting-serial.c:
* libnm-util/nm-setting-serial.h: Implement.
* libnm-util/Makefile.am: Add new files to build.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3116 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Helmut Schaa <hschaa@suse.de> (and more bits from me)
* src/NetworkManagerAP.c
src/NetworkManagerAP.h
libnm-glib/nm-access-point.c
libnm-glib/nm-access-point.h
- Make 'rate' property a guint32 to better match with WEXT and
wpa_supplicant and to allow representation of higher bitrates
* src/nm-device-802-11-wireless.c
introspection/nm-device-802-11-wireless.xml
libnm-glib/nm-device-802-11-wireless.c
libnm-glib/nm-device-802-11-wireless.h
- Make 'bitrate' property a guint32 to match AP 'rate' property type
* src/nm-device-802-3-ethernet.c
src/nm-device-802-3-ethernet.h
introspection/nm-device-802-3-ethernet.xml
libnm-glib/nm-device-802-3-ethernet.c
libnm-glib/nm-device-802-3-ethernet.h
- Make 'speed' property a guint32 to match other speed/rate types
- Make nm_device_802_3_ethernet_get_speed() static
* test/nm-tool.c
- Update for the changes above
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3030 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Split the GetSecrets() call off to a separate D-Bus interface so that it
can be more easily locked down with D-Bus policy. Only 'root' (ie, NM)
should be able to call GetSecrets().
* include/NetworkManager.h
- Define the connection secrets D-Bus interface
* src/vpn-manager/nm-vpn-connection.c
- (clear_need_auth): get the right proxy object for the connection
secrets interface
- (get_connection_secrets): use the connection secrets proxy; send
empty hints in get secrets request
* src/nm-activation-request.c
- (nm_act_request_request_connection_secrets): use the connection
secrets proxy; send empty hints in get secrets request
* src/nm-manager.c
src/nm-manager.h
- (connection_get_settings_cb): set the connection secrets proxy on
the connection object too
- (internal_new_connection_cb): create the connection secrets proxy
* introspection/nm-settings-connection.xml
- Define Connection.Secrets interface and move GetSecrets there
- Add a 'hints' argument to GetSecrets
* libnm-glib/nm-settings.c
libnm-glib/nm-settings.h
- (impl_connection_settings_get_secrets): add 'hints' argument
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2989 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Implement killswitch polling through HAL.
* src/nm-manager.c: Add wireless hardware status property. Add
'properties-changed' signal for changes in wireless and wireless
hardware
state changes.
* src/nm-hal-manager.c: Poll hal for killswitch statuses in
* every 6 seconds
and update NMManager's wireless hardware state when it has
changed.
(nm_hal_manager_new): Don't try to add initial devices here -
(hal_init)
already does that.
* libnm-glib/nm-client.c: Add wireless hardware status property.
* Cache the
values of wireless state and wireless hardware state. Listen for
the
'properties-changed' signals, update the cached values and emit
notify.
* include/NetworkManager.h: Fix a typo in a comment.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2975 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-device-802-11-wireless.xml
src/nm-device-802-11-wireless.h
src/nm-device-802-11-wireless.c
- Add a PropertiesChanged signal for wireless device
- Store currently associated access point
- (periodic_update): generalize; update rate here too and emit the
correct PropertiesChanged signal when stuff changes
- (real_deactivate_quickly, nm_device_802_11_wireless_dispose,
real_activation_cancel_handler): clear current_ap when device is
deactivated
- (link_to_specific_ap, get_ap_blacklisted,
nm_device_802_11_wireless_get_best_ap): remove obsolete and unused
code
- (nm_device_802_11_wireless_get_bitrate): make static; unused anywhere
outside this file
- (real_set_hw_address): emit property changed signal if the card's
MAC address changes
- (real_act_stage1_prepare): set the initial current_ap to the AP
the card is supposed to be connecting to
- (activation_success_handler): send out property updates on successful
activation
- (get_property): pull bitrate from cached value; use OBJECT_PATH type
for ACTIVE_ACCESS_POINT property because sometimes there won't be
one and dbus-glib doesn't like marshalling NULL G_TYPE_OBJECTs
- (nm_device_802_11_wireless_class_init): ACTIVE_ACCESS_POINT property
is now boxed; add PropertiesChanged signal
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2934 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Add a GetActiveConnections() method on the Manager object.
* src/nm-manager.c
src/nm-manager.h
introspection/nm-manager.xml
- (connection_get_settings_cb): keep connection type around too
- (impl_manager_get_active_connections, add_one_connection_element):
implement; returns all active connections and what devices they
apply to
* libnm-glib/nm-client.c
libnm-glib/nm-client.h
introspection/nm-manager-client.xml
- (nm_client_get_devices): GPtrArray elements are allocated and owned
by the caller; free here to avoid memory leak
- (nm_client_get_active_connections): implement; return the list of
active connections
- (nm_client_free_active_connection_element): implement; free an element
of the GSList returned by nm_client_get_active_connections()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2927 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManagerVPN.h
- define VPN connection state change reason codes
* src/vpn-manager/Makefile.am
src/vpn-manager/nm-vpn-marshal.list
src/vpn-manager/nm-vpn-marshal-main.c
- Add marshallers for StateChanged signal
* introspection/nm-vpn-connection.xml
- New Banner property
- StateChanged signal now includes a 'reason' argument
* src/vpn-manager/nm-vpn-connection.c
src/vpn-manager/nm-vpn-connection.h
- Add a "Banner" property that contains the returned VPN server login
banner (if any); valid only in the ACTIVATED state
- (nm_vpn_connection_set_state, nm_vpn_connection_disconnect): now takes
a 'reason' argument and emits that reason along with the
state-changed signal
- Fix up calls to nm_vpn_connection_set_state() to include a reason
- (nm_vpn_connection_ip4_config_get): save banner for later
- (nm_vpn_connection_get_banner, get_property,
nm_vpn_connection_class_init): implement Banner property
* src/vpn-manager/nm-vpn-service.c
- (nm_vpn_service_connections_stop): take a reason argument; copy the
connection list because elements may get added/removed from it
while iterating over the list
- (connection_state_changed): signal now includes the 'reason' argument
* libnm-glib/nm-vpn-connection.c
libnm-glib/nm-vpn-connection.h
- (nm_vpn_connection_get_banner): new function
- (state_changed_proxy): handle reason argument
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2916 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-manager.c:
* src/nm-manager.h:
Implement device activation through NMManager.
Implement "pending device activation" here - If the connection
isn't found,
we try to wait for up to 5 seconds for the connection to be
provided.
Add NMConnectionType argument to "connection-added" and
"connection-removed"
signals.
(nm_manager_get): Remove. Finally.
* src/nm-activation-request.c:
* src/nm-activation-request.h:
Remove all the deferred activation code.
* src/nm-device.c: Remove all the deferred activation code. Once
* the device
activation is started, it's started. Update the activation
virtual function
signature.
* src/nm-device-interface.c:
* src/nm-device-interface.h:
Device activation now takes only NMActRequest argument.
Don't expose device activation directly on dbus, it's supposed
to go through
NMManager now.
* src/NetworkManagerPolicy.c (nm_policy_device_change_check):
* Make the code
a bit more compact.
Use the new device activation methods through NMManager.
* introspection/nm-manager-client.xml:
* introspection/nm-manager.xml:
* libnm-glib/nm-client.c:
* libnm-glib/nm-client.h:
Add device activation method.
* libnm-glib/nm-device.c:
* libnm-glib/nm-device.h:
* introspection/nm-device.xml:
Remove device activation method. It's done through NMManager
now.
* src/vpn-manager/nm-vpn-manager.c (impl_vpn_manager_connect):
* Use the shiny
new (nm_manager_get_device_by_path) function, get rid of our own
)find_device).
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2915 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-vpn-plugin.xml
libnm-glib/nm-vpn-plugin.c
libnm-glib/nm-vpn-plugin.h
- (impl_vpn_plugin_need_secrets): implement a call that should return
the name of the NMSetting in an NMConnection that may require
secrets specific to that VPN plugin
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2892 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-vpn-plugin.c (nm_vpn_plugin_connect): Update the
* plugin activation
method.
(impl_vpn_plugin_connect): Convert properties hash to
NMConnection, activate, and
unreference the connection.
* introspection/nm-vpn-plugin.xml: Modify the 'Connect' method
* arguments: instead of
passing properties hash and routes string list, pass
NMConnection (in hashed form).
* src/vpn-manager/nm-vpn-connection.c
* (nm_vpn_connection_get_routes): Return routes
as GSList, no need to copy stuff around anymore.
(nm_vpn_connection_activate): Update the plugin activation
method.
* src/NetworkManagerSystem.c
* (nm_system_vpn_device_set_from_ip4_config): Convert
routes argument to GSList.
* vpn-daemons/vpnc/src/nm-vpnc-service.c (real_connect):
The arguments have changed, update.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2890 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Properly re-query secrets from the settings daemon when stuff fails.
* src/nm-device-802-11-wireless.c
- (ap_auth_enforced): handle static WEP correctly here by differentiating
between Shared Key and Open System auth modes
- (link_timeout_cb, supplicant_connection_timeout_cb,
real_act_stage4_ip_config_timeout): clear existing secrets and
request new ones when something fails due to a suspected wrong key
- (real_act_stage2_config): fix for new request_new argument to
nm_manager_get_connection_secrets()
* src/nm-manager.c
src/nm-manager.h
- (nm_manager_get_connection_secrets): return error status; pass
new request_new argument on to the settings daemon
* introspection/nm-settings-connection.xml
- New 'request_new' argument to the GetSecrets call that hints to the
settings daemon to ask the user for completely new secrets
* libnm-glib/nm-settings.c
libnm-glib/nm-settings.h
- (impl_connection_settings_get_secrets): handle new 'request_new'
argument
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2872 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-settings-connection.xml
libnm-glib/nm-settings.c
libnm-glib/nm-settings.h
- Make GetSecrets asynchronous on the server side
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2829 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAP.c
src/NetworkManagerAP.h
introspection/nm-access-point.xml
- Change strength-changed signal into a properties-changed signal
for all properties, not just strength. Export that signal over dbus
so listeners don't have to poll NM for changes.
- (nm_ap_export_to_dbus, nm_ap_new): not every NMAccessPoint should
get exported over D-Bus, so break up the logic and let other bits
decided when to export the AP
- (nm_ap_new_from_ap): remove, unused
* src/nm-device-802-11-wireless.c
- (merge_scanned_ap): only export APs that are actually on the device
list, not every AP created internally
* libnm-glib/nm-access-point.c
libnm-glib/nm-access-point.h
- Cache properties internally and only hit DBus when needed. Get
property updates from NM signals
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2825 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-vpn-connection.[ch]:
* src/vpn-manager/nm-vpn-manager.[ch]:
* src/vpn-manager/nm-vpn-service.[ch]: Rewrite the vpn handling
* code. Using
dbus-glib, GObjects, signals etc.
* libnm-glib/nm-vpn-manager.[ch]:
* libnm-glib/nm-vpn-connection.[ch]: Now that the NM
* implementation changed
so much, rewrite these too.
* libnm-glib/Makefile.am: Add new files to build, build new
* binding files for
the new introspection files.
* libnm-glib/nm-client.[ch]: Remove all VPN related stuff from
* here.
* libnm-glib/nm-dbus-utils.[ch]: Renamed from nm-utils.[ch] that
* was shadowing
the header with the same name from libnm-utils.
* libnm-glib/nm-vpn-plugin.[ch]: Implement.
* libnm-util/Makefile.am: Add nm-utils.[ch] to build.
* introspection/nm-vpn-plugin.xml: Implement.
* introspection/nm-vpn-connection.xml: Implement.
* introspection/nm-vpn-manager.xml: Implement.
* src/NetworkManagerSystem.c
* (nm_system_vpn_device_set_from_ip4_config): Remove
the named manager argument, it can just as easily get it as the
caller.
(nm_system_vpn_device_unset_from_ip4_config): Ditto.
* src/vpn-manager/nm-dbus-vpn.[ch]: Remove.
* src/nm-dbus-manager.h: Fix up the name_owner signal signature.
* src/dhcp-manager/nm-dhcp-manager.c (garray_to_string): Remove,
* use one from
libnm-utils.
* libnm-util/nm-connection.c: Ditto.
* src/NetworkManagerMain.h: Remove, it's finally empty.
* configure.in: Remove utils/ from build.
* include/NetworkManagerVPN.h: Add some more defines to reduce
* the amount
of hard-coded strings.
* utils/: Move it over to libnm-util.
* test/Makefile.am: Link against libnm-util now that util/ is
* gone.
* dispatcher-daemon/Makefile.am: Ditto.
* src/Makefile.am: Ditto.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2798 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAP.c
src/NetworkManagerAP.h
introspection/nm-access-point.xml
- Change 'freq' property to a guint32 instead of a double since we
weren't using the floating point bits anyway
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2780 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-device.xml
- The 'Activate' method now takes 3 arguments, a service name for the
settings service (user or system), the object path of the connection
to activate, and the specific object to activate, if any
* src/nm-device-interface.c
- (nm_device_interface_error_quark, nm_device_interface_error_get_type):
Add error bits
- (impl_device_activate): adapt to new Activate arguments; validate
the service name and get the Connection object from the NMManager
before starting to activate the device with the specified connection
* src/nm-device-802-3-ethernet.c
- (real_get_best_connection): find the best connection, or create a
default one if no existing connections can be used
* src/NetworkManagerPolicy.c
- (nm_policy_auto_get_best_device): Get the device's best connection
and only pick the device if it has one
- (nm_policy_device_change_check): disable wireless bits for now until
wireless get_best_connection() can be implemented (replacing "best_ap");
don't create a default connection here as the device subclass will do
that if needed
* src/nm-manager.h
src/nm-manager.c
- (nm_manager_get): make NMManager a singleton and expose the getter
internally
- Rework internal NMManager connection handling to use the same
routines for both the system and user settings services. Most calls
take a new NMConnectionType argument specifying either system or user
connections
- (nm_manager_get_connection_by_object_path): new function; get a
connection keyed on its object path
* src/NetworkManager.c
- (main): use nm_manager_get()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2776 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Stupid mistake on my part; object path and interface for settings service
and connection objects can be the same, only the service name must be
different for the system and user settings services.
* include/NetworkManager.h
src/nm-manager.c
introspection/nm-settings-connection.xml
introspection/nm-settings.xml
libnm-glib/nm-settings.c
- (nm_connection_settings_init, query_user_connections,
new_connection_cb): Unify NetworkManagerSettings and Connection
interface name and object path
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2772 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-access-point.xml
- Fix WpaFlags and RsnFlags property names to be what dbus-glib expects
them to be. There's some magic property name parsing going on in
dbus-glib that breaks up property names based on studly-caps and
puts - between words.
* libnm-glib/nm-access-point.c
- (nm_access_point_get_wpa_flags, nm_access_point_get_rsn_flags):
Fix property names
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2766 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-settings-connection.xml
introspection/nm-settings.xml
- Service name -> NetworkManagerUserSettings because two services
can't share part of the same path. I'm not really sure how we'll use
the same code with the system-settings daemon...
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2744 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Remove NMAPSecurity objects, they are replaced with flags on the APs for
each AP's capabilities, and by NMConnection/NMSettings objects for user
defined connections.
* include/NetworkManager.h
- Redefine 802.11 security properties. There are now device capabilities
and AP flags and AP security flags. It was way to unclear before.
* src/Makefile.am
src/nm-ap-security-leap.h
src/nm-ap-security-leap.c
src/nm-ap-security-wpa-eap.c
src/nm-ap-security-wpa-eap.h
src/nm-ap-security-private.h
src/nm-ap-security-wpa-psk.c
src/nm-ap-security-wpa-psk.h
src/nm-ap-security-wep.c
src/nm-ap-security-wep.h
src/nm-ap-security.c
src/nm-ap-security.h
- Removed, to be replaced with NMConnection/NMSettings objects
* src/nm-dbus-nmi.c
src/nm-dbus-nmi.h
- Removed, to be replaced by code that talks to the new info daemon
interface and gets NMConnection/NMSettings objects
* src/backends/NetworkManagerSuSE.c
- Remove usage of NMAPSecurity; should be replaced by a system-level
info-daemon that does the same thing but talks the new info-daemon
D-Bus interface
* src/NetworkManagerAP.h
src/NetworkManagerAP.c
src/NetworkManagerAPList.c
libnm-glib/libnm-glib-test.c
- Remove usage of NMAPSecurity objects and adjust to new flags for
WPA/RSN
* libnm-glib/nm-access-point.c
libnm-glib/nm-access-point.h
introspection/nm-access-point.xml
test/nm-tool.c
- Adjust to new flags for AP security
* utils/nm-utils.c
utils/nm-utils.h
src/vpn-manager/nm-dbus-vpn.c
- Remove D-Bus pending call stuff from nm-utils and put it in the VPN
stuff which is the only place it's used
* src/nm-device-interface.c
src/nm-device-interface.h
introspection/nm-device.xml
src/nm-activation-request.c
src/nm-activation-request.h
src/nm-device.c
- Add a new 'specific_object' argument that hints to NM what actual
AP or other device-specific thing the connection should apply to.
NMConnection objects can apply to more than one actual device/AP.
* libnm-util/nm-connection.c
* libnm-util/nm-connection.h
- Add 'have_secrets" call stubs
* libnm-util/cipher.h
- Move NM_AUTH_TYPE_* defines here for now
* src/nm-device-802-11-wireless.c
- Remove usage of NMAPSecurity, to be replaced with NMConnection/
NMSettings objects
* src/NetworkManagerDbus.c
* src/NetworkManagerPolicy.c
- Remove usage of update_allowed_networks, should be pushing data in
a different manner
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2738 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/Makefile.am: Use nm-manager-client.xml to produce
* nm-client-bindings.
* introspection/nm-manager-client.xml: Add a horrible horrbile
* hack to work around
an issue with dbus-glib bindings generator. The issue is, the
generated C caller
functions for dbus methods "Sleep(bool)" and "sleep()" both have
the same function
name and different arguments and it won't compile anymore. To
fix this, we now have
two copies of nm-manager.xml file. nm-manager.xml contains the
actual interface,
that is new API + compatibility API and used by the daemon. The
other,
nm-manager-client.xml is only the new API without compatibility
bits and is used
by libnm-glib to make it compile.
* introspection/nm-manager.xml: Define compatibility methods
* (sleep, wake, state).
* src/nm-manager.c (impl_manager_legacy_sleep)
(impl_manager_legacy_wake, impl_manager_legacy_state): Implement
the compatibility
interface functions for 0.6 branch.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2688 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
[Based on patch by Helmut Schaa <hschaa@suse.de>]
* libnm-glib/nm-client.h:
* libnm-glib/nm-object.h:
* libnm-glib/nm-vpn-connection.h:
* libnm-glib/nm-settings.h:
* libnm-glib/nm-device.h:
* libnm-glib/nm-ip4-config.h:
* libnm-glib/nm-access-point.h:
* libnm-glib/nm-device-802-3-ethernet.h:
* libnm-util/nm-setting.h:
* libnm-util/nm-connection.h: Add G_BEGIN_DECLS / G_END_DECLS to
* support C++.
* libnm-glib/nm-object.c (nm_object_get_byte_property):
* Implement.
* libnm-glib/nm-access-point.c: Strength has type char.
* gnome/vpn-properties/Makefile.am: Remove
* GNOME_DISABLE_DEPRECTATED for now
to fix build. GnomeDruid is deprecated in recent libgnomeui.
* introspection/nm-access-point.xml: Strength property is char,
* not int.
* src/NetworkManagerAP.c (set_property): Set strength from char.
(get_property): Handle hidden APs (with empty SSID).
Get strength value from char.
(nm_ap_class_init): Strength property has char type.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2659 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
