* src/nm-device-802-11-wireless.c
- (supplicant_iface_scanned_ap_cb): fix parsing of hidden APs due to
odd length of ESSID returned from ieee80211 stack-based drivers
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2165 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c
- (supplicant_iface_scanned_ap_cb): remove erroneous & from WPA & RSN
IE handling blocks that cause mis-parsing of the IE
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2164 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c
- (init_supplicant_interface): new function; pull supplicant interface
setup code out into standalone function since it must be called from
two different places
- (real_init): sup_mgr is now in private object data; get and track
the supplicant manager object over the NMDevice subclass' lifetime
and register a signal handler for its state signals; only try to
initialize the supplicant interface if the supplicant manager is in
the IDLE state (and therefore is ready for requests)
- (request_wireless_scan): reschedule the scan request if (a) there is
no supplicant interface yet (meaning wpa_supplicant isn't running
or isn't ready yet), or (b) if the supplicant interface isn't ready
for requests yet
- (supplicant_iface_connection_state_cb): new function; stub for
handling supplicant interface connection state signals
- (supplicant_mgr_state_cb): do the right thing when wpa_supplicant
comes and goes
- (nm_device_802_11_wireless_dispose): clean up spacing; release the
supplicant manager object that's being tracked starting with this
commit
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2163 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/supplicant-manager/nm-supplicant-interface.c
- (nm_supplicant_interface_set_property): track signal handler ID
- (nm_supplicant_interface_dispose): remove signal handler on dispose
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2162 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/supplicant-manager/nm-supplicant-interface.[ch]
- (nm_supplicant_interface_get_connection_state): new function
- define new supplicant connection states
- send a signal when the supplicant connection state changes
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2157 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch by Timo Hoenig <thoenig@suse.de>:
* src/nm-dbus-manager.c (nm_dbus_manager_start_service): Make it work with
DBUS-1.0.
* src/supplicant-manager/Makefile.am: Add nm-supplicant-marshal here, since
we can't use the one from the main source directory.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2133 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Scan using wpa_supplicant over DBus.
* src/nm-device-802-11-wireless.c
- remove wireless extensions netlink event handler bits
(wireless_event_helper, nm_device_802_11_wireless_event)
- remove wireless extensions scan event handler bits
(process_scan_results, add_new_ap_to_device_list, hexstr2bin,
hex2byte, hex2num, request_and_convert_scan_results,
free_process_scan_cb_data, scan_results_timeout,
schedule_scan_results_timeout, cancel_scan_results_timeout)
- Rename nm_device_802_11_wireless_scan() -> request_wireless_scan()
and request scans from the supplicant interface rather than directly
- Move functionality of convert_scan_results() to cull_scan_list() and
supplicant_iface_scanned_ap_cb()
- (supplicant_iface_scan_result_cb): new function; schedule a new scan
at the scan interval when the current scan has finished
- (supplicant_iface_state_cb): start scanning when the supplicant
interface enters the READY state, and stop scanning when it
enters the DOWN state
- (cull_scan_list): weed out old access points from the scan list
- (supplicant_iface_scanned_ap_cb): convert a supplicant scanned access
point into an NMAccessPoint and merge it into the device's scan list
* src/supplicant-manager/nm-supplicant-interface.c
src/supplicant-manager/nm-supplicant-interface.h
- Add a new signal "scan-result" which is issued when the supplicant
notifies NM that a scan has completed
- Add a new signal "scanned-ap" that notifies listeners of a new access
point found in the scan. Called once for each access point that
the supplicant interface object receives from the supplicant as a
result of the "scanResults" method call
- (wpas_iface_query_scan_results): don't wait 4s before querying
for the initial scan results
- (scan_request_cb): new function; send listeners the result
(success, error) of a wireless scan request
- (nm_supplicant_interface_request_scan): new function; ask the
supplicant to perform an immediate wireless scan
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2128 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/supplicant-manager/Makefile.am
- Since we're including NetworkManagerMain.h in nm-supplicant-interface.c,
add HAL cflags/includes and named-manager includes directory
* src/supplicant-manager/nm-supplicant-interface.h
- New state STARTING to handle transition from INIT to READY where
the addInterface pending call is still outstanding
* src/supplicant-manager/nm-supplicant-interface.c
- track pending calls differently since we may have more than one
going on at any given time
- request scan results from wpa_supplicant; but don't do it more often
than every 4 seconds. Drivers that do background scanning
(like the 'ipw' drivers) send a continuous stream of scan completion
notifications, so we don't want to hammer the supplicant or dbus
with requests for all scan results every time we get a completion
notification.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2126 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/supplicant-manager/nm-supplicant-types.h
- new file; move all supplicant manager object typedefs here for
#include sanity
* src/supplicant-manager/nm-supplicant-interface.c
src/supplicant-manager/nm-supplicant-interface.h
- new file; an object that interfaces an NMDevice object to the
supplicant and handles signals from the supplicant. This object
does all necessary DBus communication with wpa_supplicant.
* src/supplicant-manager/nm-supplicant-manager.c
src/supplicant-manager/nm-supplicant-manager.h
- Actually do something. Track the state of the wpa_supplicant service
and deal with its comings & goings. Handle life events of
supplicant interfaces too.
- Move NMSupplicantManager typedef to nm-supplicant-types.h
* src/supplicant-manager/nm-supplicant-connection.h
- Move NMSupplicantConnection typedef to nm-supplicant-types.h
* src/supplicant-manager/Makefile.am
- Add new files to build, and add libnm-util to includes
* src/nm-marshal.list
- New marshaler type: VOID:UINT,UINT
* src/nm-device-802-3-ethernet.c
- (real_init): grab a supplicant interface
- (nm_device_802_3_ethernet_dispose): release the supplicant interface
- (supplicant_iface_state_cb): new function, stub for handling
supplicant interface state changes
* src/nm-device-802-11-wireless.c
- (real_init): grab a supplicant interface
- (nm_device_802_11_wireless_dispose): release the supplicant interface
- (supplicant_iface_state_cb): new function, stub for handling
supplicant interface state changes
* src/NetworkManager.c
- (main): create and keep the supplicant manager around for the lifetime
of NetworkManager
* src/Makefile.am
- Link to the supplicant manager sub-library and use the supplicant
manager includes
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2125 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Rework DBus manager signal handling to be more flexible. Previously,
only one signal handler could be registered for a particular interface.
The DBus manager now reference counts DBus bus matches and allows multiple
clients to register signal handlers for the same interface and sender.
* src/NetworkManager.c
- (main): track NMI signal handler ID and remove it when we quit
* src/NetworkManagerMain.h
- Keep track of NMI signal handler ID
* src/nm-dbus-manager.c
src/nm-dbus-manager.h
- rework signal handling; each signal handler references one signal
match, but a signal match may be referenced by one or more
signal handlers. Matches are refcounted and are destroyed when the
last signal handler that references the match is removed. This is
necessary because two signal handlers may end up requiring the same
dbus bus match, so the match must live until the last signal handler
is destroyed (for example, with the wpa_supplicant network interface
dbus interface).
* src/dhcp-manager/nm-dhcp-manager.c
- (nm_dhcp_manager_new): track DHCP signal handler id
- (nm_dhcp_manager_dispose): remove DHCP signal handler
* src/vpn-manager/nm-vpn-service.c
- (nm_vpn_service_add_watch): track VPN service signal handler id
- (nm_vpn_service_remove_watch): remove VPN service signal handler
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2124 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-daemons/nm-vpn-service.c
- (supplicant_child_setup): new function
- (supplicant_exec): make child process use a new process group id
* src/nm-device-802-11-wireless.c
- (nm_vpn_service_child_setup): new function
- (nm_vpn_service_stage1_daemon_exec): make child process use a new
process group id
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2121 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAPList.c
- (nm_ap_list_copy_one_essid_by_address): fix bug due to previous
code cleanup in revision 1.56; the split of the !nm_ap_get_essid()
from the nm_ap_list_get_ap_by_address() call was incorrect and
broke hidden SSID matching. Found by Bill Moss.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2105 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-dbus-nm.c
- (nm_dbus_nm_set_active_device): return an empty success message on
success, rather than falling through to the error case.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2088 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/dhcp-manager/nm-dhcp-manager.c
- (get_ip4_string, get_ip4_uint32s): have the caller pass
the dbus connection and the device object path rather than
constructing it inside both functions. Saves a bit of memory
and clarifies a failure path.
- (nm_dhcp_manager_get_ip4_config): grab the dbus connection
and allocate device path here rather than each of the two
functions above.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2065 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManager.c
- (nm_name_owner_changed_handler): handle NMI coming and going,
this somehow droppout in the refactor
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2064 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Huge DBus refactor:
- Create a "DBus Manager" object which manages the connection and
sends signals on NameOwnerChanged and connection/disconnection events,
handles reconnection to the bus if NM gets kicked off, and abstracts
signal handling
- Remove DBusConnection members from places where they are no
longer needed due to the refactor, like the dbus-connection
property of the named manager, and from NMData
- Reformats a bunch of the code to gnome style
(8-space tabs, braces on same line as statement, 80-col width).
Consider it open season to reformat any bits to gnome style.
style that aren't already.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2061 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-vpn-manager.c
- (nm_vpn_manager_load_services): split and clean up
for readability and correctness. Restrict VPN service
files to ending in ".name", as was meant from the
beginning (but not coded in). Better error reporting.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2044 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/backends/NetworkManagerSuSE.c: Do not restart ypbind; our ypbind
package is now DBUS-enabled and listens for the NM signals.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1969 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Valentine Sinitsyn <e_val@inbox.ru>
* src/nm-ap-security.c
src/nm-ap-security.h
- Add authentication_required bits for subclasses to specify whether
or not real authentication is required for connections, i.e. whether
the AP rejects us when an encryption key is wrong or not.
* src/nm-ap-security-wep.c
src/nm-ap-security-wpa-eap.c
src/nm-ap-security-wpa-psk.c
src/nm-ap-security-leap.c
- Implement authentication_required appropriately for each method
* src/nm-device-802-11-wireless.c
- Be smarter about when to request a key; for example, using a wrong key
in WEP shared key mode previously just timed out and did not request
a new key
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1954 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-vpn-service.c
- Simplify print_vpn_config() arguments
Patch from Antony J Mee <A.J.Mee@ncl.ac.uk>
* src/vpn-manager/Makefile.am
src/vpn-manager/nm-vpn-service.c
- Add new API for passing VPN config options as a dict
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1944 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/applet/applet-dbus-devices.c
gnome/applet/applet-dbus-vpn.c
gnome/applet/applet-dbus.c
gnome/applet/applet-dbus.h
src/nm-dbus-nmi.c
utils/nm-utils.c
utils/nm-utils.h
- Make pending call tracking code generic,
so we can use it in NM as well as the applet
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1940 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
