Support accepting more then one signal at a time.
It is to be expected, that one change in platform raises
several signals. Extend the assertion helpers to express
that.
Up to now, this code was correct. Later we will add another field
to NMPlatformIP4Route which causes the test to operate on
uninitialized data.
Instead of explicitly initializing the field, just clear the whole
struct.
And nmtst_platform_ip6_routes_equal().
As already indicated by the comment, using memcmp() doesn't really work
here. It worked up to now, because the NMPlatformIP4Route structure has no
padding at the end.
If we would have a last 'guint8' member (as we will add later),
initializing an arry of routes on the stack would not clear the bytes
from the padding and the comparison using memcmp() would fail.
Add a comment about the upstream bug that fixes
the suppressed memleak in libnl.
Also, add a different backtrace for the same bug.
It currently doesn't hit easily, because we don't
call nl_msg_parse() often. In the future we will
though.
Try to set the MTU of the parent Ethernet interface to match the
requested PPP MTU and MRU. This allows the negotiation of a PPP MTU
and MRU greater than 1492.
We switched to user-mode PPPoE client to work around a bug in kernel
PPPoE code that caused pppd not to be notified when the connection was
terminated with a PADT before the LCP Termination Request.
The kernel bug has now been fixed upstream with commit 287f3a943fef
"pppoe: Use workqueue to die properly when a PADT is received", queued
for v4.1.
Since the issue affected only very particular scenarios and could
somehow be solved with the right configuration (see bugzilla entry),
we can safely revert the patch and restore the use of kernel mode
PPPoE.
This reverts commit 7955806a02.
https://bugzilla.gnome.org/show_bug.cgi?id=742939
==21573== Syscall param mount(type) points to unaddressable byte(s)
==21573== at 0x854B9BA: mount (syscall-template.S:81)
==21573== by 0x158922: main (test-common.c:295)
==21573== Address 0x0 is not stack'd, malloc'd or (recently) free'd
==21573==
{
<insert_a_suppression_name_here>
Memcheck:Param
mount(type)
fun:mount
fun:main
}
Fixes: d6aef9c188
When a connection had static IP addresses, an early event
from plaform would clear them from priv->con_ip4_config.
Fix that, by don't initializing priv->con_ip4_config
before we commit the first time.
https://bugzilla.gnome.org/show_bug.cgi?id=749052
Fixes: 557667df12
We'd be able to do so for already existing devices, but not for devices that
are added afterwards, since gudev is hardwired not to listen for events from
kernel.
Mount a private sysfs instance. Otherwise gudev sees the devices from the
parent netns as opposed to our netns.
We do, however need a writable /sys/devices subtree for testing the bridge
code. There doesn't seem to be any other way to get a writable subtree of a
read-only filesystem than remounting it with no parameters after the initial
mount. We use this to get a writable sysfs instance and then bindmount it so
that it fits properly in the sysfs hierarchy.
Co-Authored-By: Thomas Haller <thaller@redhat.com>
It could be that the device was removed and the default route manager holds the
last reference:
Breakpoint 1, dispose (object=0x90e710 [NMDeviceTun]) at devices/nm-device.c:8588
8588 NMDevice *self = NM_DEVICE (object);
(gdb) bt
#0 0x000000000045d24e in dispose (object=0x90e710 [NMDeviceTun]) at devices/nm-device.c:8588
#1 0x00007ffff4d29b7c in g_object_unref (_object=0x90e710) at gobject.c:3133
#2 0x00000000004b0a61 in _entry_at_idx_remove (entry=<optimized out>) at nm-default-route-manager.c:192
#3 0x00000000004b0a61 in _entry_at_idx_remove (vtable=<optimized out>, self=<optimized out>, entry_idx=<optimized out>) at nm-default-route-manager.c:638
#4 0x00000000004adb51 in _ipx_update_default_route (vtable=0x7b1850 <vtable_ip6>, self=0x7da610 [NMDefaultRouteManager], source=<optimized out>) at nm-default-route-manager.c:814
#5 0x0000000000459ccb in nm_device_set_ip6_config (self=0x90e710 [NMDeviceTun], new_config=<optimized out>, commit=<optimized out>, reason=<optimized out>) at devices/nm-device.c:6213
#6 0x0000000000450c92 in ip6_config_merge_and_apply (self=0x90e710 [NMDeviceTun], commit=0, out_reason=0x0) at devices/nm-device.c:3670
#7 0x0000000000452d06 in update_ip_config (self=0x90e710 [NMDeviceTun], initial=<optimized out>) at devices/nm-device.c:6915
#8 0x000000000046253e in queued_ip_config_change (user_data=<optimized out>) at devices/nm-device.c:6945
#9 0x00007ffff4a257fb in g_main_context_dispatch (context=0x7ca3e0) at gmain.c:3111
#10 0x00007ffff4a257fb in g_main_context_dispatch (context=context@entry=0x7ca3e0) at gmain.c:3710
#11 0x00007ffff4a25b98 in g_main_context_iterate (context=0x7ca3e0, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at gmain.c:3781
#12 0x00007ffff4a25ec2 in g_main_loop_run (loop=0x7ca4a0) at gmain.c:3975
#13 0x0000000000444bbe in main (argc=<optimized out>, argv=<optimized out>) at main.c:486
(gdb)
Program received signal SIGTRAP, Trace/breakpoint trap.
g_logv (log_domain=0x7ffff4d4f164 "GLib-GObject", log_level=G_LOG_LEVEL_WARNING, format=<optimized out>, args=args@entry=0x7fffffffd5b0) at gmessages.c:1046
1046 g_private_set (&g_log_depth, GUINT_TO_POINTER (depth));
(gdb) bt
#0 0x00007ffff4a2c970 in g_logv (log_domain=0x7ffff4d4f164 "GLib-GObject", log_level=G_LOG_LEVEL_WARNING, format=<optimized out>, args=args@entry=0x7fffffffd5b0) at gmessages.c:1046
#1 0x00007ffff4a2cbaf in g_log (log_domain=log_domain@entry=0x7ffff4d4f164 "GLib-GObject", log_level=log_level@entry=G_LOG_LEVEL_WARNING, format=format@entry=0x7ffff4d563b0 "invalid unclassed pointer in cast to '%s'") at gmessages.c:1079
#2 0x00007ffff4d481f9 in g_type_check_instance_cast (type_instance=0x90e710, iface_type=<optimized out>) at gtype.c:4030
#3 0x0000000000459ceb in nm_device_set_ip6_config (self=0x90e710, new_config=<optimized out>, commit=<optimized out>, reason=0x0) at devices/nm-device.c:6217
#4 0x0000000000450c92 in ip6_config_merge_and_apply (self=0x90e710, commit=0, out_reason=0x0) at devices/nm-device.c:3670
#5 0x0000000000452d06 in update_ip_config (self=0x90e710, initial=<optimized out>) at devices/nm-device.c:6915
#6 0x000000000046253e in queued_ip_config_change (user_data=<optimized out>) at devices/nm-device.c:6945
#7 0x00007ffff4a257fb in g_main_context_dispatch (context=0x7ca3e0) at gmain.c:3111
#8 0x00007ffff4a257fb in g_main_context_dispatch (context=context@entry=0x7ca3e0) at gmain.c:3710
#9 0x00007ffff4a25b98 in g_main_context_iterate (context=0x7ca3e0, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at gmain.c:3781
#10 0x00007ffff4a25ec2 in g_main_loop_run (loop=0x7ca4a0) at gmain.c:3975
#11 0x0000000000444bbe in main (argc=<optimized out>, argv=<optimized out>) at main.c:486
(gdb)
https://bugzilla.gnome.org/show_bug.cgi?id=748193
NM always prepends the list of DNS domains received through DHCP to
the search list in /etc/resolv.conf, overriding the DHCP-supplied DNS
domain search order. This behavior is not entirely correct since it
changes the search order provided by system administrators.
We cannot simply avoid adding the DNS domain list to the search list
because this would break some configurations that rely on the 'domain'
option to deliver the search list.
This patch modifies the behavior of DNS manager to:
- insert the DHCP-provided 'domain' at the end of 'searches' option
so that 'searches' is always preferred
- ignore 'domain' if 'searches' option exists and 'domain' is a
single domain
https://bugzilla.gnome.org/show_bug.cgi?id=748900
g_dbus_proxy_get_cached_property_names() function can return NULL.
Program received signal SIGSEGV, Segmentation fault.
on_bss_proxy_acquired (proxy=0x7fffe4003880 [GDBusProxy], result=0x895490, user_data=<optimized out>) at supplicant-manager/nm-supplicant-interface.c:159
159 while (*iter) {
(gdb) bt
#0 0x000000000048fac7 in on_bss_proxy_acquired (proxy=0x7fffe4003880 [GDBusProxy], result=0x895490, user_data=<optimized out>)
at supplicant-manager/nm-supplicant-interface.c:159
#1 0x0000003bf84728b7 in g_simple_async_result_complete (simple=0x895490 [GSimpleAsyncResult]) at gsimpleasyncresult.c:763
#2 0x0000003bf8472919 in complete_in_idle_cb (data=<optimized out>) at gsimpleasyncresult.c:775
#3 0x0000003bf5c497fb in g_main_context_dispatch (context=0x7d6420) at gmain.c:3111
#4 0x0000003bf5c497fb in g_main_context_dispatch (context=context@entry=0x7d6420) at gmain.c:3710
#5 0x0000003bf5c49b98 in g_main_context_iterate (context=0x7d6420, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at gmain.c:3781
#6 0x0000003bf5c49ec2 in g_main_loop_run (loop=0x7d64e0) at gmain.c:3975
#7 0x00000000004349d6 in main (argc=1, argv=0x7fffffffe598) at main.c:486
Instead of hacky stuff in the Manager, let plugins themselves indicate
which links should be ignored (because they are really child links that
are controlled by a different device that the plugin handles).
Ethernet, WiFi, and VLAN used the same implementation for initial address.
Ethernet and WiFi used the same implementation (and duplicated code) for
permanent MAC address, plus they both used ethtool in what should be
generic code, which is better done in the platform.
