We make use of libnl (>=3.2.1) to create/delete kernel vlan device,
and it can set vlan id, vlan flags and ingress/egress priority mapping.
V3:
1 nm_netlink_iface_to_index() should use slave name
V2:
1 use existing nm_netlink_iface_to_index()
Signed-off-by: Weiping Pan <wpan@redhat.com>
It's a boolean value not a string. Second, apparently the
kernel turns it on by default these days, so if it's missing
then assume it's supposed to be TRUE.
The example of ifcfg-vlan is as followed:
VLAN=yes
TYPE=Vlan
DEVICE=vlan43 or "DEVICE=eth9.43"
PHYSDEV=eth9
REORDER_HDR=0
VLAN_FLAGS=GVRP,LOOSE_BINDING
VLAN_INGRESS_PRIORITY_MAP=0:1,2:5
VLAN_EGRESS_PRIORITY_MAP=12:3,14:7
ONBOOT=yes
BOOTPROTO=static
IPADDR=192.168.43.149
NETMASK=255.255.255.0
And we try to make it compitable with the format used by initscripts,
and there is no need to change anything in ifcfg-eth9.
Signed-off-by: Weiping Pan <wpan@redhat.com>
(dcbw: complete VLAN testcase)
Due to an omission in the port to the new supplicant D-Bus API
during the 0.9 cycle, if the scan list didn't change, APs may
not have been removed properly from the scan list.
Removes all bonding options properties and adds a "options" dict to hold
them all. Accessible via accessor functions. ifcfg interface is
unchanged.
Signed-off-by: Thomas Graf <tgraf@redhat.com>
Rather than generating enum classes by hand (and complaining in each
file that "this should really be standard"), use glib-mkenums.
Unfortunately, we need a very new version of glib-mkenums in order to
deal with NM's naming conventions and to fix a few other bugs, so just
import that into the source tree temporarily.
Also, to simplify the use of glib-mkenums, import Makefile.glib from
https://bugzilla.gnome.org/654395.
To avoid having to run glib-mkenums for every subdirectory of src/,
add a new "generated" directory, and put the generated enums files
there.
Finally, use Makefile.glib for marshallers too, and generate separate
ones for libnm-glib and NetworkManager.
commit ae34fa900b introduced a new
function nm_netlink_route6_add(). Its declaration in the header
includes a parameter with type 'struct in6_addr', but the proper
system header for that type was not included.
nm_firewall_manager_remove_from_zone() is called from
nm_device_deactivate()
Also fix nm_firewall_manager_add_to_zone() to the latest
FirewallD1.zone.addInterface signature.
Add two helper functions, one for IPv4 and one for IPv6, to ensure
that the core code benefits from compiler type checking when adding
routes. Previously nm_netlink_route_add() took a void* which meant
we messed up adding IPv6 routes sometimes due to confusion over
what was supposed to be passed to it. Also fixes what appears to
be a C&P error with add_ip6_route_to_gateway().
Reported by Tomáš Trnka <tomastrnka@gmx.com>
Since people apparently hate any extra typing, and tools just can't
find it in them to deal with human readable file names, escape some
of the more annoying characters in shell-land.
Suggested by David Lutterkort
That was always the goal, but never got there. This time we need it
for real to abstract handling of dependent connections so bite the
bullet and make it happen.
EAP-FAST used to require some patches to OpenSSL which aren't always
applied. We can't depend on the supplicant supporting EAP-FAST like
we can for EAP methods that don't require any special support from
external libraries. To ensure the error gets reported correctly and
early, fail the configuration step if EAP-FAST isn't supported by
the supplicant but the connection requests it.
Modems take a bit of time, and ModemManager may not quite be
ready for immediate connect after sending the PIN since the
modem isn't enabled. The specific issue was that MM is still
closing serial ports, so if we try to enable too soon we'll
get an error about serial ports being closed.
BSS info apparently doesn't get updated that often since it's
based on scan information, so instead use the AP info which updates
with every beacon. Using the BSS info caused the signal to
be the same value over long periods of time even when moving far
away from the AP.
Consolidate device creation in the manager object; bluetooth and
modem devices were already handled by it, so it makes sense to do
it all from one place. Furthermore we'll be creating virtual devices
in the manager too. It also reduces indirection (no need to send
device_creator() in the DEVICE_ADDED signal) and makes the code
flow clearer.
All of the information in the configuration files for local caching
dnsmasq or BIND servers are accessible already over the D-Bus
interface, so there's no sensitive information here.
Allows clients to retrieve the reason a device changed to
the given state along with the state itself, preventing
race conditions if the state were retrieved separately
from the reason. Reason codes were not previously
accessible without listening to the StateChanged signal.
We do not want to break other methods, when EAP-FAST specific error condition
is detected: no PAC file provided and automatic PAC provisioning is disabled.
Adds a new "master" property to NMActiveConnection containing the path
of the master NMDevice if the connection has a master.
Signed-off-by: Thomas Graf <tgraf@redhat.com>
