* src/NetworkManager.c
src/NetworkManagerMain.h
- (nm_get_hal_ctx): new function, move Hal initialization code here
- (nm_hal_init): new function, init libhal context then add devices
- (nm_hal_deinit): new function, clean up libhal context
- (nm_data_free): Move Hal cleanup here
- (main): check whether Hal is running, and if so, get a list of
network devices from it
* src/NetworkManagerDbus.c
- (nm_dbus_signal_filter): trap NameOwnerChanged signals for Hal,
and when it appears, get a list of network devices from it. If
Hal goes away, clean up the libhal context
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@738 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
- (nm_device_wireless_process_scan_results): scan every 20s when
disconnected and scanning is ALWAYS_SCAN or WHEN_UNASSOCIATED
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@722 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-netlink-monitor.c
(nm_netlink_monitor_event_handler): check for the presence
of either error condition not both.
(nm_netlink_monitor_error_handler): emit error signal if
error occurs.
(nm_netlink_monitor_event_handler),
(nm_netlink_monitor_error_handler),
(nm_netlink_monitor_disconnect_handler): if an
assertion fails disconnect the event handler to prevent
infinite loops.
* src/nm-netlink-monitor.h: add new error condition
NM_NETLINK_MONITOR_ERROR_WAITING_FOR_SOCKET_DATA
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@719 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-netlink-monitor.c
(nm_netlink_monitor_event_handler): remove bogus < 0
check on unsigned value and return early if the kernel
didn't send any bytes.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@718 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/backends/NetworkManagerDebian.c
- Add nm_system_device_get_use_dhcp() to debian backend
Patch from Kay Sievers:
* src/backends/NetworkManagerSuSE.c
- Update debian backend for static IP nameservers
* src/NetworkManagerDevice.c
- Actually set the device to use static IP or DHCP rather
than always DHCP
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@671 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/vpn-properties/nm-vpn-ui-interface.h: New file
* gnome/vpn-properties/nm-vpn-properties.glade: New file
* gnome/vpn-properties/nm-vpn-properties.c: New file
* gnome/vpn-properties/Makefile.am: New file
* src/vpn-manager/nm-vpn-manager.h: Rework prototypes to take an
array of passwords
* src/vpn-manager/nm-vpn-manager.c
(nm_vpn_manager_activate_vpn_connection): Take an array of passwords
instead of just a single one
* src/vpn-manager/nm-dbus-vpn.c:
(nm_dbus_vpn_get_vpn_connection_properties): Also append service_name
here
(nm_dbus_vpn_activate_connection): Rework to take an array of passwords
* gnome/applet/vpn-password-dialog.h (nmwa_vpn_request_password):
Change the interface here to give a list of passwords. Also, don't
require username, but do require service
* gnome/applet/vpn-password-dialog.c: Look up the VPN .name files for
the binary for the auth-dialog and use that instead of putting up a
dialog asking for a single password
* gnome/applet/vpn-connection.[ch]: Don't remember the user_name,
however do remember the service
* gnome/applet/main.c (main): Setup i18n
* gnome/applet/applet.c (nmwa_update_state): Add a line "VPN
connection to '%s'" to the tooltip if we are connected using VPN
(nmwa_menu_vpn_item_activate): Check last_attempt_success gconf
key to determine whether we the auth-dialog needs to
reprompt. Also cope with the fact that the auth-dialog now returns
an array of passwords.
(nmwa_menu_configure_vpn_item_activate): New handler for
"Configure VPN..." menu item
(nmwa_menu_add_vpn_menu): Add the "Configure VPN..." menu item
(is_vpn_available): New function to determine if we got any
NM-compatible VPN software installed
(nmwa_menu_add_devices): Use is_vpn_available to add VPN menu
items only if we have NM-compatible VPN software installed
(nmwa_gconf_vpn_connections_notify_callback): Slightly rework the
logic for detecting when VPN connections are removed
* gnome/applet/applet-dbus.h: Removed the prototypes for
nmwa_dbus_vpn_activate_connection, nmwa_dbus_vpn_deactivate_connection
since these are defined elsewhere
* gnome/applet/applet-dbus.c (set_vpn_last_attempt_status): New
function used to keep track of whether the last attempt succeded
(nmwa_dbus_filter): Update last_attempt according to whether the
VPN connection could be established or not
* gnome/applet/applet-dbus-vpn.h (nmwa_dbus_vpn_deactivate_connection):
Change prototype to take an array of passwords, not just a single
password
* gnome/applet/applet-dbus-vpn.c (nmwa_dbus_vpn_properties_cb): Only
update service, not user
(nmwa_dbus_vpn_remove_one_vpn_connection): Check that applet->
dbus_active_vpn_name is not NULL before using it
(nmwa_dbus_vpn_activate_connection): Send the passwords as a
string array instead of assuming a single password
* gnome/applet/applet-dbus-info.c:
(nmi_dbus_get_vpn_connection_properties): Use the logged in user for
user name; don't read from gconf
* gnome/applet/Makefile.am: Also export SYSCONFDIR and
VPN_NAME_FILES_DIR
* gnome/Makefile.am (SUBDIRS): Add vpn-properties
* configure.in: Add checks for gmodule-2.0.
Generate gnome/vpn-properties/Makefile. Don't generate any Makefile's
in vpn-daemons nor vpn-daemons/vpnc. We have separate autotooled
projects under vpn-daemons now. See vpn-daemons/vpnc/Changelog
for details
* vpn-daemons/Makefile.am: Removed
* vpn-daemons/README: New file to describe extensions points for VPN
software
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@664 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/backends/NetworkManagerRedHat.c
- (get_current_profile_name): new function, grab current network profile name from
/etc/sysconfig/network
- (set_ip4_config_from_resolv_conf): new function, parse a resolv.conf and
update an IP4 Config structure's settings from it
- (nm_system_device_get_system_config): if we're using static IP on this device,
get DNS info from current network profile
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@661 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Kay Sievers and Robert Love:
* configure.in
src/backends/Makefile.am
src/backends/NetworkManagerSuSE.c
- Add SuSE support
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@659 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* NetworkManager.h
- Add NMWirelessScanMethod enum for scan methods
* gnome/applet/applet-dbus-devices.c
- (nmwa_dbus_update_scanning_enabled_cb): remove
- (nmwa_dbus_update_scanning_enabled): remove
- (nmwa_dbus_update_devices): don't call nmwa_dbus_update_scanning_enabled() anymore
since it got removed
- (nmwa_dbus_enable_scanning): remove
* gnome/applet/applet-dbus-info.c
- (nmi_dbus_signal_update_scan_method): new function, signal NetworkManager to
update the wireless scanning method from NMI
- (nmi_dbus_get_wireless_scan_method): new function, return wireless scanning
method value to NetworkManager
- (nmi_dbus_info_message_handler): respond to the "getWirelessScanMethod" method call
* gnome/applet/applet-dbus-info.h
- Add prototype for nmi_dbus_signal_update_scan_method
* gnome/applet/applet.c
- (scanning_menu_update): new function, update one GtkCheckMenuItem from the
Wireless Scanning menu based on current wireless scan method
- (nmwa_menu_scanning_item_activate): new function, callback for GTK "activate"
signal for Wireless Scanning menu items, tell NetworkManager the new method
and update our menu items to make sure the right one is checked
- (nmwa_set_scanning_enabled_cb): remove
- (nmwa_context_menu_update): remove references to pause_scanning_item
- (nmwa_context_menu_create): remove pause_scanning_item, and add new Wireless
Scanning menu item
- (nmwa_gconf_get_wireless_scan_method): new method, pull wireless scanning method
from GConf
- nmwa_gconf_networks_notify_callback -> nmwa_gconf_info_notify_callback: generalize
so we get notified of preference values too
- (nmwa_get_instance): monitor GCONF_PATH_WIRELESS rather than GCONF_PATH_WIRELESS_NETWORKS
* gnome/applet/applet.h
- GCONF_PATH_WIRELESS added, one level below GCONF_PATH_WIRELESS_NETWORKS
- Add wireless scan method member to applet data
- Remove pause_scanning_item, add Wireless Scanning submenu
* src/NetworkManager.c
- (nm_data_new): default to NM_SCAN_METHOD_ON
- (main): grab scanning method from NMI if we can
* src/NetworkManagerDbus.c
- (nm_dbus_update_wireless_scan_method_cb): new function, callback from
nm_dbus_update_wireless_scan_method()
- (nm_dbus_update_wireless_scan_method): new function to grab scanning method
from NMI
- (nm_dbus_nmi_is_running): redundant function, removed
- (nm_dbus_signal_filter): trap "WirelessScanMethodUpdate" signal, grab scanning method
when NMI comes back
* src/NetworkManagerDevice.c
- (nm_device_is_activated): return TRUE if the device is activated
- (nm_device_wireless_scan): don't scan if the scan method is OFF, or if its AUTO
and we are activated
* src/nm-dbus-nm.c
- (nm_dbus_nm_set_scanning_enabled): removed
- nm_dbus_nm_get_scanning_enabled -> nm_dbus_nm_get_wireless_scan_method
- (nm_dbus_nm_methods_setup): remove [get | set] ScanningEnabled and add "getWirelessScanMethod"
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@658 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* NetworkManager.h
- Differentiate VPN config signals between bad VPN config options
and bad IP config
* gnome/applet/applet-dbus-info.h
- Add prototypes for wireless network and vpn connection update functions
* gnome/applet/applet-dbus.c
- (nmwa_dbus_filter): trap new VPN config error signals from NetworkManager
* gnome/applet/applet.c
- (nmwa_schedule_vpn_failure_dialog): new dialog text for new VPN config
error signals
- (nmwa_gconf_networks_notify_cb): re-enable wireless network change notify
propogation to NetworkManager
- (nmwa_gconf_vpn_connections_notify_cb): re-enable vpn connection change
notify propogation to NetworkManager
* src/NetworkManagerDbus.c
- (nm_dbus_update_one_allowed_network): make sure to specify which AP list we
are updating so a network can be removed from it if necessary
* src/vpn-manager/nm-vpn-manager.c
- (nm_vpn_manager_process_signal): trap new vpn config error signals
* vpn-daemons/vpnc/nm-vpnc-service.c
- (nm_vpnc_dbus_signal_failure): generalize function for all VPN error signals
- (nm_vpnc_dbus_signal_launch_failed): remove
- (nm_vpnc_dbus_signal_connect_failed): remove
- (nm_vpnc_helper_timer_cb): update for new generalized error signal function
- (nm_vpnc_schedule_helper_timer): increase timeout to 10s
- (vpnc_watch_cb): don't whine about exit code if vpnc exited cleanly, update
for new generalized error signal function, remove config file stuff
- (nm_vpnc_start_vpnc_binary): grab a stdin pipe to vpnc after spawning it so
we can write configuration options to it
- (nm_vpnc_config_file_generate): removed
- (nm_vpnc_config_write): write configuration options to the vpnc stdin pipe
- (nm_vpnc_config_options_validate): validate the config options we receive
from NetworkManager to block potential exploits
- (nm_vpnc_dbus_handle_start_vpn): call option validation function before
starting vpnc
- (nm_vpnc_dbus_process_helper_config_error): actually propogate config error
to NetworkManager
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@646 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Tomislav Vujec <tvujec@redhat.com>
* gnome/applet/applet-dbus-info.c
- (nmi_dbus_get_vpn_connection_routes): new function, pull routes out of
GConf and pass them to NetworkManager. New key is 'routes' under
the VPN connection, and should be a string list
* src/NetworkManagerSystem.c
- (nm_system_vpn_device_set_from_ip4_config): if user-defined routes exist,
set them on the device when we set the rest of the VPN config. Ensure
they are in the correct format since they are passed directly to the
command line.
* src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerDebian.c
- (nm_system_device_add_route_via_device_with_iface): new function
* src/vpn-manager/nm-dbus-vpn.c
- (nm_dbus_vpn_get_routes): grab VPN routes from NetworkManagerInfo
* src/vpn-manager/nm-vpn-manager.c
- (nm_vpn_manager_handle_ip4_config_signal): grab routes from NMI and pass
them into the IP4 config functions
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@637 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.[ch]
src/NetworkManagerPolicy.c
src/NetworkManager.c
src/nm-dbus-nm.c
- Remove the "just_added" parameter from nm_device_deactivate(). We no
longer send the DeviceNoLongerActive signal unconditionally, but only
when the device is actually active.
* dispatcher-daemon/NetworkManagerDispatcher.c
- (nmd_execute_scripts): convert to GLib directory functions from opendir(),
and simplify the logic
- (nmd_get_device_name): copy value from dbus reply so we don't segfault when
we free it later on
* initscript/RedHat/Makefile.am
initscript/RedHat/NetworkManagerDispatcher
- Add initscript for NetworkManagerDispatcher
Patch from Bill Moss:
* dispatcher-daemon/NetworkManagerDispatcher.c
- Remove IP4AddressChange signal code including nmd_get_device_ip4_address()
* src/NetworkManagerDbus.c
- (nm_dbus_signal_device_ip4_address_change): remove. If the device goes up,
and DeviceNowActive gets signaled, then the device has a new IP address
anyway. There's no need for a separate signal.
* src/NetworkManagerDevice.c
- (nm_device_update_ip4_address): Don't send IP4AddressChange signal
* src/NetworkManagerPolicy.c
- (nm_policy_activation_finish): Send DeviceNowActive signal when the device
activates successfully. This kind of went missing when I reworked the
activation code.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@634 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in
- Check for dhcdbd and error if its not found
* src/dhcp-manager/Makefile.am
src/dhcp-manager/nm-dhcp-manager.c
- Use path to dhcdbd that configure found
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@630 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManager.c
- (device_stop_and_free): Deactivate VPN connections before deactivating devices,
fixes a deadlock on shutdown with a VPN connection active. This function locks
the device list, as does nm_get_active_device() which is called from
nm_vpn_manager_deactivate_vpn_connection().
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@628 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* NetworkManager.h
- Add signals for VPN Launch and Connect failures
* gnome/applet/applet-dbus.c
- (nmwa_dbus_filter): Trap new VPN launch & connect failure signals
* gnome/applet/applet.c
- (nmwa_show_vpn_failure_dialog): generalize old nmwa_show_vpn_login_failure_dialog()
function to handle all VPN failure messages
- (nmwa_schedule_vpn_failure_dialog): generalize old nmwa_schedule_vpn_login_failure_dialog()
function to hanlde all VPN failure messages
- (show_warning_dialog): work around focus-stealing prevention
* gnome/applet/other-network-dialog.c
gnome/applet/passphrase-dialog.c
- (update_button_cb): Make sure the OK button is enabled when it should be, fixes
problem where it never enabled for ASCII Key and Hex Key types
* gnome/applet/wireless-applet.glade
- Add window title to Other Wireless Network Dialog
* src/vpn-manager/nm-dbus-vpn.c
- (nm_dbus_vpn_signal_vpn_failed): generalize old nm_dbus_vpn_signal_vpn_login_failed()
function to handle all VPN failure messages
* src/vpn-manager/nm-vpn-manager.c
- (nm_vpn_manager_process_signal): trap and proxy VPN launch & connect failure signals too
* vpn-daemons/vpnc/nm-vpnc-service.c
- (nm_vpnc_dbus_signal_launch_failed): new function
- (nm_vpnc_dbus_signal_connect_failed): new function
- (nm_vpnc_helper_timer_cb): signal connect failure on timeout
- (vpnc_watch_cb): signal connection failure when vpnc exits with connection failure
- (nm_vpnc_start_vpnc_binary): search a number of locations for vpnc
- (nm_vpnc_dbus_handle_start): send launch failure signal when we fail to launch vpnc
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@627 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerPolicy.c
- (nm_policy_activation_finish): Don't set NM_ACT_STAGE_ACTIVATED here, instead...
- (nm_policy_schedule_activation_finish): Set NM_ACT_STAGE_ACTIVATED here to
fix a situation where NM is told to terminate and the device stops activation,
but the main thread isn't aware of that because it would never have run
nm_policy_activation_finish() to set the ACTIVATED flag, because the main loop
had already quit.
* src/NetworkManagerDevice.c
- (nm_device_probe_wired_link_state): cosmetic fixes
- (nm_device_activate_stage5_ip_config_commit): Don't check link state if
we've failed to activate or been canceled.
- (nm_ac_test): nm_debug -> nm_info for "waiting for device to cancel" message
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@616 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerWireless.c
- (nm_wireless_qual_to_percent): Fix #if -> #ifdef, print out the "updated"
value of WEXT quality structures, and add a debug message when we cannot
determine any quality % at all
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@615 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/applet/applet-dbus-device.c
gnome/applet/applet-dbus-info.c
gnome/applet/applet-dbus.c
gnome/applet/applet.c
gnome/applet/applet.h
- (nmwa_get_device_for_nm_device) -> (nmwa_get_device_for_nm_path)
* gnome/applet/applet-dbus.c
- (nmwa_dbus_filter): trap DeviceCarrierOn/DeviceCarrierOff signals
so we notice when wired device's carriers come back on. Should
fix issue with wired devices being grayed out even if the cable
is in, for devices that support carrier detection.
* gnome/applet/applet.c
- (nmwa_driver_notify): bash focus-stealing prevention in the face
- (nmwa_act_stage_to_pixbuf): Clarify wireless ACT_STAGE_DEVICE_CONFIG
tooltip message
- (nmwa_menu_item_activate, nmwa_menu_add_device_item, nmwa_menu_item_data_free):
Fix situation where applet wouldn't respond to menu selections
* src/NetworkManager.c
src/NetworkManagerDevice.c
src/NetworkManagerDbus.c
src/NetworkManagerDbus.h
- (nm_dbus_signal_device_status_change) -> (nm_dbus_schedule_device_status_change_signal)
* src/NetworkManagerDbus.c
- (nm_dbus_send_network_not_found, nm_dbus_schedule_network_not_found_signal):
Remove, no longer used or relevant
- (nm_dbus_signal_device_status_change): Better signal enum->string matching
- (nm_dbus_schedule_device_status_change_signal): add
* src/NetworkManagerDevice.c
- (nm_device_worker_thread_stop): don't try to join a NULL worker thread
- (nm_device_set_link_active): Fix up switching for non-carrier-detect devices,
ie don't deactivate them unless explicitly told to by the user. Also send
CARRIER_OFF / CARRIER_ON signals when link changes
- (nm_device_set_essid, nm_device_set_enc_key, nm_device_is_up, nm_device_set_mode):
Don't print error message when device is no longer around
- (nm_device_deactivate): kill any current DHCP process attached to this device,
not just during activation
* src/NetworkManagerPolicy.c
- (nm_policy_auto_get_best_device): Ignore semi-supported devices completely from
auto-device-selection.
- (nm_policy_device_change_check): Don't interrupt semi-supported devices
* src/NetworkManagerSystem.c
- (nm_system_device_set_up_down_with_iface): Quiet first warning message when device
is no longer present (Bill Moss)
* src/backends/shvar.c
- (svOpenFile): Open read-only to make SELinux happy
* src/backends/NetworkManagerRedHat.c
- (nm_system_device_get_system_config): Use SYSCONFDIR rather than hardcoding
the path to the ifcfg-* files
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@613 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
