* src/NetworkManagerDevice.c
- Don't try to activate/bring up/down unsupported
devices
* src/NetworkManagerUtils.c
- Fix case of PCI ID checks for driver support levels
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@263 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* NetworkManager.h
- New file, now contains commonly used structures and bits
for the dbus API of NetworkManager
* Makefile.am
- Deliver NetworkManager.h to ${includedir}/NetworkManager
* src/NetworkManager.h
- Rename -> src/NetworkManagerMain.c
* Various fixups all around to use NetworkManager.h and new
src/NetworkManagerMain.h, remove redundant bits that got
moved into NetworkManager.h
* src/NetworkManagerDevice.[ch]
src/NetworkManagerUtils.[ch]
src/NetworkManagerPolicy.c
src/NetworkManagerDbus.c
- Whitelist wireless drivers, and blacklist some wired
drivers. Also blacklist cipsec and ethernet-over-usb
devices at this time (RH #135722, RH #135648)
- Don't leak unsupported devices out over dbus, or allow
them to be set as the active device. Skip over them
during automatic device picking
* test/nmclienttest.c
- Clean up the dbus code a lot
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@261 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c
- Add function to print out applet_state in a readable
manner
* src/NetworkManager.c
- (main): Don't segfault when nm_dbus_init() fails, we had
a left-over call to hal_shutdown() into which we passed NULL
* src/NetworkManagerAP.c
- (nm_ap_set_essid): Allow NULL essids
* src/NetworkManagerAPList.[ch]
- More use of nm_ap_list_[un]lock ()
- (nm_ap_list_get_ap_by_essid): don't warn when looking for a NULL
network/essid, just return nothing. Also skip over NULL
essid access points in the list when searching
- (nm_ap_list_get_ap_by_address): new function
- (nm_ap_list_update_network): set the access point's key source to
NULL when the key returned from NetworkManagerInfo is NULL or
of 0 length
- nm_ap_list_update_keys() -> nm_ap_list_update_properties(), and
copy timestamp over too
- (nm_ap_list_copy_essids_by_address): new function, attempt to
find the correct ESSID for a blank-essid access point by searching
through another list and matching access point MAC addresses
- (nm_ap_list_diff): exclude blank-essid access points from the diffs
* src/NetworkManagerDbus.c
- (nm_dbus_nm_set_active_device): deal with random networks the user
may specify. This is mainly for access points that don't
broadcast their essid. So if the user tells us to associate with
some random ESSID that's not in our access point list, we find
out if the access point does in fact exist (by attempting association
and then matching that access point's MAC address with the essid the
user gave us) and then we switch to it.
- (nm_dbus_devices_handle_request): don't add blank-essid access points
to the returned list of networks for the "getNetworks" method
* src/NetworkManagerDevice.[ch]
- Extra debugging info for link detection
- (nm_device_ap_list_get_ap_by_address): new function, return an AP
based on MAC address
- (nm_device_get_path_for_ap): ignore blank-essid access points
- (nm_device_wireless_network_exists): new function, find out whether
a random ESSID exists by attempting to associate with it
- (nm_device_do_normal_scan): allow blank-essid access points in our
device list as long as they have an AP MAC address we can use.
Also send WirelessNetwork[Dis]Appeared signals for non-active
devices too. Lets the applet update more frequently.
* src/backends/NetworkManagerGentoo.c
- Patch from: Robert Paskowitz
- Update backend code for Gentoo
- Implement nm_system_device_update_config_info ()
* test/nmclienttest.c
- (set_network_device): new function, takes a command-line argument
and tells NetworkManager to use that wireless network
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@222 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* TODO
- Remove bit about static IP address support
* src/NetworkManagerUtils.c
- (nm_spawn_process): Add some error reporting
* src/NetworkManagerDevice.c
- (nm_device_activation_configure_ip): hook up to the static config
routines in the backends
* src/backends/NetworkManagerRedHat.c
- (nm_system_device_update_config_info): use shvar.c routines to
parse the config file iformation, not our own
- (nm_system_device_setup_static_ip4_config): new function, based
heavily on 'ifup' script and 'ipcalc' tool code. Set up a device
with a static IP address and gateway
* src/backends/shvar.[ch]
- Parser (filched from initscripts package) for ifcfg-* files
* src/backends/NetworkManagerSystem.h
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerSlackware.c
- Stub nm_system_device_update_config_info() and nm_system_device_setup_static_ip4_config()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@212 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/no-networkmanager.png
panel-applet/Makefile.am
panel-applet/NMWirelessApplet.c
- Add a "NetworkManager not running" icon and use it
- Use new consolidated GConf keys rather than Preferred/Trusted
* TODO: update
* info-daemon/NetworkManagerInfo.c
info-daemon/NetworkManagerInfoDbus.[ch]
info-daemon/NetworkManagerInfoPassphraseDialog.c
- There are now no longer two separate lists of wireless networks,
but one list where each network is "trusted" or not trusted
- Add a "getNetworkTrusted" dbus method
- "WirelessNetworkUpdate" signal now sent rather than
"PreferredNetworkUpdate/TrustedNetworkUpdate" signals
- Start freeing some dbus errors (not completed yet)
* info-daemon/passphrase.glade
- Remove the "don't show" hints for pager and taskbar
- Add a title since its going to be in the taskbar
* src/NetworkManager.[ch]
src/NetworkManagerAPList.[ch]
- There are now no longer two separate lists of wireless networks,
but one list where each network is "trusted" or not trusted
* src/NetworkManagerAP.[ch]
- Add get/set "trusted" accessors and data bit
* src/NetworkManagerDbus.[ch]
- Add function to get "trusted" status of a network from NetworkManagerInfo
- Trap new WirelessNetworkUpdate signal rather than old separate signals
* src/NetworkManagerDevice.[ch]
- Add per-device config data (ip4 addr, gateway, netmask) and accessors
- (nm_device_new): Get device config from backend when initializing devices
- (nm_device_activation_worker): Split out device configuration on
activation to deal with static/dynamic IP differences, and try encryption
fallbacks on a device if the encryption method for the best AP is not good
- (nm_device_update_best_ap): convert to new consolidated access point lists from
NetworkManagerInfo, and copy over latest NMI info to best_ap when setting it
* src/NetworkManagerWireless.c
- libgcrypt code wasn't converting the MD5 digest to an ascii string, fix it
* src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSystem.h
- (nm_system_device_update_config_info): Add function to get device configuration
from system data in ifcfg-* files
* src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerSlackware.c
- Add stub functions for getting device configuration
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@131 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Remove 'debug' extern global from all files since we now
use syslog()
* src/NetworkManager.[ch]
- Break out routine that get the net.interface property from HAL,
removing that logic from nm_create_device_and_add_to_list()
- (nm_create_device_and_add_to_list): make this a bit more general so
it doesn't do the talking to HAL. Also add arguments to facilitate
the create of test devices.
- (nm_data_mark_state_changed): rename from nm_data_set_state_modified()
- (nm_data_new, main, nm_print_usage): add new argument "--enable-test-devices"
which makes NetworkManager listen for dbus commands to create test
devices, which have no backing hardware. Use when you're on a plane
for example, and/or forgot your wireless card at home. Test devices
_cannot_ be created unless NM is started with --enable-test-devices.
* src/NetworkManagerDbus.[ch]
- New "getLinkActive" method for devices
- New "setLinkActive" method for devices (only works on test devices)
- New "createTestDevice" method on NetworkManager object to create a test
device of a specified type (ie wired, wireless). UDI is created from
scratch, as is the interface name. Only works when NM is started with
--enable-test-devices switch.
- New "removeTestDevice" method on NetworkManager object which removes a
test device. Only works when NM is started with --enable-test-devices
* src/NetworkManagerDevice.[ch]
- Logic to facilitate test devices. Add variables to NMDevice struct to indicate
whether a device is a test device or not, and what its link status is.
- Deal with test devices in most functions. For those that work directly on hardware
special-case test devices.
- (nm_device_new): don't create a test device if test devices weren't enabled on the
command-line.
- (nm_device_update_link_active): split out logic for wired and wireless device link
checking to separate functions to facilitate test device link checking.
- (nm_device_set_enc_key): Since some drivers for wireless cards are daft and
don't make a distinction between System Authentication and Encryption
(namely Cisco aironet), we use Open System auth when setting a WEP key
on the card. We don't deal with Shared Key auth yet.
- (nm_device_activation_worker): split the activation cancel check logic out into
a separate routine nm_device_activation_cancel_if_needed()
- (nm_device_activation_signal_cancel): rename from nm_device_activation_cancel()
- (nm_device_fake_ap_list): Test wireless devices obviously cannot scan, so create
a list of fake access points that they can "see"
- (nm_device_is_test_device): return whether or not a device is a test device
* src/NetworkManagerPolicy.c
- (nm_policy_get_best_device): attempt to deal with wireless network selection,
previously if you "locked"/forced NM to use a wireless device but then
selected a wireless network for NM to use, it would switch to a wired device.
So, if the active device is wireless and it has a "forced" best AP, use it
if the "forced" best AP is still valid
- (nm_state_modification_monitor): deal with NULL best devices, for example
there were no usable network devices, or the last one was removed
* src/backends/NetworkManager*.c
- Deal with test devices, mostly just return success for operations like getting
a DHCP address
* test/nmtestdevices.c
- Test tool to create/remove/link-switch test devices
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@112 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAP.[ch]
- Add a "enc_method_good" member and accessors to an Access Point
to signal when we've found the correct encryption method
for an access point
- Add a "timestamp" member and accessors, remove "priority" member
and accessors (use timestamps instead)
- Rename "wep_key"->"enc_key"
- (nm_ap_get_enc_key_hashed): new, return the correct mangled key
for a specified encryption method using the access points
source encryption key/passphrase
* src/NetworkManagerAPList.c
- When updating a network with dbus, grab timestamp now instead of
priority
* src/NetworkManagerDBus.[ch]
- Add signal for "DeviceActivating"
- Switch priority->timestamp
* src/NetworkManagerDevice.c
- Change references of "wep_key" -> "enc_key" or "key"
- Signal DeviceActivating when starting activation
- When activating a wireless device, if the access point we are connecting
to is encrypted, and we have a source key, try to generate a mangled
key and use that (ie, generate real WEP key from a passphrase)
- Rework device activation to fallback to other encryption methods if
a previous one didn't work (ie, try mangling a key as a 104-bit passphrase
first, then if that doesn't work fall back to direct hex key).
- (nm_device_update_best_ap): fix a deadlock, and use timestamps instead of
priority. We now prefer the latest access point used, rather than using
a priority scheme
- (nm_device_do_normal_scan): make the encryption method "unknown" on access
points we've just discovered, and merge in correct info from the global
access point lists
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@68 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in
src/Makefile.am
src/NetworkManagerDevice.c
src/NetworkManager.c
src/NetworkManagerUtils.[ch]
src/backends/NetworkManagerSystem.h
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerGentoo.c
- Refactor system-specific code into separate backends for
each distribution
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@62 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* initscript/NetworkManager
- Check for /sbin/ip
- Do sysctl magic that network service does
- sleep 4s after start to allow network time to come up [hack]
* src/Makefile.am
src/NMLoadModules
- Load all network device kernel modules (hal doesn't know devices
are ethernet until the module is loaded, and therefore we don't know)
* src/NetworkManager.c
- (main): daemonize later, launch NMLoadModules to alert HAL of our
network devices, and bring up the loopback device explicitly
* src/NetworkManagerUtils.[ch]
- (nm_enable_loopback): new function
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@55 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/passphrase.glade
- Set window title to " "
* panel-applet/Makefile.am
panel-applet/keyring.png
- Deliver to correct place
* panel-applet/NMWirelessApplet.[ch]
- Add comments
- Remove applet->have_active_device as its no longer used
- (nmwa_load_theme): load keyring.png too
- (error_dialog): remove
- (show_warning_dialog): subsume functionality of error dialog too
- (nmwa_destroy, nmwa_new): create and dispose of an application-wide GConfClient
- (nmwa_handle_network_choice): add to deal with user clicking on an item from
the networks menu
- (nmwa_menu_item_activated): GtkMenuItem "activate" signal handler
- (nmwa_button_clicked, nmwa_setup_widgets): create and populate the menu on startup
and when we get broadcasts of changed wireless access points only, not when the
user clicks on the button to display the menu (too long of a wait)
- (nmwa_add_menu_item): Make active network bold, and place a keyring icon beside
networks that are encrypted
- (nmwa_dispose_menu, nmwa_menu_item_data_free): dispose of the data we place on each
menu item with g_object_set_data()
* panel-applet/NMWirelessAppletDbus.[ch]
- (nmwa_dbus_get_bool): add method to return boolean value from dbus message
- (nmwa_dbus_get_active_network): add (nmwa_dbus_get_string() wrapper to get active network)
- (nmwa_dbus_add_networks_to_menu): clean up, only show one instance of each ESSID in the menu
- (nmwa_dbus_set_network): force NetworkManager to use a particular network for wireless cards
- (nmwa_dbus_init, nmwa_dbus_filter): Trap network appear/disappear and device
activation/deactivation signals and rebuild the menu when they happen
* src/NetworkManager.c
- (main): use new nm_spawn_process() rather than system()
* src/NetworkManagerDbus.c
- (nm_dbus_devices_handle_request): don't compare AP structure addresses directly, but essids
instead. Since we can now force best_aps to stick around, the AP structure to which
dev->options.wireless.best_ap points to won't necessarily be in the device's device list
if a scan has happened since the best_ap was frozen. Also add "setNetwork" method
to freeze the best_ap.
* src/NetworkManagerDevice.[ch]
- (nm_device_activation_worker): Use new nm_spawn_process() call rather than system()
- (nm_device_*_best_ap): add freeze/unfreeze/get_frozen functions, and don't really update
the best_ap in nm_device_update_best_ap() if the best_ap is frozen AND in the device's
ap list
* src/NetworkManagerUtils.[ch]
- (nm_spawn_process): add replacement for system() usage
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@48 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfo.c:
- (main): clean up Seth's code style
* info-daemon/NetworkManagerInfoDbus.c:
- Use the more aptly-named path/service/interface constants from NetworkManager
- Don't return empty strings ("") as object paths ever, instead return errors
* panel-applet/NMWirelessApplet.c:
- Clean up Seth's code style
* src/NetworkManager.[ch]
- (nm_remove_device_from_list): remove anything having to do with pending_device
- (main, nm_print_usage): change --daemon=[yes|no] -> --no-daemon
* src/NetworkManagerAPList.[ch]
- Move Iter struct right above the iter functions to preserve opacity
- (nm_ap_list_remove_ap): implement
- (nm_ap_list_update_network): deal with errors returned from nm_dbus_get_network_priority(),
remove AP if NetworkManagerInfo doesn't know anything about it
- (nm_ap_list_diff): user NMAPList iterators
- (nm_ap_list_print_members): implement debugging function
* src/NetworkManagerDbus.[ch]
- (nm_dbus_nm_get_active_device): remove anything to do with pending_device
- (nm_dbus_get_user_key_for_network): remove DBusPendingCall stuff (unused),
and move the actual key setting stuff into NetworkManagerDevice.c
- (nm_dbus_get_network_priority): return -1 now on errors
- (nm_dbus_nmi_filter): fix strcmp() error that caused PreferredNetworkUpdate signals to
get lost, and force the active device to update its "best" ap when AP lists change
- (nm_dbus_nm_message_handler): Update conditions for returning "connecting" for a "status"
method call due to pending_device member removal
* src/NetworkManagerDevice.[ch]
- Move NMDevice structure to the top
- Add a wireless scan mutex and a best_ap mutex to the Wireless Options structure
- Remove Pending Action stuff from everywhere
- (nm_device_activation_*): We now "begin" activation and start a thread to do the
activation for us. This thread blocks until all conditions for activation have
been met (ie for wireless devices, we need a valid WEP key and a "best" ap), and
then setup up the interface and runs dhclient. We have to do this because there
is no guaruntee how long dhclient takes, and while we are blocking on it, we cannot
run our main loop and respond to dbus method calls or HAL device removals/inserts
- (nm_device_set_user_key_for_network): Move logic here from NetworkManagerDbus.c so we
can tell nm_device_activation_worker() that we've got a key
- (nm_device_*_best_ap): lock access to best_ap member of Wireless Options structure
- (nm_device_get_path_for_ap): dumb it down so the list doesn't lock against itself when
diffing (AP appear/disappear signal functions make sure the AP is actually in the device's
list)
- (nm_device_update_best_ap): move logic from nm_wireless_is_ap_better() here
* src/NetworkManagerPolicy.c
- Remove anything to do with pending_device
- Adjust device activation to deal with activation-in-worker-thread
* src/NetworkManagerUtils.c
- Clean up locking debugging a bit
* src/NetworkManagerWireless.[ch]
- (nm_wireless_is_ap_better): remove, stick logic in nm_device_update_best_ap(). This function
was badly named and is better as a device function
* panel-applet/.cvsignore: add
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@46 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/Makefile.am
- Turn on warnings
* src/NetworkManager.c
- nm_create_device_and_add_to_list(): call nm_device_deactivate() rather
that doing the deactivation ourselves
- Cancel an pending actions on a device if its being removed
- Break up link state checking a bit, make non-active wireless cards
deactivated to save power
- Remove unused variables
* src/NetworkManager.h
- Add support for "pending" device
* src/NetworkManagerAP.h
src/NetworkManagerAP.c
- Add support for determining whether and AP has encryption enabled or not
- AP address is now "struct ether_addr" rather than a string
* src/NetworkManagerDbus.h
src/NetworkManagerDbus.c
- Add signal NeedKeyForNetwork, method SetKeyForNetwork (testing only)
- Changes for AP address from struct ether_addr->string
* src/NetworkManagerDevice.h
src/NetworkManagerDevice.c
- Remove unused variables, fix warnings
- Add support for Pending Actions (things that block a device from being "active"
until they are completed).
- First pending action: Get a WEP key from the user
- Add nm_device_is_wire[d|less](), rename nm_device_is_wireless()
- Clean up explicit testing of dev->iface_type to use nm_device_is_wireless()
- Update wireless link checking to try to determine if the AP we are associated
with is correct, but the WEP key we are using is just wrong. If its wrong,
trigger the GetUserKey pending action on the device
- If dhclient can't get an IP address, it brings the device down. Bring it back
up in that case, otherwise we can't scan or link-check on it
- Add IP address change notifications at appropriate points (still needs some work)
- Add nm_device_need_ap_switch(), checks whether we need to switch access points or not
* src/NetworkManagerPolicy.h
src/NetworkManagerPolicy.c
- Split out "best" access point determiniation into separate function
- Make device activation 2-stage: first the device is pending, then
in the next iteration through it becomes "active" unless it has
pending actions
* src/NetworkManagerUtils.h
src/NetworkManagerUtils.c
- Clean up unused variables and warnings
- Wrap our debug macros in {} to prevent possible confusion
* src/NetworkManagerWireless.c
- Forgot to return current best priority, which lead to last available AP always
being chosen no matter what its priority was. Corrected.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@15 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManager.c
- Add IPv4 address update for active device during link state check
- Don't allow wireless cards to be powered up when they are not the
active device
* src/NetworkManagerDbus.c
src/NetworkManagerDbus.h
- Add DBUS IPv4 address change signal
- Add DBUS IPv4 address get method for devices
* src/NetworkManagerDevice.c
- Make setting the WEP key actually work
- Move IP address get/set/update stuff here, per-device
- Power down/bring down wireless device when deactivated
- For scanning wireless devices, if first scan returned ENODATA, try again
* src/NetworkManagerPolicy.c
- Only set the WEP key for an allowed access point if there is one.
We were setting it to be blank if one wasn't specified.
* src/NetworkManagerUtils.h
src/NetworkManagerUtils.c
- Move the IP address stuff to NetworkManagerDevice.c
* dispatcher-daemon/NetworkManagerDispatcher.c
- Add device IPv4 address change notification stuff
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@13 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dispatcher-daemon/NetworkManagerDispatcher.c
- A bit more descriptive state message
- Don't segfault when reading directory
* src/NetworkManager.h
- Remove NMData desired_ap member, its now
per-device rather than global
* src/NetworkManager.c
- Remove references to desired_ap
- Move the allowed AP list refresh stuff into a thread
* src/NetworkManagerDevice.c
src/NetworkManagerDevice.h
- Each wireless device now has a "best ap"
- Make device activate/deactivate functions per-device
- Make wireless scanning per-device
- Add IPv4 address discover functions, stub IPv6 ones
- Move ethernet address validation functions to NetworkManagerUtils.c
- Add wireless access point accessor function
- Get/Set functions for "best ap"
* src/NetworkManagerPolicy.c
- Move activate/deactivate stuff into NetworkManagerDevice.c, per-device
- Deal with per-device "best ap" rather than data->desired_apa
- Implement allowed access point worker thread
- Add nm_policy_essid_is_allowed() function
* src/NetworkManagerUtils.c
src/NetworkManagerUtils.h
- Add nm_ethernet_address_is_valid() function
- Add IPv4/IPv6 address get functions
* src/NetworkManagerWireless.c
src/NetworkManagerWireless.h
- Move scanning stuff into NetworkManagerDevice.c, per-device
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@12 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
