Building the man pages via xsltproc requires "docbook.xsl"
which is part of docbook.
Previously, we would build the man pages solely based on
"--enable-introspection", which checks for the presence of
xsltproc, but not docbook. This can lead to build failure
when docbook is not available, but "--enable-introspection"
is given.
Instead of adding yet another configure option to fine-tune
and say "--with-docbook --disable-gtk-doc", just simplify it.
Now, documentation (both man pages and setting docs) will be generated
with "--enable-gtk-doc" and "--enable-introspection".
If the documentation is not about to be generated, pre-generated docs
will be installed if they are available. That is commonly the case
with a source tarball, but not with a git checkout.
Finally, if documentation is nither generated nor pre-generated,
no documentation will be installed *duh*.
This removes the possibility to treat man pages separate from settings
docs. Now you either generate both, install both pre-generated, or don't
get any of them.
https://bugzilla.gnome.org/show_bug.cgi?id=778551
- `make dist` requires --enable-gtk-doc --enable-introspection --with-libnm-glib
- --enable-gtk-doc requires --enable-introspection
- --with-nmcli requires either --enable-introspection or pregenerated
settings-docs.c files from the dist tarball. It does not require
--enable-gtk-doc.
There is a bit of a problem in that --enable-introspection requires
now xsltproc. However, gobject-introspection does itself not depend
on xsltproc. So, more correct might be a special --enable-doc argument,
that combines --enable-introspection --with-xsltproc. Anyway, that
seems to make it more complicated then it already is so just implicitly
(and surprisingly?) require xsltproc with --enable-introspection.
https://bugzilla.gnome.org/show_bug.cgi?id=775003
This makes it easier to install the files with proper names.
Also, it makes the makefile rules slightly simpler.
Lastly, the documentation is now generated into docs/api, which makes it
possible to get rid of the awkward relative file names in docbook.
Otherwise the types links would be dangling or resolved to slightly
irrelevant documentation in libnm or completely irrelevant documentation
in libnm-util.
May use a lot of improvement (actually documenting the names and
objects that use the interfaces in question), but at least this looks a
lot better on developer.gnome.org.
Even Fedora is no longer shipping the WiMAX SDK, so it's likely we'll
eventually accidentally break some of the code in src/devices/wimax/
(if we haven't already). Discussion on the list showed a consensus for
dropping support for WiMAX.
So, remove the SDK checks from configure.ac, remove the WiMAX device
plugin and associated manager support, and deprecate all the APIs.
For compatibility reasons, it is still possible to create and save
WiMAX connections, to toggle the software WiMAX rfkill state, and to
change the "WIMAX" log level, although none of these have any effect,
since no NMDeviceWimax will ever be created.
nmcli was only compiling in support for most WiMAX operations when NM
as a whole was built with WiMAX support, so that code has been removed
now as well. (It is still possible to use nmcli to create and edit
WiMAX connections, but those connections will never be activatable.)
When compiling NetworkManager with --enable-gtk-doc outside the
source tree, the generated documents are slightly different from
those generated in tree. This patch fixes that missed COPYING file in
$(top_builddir) and adds $(top_builddir)/libnm-util to DOC_SOURCE_DIR.
https://bugzilla.gnome.org/show_bug.cgi?id=742139
Signed-off-by: You-Sheng Yang <vicamo@gmail.com>
Since libnm-core secret-flags properties are now enum-typed rather
than just being uints, we can now actually recognize them when
generating docs, rather than just assuming that every property whose
name ends in '-flags', but isn't in NMSettingDcb, is a secret-flags
property.
Move the settings/plugins doc generation from libnm-util to
libnm-core, since libnm-util isn't being updated for all new
properties.
With this commit, the keyfile and ifcfg-rh documentation is basically
unchanged, except that deprecated properties are now gone, and new
properties have been added, and the sections are in a different order.
(generate-plugin-docs.pl just outputs the settings in Makefile order,
and they were unsorted in libnm-util, but are sorted in libnm-core).
The settings documentation used for nm-settings.5, the D-Bus API docs,
and the nmcli help is changed a bit more at this point, and mostly for
the worse, since the libnm-core setting properties don't match up with
the D-Bus API as well as the libnm-util ones do. To be fixed...
(I also removed the "plugins docs" line in each plugin docs comment
block while moving them, since those blocks will be used for more than
just plugins soon, and it's sort of obvious anyway.)
docs/api/settings-spec.xml was accidentally not getting disted,
because gtk-doc.make explicitly removes all DISTCLEANFILES from
distdir. However, it doesn't actually make sense for the settings docs
files to be in DISTCLEANFILES anyway; they were put there rather than
CLEANFILES (IIRC) so that "make clean" in a tarball build wouldn't
delete them and break things. But the right fix is to just make them
only be in CLEANFILES when BUILD_SETTING_DOCS is true, and not ever
get deleted otherwise.
Also adjust the build rules to ensure that the generated docs don't
get rebuilt in tarball builds, since that can cause problems when
building from a read-only source tree, etc.
Meanwhile, in an unrelated but also fatal bug, configure.ac's check
for if the generated docs were already present never got updated for
the cli/src -> clients/cli move, and so even if we had been disting
settings-spec.xml, configure would still think that the tarball didn't
have all of the generated docs in it, so SETTING_DOCS_AVAILABLE would
be set false and none of the generated docs would get used.
https://bugzilla.gnome.org/show_bug.cgi?id=740035
Certain build configurations (like --enable-gtk-doc
--disable-introspection) were broken with respect to nm-setting-docs.
Fix this. Also, we don't require just gobject-introspection, we need
pygobject specifically as well.
dist tarballs shouldn't ever be released without the documentation,
and this allows us to build the tarballs with pre-generated docs
that get installed on the end system, but don't need to be built
there. So the end system doesn't need gtk-doc installed, only
the dist system does.
https://bugzilla.gnome.org/show_bug.cgi?id=700093
"./autogen.sh --enable-doc && make" produced this error:
warning: failed to load external entity "../settings-spec.xml"
../network-manager-docs.xml:57: element include: XInclude error : could not load ../settings-spec.xml, and no fallback was found
Removing settings-spec.xml from $(content_files) made the file non-DISTed but it
also removed the file as a dependency for html-build.stamp that also runs
cd html && gtkdoc-mkhtml $$mkhtml_options $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE)
and $(DOC_MAIN_SGML_FILE) includes settings-spec.xml.
Fix that by making $(DOC_MAIN_SGML_FILE) dependent on setting-spec.xml.
The generated settings-spec.xml should not be DIST-ed because it's
regenerated every time libnm-util changes. That meants it gets
rebuilt during 'make' even from a dist tarball. Thus, it shouldn't
be part of the dist tarball itself.
In addition, settings-spec.html shouldn't be included in
$(content_files) becuase this is added to EXTRA_DIST by gtk-doc.make.
Since generate-settings-spec.c the move from docs/api/ to tools/,
this started breaking distcheck even though the original Makefile
rules were wrong too.
The refentry xml is used to generate manual page with settings description.
The invocation is:
generate-settings-spec <type> <output file> [<type> <output file>]
where <type> is "book" or "refentry"
Use --enable-doc and --enable-tests instead of --with-docs and
--with-tests. This is consistent with other features and with
--enable-gtk-doc option. Support current variants as fallback.
Don't build tests unless --enable-tests is specified.
Since all.xml is a built file these days, and will contain paths
relative to $(top_srcdir)/introspection even though it's not in
that directory, it seems we need to clue xsltproc into where the
other API XML files really are.
Apparently sometimes when doing the distcheck the generator can't
open the file for writing (gets ENOACCESS) presumably because there's
already a file there that's read-only. So remove any existing
settings spec before regenerating.
gtk-doc removes the 'html' directory as part of the build process
so we need to have spec.html generation depend on the gtk-doc html
target. Also, fix up the paths to make sure the generated spec.html
gets copied into the final 'html' directory.
