A new value for NM80211Mode is introduced (NM_802_11_MODE_AP) and the
new mode is passed to wpa_supplicant analogous to adhoc-mode.
The places which need to know the interface mode have been extended to
handle the new mode.
If the configuration does not contain a fixed frequency, a channel is
selected the same way as with adhoc-mode before.
Do slightly more validation if NMSettingVlan properties, and make sure
that at least one method of specifying a parent is used.
Remove the check that id is in range, since gobject will not allow you
to set the property to a value outside its declared range anyway.
The ctype macros (eg, isalnum(), tolower()) are locale-dependent. Use
glib's ASCII-only versions instead.
Also, replace isascii() with g_ascii_isprint(), since isascii()
accepts control characters, which isn't what the code wanted in any of
the places where it was using it.
Currently the .gir files for NetworkManager-1.0 and NMClient-1.0 declare
their dependencies twice, once with the GIR name and another one with
the pkg-config name. This causes problems with Vala bindings generation.
This patch adds the settings code (NMSettingAdsl) and the initial
"scaffolding" i.e., a tiny stub version of NMDeviceAdsl and the
udev handler code to get the device detected.
With this patch you should be able to see an atm device being detected
by networkmanager in the logs, although of course it doesn't
do anything useful yet.
Extract from the logs:
[1304668252.341354] [nm-udev-manager.c:562] adsl_add(): adsl_add: ATM Device detected from udev. Adding ..
(ueagle-atm0): failed to look up interface index
(ueagle-atm0): new ADSL device (driver: 'ueagle-atm' ifindex: -1)
(ueagle-atm0): exported as /org/freedesktop/NetworkManager/Devices/2
(ueagle-atm0): now managed
(ueagle-atm0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
(ueagle-atm0): deactivating device (reason: 2).
[1304668252.345102] [nm-system.c:1349] flush_routes(): (ueagle-atm0) failed to lookup interface index
[1304668252.347821] [nm-device.c:3912] nm_device_state_changed(): (ueagle-atm0): device is available,
In this version, we hack the nm-device.c:nm_device_get_priority() to get better priority
instead of changing the DeviceType enum.
Signed-off-by: Pantelis Koukousoulas <pktoss@gmail.com>
Add NM_SETTING_BOND_ERROR_INVALID_OPTION and
NM_SETTING_BOND_ERROR_MISSING_OPTION error codes so we can better
distinguish errors in different options, and add checks for various
incompatible sets of options.
NMSettingBond sets the "miimon" option to "100" by default, but this
means that when reading in a saved configuration with "arp_interval"
set, it would end up with both "miimon" and "arp_interval" set, which
is invalid. Fix this by clearing "miimon" if "arp_interval" is set,
and vice versa.
The kernel is broken for Ad-Hoc WPA, and creates the connections
as open connections instead. Yeah, eventually we can use
wpa_supplicant with RSN support, but for now we just have to
disable Ad-Hoc WPA because it's a problem to say we're creating
a protected network but then have the kernel not do that for
us. Will be re-enabled once all the necessary bits have been
fixed.
Note that Ad-Hoc WPA has been broken since at least 2.6.32 with
mac80211-based drivers, which is what most users will be using.
It is currently not possible to create a connection where the
connection-type-specific NMSetting has all default values. This hasn't
been a problem in the past because each type had at least one property
that either had no default value or had a default value that didn't
pass verify(). But NMSettingInfiniband didn't have that property, so
it's impossible to create an InfiniBand connection unless you change
the value of at least InfiniBand-specific setting.
Work around this for now by making the default value of
NMSettingInfiniband:transport-mode be NULL, so it needs to be
overridden.
(comments by dcbw)
This allows out-of-the-box connectivity on IPv6-only networks.
Once caveat is that connections where the user currently
expects no IPv4 connectivity to terminate the connection and
retry will no longer do so until IPv6 also times out, and if
that network where IPv4 is expected to fail also has an IPv6
router sending advertisements, the connection will succeed
instead of failing. That can be resolved by setting the
right bit in the connection's config file; and it's expected
that the number of users who expect IPv4 failure on a
network with usable IPv6 connectivity is quite small
compared to the benefit of OOB IPv6 connectivity.
The crash happens with ipw2200, kernel 3.2.0 when a user tries to connect
to a hidden network using nm-applet.
g_assert (have_ap); is hit in 'case NMU_SEC_STATIC_WEP:' branch.
Reported by Mathieu Trudel-Lapierre.
See also:
(lp:908516)
(lp:908380)
When NM was registering all of its enum types by hand, it was using
NamesLikeThis rather than the default names-like-this for the "nick"
values. When we switched to using glib-mkenums, this resulted in
dbus-glib using different strings for the D-Bus error names, causing
compatibility problems.
Fix this by using glib-mkenums annotations to manually fix all the
enum values back to what they were before. (This can't be done in a
more automated way, because the old names aren't 100% consistent. Eg,
"UNKNOWN" frequently becomes "UnknownError" rather than just
"Unknown".)
"InfiniBand" has a capital "B". Fix that everywhere it's being used as
a human-readable string.
In particular, the RH initscripts recognize "TYPE=infiniband" and
"TYPE=InfiniBand", but not "TYPE=Infiniband", which is what we were
writing before.
The function documents that it returns FALSE if idx is out of range,
so don't g_return_val_if_fail() in that case.
Also, free the return value from g_hash_table_get_keys().
Since the options are a hash table now there wasn't any way to
determine what options were allowed and what their default values
are. Add some functions to do that.
