* src/nm-device.c
- (nm_device_state_changed): do deactivation and and promotion to
unavailable here, so that the device gets cleaned up before the
manager runs and starts emitting signals; do the
FAILED->DISCONNECTED transition from an idle handler rather than
immediately to guard against recursion
- (nm_device_deactivate_quickly, nm_device_dispose): stop the
FAILED->DISCONNECTED handler if it's scheduled
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3573 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c
- (state_changed_cb): clear AP list when device transitions to
unavailable or unmanaged
- (nm_device_802_11_wireless_dispose): remove redundant set_current_ap()
since this is already done in device_cleanup()
- (supplicant_iface_scanned_ap_cb): don't leak new APs when the device
isn't available or managed
- (device_cleanup): use remove_all_aps()
- (remove_all_aps): consolidate code removing all APs
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3572 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-serial-device.c
src/nm-serial-device.h
- (wait_for_reply_got_data): break input into lines, and search each
line for responses _and_ terminator strings; also make sure that
the read loop doesn't continue after the timeout is supposed to fire
- (nm_serial_device_wait_for_reply): take an array of terminators too
* src/nm-gsm-device.c
src/nm-cdma-device.c
- Send terminators to nm_serial_device_wait_for_reply()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3570 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from 陈鑫 <znscnchen@gmail.com>
* src/ppp-manager/nm-pppd-plugin.c
- (get_credentials): return correct value for success; handle case where
pppd just does some checking but doesn't want a password
- (plugin_init): make CHAP work too
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3569 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from 陈鑫 <znscnchen@gmail.com>
* src/nm-device-802-3-ethernet.c
- (real_deactivate_quickly): clear the IP interface name on
deactivation, otherwise the wrong interface might get used later
for routing and IP management
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3567 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Remove exposure of wireless-tools mode types in the API.
* include/NetworkManager.h
- Define NM80211Mode enum
* introspection/generic-types.xml
- Describe NM_802_11_MODE enum
- Remove IW_MODE_* enum
* introspection/nm-access-point.xml
libnm-glib/nm-access-point.c
libnm-glib/nm-access-point.h
- 'mode' is now of type NM80211Mode, a DBUS_TYPE_UINT
* introspection/nm-device-802-11-wireless.xml
libnm-glib/nm-device-802-11-wireless.c
libnm-glib/nm-device-802-11-wireless.h
- 'mode' is now of type NM80211Mode, a DBUS_TYPE_UINT
* libnm-util/nm-setting-wireless.c
src/NetworkManagerAP.c
src/NetworkManagerAP.h
src/nm-device-802-11-wireless.c
src/nm-device-802-11-wireless.h
test/nm-tool.c
- Use NM80211Mode not IW_MODE_*
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3562 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Enhance nm-online based on a patch from Bill Nottingham.
* test/nm-online.c
- Add a '-q' option
- Add help messages and option summary
- Add long-format options
- Add a '-x' option to exit if NM isn't running or isn't connecting
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3561 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* vpn-daemons/openvpn/auth-dialog/main.c
- Fix up for connection ID; but needs more work to actually read the
keyring key from the right place
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3554 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* system-settings/plugins/ifcfg-suse/parser.c (make_wireless_security_setting):
Make it compile again by commenting out broken code that at first didn't work and
now didn't compile either.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3550 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-object-cache.c
libnm-glib/nm-settings.c
src/dhcp-manager/nm-dhcp-manager.c
system-settings/plugins/ifcfg-fedora/plugin.c
system-settings/plugins/ifcfg-suse/plugin.c
system-settings/src/nm-system-config-hal-manager.c
libnm-util/nm-utils.c
- Remove usage of GStaticMutex since gcc-4.3 hates it and because we're
not threadsafe anyway
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3548 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* system-settings/src/main.c
- (load_stuff, device_added_cb, device_removed_cb): device added/removed
callbacks take a device type too
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3546 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
The system settings service will now create a new default DHCP connection
for wired devices that have no existing applicable connection.
* system-settings/src/nm-system-config-hal-manager.c
system-settings/src/nm-system-config-hal-manager.h
- (nm_system_config_hal_manager_get_type_for_udi): new function
* system-settings/src/dbus-settings.c
system-settings/src/dbus-settings.h
- (nm_sysconfig_settings_get_connections): new function
- (nm_sysconfig_settings_is_device_managed): new function
* system-settings/src/main.c
- (load_stuff): check for wired devices that need a default connection
- (get_details_for_udi): get interface and MAC address from HAL
- (add_default_dhcp_connection): add a default connection for a wired
device if needed
- (device_added_cb, device_removed_cb): do the right thing with
wired devices and their default connections on HAL device events
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3544 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-gsm-device.c
src/nm-cdma-device.c
- (state_changed_cb): when entering UNAVAILABLE state, schedule an idle
handler to transition to DISCONNECTED
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3542 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
- Remove the DOWN and CANCELLED device states
- Add UNMANAGED and UNAVAILABLE device states
- Document the device states
* introspection/nm-device.xml
src/nm-device-interface.c
src/nm-device-interface.h
- Add the 'managed' property
* test/nm-tool.c
- (detail_device): print out device state
* src/NetworkManagerSystem.h
src/backends/NetworkManagerArch.c
src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerFrugalware.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerMandriva.c
src/backends/NetworkManagerPaldo.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSlackware.c
src/backends/NetworkManagerSuSE.c
- (nm_system_device_get_system_config, nm_system_device_get_disabled
nm_system_device_free_system_config): remove; they were unused and
their functionality should be re-implemented in each distro's
system settings service plugin
* src/nm-gsm-device.c
src/nm-gsm-device.h
src/nm-cdma-device.c
src/nm-cdma-device.h
- (*_new): take the 'managed' argument
* src/nm-device.c
- (nm_device_set_address): remove, fold into nm_device_bring_up()
- (nm_device_init): start in unmanaged state, not disconnected
- (constructor): don't start device until the system settings service
has had a chance to figure out if the device is managed or not
- (nm_device_deactivate, nm_device_bring_up, nm_device_bring_down):
don't set device state here, let callers handle that as appropriate
- (nm_device_dispose): don't touch the device if it's not managed
- (set_property, get_property, nm_device_class_init): implement the
'managed' property
- (nm_device_state_changed): bring the device up if its now managed,
and deactivate it if it used to be active
- (nm_device_get_managed, nm_device_set_managed): do the right thing
with the managed state
* src/nm-hal-manager.c
- (wired_device_creator, wireless_device_creator, modem_device_creator):
take initial managed state and pass it along to device constructors
- (create_device_and_add_to_list): get managed state and pass to
type creators
* src/nm-device-802-11-wireless.c
- (real_can_activate): fold in most of
nm_device_802_11_wireless_can_activate()
- (can_scan): can't scan in UNAVAILABLE or UNMANAGED
- (link_timeout_cb): instead of deactivating, change device state and
let the device state handler to it
- (real_update_hw_address): clean up
- (state_changed_cb): when entering UNAVAILABLE state, schedule an idle
handler to transition to DISCONNECTED if the device isn't rfkilled
* src/nm-device-802-3-ethernet.c
- (set_carrier): move above callers and get rid of prototype
- (device_state_changed): when entering UNAVAILABLE state, schedule an
idle handler to transition to DISCONNECTED if the device has a
carrier
- (real_update_hw_address): clean up
- (link_timeout_cb, ppp_state_changed): change state instead of calling
deactivation directly as deactivation doesn't change state anymore
* src/NetworkManagerPolicy.c
- (schedule_activate_check): yay, remove wireless_enabled hack since
the NMManager and wireless devices work that out themselves now
- (device_state_changed): change to a switch and update for new device
states
- (device_carrier_changed): remove; device handles this now through
state changes
- (device_added): don't care about carrier any more; the initial
activation check will happen when the device transitions to
DISCONNECTED
* src/nm-manager.c
- (dispose): clear unmanaged devices
- (handle_unmanaged_devices): update unmanaged device list and toggle
the managed property on each device when needed
- (system_settings_properties_changed_cb): handle signals from the
system settings service
- (system_settings_get_unmanaged_devices_cb): handle callback from
getting the unmanaged device list method call
- (query_unmanaged_devices): ask the system settings service for its
list of unmanaged devices
- (nm_manager_name_owner_changed, initial_get_connections): get unmanaged
devices
- (manager_set_wireless_enabled): push rfkill state down to wireless
devices directly and let them handle the necessary state transitions
- (manager_device_state_changed): update for new device states
- (nm_manager_add_device): set initial rfkill state on wireless devices
- (nm_manager_remove_device): don't touch the device if it's unmanaged
- (nm_manager_activate_connection): return error if the device is
unmanaged
- (nm_manager_sleep): handle new device states correctly; don't change
the state of unavailable/unmanaged devices
* libnm-glib/nm-device-802-11-wireless.c
- (state_changed_cb): update for new device states
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3540 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* system-settings/src/main.c
- (unmanaged_devices_changed_cb, register_plugin): proxy changes from
plugins to the dbus settings object
- (load_stuff): start the dbus service after grabbing unmanaged devices
- (dbus_reconnect, dbus_cleanup): make HAL manager aware of dbus events
- (log_handler, logging_setup, logging_shutdown): log output to syslog
- (main): switch default logging to syslog with a 'debug' option to
output to console; start up the HAL manager
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3538 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-settings-system.xml
introspection/Makefile.am
- Define the unmanaged devices interface for the system settings service
* system-settings/src/nm-system-config-hal-manager.c
system-settings/src/nm-system-config-hal-manager.h
system-settings/src/nm-system-config-hal-manager-private.h
system-settings/src/Makefile.am
- Add a lightweight HAL manager object for tracking network devices for
the purpose of determining unmanaged devices and which devices need
the default DHCP connections
* system-settings/src/nm-system-config-interface.c
system-settings/src/nm-system-config-interface.h
- (nm_system_config_interface_init): add the HAL manager as an argument
- (nm_system_config_interface_get_unmanaged_devices): implement
- Define 'unmanaged-devices-changed' signal
* system-settings/src/dbus-settings.c
system-settings/src/dbus-settings.h
- Implement the unmanaged devices interface; some cleanups
* system-settings/plugins/ifcfg-suse/plugin.c
- Fixup for plugin interface changes
* system-settings/plugins/ifcfg-fedora/plugin.c
- (get_ether_device_udi): new function; find the device that has
a specified MAC address and return its UDI
- (get_udi_for_connection): new function; try to find the specific
device a connection is locked to, if any
- (device_added_cb, device_removed_cb): update unmanaged device list in
response to HAL events
- (get_unmanaged_devices): new function; return unmanaged device list
- (build_one_connection): set the connection's locked device, if any
- (write_auto_wired_connection): remove
- (kill_old_auto_wired_file): remove the ifcfg-Auto Wired file if found
- (handle_connection_changed): alert listeners that the unmanaged device
list has changed
- (init): fixup for plugin interface changes, implement unmanaged devices
* system-settings/plugins/ifcfg-fedora/parser.c
system-settings/plugins/ifcfg-fedora/parser.h
- (connection_data_free): clean up connection UDI
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3537 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-hal-manager.c
src/nm-hal-manager.h
- (hal_init): don't look for hardware here
- (nm_hal_manager_start): new function; look for hardware here instead,
which can be done at a later time than hal_init()
* src/NetworkManager.c
- (main): start HAL manager after entering the main loop
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3530 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-settings.c
libnm-glib/nm-settings.h
- (nm_exported_connection_get_id): new function
- (impl_exported_connection_get_id): use nm_exported_connection_get_id()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3528 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* system-settings/plugins/ifcfg-fedora/parser.c
- (read_mac_address): new function; read in MAC address and stuff it
into the connection
- (add_one_wep_key): remove debug spew
- (make_wireless_security_setting): validate the default TX key; don't
add the wireless-security setting if the connection doesn't need
security; don't leak the keys shvarFile on error cases
- (make_wireless_setting, make_wired_setting): populate device's MAC
address
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3526 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-vpn-service.c
- (nm_vpn_service_daemon_exec): add an error argument so that spawn
errors can be passed back to the caller; also no longer scheduled
as an idle handler, but called directly; and bump up VPN service
spawn timeout, 2s is really short
- (nm_vpn_service_activate): don't schedule the VPN service activation,
but call it directly so that errors are reported on return from
ActivateConnection() and don't get lost. If scheduled as an idle
handler, clients don't have the time to query NM for the new VPN
connection's properties before the VPN connection is torn down again
if the service couldn't be launched, and therefore launch errors
get lost.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3521 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-vpn-connection.c
- (device_state_changed): send correct state on device failure too
- (plugin_state_changed): failed state means unexpected disconnection,
thus if the service goes away while the VPN connection is activated
that's a failure too
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3520 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
