No need to create a separate NMUdevClient instance for all devices.
Instead, have one "struct udev" instance in NMClient and pass
it down during object construction.
Note that the reason tracking starts as soon as the object exists (which
is immediately after GDBusObject is created), not when the asynchronous
NMObject initialization finishes. That is so that we the reason changes
in between are not lost.
The vpn-connection should probably be doing the same.
Add support for creating dummy devices. This commit adds a D-Bus
interface 'org.freedesktop.NetworkManager.Device.Dummy' which is used
primarily for determining the device type but does not carry any
properties.
This makes it easier to install the files with proper names.
Also, it makes the makefile rules slightly simpler.
Lastly, the documentation is now generated into docs/api, which makes it
possible to get rid of the awkward relative file names in docbook.
Apparently, the client is used by the services we depend on (firewalld),
and an attempt to start the service would deadlock them.
This was an accidental change anyway.
Related firewalld change: https://github.com/t-woerner/firewalld/pull/171
This speeds up the initial object tree load significantly. Also, it
reduces the object management complexity by shifting the duties to
GDBusObjectManager.
The lifetime of all NMObjects is now managed by the NMClient via the
object manager. The NMClient creates the NMObjects for GDBus objects,
triggers the initialization and serves as an object registry (replaces
the nm-cache).
The ObjectManager uses the o.fd.DBus.ObjectManager API to learn of the
object creation, removal and property changes. It takes care of the
property changes so that we don't have to and lets us always see a
consistent object state. Thus at the time we learn of a new object we
already know its properties.
The NMObject unfortunately can't be made synchronously initializable as
the NMRemoteConnection's settings are not managed with standard
o.fd.DBus Properties and ObjectManager APIs and thus are not known to
the ObjectManager. Thus most of the asynchronous object property
changing code in nm-object.c is preserved. The objects notify the
properties that reference them of their initialization in from their
init_finish() methods, thus the asynchronously created objects are not
allowed to fail creation (or the dependees would wait forever). Not a
problem -- if a connection can't get its Settings, it's either invisible
or being removed (presumably we'd learn of the removal from the object
manager soon).
The NMObjects can't be created by the object manager itself, since we
can't determine the resulting object type in proxy_type() yet (we can't
tell from the name and can't access the interface list). Therefore the
GDBusObject is coupled with a NMObject later on.
Lastly, now that all the objects are managed by the object manager, the
NMRemoteSettings and NMManager go away when the daemon is stopped. The
complexity of dealing with calls to NMClient that would require any of
the resources that these objects manage (connection or device lists,
etc.) had to be moved to NMClient. The bright side is that his allows
for removal all of the daemon presence tracking from NMObject.
Backported symbols only make sense for libnm itself, not for
libnm-core which is statically linked with NetworkManager and
nm-ifcace-helper. Declaring the symbols in libnm-core, means
that NetworkManager binary also contains them, although there
are not used.
Move them to libnm.
- All internal source files (except "examples", which are not internal)
should include "config.h" first. As also all internal source
files should include "nm-default.h", let "config.h" be included
by "nm-default.h" and include "nm-default.h" as first in every
source file.
We already wanted to include "nm-default.h" before other headers
because it might contains some fixes (like "nm-glib.h" compatibility)
that is required first.
- After including "nm-default.h", we optinally allow for including the
corresponding header file for the source file at hand. The idea
is to ensure that each header file is self contained.
- Don't include "config.h" or "nm-default.h" in any header file
(except "nm-sd-adapt.h"). Public headers anyway must not include
these headers, and internal headers are never included after
"nm-default.h", as of the first previous point.
- Include all internal headers with quotes instead of angle brackets.
In practice it doesn't matter, because in our public headers we must
include other headers with angle brackets. As we use our public
headers also to compile our interal source files, effectively the
result must be the same. Still do it for consistency.
- Except for <config.h> itself. Include it with angle brackets as suggested by
https://www.gnu.org/software/autoconf/manual/autoconf.html#Configuration-Headers
Rather than randomly including one or more of <glib.h>,
<glib-object.h>, and <gio/gio.h> everywhere (and forgetting to include
"nm-glib-compat.h" most of the time), rename nm-glib-compat.h to
nm-glib.h, include <gio/gio.h> from there, and then change all .c
files in NM to include "nm-glib.h" rather than including the glib
headers directly.
(Public headers files still have to include the real glib headers,
since nm-glib.h isn't installed...)
Also, remove glib includes from header files that are already
including a base object header file (which must itself already include
the glib headers).
config.h should be included from every .c file, and it should be
included before any other include. Fix that.
(As a side effect of how I did this, this also changes us to
consistently use "config.h" rather than <config.h>. To the extent that
it matters [which is not much], quotes are more correct anyway, since
we're talking about a file in our own build tree, not a system
include.)
Make NMClient disconnect from the NMManager and NMRemoteSettings
signals when disposing, in case they outlive the NMClient (which
shouldn't happen, but...)
libnm mostly used GPtrArrays in its APIs, except that arrays of
connections were usually GSLists. Fix this and make them GPtrArrays
too (and rename nm_client_list_connections() to
nm_client_get_connections() to match everything else).
Consolidate NMClientError and NMObjectError (such that there is now
only one libnm-API-specific error domain). In particular, merge
NM_CONNECTION_ERROR_CONNECTION_REMOVED with
NM_OBJECT_ERROR_OBJECT_CREATION_FAILURE as the new
NM_CONNECTION_ERROR_OBJECT_CREATION_FAILED.
Also make object_creation_failed() be a plain method rather than a
signal, since there's no reason for anyone to be connecting to it on
another object. And remove its GError argument because the subclass
can just create its own more-specific error.
nm_client_new_async() got broken in the NMManager split. Fix it, and
use it from one of the tests in test-nm-client to make sure it's
getting tested in the future.
Add a single function to check if NM is running and set a GError if
not, then use it as appropriate.
Don't bother to check if NM is running in get_*() functions if
nm_running_changed_cb() would have reset the field anyway (and fix
that up to reset a few more fields).
Rearrange the NMClient function declarations and the functions
themselves, and group them into "general", "device", and "active
connection" sections.
No code changes, just moving things around.
nm_client_activate_connection() and
nm_client_add_and_activate_connection() return when the activation has
*started*, not when it *finishes*. Clarify this a bit more in the
libnm docs, and copy that clarification to libnm-glib as well.
https://bugzilla.gnome.org/show_bug.cgi?id=736233
Make enum- and flags-valued properties use GParamSpecEnum and
GParamSpecFlags, for better introspectability/bindability.
This requires no changes outside libnm-core/libnm since the expected
data size is still the same with g_object_get()/g_object_set(), and
GLib will internally convert between int/uint and enum/flags GValues
when using g_object_get_property()/g_object_set_property().
Add the missing variant in most places in the API where previously
there was either only a synchronous version or only an asynchronous
version.
There is not yet a synchronous nm_client_activate_connection(),
nm_client_add_and_activate_connection(), or
nm_remote_settings_add_connection(), because the existing async code
depends on waiting for other asynchronous events, so making them run
synchronously is slightly more complicated. But these APIs can be
added later.
Make synchronous APIs take GCancellables, and make asynchronous APIs
use GAsyncReadyCallbacks and have names ending in "_async", with
"_finish" functions to retrieve the results.
Also, make nm_client_activate_connection_finish(),
nm_client_add_and_activate_finish(), and
nm_remote_settings_add_connection_finish() be (transfer full) rather
than (transfer none), because the refcounting semantics become
slightly confusing in some edge cases otherwise.
Port libnm-core/libnm to GDBus.
The NetworkManager daemon continues to use dbus-glib; the
previously-added connection hash/variant conversion methods are now
moved to NetworkManagerUtils (along with a few other utilities that
are now only needed by the daemon code).
In preparation for porting to GDBus, make nm_connection_to_dbus(),
etc, represent connections as GVariants of type 'a{sa{sv}}' rather
than as GHashTables-of-GHashTables-of-GValues.
This means we're constantly converting back and forth internally, but
this is just a stepping stone on the way to the full GDBus port, and
all of that code will go away again later.
Add _nm_object_class_add_interface(), for declaring that a class
implements a particular interface, and then have NMObject create the
corresponding proxies itself. (The subclass can get a copy with
_nm_object_get_proxy() if it needs it for something).
(In GDBus, creating a proxy is a heavier operation than in dbus-glib,
so we'll need to create the proxies asynchronously. Moving the
creation to NMObject makes that easier since we can do it as part
of the existing init/init_async.)
libnm functions that return GPtrArrays of objects had a rule that if
the array was empty, they would return NULL rather than a 0-length
array. As it turns out, this is just a nuisance to clients, since in
most places the code for the non-empty case would end up doing the
right thing for the empty case as well (and where it doesn't, we can
check "array->len == 0" just as easily as "array == NULL"). So just
return the 0-length array instead.
Use G_TYPE_PTR_ARRAY for GPtrArray-of-NMObject-valued properties,
because it has better introspection/bindings support.
As with the strdict change in libnm-core, we need to manually copy the
array in get_property() implementations, to preserve the standard
semantics that get_property() returns a copy, not the internal array.
(This patch also changes those properties so that they are always
non-NULL until dispose(); previously some of them could be either NULL
or 0-length at different times.)
