* info-daemon/NetworkManagerInfoDbus.c
- (nmi_dbus_nmi_message_handler): make sure 'dialog' exists before using it
* src/NetworkManagerDevice.c
- (nm_device_new): Don't store the entire range struct, use only what we need
(which is currently avg_quality, max_quality, and frequencies). Also
zero device structure when we've free'd it to maybe expose errors down
the line.
- (nm_device_update_signal_strength): grab the scan mutex before getting
quality data from the card since quality will be useless during a scan.
Call updated wireless qual-to-percent function with values stored in
nm_device_new() earlier.
- Remove some unused functions (nm_device_get_max_quality(), nm_device_get_noise(),
nm_device_get_bad_crypt_packets())
- (nm_device_activate_wireless_adhoc): use new frequency values we go in
nm_device_new()
- (get_initial_auth_method): always use the Auth method that's in the allowed
list if available. Problem was this: when the WEP key is wrong, NM will
try OS then SK modes, and then get stuck in SK mode after that. This
should reset it.
- (nm_device_wireless_process_scan_results): work with new qual-to-percent
function
* src/NetworkManagerWireless.c
- (nm_wireless_qual_to_percent): try to make this function actually work and
mimic iwlib behavior. Use card's idea of quality divided by max_qual
if that's all present, otherwise fall back to signal-to-noise ratios.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@402 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* initscript/RedHat/NetworkManager
- Don't spit out sysctl stuff to console
* libnm_glib/libnm_glib.c
- (libnm_glib_init): call dbus_g_thread_init()
* panel-applet/NMWirelessAppletDbus.c
- (nmwa_dbus_worker): call dbus_g_thread_init()
* src/NetworkManager.c
- (main): call dbus_g_thread_init()
* src/NetworkManagerAPList.c
- (nm_ap_list_print_members): use LOG_ERR instead of LOG_DEBUG
so we can actually see what's there in a normal syslog
* src/NetworkManagerDevice.c
- (nm_device_activate_wireless): print out the "waiting for access point"
message only once, then say what access point we actually got after
the wait.
- (nm_device_need_ap_switch): If a scan is in progress when we're in this
function, wait until the scan is done. Scans may change the ESSID of
the card, making this function think we need to switch access points
- (nm_device_wireless_process_scan_results): for artificial access points
don't check against the card's ESSID, but the best_ap's ESSID. This
prevents collisions with the scanning code, which may change the card's
ESSID and cause the access point to get dropped from the device's AP
list. Also increase the keep-around time to 2m from 60s since the max
scan interval could be 60s in some cases.
* src/NetworkManagerPolicy.c
- (nm_policy_activation_finish): Don't add invalid MAC addresses to GConf
- (nm_policy_allowed_ap_list_update): When we update, make sure we copy over
the new properties and ESSIDs to the device's AP list. Fixes some races
between NM and NMI.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@401 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c
- (nmi_dbus_add_network_address): if the network doesn't yet exist in
GConf, make a minimal entry for it (essid & timestamp)
* src/NetworkManagerAPList.c
- (nm_ap_list_populate_from_nmi): Don't try to grab network data if
NetworkManagerInfo isn't running
* src/NetworkManagerDbus.[ch]
- (nm_dbus_nmi_is_running): new function
* src/NetworkManagerDevice.c
- (nm_device_wireless_force_use): Don't set the created AP's MAC
address to garbage.
* src/NetworkManagerPolicy.c
- (nm_policy_activation_finish): On successful activation, make sure
the "best" AP has a MAC address, and don't tell NMI to add the
current AP's MAC address to GConf if the AP is an Ad-hoc AP.
- (nm_policy_allowed_ap_list_update): Update a wireless card's "best"
access point after refreshing our allowed list if it doesn't already
have a "best" access point.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@400 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessAppletDbus.c
- (nmwa_dbus_filter): Fix dbus 0.23 ServiceOwnerChanged checks
so we check for NM_DBUS_SERVICE rather than not for it
* libnm_glib/libnm_glib.c
- (libnm_glib_dbus_filter): Fix for dbus 0.23, trapping
ServiceOwnerChanged signal
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@399 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in
- Check DBUS version in configure, and set the C macros
DBUS_VERSION_[MAJOR,MINOR,MICRO]
* info-daemon/NetworkManagerInfoDbus.c
- Remove #if 0-d section of code that quit NMI if NM went away.
* panel-applet/NMWirelessAppletDbus.c
- Trap the "ServiceOwnerChanged" signal that's new in dbus-0.23
* src/NetworkManager.c
src/NetworkManagerMain.h
src/NetworkManagerDbus.c
- Trap the "ServiceOwnerChanged" signal that's new in dbus-0.23
- Make updating of our Allowed Wireless Network lists from NMI
an idle function in the main thread now, with a high priority.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@398 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/gtkcellview.[ch]
panel-applet/menu-info.c
- Fix GTK version checks to be <= rather than <
* test/Makefile.am
- Include the libtool archive of libnm_glib rather than
trying to pull in the .so
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@397 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
src/NetworkManagerDevicePrivate.h
- Block nm_device_new() until our device's worker thread has had a
chance to start up. Fixes a race between main thread and worker
thread starting that caused activation requests to get lost.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@396 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* initscript/RedHat/NetworkManager
- Remove the ### BEGIN INIT INFO section, which caused chkconfig
to add the NM startup script at priority 50, which was
way too early
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/gtkcellview.[ch]
- Only compile these files for GTK 2.4 or lower, since
GtkCellView is now public in GTK 2.6. Fixes crasher
when choosing "Other Wireless Networks" from the panel
applet menu
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@391 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.[ch]
panel-applet/NMWirelessAppletDbus.c
panel-applet/menu-info.c
src/NetworkManagerDevice.c
- Disable wired devices in the menu when they have no link.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@389 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Cache last-known-good wireless authentication method in
NetworkManagerInfo, and use that method first during
wireless device activation. Should speed up devices that
need Shared Key authentication method since Open System is
now the default.
* Remove the hack to not do full activation on wired connections
that are active when we launch, it causes too many problems
with name resolution and was a hack in the first place.
* Re-work wireless device activation again somewhat to have a
clearer chain of events and to use last-known-good
authentication method of the access point. Also provide
better status throughout activation to ensure the applet
can tell the user exactly what's going on.
* Remove the "find wireless network" code and now simply attempt
to activate with that access point. This reduces the delay
between selecting "Other wireless Network" and actually
connecting to that network.
* Correctly stop the device's worker thread when its removed.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@388 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Add new icons, more frames of animation
* Remove some hacks to get the panel applet to display correct
status, an NM update will soon follow that will fix the
real issue.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@385 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c: #include <config.h> must be
the first include for working i18n. Also, don't include it in .h files
* panel-applet/NMWirelessApplet.h: Same
* panel-applet/NMWirelessAppletOtherNetworkDialog.c: Same
* panel-applet/menu-info.c: Same
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@384 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- Remove some debug messages
- Wrap others in #ifdef DEBUG/#endif
* src/NetworkManager.c
- Remove some debug messages
- Clarify some debug messages
- Remove code related to old single-thread wireless scanning
* src/NetworkManagerAP.[ch]
- New AP property "last_seen" to track how recently an AP was
found in a scan
- Start using 'const' more in function arguments
* src/NetworkManagerAPList.[ch]
- (nm_ap_list_merge_scanned_ap): new, selectively update attributes
of an AP found in an AP list from a source AP, or if not found
in the list add the source AP
- (nm_ap_list_combine): remove, no longer needed
* src/NetworkManagerDevice.c
- Each device now has a "worker" thread from start to end of its life.
Scanning for wireless devices now happens in that thread,
not in a single "wireless scanning thread" for all devices as
previously. Activation consists of adding an idle handler to the
thread's main loop/context, which gets run at the next available
opportunity.
- Wireless scanning is also simplified, there is now only one list of
access points per wireless device, and APs older than 60s are
removed from the list. Previously, we kept results for the last
3 scans and merged whole lists, which was complicated.
- Cleaned up activation debug messages.
- Wireless activation and access-point search routines now use Open System
authentication before trying Shared Key.
- Removed some code in nm_device_update_best_ap() that could cause cards
to loose their link to the access point.
- Scanning now uses a backoff algorithm, where the inverval becomes
progressively longer between scans when the list of scanned access
points doesn't change. A change will revert to the shortest scan
interval (20s).
* src/NetworkManagerWireless.[ch]
- Remove code related to old single-thread wireless scanning
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@382 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* named/nm-named-manager.c (generate_named_conf): Many fixes
to config file generation.
(safer_kill): Remove, was too much trouble for little gain.
(nm_named_manager_start): Run named as NM_NAMED_USER.
* configure.in: Add option --with-named-user.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@380 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from ed@catmur.co.uk (Ed Catmur)
* named/nm-named-manager.c: Add "context" property.
Use it to add child watch source in specific GMainContext.
* src/NetworkManager.c (nm_data_new): Initialize
named with correct main context. Start named only
after forking.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@377 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* named/nm-named-manager.c (generate_named_conf): Write config
and pid files into NM_NAMED_DATA_DIR; this allows things to
work better with FC3 named SELinux policy. Also fix up silly
format error.
* configure.in: Add --with-named-dir option.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@376 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in: Make named support require passing --with-named.
* named/nm-named-manager.c: Support writing resolv.conf directly
without running named.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@375 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* named/nm-named-manager.c
- Use syslog(LOG_WARNING) rather than g_warning() (gnome.org #163961)
* src/NetworkManagerDevice.c
- Rework wireless link detection code to be more reliable
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@374 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* initscripts/RedHat/NetworkManager
- Change initial level to "-" rather than "345" so that
we don't activate ourselves by default on install
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@369 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm_glib/
- Client library for applications using glib
* configure.in
various Makefiles
- Split NM_CFLAGS and NM_LIBS into separate variables
like DBUS_*, HAL_* and GLIB_*
* src/NetworkManager.c
src/NetworkManagerMain.h
- (nm_schedule_status_signal_broadcast): at the earliest convenience,
broadcast a status changed signal over DBUS from the main thread.
Still unused anywhere for the moment.
Patch from j@bootlab.org
* panel_applet/NMWirelessAppletDbus.c
src/NetworkManagerDbus.c
- Correct INT32->UINT32 mistmatch between NM and the panel applet
for the "getMode" method call
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@368 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
- Implement "auto" frequency/channel support, since cards like Atheros
can't use other frequencies at all when you've told it to use a
specific one, even for scanning.
- Grab the scan mutex around places where we can't tolerate wireless
settings changing underneath us, like nm_device_wireless_network_exists()
and nm_device_activate_wireless()
* src/NetworkManagerWireless.c
- Back scan interval off to 20s instead of 14s
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@366 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
- Don't set mode/freq/bitrate if that mode/freq/bitrate is
already set. Stops some drivers like Atmel from continually
reloading the firmware, which they do upon every configuration
change.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@365 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- Use correct timeout value
* info-daemon/NetworkManagerInfoDbus.c
src/NetworkManagerDbus.c
- Consolidate communication between NM and NMI by doing only 1 dbus
method call to get Wireless Network info from NMI instead of 6
* src/NetworkManager.c
- Make sure to cancel activation when we receive a SIGTERM, otherwise
when we didn't have an AP to use, we'd wait for one forever without
quitting
* src/NetworkManagerDevice.c
- nm_device_activation_cancel(): Fix a race between dhcp and quitting
activation, dhcp might not have started yet but we don't quit activation
before starting it, so the quit signal gets lost
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@363 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- Rework the DHCP client code to be much less chatty when
it receives non-DHCP UDP packets during the DHCP run
(reported by and preliminary patches from Bill Moss)
* Move wireless scanning to a separate thread. This thread forwards the
results to the main thread when done where they are integrated into
the device's access point lists. This keeps the main thread (which
does all the DBUS communication) from being blocked for long periods
of time by wireless scanning.
* Make state modification an idle routine in the main loop, and trigger
state changes rather than polling for them.
* src/backends/NetworkManagerGentoo.c
- Fix up invalid C90 code (reported by Christoph Ruessler)
* src/NetworkManagerDevice.c
- Revert IPv6 patch for wired devices from 2004-12-22 for
router advertisements, causing problems and infinite loop
during "best" device determination due to link going up/down
(reported by Bill Moss)
Apply patch from Peter Jones
* src/NetworkManagerDevice.c
- Shortcut for link-checking for ipw2x00 cards
- Split out association check into separate routine
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@360 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
- Take down then bring up wired devices after connection so
they send out ipv6 router advertisements
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@356 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
- Silently fail when setting bitrate doesn't work
Patch from j@bootlab.org:
* src/backends/NetworkManagerDebian
- Update backend to match functionality in RedHat backend
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@355 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
