* libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list.
We get signalled when it changes.
* libnm-glib/nm-client.c: Cache NMState and device list, we get signalled
when it changes.
* libnm-glib/nm-device.c: Cache the device state property.
* libnm-glib/nm-access-point.c: Cache the strength property.
* src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler.
The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0)
and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan
until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while
the device is down, activating, or activated (in case of A/B/G cards).
Remove some old dead ifdef'ed out code that used to configure wireless devices,
it's all done through supplicant now.
* src/supplicant-manager/nm-supplicant-interface.c: Fix the reference
counting issues with pending calls which caused leaks and crashes when
interface was removed (now that the interface actually gets removed).
* src/nm-call-store.c: Make a copy of data before running a foreach
with user callback on it - The most common usage pattern is to cancel
(and thus remove) all pending calls with foreach which would modify
the hash table we're iterating over.
* src/nm-manager.c: When a device is added, make sure it is "up". When
it's removed or disabled due to disabling wireless or networking, bring
it down.
* include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN.
* src/nm-device-802-11-wireless.c:
* src/nm-device-802-3-ethernet.c:
* src/nm-device.c:
- Remove "init" virtual function, all gobjects have a place for that
already (constructor).
- Replace "start" virtual function with "bring_up", devices can be
brought up and down more than just on startup now.
- Add "is_up" virtual function.
- Implement one way to bring a device down instead of previous 4 different
ways, each of witch did something different.
* src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice,
all it needs is the device interface.
Get rid of NMData.dev_list (3 members to go).
Get rif of NMData in a lot of places.
* gnome/libnm_glib/libnm_glib.c: Make it compile again.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-device-802-11-wireless.c: Add "network-added" and
"network-removed" signals.
* libnm-glib/libnm-glib.pc.in: Require NetworkManager >= 0.7.0.
* libnm-glib/nm-access-point.c: Add "strength-changed" signal, emit it
when receiving the signal from dbus.
* src/nm-device-802-11-wireless.c (get_property): Fix PROP_ACTIVE_NETWORK
property.
* src/NetworkManagerPolicy.c (state_changed): Fix a typo to make the
deactivation of the previously activated device working again.
* src/nm-activation-request.c: Remove NMActStage property and it's getter
and setter.
* src/nm-device.c (nm_device_is_activated): Remove.
state == NM_DEVICE_STATE_ACTIVATED is just as easy to use.
* include/NetworkManager.h: Remove NM_DBUS_NO_DEVICES_ERROR,
NM_DBUS_NO_DIALUP_ERROR, NM_DBUS_NO_NETWORKS_ERROR,
NM_DBUS_NO_ACTIVE_DEVICE_ERROR, NM_DBUS_NO_ACTIVE_NET_ERROR errors and
NM_DBUS_SIGNAL_STATE_CHANGE signal.
Remove NMNetworkStatus and NMActStage enums.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2345 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-vpn-manager.c: Handle the DBUS state changes itself.
Handle device state changes and disconnect VPN if it's device deactivates.
* src/nm-dbus-nm.c:
* src/nm-dbus-nm.h:
* src/nm-dbus-device.c:
* src/nm-dbus-device.c:
* src/nm-dbus-net.c:
* src/nm-dbus-net.h: Remove. All of it is implemented byt the new dbus API.
* src/NetworkManagerMain.h: Get rid of all but 3 properties of NMData.
* src/nm-device.c (nm_device_get_by_udi):
(nm_device_get_by_iface): Remove. This doesn't belong here and is already
implemented in the correct location (NMManager).
Rip out all the test_device stuff.
* src/NetworkManagerPolicy.c: Remove the leftover activation success and
failure handlers, it's all done by NMDevice already.
* src/NetworkManager.c: Move the signal handling here from nm-logging.c
Remove the iochannel hack to route the unix signals to the main thread since
we're not threaded anymore.
* src/NetworkManagerAP.c: Implement HWAddress property.
* src/NetworkManagerDbus.c: Remove the dbus signal sending code, it happens
automatically with dbus-glib.
* src/nm-netlink-monitor.c:
* src/nm-netlink-monitor.h:
- Move it low in the class hierarchy, don't reference any NM types.
- Remove private data from the header.
- Use type safe checks in public API methods.
- Make it a singleton so we don't have to pass the single reference around.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2339 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-ip4-config.xml: Implement.
* libnm-glib/libnm-glib-test.c: Use new DBUS API in tests.
* libnm-glib/nm-ip4-config.c:
* libnm-glib/nm-ip4-config.c: Implement.
* src/nm-ap-security[-*]: Remove circular dependencies between APs and AP
securities. APs reference security.
* src/nm-device-802-11-wireless.c: Implement missing properties that need to
be exported over DBUS.
* src/nm-device-802-3-ethernet.c: Ditto.
* src/NetworkManagerAP.c:
* src/NetworkManagerAP.h:
- Convert to GObject, export over DBUS.
* src/nm-ip4-config.h:
* src/nm-ip4-config.h:
- Convert to GObject, export over DBUS.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2322 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Totally break NetworkManager. Please use 0.6 branch until futher notice.
* src/:
- Remove old low-level dbus interface implementations and replace them
with dbus-glib one.
* configure.in:
- Require dbus-glib >= 0.72.
- Plug in new sources to build.
* libnm-glib/:
- Implement GObject wrappers on top of DBUS glib auto-generated bindings
to make it more convenient to use from GObject based programs.
* introspection/:
- Implement DBUS XML introspection files, used by both NM and libnm-glib.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2309 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c:
- Add "network-added" and "network-removed" signals.
- Use gobject boilerplate macros to define the GObject.
- Implement wireless device activation.
- Remove activation_failure_handler and activation_success_handler
and instead listen on state-changed signals and run the same code
from there.
* src/nm-device.c:
- Implment NMDeviceInterface::deactivate.
- Remove activation_failure_handler and activation_success_handler
virtual methods. Each device which is interested in these events
can just listen on it's state changed signals.
* src/NetworkManagerPolicy.c:
- Move a bit more NMData usage to NMManager.
- Remove activation scheduling bits.
- Add listeners for wireless device's "network-added" and
"network-removed" signals.
- Listen device changed signals and deactivate currently activated
device when another device start activating (for now).
- Remove (nm_policy_schedule_device_change_check): There's never a need
for calling this, the policy code knows exactly when this should happen,
by listening on events from NMManager and NMDevices.
* src/nm-device-802-3-ethernet.c (nm_device_802_3_ethernet_activate):
Implement.
* src/nm-dbus-nm.c (nm_dbus_nm_set_active_device): Call the activation
method on the specific device instead of going to through policy code
and determining the device type by passed in AP's existance.
* src/nm-device-interface.c (nm_device_interface_deactivate): Implement the
abstract NMDevice deactivation.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2298 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManager.c:
- Set up all the shiny new managers.
* src/NetworkManagerPolicy.c:
- Add the beginnings of new NMPolicy code. Instead of requireing all
classes to call into policy code, make the policy code kind of like
a supervisor that monitors what's going on and drives the whole NM.
* src/nm-hal-manager.c:
* src/nm-hal-manager.h:
- Collect all libhal code scattered around NM to this one class.
- Listen libhal and NMManager events and add/remove devices to
NMManager.
* src/nm-manager.c:
* src/nm-manager.h:
- Implment a replacement for NMData. NMData is now officially
deprecated.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2291 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Make NMDevice abstract class, remove almost all references to it's
subclasses (the last place gets removed with new policy manager). Add
NMDeviceInterface (which NMDevice implements) so that when we have
NMDevice exported over DBUS, there's a common NMDevice interface which
all instances have, plus there's a device specific interface for each
specific type.
Remove functions (nm_device_is_802_3_ethernet) and
(nm_device_is_802_11_wireless). There are already standard GObject macros
for type safe checks.
Use the updated supplican manager API.
* src/nm-device-interface.h:
* src/nm-device-interface.c:
* src/nm-call-store.h:
* src/nm-call-store.c: Implement.
* src/supplicant-manager/nm-supplicant-interface.c:
* src/supplicant-manager/nm-supplicant-interface.h:
* src/supplicant-manager/nm-supplicant-manager.c:
* src/supplicant-manager/nm-supplicant-manager.h:
- Remove all private data type references from public header files.
- Remove all references to other NM classes, this class is just a
proxy between wpa_supplicant and NM so it doesn't have to know
any internals.
- Convert to dbus-glib bindings.
- Type safe checks for public methods' arguments.
- Store pending DBUS call ids to NMCallStore.
* src/supplicant-manager/nm-supplicant-config.c:
- Store config values in a GHashTable instead of GSList.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2285 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerMain.h: Remove all references to DHCP manager.
* src/NetworkManager.c: Don't initialize the DHCP manager, it's a
singleton now.
* src/nm-device.c: Use the new DHCP manager API.
* src/nm-activation-request.c:
* src/nm-activation-request.h:
- Remove all dhcp related properties and methods.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2284 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Threading removal related cleanups:
- Use the glib default main context. Remove the device main context
member from NMDevice, and the main_context member from NMData. Change
all the idle and timeout scheduler functions to use plain
g_idle_add() and g_timeout_add().
- As a side-effect of the first change, nm_dbus_manager_get() no longer
takes an argument; fix that up too.
- Remove all locking, which is useless since we no longer use threads. For
example, nm_get_device_by_iface_locked() has been removed. The global
device list lock, the AP List lock, and all static locks in
NetworkManagerPolicy.c have been removed. The locking utility functions
in NetworkManagerUtils.c have also been removed.
- Other cleanups in spacing and code style
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2205 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Use a single thread for everything. With the move to wpa_supplicant
and communication over D-Bus, there's no reason for multiple threads.
Almost all of the blocking code has been removed, with one exception in
the DHCP manager and a few in the VPN manager. This commit removes the
per-device worker thread and fixes activation cancellation in the absence
of threads. Further removal of thread-related code would be removing
any locking code (like the device list lock) and simplification of logic
around areas of code or data structures that are currently locked.
* autoip.c
dhcp-manager/nm-dhcp-manager.c
nm-device-802-11-wireless.c
nm-device-802-3-ethernet.c
nm-device.c
nm-device.h
- Remove usage of multiple threads
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2197 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device.h: Introduce nm_ioctl_info(), which defines to
nm_info() if IOCTL_DEBUG is set and a no-op if not. We can use this
instead of dumping ifdef's throughout the code.
* src/NetworkManagerSystem.c, src/nm-device-802-11-wireless.c,
src/nm-device-802-3-ethernet.c, src/nm-device.c: Remove ifdef's and
use nm_ioctl_info() in lieu.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1768 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerSystem.c, src/NetworkManagerSystem.h: Add
nm_system_get_mtu(), which returns a user-provided or system-mandated
MTU value for a given device, if any, or zero if no such value
exists. Add nm_system_set_mtu() to set the MTU for a given device
if we have a provided value.
* src/nm-device.c: Set the MTU of devices.
* src/backends/NetworkManagerSuSE.c: Read MTU, if any, from sysconfig.
* src/backends/NetworkManagerDebian.c,
src/backends/NetworkManagerGentoo.c,
src/backends/NetworkManagerRedHat.c,
src/backends/NetworkManagerSlackware.c: Implement stub functions.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1626 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Process netlink messages in device subclasses rather than in
NetworkManager.c. Also add support for recognizing Wireless Events.
* configure.in
- Find GLIB_GENMARSHAL
* src/Makefile.am
- Since we're marshalling custom types for wireless event signals,
we get to create our own marshallers using GLIB_GENMARSHAL
* src/NetworkManager.c
- (nm_monitor_wired_link_state): renamed to nm_monitor_setup
- (nm_monitor_setup): renamed from nm_monitor_wired_link_state, and
cut down somewhat. We no longer process signals here.
- (nm_data_new): create the netlink monitor here, and remove a
useless call to nm_policy_schedule_device_change_check()
- (nm_data_free): get rid of the netlink monitor here
- (nm_device_link_activated, nm_device_link_deactivated): removed
- (main): don't create the netlink monitor here, let nm_data_new
do that. Call nm_policy_schedule_device_change_check() right
before we jump to the mainloop to figure out which device
to use first
* src/NetworkManagerSystem.[ch]
- (nm_system_get_rtnl_index_from_iface, nm_system_get_iface_from_rtnl_index):
convert back and forth from interface names to interface
indexes
* src/nm-device-802-11-wireless.c
- (real_init): connect to wireless-event signals from the netlink
monitor object
- (nm_device_802_11_wireless_event): new function, schedule handler
for wireless event signals from the netlink monitor object. We
want the handler to run in the device's context
- (wireless_event_helper): handle wireless-event signals from netlink
- (nm_device_802_11_wireless_dispose): disconnect wireless-event
signal handler
* src/nm-device-802-11-wireless.h
- remove unused prototype for nm_device_802_11_wireless_new
* src/nm-device-802-3-ethernet.c
- (real_init): new function; set up signal handlers for link events
- (nm_device_802_3_ethernet_link_activated): new function, schedule
handler for netlink link activated events on device's main loop
- (link_activated_helper): when we get a link activated event, set
the device's link to be active
- (nm_device_802_3_ethernet_link_deactivated): new function; schedule
handler for netlink link deactivated events on device's main loop
- (link_deactivated_helper): when we get a link deactivated event, set
the device's link to be inactive
- (nm_device_802_3_ethernet_dispose): disconnect signal handler on
dispose
* src/nm-device-802-3-ethernet.h
- remove unused prototype for nm_device_802_3_ethernet_new
* src/nm-device.[ch]
- (nm_get_device_by_iface_locked): variant of nm_get_device_by_iface
but locks the device list
- (nm_device_set_active_link): a little bit of cleanup and de-indenting
* src/nm-netlink-monitor.[ch]
- (nm_netlink_monitor_class_install_signals): New signal
"wireless-event"
- (nm_netlink_monitor_new): keep reference to NMData so we can get
at the device list
- (nm_netlink_monitor_event_handler): expand for wireless events too
* src/nm-marshal-main.c
- Include generated nm-marshal.c and nm-marshal.h
* src/nm-marshal.list
- List of custom marshal functions
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1555 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Clean up activation cancellation. Should be a lot faster now. Observed
an issue with wireless devices between stage 2 and 3 of activation, where
activation would be cancelled, but the device thread wouldn't notice until
the supplicant association timed out. Reorganize activation such that
a cancellation handler gets immediately scheduled in the device's thread,
and devices have a chance to perform any custom cleanup too.
* src/nm-device.[ch]
- (activation_cancel_handler): new device-type-specific function
for cleaning up device-type-specific stuff on cancellation
- (cancel_activation): removed
- (nm_device_activation_cancel): subsume functionality of
real_cancel_activation, but instead of doing anything, punt
operation to a handler that's run in device-thread context
- (nm_device_schedule_activation_handle_cancel): fix spelling of
a warning message
- (activation_handle_cancel_helper): cancellation handler run in
device-thread context, calls device-type-specific cancelation,
then tears down the activation request
- (real_activation_cancel_handler): generic cancellation handler,
deals with cancelling any in-process DHCP request
- (nm_device_activate_stage1_device_prepare,
nm_device_activate_stage2_device_config,
nm_device_activate_stage3_ip_config_start,
nm_device_activate_stage4_ip_config_get,
nm_device_activate_stage4_ip_config_timeout,
nm_device_activate_stage5_ip_commit): don't call
nm_device_schedule_activation_handle_cancel() any more, since
cancellation will have been already scheduled for us by
nm_device_activation_cancel(). Just exit the function and
assume that the cancel handler will be called next.
* src/nm-device-802-3-ethernet.c
- (real_act_stage2_config): remove; didn't do anything anyway
* src/nm-device-802-11-wireless.c
- (supplicant_status_cb): ensure we don't do anything if the activation
got cancelled
- (real_activation_cancel_handler): implement; cancel user key request
on activation cancellation
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1549 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c, src/nm-device.c: When printing debug
information about what connection stage we are at, provide the total
number of stages, e.g. "Stage 2 of 5", so users know how far along
they are if they experience problems.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1474 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcp-manager/nm-dhcp-manager.c, nm-device.c, nm-ip4-config.c,
nm-ip4-config.h, NetworkManagerSystem.h: Save the hostname reported
by DHCP and pass it to the backends, allowing distribution-specific
behavior with respect to the DHCP-supplied hostname (if nothing else,
some distributions might not want to set the hostname).
* backends/NetworkManagerSuSE.c: Set the hostname if the variable
DHCLIENT_SET_HOSTNAME is set to "yes" in /etc/sysconfig/network/dhcp.
Also update our NIS behavior.
* backends/NetworkManagerDebian.c, backends/NetworkManagerGentoo.c,
backends/NetworkManagerRedHat.c, backends/NetworkManagerSlackware.c:
Add stub functions.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1382 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAP.[ch]
- (nm_ap_get_matched, nm_ap_set_matched): remove
* src/NetworkManagerAPList.[ch]
- (nm_ap_list_diff): removed
- (nm_ap_list_merge_scanned_ap): move AP dbus signal logic here,
deal with access points changing essids on us
* src/nm-device-802-11-wireless.c
- (add_new_ap_to_device_list): move AP dbus signal logic to
src/NetworkManagerAPList.c
- (real_can_interrupt_activation): new function; allow interruption
of device activation if we are waiting for a network key
* src/NetworkManagerPolicy.c
- (nm_policy_device_change_check): allow interruption of currently
activating devices if the device allows it. Previous behavior
would refuse to activate a just-plugged wired device if a
wireless device was waiting for a key.
* src/nm-device.[ch]
- (nm_device_can_interrupt_activation): new function; ask devices
whether their activation can be interrupted
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1375 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManager.c, src/NetworkManagerSystem.h, src/nm-device.c:
Allow backends to flag a device (in whatever distro-dependent way
they so desire) as disabled. NM will ignore any such device.
* src/backends/NetworkManagerDebian.c,
src/backends/NetworkManagerRedHat.c,
src/backends/NetworkManagerSlackware.c: Add stub function
nm_system_device_get_disabled() that always returns FALSE (enabled).
* src/backends/NetworkManagerSuSE.c: Add system_disabled field to the
SUSE-specific configuration structure. Fill it in from the
NM_CONTROLLED variable in the system networking scripts. If this var
exists and is "no", we ignore the device.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1361 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device.c
src/nm-device.h
- Allow subclasses to implement deactivate_quickly()
- (nm_device_deactivate_quickly): call subclass
deactivate_quickly() methods
- (nm_device_set_active_link): small cleanups, and don't
deactivate the device right away because we risk a deadlock
when called from device thread, waiting for the device
thread to cancel activation
* src/nm-device-802-11-wireless.c
- (real_deactivate_quickly): new function
- (nm_device_802_11_wireless_class_init): hook in real_deactivate_quickly
- (real_deactivate): move supplicant cleanup to real_deactivate_quickly
so that we kill the supplicant when we sleep too
- (supplicant_interface_init): work around naive naming attempts of
wpa_ctrl when naming sockets
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1326 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c, src/nm-device-802-11-wireless.h,
src/nm-device-802-3-ethernet.c, src/nm-device-802-3-ethernet.h,
src/nm-device.c: Fix a FIXME! Reimplement the function
nm_device_update_hw_address() in device subclass variants,
nm_device_802_3_ethernet_set_address() and
nm_device_802_11_wireless_set_address(), hook them up, and use them.
This fixes the existing bug where MAC addresses are all zeros.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1309 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-private.h
src/nm-device.c
- (nm_device_activate_schedule_stage3_ip_config_start): make this
function available to subclasses
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1283 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/dhcp-manager/nm-dhcp-manager.c
- Recognize activation cancellation when waiting for DHCP
configuration from dhcdbd
- Ignore non-dhcdbd messages
* src/nm-device.c
- (real_act_stage3_ip_config_start): return to correct behavior
of letting the dhcp-manager notify us of failure or
success rather than incorrectly doing that ourselves
- (nm_device_activate_stage4_ip_config_get): deal with
activation cancellation a bit earlier
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1253 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c
src/nm-device.[ch]
- Add hooks to subclasses for stage3_ip_config_start and
stage4_ip_config_timeout
* src/nm-device-802-3-ethernet.c
- (real_get_generic_capabilities): make devices NM-supported
by default
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1251 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManager.c
- Move link-checking/probing into the device subclasses
themselves
* src/nm-device.[ch]
src/nm-device-802-11-wireless.c
src/nm-device-802-3-ethernet.c
- Do periodic link checking in device subclasses rather
than being triggered from NetworkManager.c
- discover_wireless_capabilities -> get_wireless_capabilities
- discover_generic_capabilities -> get_generic_capabilities
- Device subclass activation routines now return a value of type
NMActStageReturn to indicate what step to perform next
- Devices now override stage4_get_ip4_config if they choose
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1249 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c
- (real_init): don't chain up to parent init because we don't
need to do that anymore
* src/nm-device.c
- (discover_device_type): fix arguments to ioctl() to correctly
pass interface name
- (nm_device_new): consolidate generic device initialization into
nm_device_new()
- (real_init): remove, consolidated to nm_device_new()
- (nm_device_deactivate, real_deactivate): consolidate
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1247 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* refactor NMDevice into a GObject-based framework with separate
objects for wired and wireless. The following files are no
longer used but should stick around for a bit so we don't
loose code through the cracks:
NetworkManagerDevice.c
NetworkManagerDevice.h
NetworkManagerWireless.c
NetworkManagerWireless.h
The intent here is to allow each device type to manage its own
connection & activation life-cycle, ie to allow wireless devices
to interface with wpa_supplicant, etc. There's a fair bit of
encapsulation breakage right now that should gradually get pulled
back into each device, along with things like periodic property
updates and link probing.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1244 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
