For the per-connection settings "ethernet.cloned-mac-address"
and "wifi.cloned-mac-address", and for the per-device setting
"wifi.scan-rand-mac-address", we may generate MAC addresses using
either the "random" or "stable" algorithm.
Add new properties "generate-mac-address-mask" that allow to configure
which bits of the MAC address will be scrambled.
By default, the "random" and "stable" algorithms scamble all bits
of the MAC address, including the OUI part and generate a locally-
administered, unicast address.
By specifying a MAC address mask, we can now configure to perserve
parts of the current MAC address of the device. For example, setting
"FF:FF:FF:00:00:00" will preserve the first 3 octects of the current
MAC address.
One can also explicitly specify a MAC address to use instead of the
current MAC address. For example, "FF:FF:FF:00:00:00 68:F7:28:00:00:00"
sets the OUI part of the MAC address to "68:F7:28" while scrambling
the last 3 octects.
Similarly, "02:00:00:00:00:00 00:00:00:00:00:00" will scamble
all bits of the MAC address, except clearing the second-least
significant bit. Thus, creating a burned-in address, globally
administered.
One can also supply a list of MAC addresses like
"FF:FF:FF:00:00:00 68:F7:28:00:00:00 00:0C:29:00:00:00 ..." in which
case a MAC address is choosen randomly.
To fully scamble the MAC address one can configure
"02:00:00:00:00:00 00:00:00:00:00:00 02:00:00:00:00:00".
which also randomly creates either a locally or globally administered
address.
With this, the following macchanger options can be implemented:
`macchanger --random`
This is the default if no mask is configured.
-> ""
while is the same as:
-> "00:00:00:00:00:00"
-> "02:00:00:00:00:00 02:00:00:00:00:00"
`macchanger --random --bia`
-> "02:00:00:00:00:00 00:00:00:00:00:00"
`macchanger --ending`
This option cannot be fully implemented, because macchanger
uses the current MAC address but also implies --bia.
-> "FF:FF:FF:00:00:00"
This would yields the same result only if the current MAC address
is already a burned-in address too. Otherwise, it has not the same
effect as --ending.
-> "FF:FF:FF:00:00:00 <MAC_ADDR>"
Alternatively, instead of using the current MAC address,
spell the OUI part out. But again, that is not really the
same as macchanger does because you explictly have to name
the OUI part to use.
`machanger --another`
`machanger --another_any`
-> "FF:FF:FF:00:00:00 <MAC_ADDR> <MAC_ADDR> ..."
"$(printf "FF:FF:FF:00:00:00 %s\n" "$(sed -n 's/^\([0-9a-fA-F][0-9a-fA-F]\) \([0-9a-fA-F][0-9a-fA-F]\) \([0-9a-fA-F][0-9a-fA-F]\) .*/\1:\2:\3:00:00:00/p' /usr/share/macchanger/wireless.list | xargs)")"
This allows the user to disable MAC address randomization during
scanning for Wi-Fi networks, which is done by default.
For one, this allows the user to disable the randomization for whatever
reason.
Also, together with configuring the per-connection setting
wifi.cloned-mac-address=preserve, this allows to disable NetworkManager
to modify the MAC address of the interface. This may allow the user
to set the MAC address outside of NetworkManager without NetworkManager
interfering.
'wireless.mac-address-randomization' broke 'wireless.cloned-mac-address',
because we would always set 'PreassocMacAddr=1'. The reason is that
supplicant would set 'wpa_s->mac_addr_changed' during scanning, and
later during association it would either set a random MAC address or
reset the permanent MAC address [1].
Anyway, 'wireless.mac-address-randomization' conflicts with
'wireless.cloned-mac-address'. Instead of letting supplicant set the
MAC address, manage the MAC addresses entirely from NetworkManager.
Supplicant should not touch it.
[1] https://w1.fi/cgit/hostap/tree/wpa_supplicant/wpa_supplicant.c?id=f885b8e97cf39b56fe7ca6577890f2d20df7ae08#n1663
Extend the "ethernet.cloned-mac-address" and "wifi.cloned-mac-address"
settings. Instead of specifying an explicit MAC address, the additional
special values "permanent", "preserve", "random", "random-bia", "stable" and
"stable-bia" are supported.
"permanent" means to use the permanent hardware address. Previously that
was the default if no explict cloned-mac-address was set. The default is
thus still "permanent", but it can be overwritten by global
configuration.
"preserve" means not to configure the MAC address when activating the
device. That was actually the default behavior before introducing MAC
address handling with commit 1b49f941a6.
"random" and "random-bia" use a randomized MAC address for each
connection. "stable" and "stable-bia" use a generated, stable
address based on some token. The "bia" suffix says to generate a
burned-in address. The stable method by default uses as token the
connection UUID, but the token can be explicitly choosen via
"stable:<TOKEN>" and "stable-bia:<TOKEN>".
On a D-Bus level, the "cloned-mac-address" is a bytestring and thus
cannot express the new forms. It is replaced by the new
"assigned-mac-address" field. For the GObject property, libnm's API,
nmcli, keyfile, etc. the old name "cloned-mac-address" is still used.
Deprecating the old field seems more complicated then just extending
the use of the existing "cloned-mac-address" field, although the name
doesn't match well with the extended meaning.
There is some overlap with the "wifi.mac-address-randomization" setting.
https://bugzilla.gnome.org/show_bug.cgi?id=705545https://bugzilla.gnome.org/show_bug.cgi?id=708820https://bugzilla.gnome.org/show_bug.cgi?id=758301
`man nm-settings` says about ethernet.mac-address:
If specified, this connection will only apply to the Ethernet device
whose permanent MAC address matches.
Using the current, possibly non-permanent MAC address doesn't really
make sense.
Also, NM_DEVICE_HW_ADDRESS used to be writable and was set by NMDeviceBt
to the bdaddr. That is wrong, because bdaddr should not be the current
address, but the permanent one.
NetworkManager.conf already contains several per-device settings,
that is, settings that have a device-spec as argument.
main.ignore-carrier
main.no-auto-default
main.assume-ipv6ll-only
keyfile.unmanged-devices
Optimally, these settings should be moved to the new [device*]
section.
For now, only move main.ignore-carrier there. For the others
it may not make sense to do so:
- main.no-auto-default: is already merged with internal state
from /var/lib/NetworkManager/no-auto-default.state. While
NMConfig's write API would be fine to also persist and merge
the no-auto-default setting, we'd still have to read the old
file too. Thus, deprecating this setting gets quite cumbersome
to still handle the old state file.
Also, it seems a less useful setting to configure in the
global configuration aside setting main.no-auto-default=*.
- main.assume-ipv6ll-only: one day, I hope that we no longer
assume connections at all, and this setting becomes entirely
obsolete.
- keyfile.unmanged-devices: this sets NM_UNMANAGED_USER_SETTINGS,
which cannot be overruled via D-Bus. For a future device.managed
setting we want it it to be overwritable via D-Bus by an explicit
user action. Thus, a device.managed property should have a different
semantic, this should be more like a device.unmanaged-force setting,
which could be done.
Add a new [device*] section to NetworkManager.conf. This works similar
like the default connection settings in [connection*].
This will allow us to express per-device configuration in NetworkManager.conf
in our familar style.
Later, via NMConfig's write API it will be possible to make settings
accessible via D-Bus and persist them in NetworkManager-intern.conf.
This way, the user can both edit configuration snippets and modify
them via D-Bus, and also support installing default configuration
from the package.
In a way, a [device*] setting is similar to networkd's link files.
The match options is all encoded in the match-device specs.
One difference is, that the resulting setting can be merged together
by multiple section by partially overwriting them. This makes it
more flexible and allows for example to drop a configuration snippet
that only sets one property, while the rest can be merged from different
snippets.
It allows us to clean up the nmcli "c add" section considerably.
We list the old-fashioned aliases in a separate section that applies to both
"nmcli c add" and "nmcli c modify".
The section is now nicely cross-linked with nm-settings in HTML
rendering.
This improves the HTML rendering.
But it also causes a lot of non-resolvable linkends warning when rendering a
separate manual pages into roff/mman. The messages are harmless, but still
a bit ugly.
The logging domain VPN_PLUGIN controlls logging of the VPN plugins.
Especially at verbose levels <debug> and <trace>, the plugins might
reveal sensitive information in the logging.
Thus, this level should not be enabled by a
$ nmcli logging general level DEBUG domains ALL
It should only be enabled when requested explicitly.
$ nmcli logging general level DEBUG domains ALL,VPN_PLUGIN:DEBUG
Previously, the special level VPN_PLUGIN was entirely excluded from
ALL and DEFAULT domains and it was entirely disabled by default. That
is however to strict, as it completely silences the VPN plugins by
defult. Now, enable them by default up to level INFO.
VPN plugins should take care that they don't reveal sensitive
information at levels <info> (LOG_NOTICE) and higher (less verbose).
For more verbose levels they may print passwords, but that should
still be avoided as far as possible.
Until before 1.2.0, NetworkManager would always write resolv.conf as file, but
if /etc/resolv.conf was a symlink, it would follow the link instead of
replacing it with a file ([1], [2]).
With 1.2.0, we initially dropped that behavior and added a new 'rc-manager=none'
which writes resolv.conf to /var/run/NetworkManager and symlinks resolv.conf [3].
In case resolv.conf being already a symlink to another target, it would
not be replaced [4].
Later, we added 'rc-manager=file', which always writes /etc/resolv.conf as
file [5].
With 1.4.0, we will rename 'rc-manager=none' to 'rc-manager=symlink' [6].
This commit now fixes 'rc-manager=file' to restores the pre-1.2 behavior
and follow symlinks.
[1] 5761e328b8
[2] https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/324233
[3] 4805be2ed2
[4] 583568e12f
[5] 288799713d
[6] cd6a469668https://github.com/NetworkManager/NetworkManager/pull/7
Support 3 new flags for Reload:
- 0x01 (CONF): reload the configuration from disk
- 0x02 (DNS_RC): write DNS configuration to resolv.conf
- 0x04 (DNS_FULL): restart DNS plugin
Omitting all flags is the same as reloading everything, thus SIGHUP.
Add new Reload D-Bus command to reload NetworkManager configuration.
For now, this is like sending SIGHUP to the process. There are several
advantages here:
- it is guarded via PolicyKit authentication while signals
can only be sent by root.
- the user can wait for the reload to be complete instead of sending
an asynchronous signal. For now, we operation completes after
nm_config_reload() returns, but later we could delay the response
further until specific parts are fully reloaded.
- SIGHUP reloads everything including re-reading configuration from
disk while SIGUSR1 reloads just certain parts such as writing out DNS
configuration anew.
Now, the Reload command has a flags argument which is more granular
in selecting parts which are to be reloaded. For example, via
signals the user can:
1) send SIGUSR1: this writes out the DNS configuration to
resolv.conf and possibly reloads other parts without
re-reading configuration and without restarting the DNS plugin.
2) send SIGHUP: this reloads configuration from disk,
writes out resolv.conf and restarts the DNS plugin.
There is no way, to only restart the DNS plugin without also reloading
everything else.
This logging domain will be used to enable debugging of the VPN plugins.
However, the plugins might expose sensitive data in this mode, so exclude
the new domain from "LOGD_ALL".
Downstream might want to choose a different default value for
main.rc-manager setting (and it can does so, by compiling with
explicit resolvconf or netconfig support).
Make the default configurable at build-time and also embed it into
the manual page of "NetworkManager.conf".
https://bugzilla.redhat.com/show_bug.cgi?id=1337222
When performing NM package upgrade the new version of nmcli will be immediately
available while NM daemon will not, as it would not restart in order to avoid
to disrupt connectivity. This could create issues with tools leveraging
on nmcli output (till reboot). As apart from this case it is very unlikely
that a user can have this nmcli / NM daemon version mismatch situation,
the check could cause more harm than benefit in real user case
scenarios.
https://bugzilla.redhat.com/show_bug.cgi?id=1291785
The following settings are effectively identical:
dns=none,rc-manager=*any*
dns=none,rc-manager=unmanaged
dns=default,rc-manager=unmanaged
The new setting is only there for completeness and only
makes sense for a dns plugin.
We already have "rc-manager=file", rename "rc-manager=none" to "symlink"
because that better describes what it is actually doing. Of course, the
old name is still accepted.
Otherwise we fail since they don't exist. We have to carefully
implement an "or" condition for the cases of having prebuilt manpages
in a tarball, vs actually building them from source.
This way it's consistently used across all manual page without a need
for XSL templating.
Also, the entities file could in future possibly be used to template the
build-time configurables such as filesystem paths or bug tracker URL.
It's injected from the makefile, but not even used consistently or included in
the resulting render of manual page. Which is good, otherwise we'd have a
non-reproducible build with possible multilib conflicts if rendered around
midnight.
No functional change, just a readability improvement. No need to prefix
the variables with docbook_ and docbook_generated -- all manual pages
are generated from docbook.
The synopsis tag is not appropriate and doesn't look well in HTML and
inserts unnecessary line breaks in roff.
The <userinput> in <screen> suits this perfectly on the other hand.
