Instead of doing this in every device subclass, do it in the NMDevice
superclass. nm_device_can_activate() already did the same logic that
each of the subclass device_state_changed() handlers were doing to
figure out whether they could do the transition from unavailable
to disconnected, so just use that in NMDevice and kill lots of code.
Mark activation requests that contain connections to be assumed,
and use that to short-circuit various parts of the activation
process by not touching various device attributes, since they
are already set up. Also ensure the device is not deactivated
when it initially becomes managed, because that would kill the
connection we are about to assume.
* include/NetworkManager.h
introspection/nm-device.xml
- Add device state change reason for carrier changes
* src/nm-device-ethernet.c
- (set_carrier): use the carrier change reason when changing device
state in response to carrier changes
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@4203 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
introspection/nm-device.xml
include/NetworkManagerVPN.h
- Add a few more state reasons for the device deactivated state
* src/nm-device-interface.c
src/nm-device-interface.h
- (nm_device_interface_deactivate): add a 'reason' argument
* src/nm-device.c
src/nm-device.h
- (nm_device_deactivate, nm_device_take_down): add a 'reason' argument
- (nm_device_state_changed): pass the state change reason to
nm_device_take_down()
- (nm_device_set_managed): take a 'reason' argument, and pass it along
to the state change function
* src/nm-manager.c
src/nm-manager.h
- (remove_one_device, handle_unmanaged_devices, sync_devices,
impl_manager_sleep): pass a reason code to nm_device_set_managed()
- (nm_manager_deactivate_connection): add a 'reason' argument and pass
something reasonable along to VPN deactivation
* src/vpn-manager/nm-vpn-manager.c
src/vpn-manager/nm-vpn-manager.h
- (nm_vpn_manager_deactivate_connection): add a 'reason' argument and
pass that along to nm_vpn_connection_disconnect()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@4174 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
introspection/nm-device.xml
- Add a "missing firmware" device state reason
* src/NetworkManagerSystem.c
src/NetworkManagerSystem.h
- (nm_system_device_set_up_down): add a no_firmware argument
- (nm_system_device_set_up_down_with_iface): if the result of setting
IFF_UP is ENOENT, that almost always means missing firmware
* src/backends/NetworkManagerGeneric.c
src/nm-device-ethernet.c
src/nm-device-private.h
src/nm-device-wifi.c
src/nm-device.c
src/nm-device.h
src/nm-hso-gsm-device.c
src/vpn-manager/nm-vpn-connection.c
- Pass no_firmware along; check it where appropriate
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3983 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
- Add the DHCP4Config D-Bus interface
* libnm-glib/Makefile.am
libnm-glib/nm-dhcp4-config.c
libnm-glib/nm-dhcp4-config.h
- Handle DHCP4 config objects exported by NM over D-Bus
* libnm-glib/nm-device.c
libnm-glib/nm-device.h
- Add a 'dhcp4-config' property
* libnm-glib/libnm-glib-test.c
- Print out DHCP4 config for devices
- Fix some crashes when no connections are active
* src/nm-device-interface.c
src/nm-device.c
src/nm-dhcp4-config.c
src/nm-dhcp4-config.h
- Treat dhcp4-config object as an object path at the D-Bus interface so
that when it doesn't exist we can proxy it as "/" which dbus-glib
doesn't let us do when the property type is G_TYPE_OBJECT
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3905 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Modify the NMDevice::state-changed signal to include the previous state
and reason. Enables the applet to provide more information why device
activation failed.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3819 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Tambet Ingo <tambet@gmail.com>
* src/ppp-manager/nm-ppp-manager.c: Add ppp stats monitoring, signal the
changes.
* src/nm-serial-device.c: Monitor "ppp-stats" signals from NMPPPManager. Add
a signal to emit these changes over dbus.
* src/Makefile.am: Genereate nm-serial-device-glue.
* libnm-glib/nm-serial-device.[ch]: Implement.
* libnm-glib/nm-cdma-device.[ch]
libnm-glib/nm-gsm-device.[ch]: Inherit from NMSerialDevice.
* libnm-glib/Makefile.am: Add nm-serial-device.[ch].
* introspection/nm-device-serial.xml: Implement.
* introspection/all.xml: Fix a couple of typos, add nm-device-serial.xml.
* introspection/Makefile.am: Add nm-device-serial.xml.
* include/NetworkManager.h: Add a DBus interface for serial device.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3740 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-dbus-settings.c (constructor): Fix the
"PropertiesChanged" signal signature.
* libnm-glib/nm-dbus-connection.c (constructor): Use the common GType
defined in nm-dbus-glib-types.h.
Don't register the connection on dbus, we're a proxy class to
communicate with an already registered connection over dbus.
2008-04-30 Tambet Ingo <tambet@gmail.com>
Implement new subclasses of NMSettings and NMExportedConnection to make
it easier for the applet to access and modify system settings.
* libnm-glib/nm-dbus-connection.[ch]:
* libnm-glib/nm-dbus-settings.[ch]:
* libnm-glib/nm-dbus-settings-system.[ch]: Implement.
* libnm-glib/Makefile.am: Add the new files to build, generate some more
bindings and glue.
* include/NetworkManager.h: Define the system settings DBus interface.
2008-04-30 Tambet Ingo <tambet@gmail.com>
Implement additional C API for exported connections to make them identical
with the DBus API. Change the (list_connections) virtual function to be
more usable from C - instead of requiring implementers to return a GPtrArray
of dbus paths, return a list of connections.
* libnm-glib/nm-settings.c (nm_exported_connection_class_init): Fix a typo.
(nm_settings_list_connections):
(nm_exported_connection_new):
(nm_exported_connection_update):
(nm_exported_connection_delete): Implement.
(impl_settings_list_connections):
(impl_exported_connection_update):
(impl_exported_connection_delete): Use the new public functions to make
sure the C and dbus interfaces stay in sync.
* system-settings/src/dbus-settings.c (list_connections): Return a list of
connections.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3630 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
- Add NMActiveConnectionState enum
* introspection/nm-active-connection.xml
introspection/nm-vpn-connection.xml
- Add 'State' property for overall active connection state
- Add 'Default' property, when True means this active connection
has the default route
- Add PropertyChanged signals so changes actually go out over the bus
* src/nm-active-connection.h
- Add defines for State & Default properties
* src/nm-activation-request.c
- Add 'state' and 'default' properties, hook up to device 'state-changed'
signal to determine active connection state
* src/vpn-manager/nm-vpn-connection.c
src/vpn-manager/nm-vpn-connection.h
src/vpn-manager/nm-vpn-manager.c
src/vpn-manager/nm-vpn-service.c
- Rename old 'state' to 'vpn-state'
- Rename nm_vpn_connection_get_state() -> nm_vpn_connection_get_vpn_state()
- Add 'state' and 'default' properties, hook up to the vpn connection's
'vpn-state-changed' signal
* libnm-glib/nm-active-connection.c
libnm-glib/nm-active-connection.h
- Add new 'state' and 'default' properties and accessors
* libnm-glib/nm-vpn-connection.c
libnm-glib/nm-vpn-connection.h
- Rename old 'state' property to 'vpn-state'
- Add new 'state' and 'default' properties and accessors
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3582 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Remove exposure of wireless-tools mode types in the API.
* include/NetworkManager.h
- Define NM80211Mode enum
* introspection/generic-types.xml
- Describe NM_802_11_MODE enum
- Remove IW_MODE_* enum
* introspection/nm-access-point.xml
libnm-glib/nm-access-point.c
libnm-glib/nm-access-point.h
- 'mode' is now of type NM80211Mode, a DBUS_TYPE_UINT
* introspection/nm-device-802-11-wireless.xml
libnm-glib/nm-device-802-11-wireless.c
libnm-glib/nm-device-802-11-wireless.h
- 'mode' is now of type NM80211Mode, a DBUS_TYPE_UINT
* libnm-util/nm-setting-wireless.c
src/NetworkManagerAP.c
src/NetworkManagerAP.h
src/nm-device-802-11-wireless.c
src/nm-device-802-11-wireless.h
test/nm-tool.c
- Use NM80211Mode not IW_MODE_*
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3562 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
- Remove the DOWN and CANCELLED device states
- Add UNMANAGED and UNAVAILABLE device states
- Document the device states
* introspection/nm-device.xml
src/nm-device-interface.c
src/nm-device-interface.h
- Add the 'managed' property
* test/nm-tool.c
- (detail_device): print out device state
* src/NetworkManagerSystem.h
src/backends/NetworkManagerArch.c
src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerFrugalware.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerMandriva.c
src/backends/NetworkManagerPaldo.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSlackware.c
src/backends/NetworkManagerSuSE.c
- (nm_system_device_get_system_config, nm_system_device_get_disabled
nm_system_device_free_system_config): remove; they were unused and
their functionality should be re-implemented in each distro's
system settings service plugin
* src/nm-gsm-device.c
src/nm-gsm-device.h
src/nm-cdma-device.c
src/nm-cdma-device.h
- (*_new): take the 'managed' argument
* src/nm-device.c
- (nm_device_set_address): remove, fold into nm_device_bring_up()
- (nm_device_init): start in unmanaged state, not disconnected
- (constructor): don't start device until the system settings service
has had a chance to figure out if the device is managed or not
- (nm_device_deactivate, nm_device_bring_up, nm_device_bring_down):
don't set device state here, let callers handle that as appropriate
- (nm_device_dispose): don't touch the device if it's not managed
- (set_property, get_property, nm_device_class_init): implement the
'managed' property
- (nm_device_state_changed): bring the device up if its now managed,
and deactivate it if it used to be active
- (nm_device_get_managed, nm_device_set_managed): do the right thing
with the managed state
* src/nm-hal-manager.c
- (wired_device_creator, wireless_device_creator, modem_device_creator):
take initial managed state and pass it along to device constructors
- (create_device_and_add_to_list): get managed state and pass to
type creators
* src/nm-device-802-11-wireless.c
- (real_can_activate): fold in most of
nm_device_802_11_wireless_can_activate()
- (can_scan): can't scan in UNAVAILABLE or UNMANAGED
- (link_timeout_cb): instead of deactivating, change device state and
let the device state handler to it
- (real_update_hw_address): clean up
- (state_changed_cb): when entering UNAVAILABLE state, schedule an idle
handler to transition to DISCONNECTED if the device isn't rfkilled
* src/nm-device-802-3-ethernet.c
- (set_carrier): move above callers and get rid of prototype
- (device_state_changed): when entering UNAVAILABLE state, schedule an
idle handler to transition to DISCONNECTED if the device has a
carrier
- (real_update_hw_address): clean up
- (link_timeout_cb, ppp_state_changed): change state instead of calling
deactivation directly as deactivation doesn't change state anymore
* src/NetworkManagerPolicy.c
- (schedule_activate_check): yay, remove wireless_enabled hack since
the NMManager and wireless devices work that out themselves now
- (device_state_changed): change to a switch and update for new device
states
- (device_carrier_changed): remove; device handles this now through
state changes
- (device_added): don't care about carrier any more; the initial
activation check will happen when the device transitions to
DISCONNECTED
* src/nm-manager.c
- (dispose): clear unmanaged devices
- (handle_unmanaged_devices): update unmanaged device list and toggle
the managed property on each device when needed
- (system_settings_properties_changed_cb): handle signals from the
system settings service
- (system_settings_get_unmanaged_devices_cb): handle callback from
getting the unmanaged device list method call
- (query_unmanaged_devices): ask the system settings service for its
list of unmanaged devices
- (nm_manager_name_owner_changed, initial_get_connections): get unmanaged
devices
- (manager_set_wireless_enabled): push rfkill state down to wireless
devices directly and let them handle the necessary state transitions
- (manager_device_state_changed): update for new device states
- (nm_manager_add_device): set initial rfkill state on wireless devices
- (nm_manager_remove_device): don't touch the device if it's unmanaged
- (nm_manager_activate_connection): return error if the device is
unmanaged
- (nm_manager_sleep): handle new device states correctly; don't change
the state of unavailable/unmanaged devices
* libnm-glib/nm-device-802-11-wireless.c
- (state_changed_cb): update for new device states
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3540 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-manager.xml
introspection/nm-manager-client.xml
- (ActivateConnection): return the object path of the active connection
on success
- (GetActiveConnections): remove
- (DeactivateConnection): new function; deactivate a currently active
connection
- Add an ActiveConnections property which returns an array of
active connection object paths
* introspection/nm-device.xml
- (Deactivate): remove
* introspection/all.xml
- Add ActiveConnection introspection
* introspection/nm-active-connection.xml
- Add the ActiveConnection object
* include/NetworkManager.h
- Add the Connection.Active D-Bus interface
* src/nm-device-interface.c
- (impl_device_deactivate): remove
* src/nm-activation-request.c
src/nm-activation-request.c
src/Makefile.am
- Implement the Connection.Active D-Bus interface
* src/nm-manager.c
- (get_property, nm_manager_class_init): add ACTIVE_CONNECTIONS property
- (nm_manager_activate_device): return the active connection path
- (connection_added_default_handler, impl_manager_activate_connection):
return the active connection to the caller
- (add_one_connection_element, impl_manager_get_active_connections):
remove
- (impl_manager_deactivate_connection): new function; deactivate an
active connection
* libnm-glib/nm-device.c
libnm-glib/nm-device.h
- Remove Deactivate() function
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3484 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-manager.xml
introspection/nm-manager-client.xml
- Rename the ActivateDevice method to ActivateConnection to better
reflect it's usage; it's arguments get reordered a bit too
- Convert GetActiveConnections method return from a struct to a dict
* include/NetworkManager.h
- Define the dict keys for return value of GetActiveConnections
* src/nm-manager.c
- impl_manager_activate_device -> impl_manager_activate_connection
- (add_one_connection_element): return a populated hash table, not
a structure
* libnm-glib/nm-client.c
libnm-glib/nm-client.h
- nm_client_activate_device -> nm_client_activate_connection
- nm_client_free_active_connection_element -> nm_client_free_active_connections_element
- (nm_client_get_active_connections): return a GSList of GHashTables,
instead of the custom structures. Each element of the returned list
must be freed with nm_client_free_active_connections_element()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3482 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
- Add CDMA mobile broadband card device type
* src/nm-hal-manager.c
- (modem_device_creator): handle both CDMA and GSM modems; the device
must now be tagged with 'cdma' or 'gsm' capability
* src/nm-cdma-device.c
src/nm-cdma-device.h
src/Makefile.am
- Add the CDMA mobile broadband card device class
* libnm-util/nm-connection.c
- (register_default_settings): add NMSettingCdma
* libnm-util/nm-setting-cdma.c
libnm-util/nm-setting-cdma.h
libnm-util/Makefile.am
- Add the CDMA mobile broadband card setting class
* libnm-glib/nm-cdma-device.c
libnm-glib/nm-cdma-device.h
libnm-glib/Makefile.am
- Add the CDMA mobile broadband card GLib proxy class
* libnm-glib/nm-client.c
- (get_device): handle CDMA devices too
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3261 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Merge the beginnings of the new GSM card support.
* src/ppp-manager/nm-ppp-manager.c (nm_ppp_manager_stop): Remove
* the
ppp watch source before killing pppd - If this happens from
g_object_unref()
then the ppp manager is already destroyed by the time the watch
callback runs.
* src/nm-hal-manager.c: Add a device_type_name string to the
* device
creators, so that we can print a nice human readable string when
a
device is added.
* src/nm-umts-device.c (automatic_registration_get_network):
* Query
for the activated network, not much is done with the result
thought.
* src/nm-serial-device.c (nm_serial_device_get_reply):
* Implement.
(ppp_ip4_config): Change the device state to activated here for
now.
(real_check_connection): Make sure the connection includes ppp
setting.
* libnm-glib/nm-client.c (get_device): Handle umts devices.
* libnm-glib/Makefile.am: Add the new files to build.
* libnm-glib/nm-umts-device.c:
* libnm-glib/nm-umts-device.h: Implement.
2007-11-26 Tambet Ingo <tambet@gmail.com>
* src/nm-umts-device.c (automatic_registration_get_network): For
* now, dial
immediately, nm_serial_device_get_reply() isn't implemented
correctly yet.
* src/nm-serial-device.c (wait_for_reply_info_destroy): Don't
* try to remove
the timeout source - this function is only called when the
timeout source has
been removed.
(nm_serial_device_wait_for_reply): Allocate the duplicate
responses array
to be big enough to contain the terminating zero element as
well.
The timeout argument is meant to be in seconds now.
(real_deactivate_quickly): Implement.
* src/NetworkManager.conf: Allow root to own
"org.freedesktop.NetworkManager.PPP", deny it for everybody
else.
* libnm-util/nm-setting-umts.c: Network type and band properties
* are ints,
(not unsigned ints).
* libnm-util/nm-setting-serial.c (nm_setting_serial_class_init):
* Fix a
small issue with parity bounds - capital letters have lower
ascii codes
than lower case letters.
* libnm-util/nm-connection.c (register_default_settings):
* Register serial
and umts settings.
2007-11-22 Tambet Ingo <tambet@gmail.com>
Remove the "index" property from devices as not all device types
have this.
* include/NetworkManager.h (NM_DBUS_PATH_DEVICE): Remove.
* src/nm-hal-manager.c (nm_get_device_index_from_hal): Remove.
(wired_device_creator): Get the device interface from hal to
create the device.
(wireless_device_creator): Ditto.
* src/nm-device.c (nm_device_init): Remove the index member.
(constructor): Remove the checks for index property, make
interface property
a require constructor property.
Use the HAL udi for DBus path for devices.
(nm_device_get_index): Remove.
(set_property): Remove index handling.
(get_property): Ditto.
(nm_device_get_dbus_path): Remove.
* src/nm-device-interface.c (nm_device_interface_init): Remove
* the index
property.
* src/nm-device-802-3-ethernet.c
* (nm_device_802_3_ethernet_link_activated):
Access the device index through it's interface.
(nm_device_802_3_ethernet_link_deactivated): Ditto.
(nm_device_802_3_ethernet_new): Remove the useless argument
test_dev. Remove
index argument. Add interface argument.
* src/nm-device-802-11-wireless.c
* (nm_device_802_11_wireless_new): Remove
the useless test_dev argument. Remove index argument. Add
interface arugment.
* src/NetworkManagerSystem.c
* (nm_system_device_set_from_ip4_config): Get the
device index through interface.
(nm_system_set_mtu): Ditto.
* introspection/nm-device.xml: Remove the "Index" property.
2007-11-21 Tambet Ingo <tambet@gmail.com>
* src/nm-serial-device.c:
* src/nm-serial-device.c:
* src/nm-umts-device.c:
* src/nm-umts-device.h: Implement.
* src/nm-hal-manager.c (nm_get_device_driver_name):
* libhal_free_string the string
allocated by libhal.
(modem_device_creator): Implement.
(register_built_in_creators): Register the modem creator.
* src/nm-device-802-11-wireless.c
* (nm_device_802_11_wireless_new):
Remove the unused test_dev argument.
* src/nm-device-802-3-ethernet.c (nm_device_802_3_ethernet_new):
* Ditto.
* src/Makefile.am: Add new files to build.
Link in ppp-manager.
* libnm-util/nm-setting-umts.c:
* libnm-util/nm-setting-umts.h:
* libnm-util/nm-setting-serial.c:
* libnm-util/nm-setting-serial.h: Implement.
* libnm-util/Makefile.am: Add new files to build.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3116 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Split the GetSecrets() call off to a separate D-Bus interface so that it
can be more easily locked down with D-Bus policy. Only 'root' (ie, NM)
should be able to call GetSecrets().
* include/NetworkManager.h
- Define the connection secrets D-Bus interface
* src/vpn-manager/nm-vpn-connection.c
- (clear_need_auth): get the right proxy object for the connection
secrets interface
- (get_connection_secrets): use the connection secrets proxy; send
empty hints in get secrets request
* src/nm-activation-request.c
- (nm_act_request_request_connection_secrets): use the connection
secrets proxy; send empty hints in get secrets request
* src/nm-manager.c
src/nm-manager.h
- (connection_get_settings_cb): set the connection secrets proxy on
the connection object too
- (internal_new_connection_cb): create the connection secrets proxy
* introspection/nm-settings-connection.xml
- Define Connection.Secrets interface and move GetSecrets there
- Add a 'hints' argument to GetSecrets
* libnm-glib/nm-settings.c
libnm-glib/nm-settings.h
- (impl_connection_settings_get_secrets): add 'hints' argument
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2989 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Implement killswitch polling through HAL.
* src/nm-manager.c: Add wireless hardware status property. Add
'properties-changed' signal for changes in wireless and wireless
hardware
state changes.
* src/nm-hal-manager.c: Poll hal for killswitch statuses in
* every 6 seconds
and update NMManager's wireless hardware state when it has
changed.
(nm_hal_manager_new): Don't try to add initial devices here -
(hal_init)
already does that.
* libnm-glib/nm-client.c: Add wireless hardware status property.
* Cache the
values of wireless state and wireless hardware state. Listen for
the
'properties-changed' signals, update the cached values and emit
notify.
* include/NetworkManager.h: Fix a typo in a comment.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2975 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
- Kill NMNetworkType; AP types don't matter any more
* src/NetworkManagerAPList.c
src/NetworkManagerAPList.h
src/Makefile.am
- Kill; NMAccessPointList has outlived it's usefulness
* src/NetworkManagerAP.c
src/NetworkManagerAP.h
- (match_cipher, security_compatible, nm_ap_check_compatible): new
functions; check if an NMConnection object is compatible with the
settings of this AP
- (freq_to_channel, channel_to_freq): utility functions for
channel <-> frequency conversion
* src/nm-device.c
src/nm-device.h
- (nm_device_get_best_connection): pass the specific object around
(which might be the object path of a specific AP to connect to).
The get_best_connection() call should populate this on return
if needed (wireless does).
* src/nm-device-802-3-ethernet.c
- (real_get_best_connection): handle specific_object argument
* src/NetworkManager.c
src/NetworkManagerMain.h
- Remove unused includes
* src/nm-device-802-11-wireless.c
src/nm-device-802-11-wireless.h
- Convert the ap_list into a GSList from an NMAccessPointList
- No need for caching the 'activation_ap' since this is now determined
from the specific_object of the activation request, which is
populated from the get_best_connection() call or from a user request
- (nm_device_802_11_wireless_update_bssid): fix warning
- (get_wireless_capabilities): fix error message format arguments
- (nm_device_802_11_wireless_copy_allowed_to_dev_list): remove, unused
- (find_best_connection, real_get_best_connection): implement
- (ap_list_get_ap_by_ssid, nm_device_802_11_wireless_ap_list_print):
move here from NetworkManagerAPList
- (ap_need_secrets): remove; moved to nm-connection.c where it belongs
- (real_act_stage1_prepare): just ensure an AP exists, connection is
already verified earlier
- (real_act_stage2_config): use nm_connection_need_secrets()
* src/NetworkManagerPolicy.c
- (nm_policy_auto_get_best_device): handle specific objects
- (create_connection): remove; automatic connection creation functionality
is handled by the Connection objects
- (nm_policy_device_change_check): handle specific_object
* libnm-util/nm-connection.c
- (wireless_sec_need_secrets, nm_connection_need_secrets): implement
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2778 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Stupid mistake on my part; object path and interface for settings service
and connection objects can be the same, only the service name must be
different for the system and user settings services.
* include/NetworkManager.h
src/nm-manager.c
introspection/nm-settings-connection.xml
introspection/nm-settings.xml
libnm-glib/nm-settings.c
- (nm_connection_settings_init, query_user_connections,
new_connection_cb): Unify NetworkManagerSettings and Connection
interface name and object path
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2772 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
libnm-glib/nm-settings.c
- defines for the user settings daemon D-Bus bits
* src/NetworkManager.c
- Remove stuff that referred to the old NetworkManagerInfo service
* src/vpn-manager/nm-dbus-vpn.h
- Move old NMI defines to the only place they are used still
* libnm-util/nm-connection.c
libnm-util/nm-connection.h
src/nm-activation-request.c
- Make NMConnection a GObject subclass so we can do spiffy stuff with it
* src/nm-manager.c
src/nm-manager.h
- Get connections and their settings from the user settings daemon
at the appropriate times
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2763 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
- Keep NMConnection object path in sync
* libnm-glib/nm-settings.c
libnm-glib/nm-settings.h
- Break D-Bus object registration out of the init function, because
every object that's exported over D-Bus needs to use the _same_
DBusConnection. Otherwise, each object would get a different object
path tree and wouldn't be callable.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2747 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Remove NMAPSecurity objects, they are replaced with flags on the APs for
each AP's capabilities, and by NMConnection/NMSettings objects for user
defined connections.
* include/NetworkManager.h
- Redefine 802.11 security properties. There are now device capabilities
and AP flags and AP security flags. It was way to unclear before.
* src/Makefile.am
src/nm-ap-security-leap.h
src/nm-ap-security-leap.c
src/nm-ap-security-wpa-eap.c
src/nm-ap-security-wpa-eap.h
src/nm-ap-security-private.h
src/nm-ap-security-wpa-psk.c
src/nm-ap-security-wpa-psk.h
src/nm-ap-security-wep.c
src/nm-ap-security-wep.h
src/nm-ap-security.c
src/nm-ap-security.h
- Removed, to be replaced with NMConnection/NMSettings objects
* src/nm-dbus-nmi.c
src/nm-dbus-nmi.h
- Removed, to be replaced by code that talks to the new info daemon
interface and gets NMConnection/NMSettings objects
* src/backends/NetworkManagerSuSE.c
- Remove usage of NMAPSecurity; should be replaced by a system-level
info-daemon that does the same thing but talks the new info-daemon
D-Bus interface
* src/NetworkManagerAP.h
src/NetworkManagerAP.c
src/NetworkManagerAPList.c
libnm-glib/libnm-glib-test.c
- Remove usage of NMAPSecurity objects and adjust to new flags for
WPA/RSN
* libnm-glib/nm-access-point.c
libnm-glib/nm-access-point.h
introspection/nm-access-point.xml
test/nm-tool.c
- Adjust to new flags for AP security
* utils/nm-utils.c
utils/nm-utils.h
src/vpn-manager/nm-dbus-vpn.c
- Remove D-Bus pending call stuff from nm-utils and put it in the VPN
stuff which is the only place it's used
* src/nm-device-interface.c
src/nm-device-interface.h
introspection/nm-device.xml
src/nm-activation-request.c
src/nm-activation-request.h
src/nm-device.c
- Add a new 'specific_object' argument that hints to NM what actual
AP or other device-specific thing the connection should apply to.
NMConnection objects can apply to more than one actual device/AP.
* libnm-util/nm-connection.c
* libnm-util/nm-connection.h
- Add 'have_secrets" call stubs
* libnm-util/cipher.h
- Move NM_AUTH_TYPE_* defines here for now
* src/nm-device-802-11-wireless.c
- Remove usage of NMAPSecurity, to be replaced with NMConnection/
NMSettings objects
* src/NetworkManagerDbus.c
* src/NetworkManagerPolicy.c
- Remove usage of update_allowed_networks, should be pushing data in
a different manner
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2738 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
It's 2007. Remove support for drivers that don't support wireless scanning.
* test/nm-tool.c
include/NetworkManager.h
src/NetworkManagerUtils.c
src/NetworkManagerPolicy.c
src/nm-device-802-11-wireless.c
- Remove special handling for non-scanning devices and mark them
as unsupported/unhandled
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2726 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h: added DBus path for connection settings.
* libnm-glib/nm-settings.[ch] (nm_settings_signal_new_connection,
nm_connection_settings_signal_updated,
nm_connection_settings_signal_removed): new functions to wrap the
objects' signals.
(nm_connection_settings_init): register GObject with DBus.
(nm_connection_settings_get_dbus_object_path): new function.
* libnm-glib/Makefile.am: added libnmutil to link flags.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2672 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list.
We get signalled when it changes.
* libnm-glib/nm-client.c: Cache NMState and device list, we get signalled
when it changes.
* libnm-glib/nm-device.c: Cache the device state property.
* libnm-glib/nm-access-point.c: Cache the strength property.
* src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler.
The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0)
and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan
until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while
the device is down, activating, or activated (in case of A/B/G cards).
Remove some old dead ifdef'ed out code that used to configure wireless devices,
it's all done through supplicant now.
* src/supplicant-manager/nm-supplicant-interface.c: Fix the reference
counting issues with pending calls which caused leaks and crashes when
interface was removed (now that the interface actually gets removed).
* src/nm-call-store.c: Make a copy of data before running a foreach
with user callback on it - The most common usage pattern is to cancel
(and thus remove) all pending calls with foreach which would modify
the hash table we're iterating over.
* src/nm-manager.c: When a device is added, make sure it is "up". When
it's removed or disabled due to disabling wireless or networking, bring
it down.
* include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN.
* src/nm-device-802-11-wireless.c:
* src/nm-device-802-3-ethernet.c:
* src/nm-device.c:
- Remove "init" virtual function, all gobjects have a place for that
already (constructor).
- Replace "start" virtual function with "bring_up", devices can be
brought up and down more than just on startup now.
- Add "is_up" virtual function.
- Implement one way to bring a device down instead of previous 4 different
ways, each of witch did something different.
* src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice,
all it needs is the device interface.
Get rid of NMData.dev_list (3 members to go).
Get rif of NMData in a lot of places.
* gnome/libnm_glib/libnm_glib.c: Make it compile again.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-device-802-11-wireless.c: Add "network-added" and
"network-removed" signals.
* libnm-glib/libnm-glib.pc.in: Require NetworkManager >= 0.7.0.
* libnm-glib/nm-access-point.c: Add "strength-changed" signal, emit it
when receiving the signal from dbus.
* src/nm-device-802-11-wireless.c (get_property): Fix PROP_ACTIVE_NETWORK
property.
* src/NetworkManagerPolicy.c (state_changed): Fix a typo to make the
deactivation of the previously activated device working again.
* src/nm-activation-request.c: Remove NMActStage property and it's getter
and setter.
* src/nm-device.c (nm_device_is_activated): Remove.
state == NM_DEVICE_STATE_ACTIVATED is just as easy to use.
* include/NetworkManager.h: Remove NM_DBUS_NO_DEVICES_ERROR,
NM_DBUS_NO_DIALUP_ERROR, NM_DBUS_NO_NETWORKS_ERROR,
NM_DBUS_NO_ACTIVE_DEVICE_ERROR, NM_DBUS_NO_ACTIVE_NET_ERROR errors and
NM_DBUS_SIGNAL_STATE_CHANGE signal.
Remove NMNetworkStatus and NMActStage enums.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2345 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
