0.7 requires dbus 1.1 or greater (for system bus activation), so make that
explicit, and remove compat code for D-Bus 0.6 and earlier. Consolidate
the various glib pkgconfig checks into one, since most anything will require
gthread, glib, and gobject anyway. Fixup the docs makefile to be more
automake-compatible and let 'make clean' actually work correctly when
docs are built.
* src/dhcp-manager/nm-dhcp-manager.c
- (nm_dhcp_manager_get_ip4_config): clean up; update for changes to
NMIP4Config to support multiple IP addresses
* src/NetworkManagerUtils.c
- (nm_utils_merge_ip4_config): update for multiple IP addresses
* src/nm-ip4-config.c
src/nm-ip4-config.h
- Store a list of IPv4 address/netmask/gateway tuples
- (nm_ip4_config_get_gateway, nm_ip4_config_set_gateway,
nm_ip4_config_get_netmask, nm_ip4_config_set_netmask,
nm_ip4_config_get_broadcast, nm_ip4_config_set_broadcast,
nm_ip4_config_set_address): remove
- (nm_ip4_config_take_address, nm_ip4_config_add_address,
nm_ip4_config_replace_address, nm_ip4_config_get_num_addresses):
new functions; handle multiple IPv4 addresses
* src/nm-device.c
src/ppp-manager/nm-ppp-manager.c
src/vpn-manager/nm-vpn-connection.c
src/NetworkManagerPolicy.c
test/nm-tool.c
libnm-glib/libnm-glib-test.c
- update for changes to NMIP4Config for multiple IPv4 addresses
* src/NetworkManagerSystem.c
- (nm_system_device_set_ip4_route): don't add the route if any address
is on the same subnet as the destination
- (check_one_address): ignore the exact match, just match family and
interface index
- (add_ip4_addresses): add all IPv4 addresses in an NMIP4Config to
an interface
- (nm_system_device_set_from_ip4_config): use add_ip4_addresses()
- (nm_system_vpn_device_set_from_ip4_config): use add_ip4_addresses()
* introspection/nm-ip4-config.xml
- Remove 'address', 'gateway', 'netmask', and 'broadcast' properties
- Add 'addresses' property which is an array of (uuu) tuples of
address/netmask/gateway
* libnm-util/nm-setting-ip4-config.c
- (set_property): use ip-address <-> GValue converters from nm-utils.c
* libnm-glib/nm-ip4-config.c
libnm-glib/nm-ip4-config.h
- Handle D-Bus interface changes to support multiple IP addresses
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3637 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Remove exposure of wireless-tools mode types in the API.
* include/NetworkManager.h
- Define NM80211Mode enum
* introspection/generic-types.xml
- Describe NM_802_11_MODE enum
- Remove IW_MODE_* enum
* introspection/nm-access-point.xml
libnm-glib/nm-access-point.c
libnm-glib/nm-access-point.h
- 'mode' is now of type NM80211Mode, a DBUS_TYPE_UINT
* introspection/nm-device-802-11-wireless.xml
libnm-glib/nm-device-802-11-wireless.c
libnm-glib/nm-device-802-11-wireless.h
- 'mode' is now of type NM80211Mode, a DBUS_TYPE_UINT
* libnm-util/nm-setting-wireless.c
src/NetworkManagerAP.c
src/NetworkManagerAP.h
src/nm-device-802-11-wireless.c
src/nm-device-802-11-wireless.h
test/nm-tool.c
- Use NM80211Mode not IW_MODE_*
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3562 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Enhance nm-online based on a patch from Bill Nottingham.
* test/nm-online.c
- Add a '-q' option
- Add help messages and option summary
- Add long-format options
- Add a '-x' option to exit if NM isn't running or isn't connecting
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3561 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
- Remove the DOWN and CANCELLED device states
- Add UNMANAGED and UNAVAILABLE device states
- Document the device states
* introspection/nm-device.xml
src/nm-device-interface.c
src/nm-device-interface.h
- Add the 'managed' property
* test/nm-tool.c
- (detail_device): print out device state
* src/NetworkManagerSystem.h
src/backends/NetworkManagerArch.c
src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerFrugalware.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerMandriva.c
src/backends/NetworkManagerPaldo.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSlackware.c
src/backends/NetworkManagerSuSE.c
- (nm_system_device_get_system_config, nm_system_device_get_disabled
nm_system_device_free_system_config): remove; they were unused and
their functionality should be re-implemented in each distro's
system settings service plugin
* src/nm-gsm-device.c
src/nm-gsm-device.h
src/nm-cdma-device.c
src/nm-cdma-device.h
- (*_new): take the 'managed' argument
* src/nm-device.c
- (nm_device_set_address): remove, fold into nm_device_bring_up()
- (nm_device_init): start in unmanaged state, not disconnected
- (constructor): don't start device until the system settings service
has had a chance to figure out if the device is managed or not
- (nm_device_deactivate, nm_device_bring_up, nm_device_bring_down):
don't set device state here, let callers handle that as appropriate
- (nm_device_dispose): don't touch the device if it's not managed
- (set_property, get_property, nm_device_class_init): implement the
'managed' property
- (nm_device_state_changed): bring the device up if its now managed,
and deactivate it if it used to be active
- (nm_device_get_managed, nm_device_set_managed): do the right thing
with the managed state
* src/nm-hal-manager.c
- (wired_device_creator, wireless_device_creator, modem_device_creator):
take initial managed state and pass it along to device constructors
- (create_device_and_add_to_list): get managed state and pass to
type creators
* src/nm-device-802-11-wireless.c
- (real_can_activate): fold in most of
nm_device_802_11_wireless_can_activate()
- (can_scan): can't scan in UNAVAILABLE or UNMANAGED
- (link_timeout_cb): instead of deactivating, change device state and
let the device state handler to it
- (real_update_hw_address): clean up
- (state_changed_cb): when entering UNAVAILABLE state, schedule an idle
handler to transition to DISCONNECTED if the device isn't rfkilled
* src/nm-device-802-3-ethernet.c
- (set_carrier): move above callers and get rid of prototype
- (device_state_changed): when entering UNAVAILABLE state, schedule an
idle handler to transition to DISCONNECTED if the device has a
carrier
- (real_update_hw_address): clean up
- (link_timeout_cb, ppp_state_changed): change state instead of calling
deactivation directly as deactivation doesn't change state anymore
* src/NetworkManagerPolicy.c
- (schedule_activate_check): yay, remove wireless_enabled hack since
the NMManager and wireless devices work that out themselves now
- (device_state_changed): change to a switch and update for new device
states
- (device_carrier_changed): remove; device handles this now through
state changes
- (device_added): don't care about carrier any more; the initial
activation check will happen when the device transitions to
DISCONNECTED
* src/nm-manager.c
- (dispose): clear unmanaged devices
- (handle_unmanaged_devices): update unmanaged device list and toggle
the managed property on each device when needed
- (system_settings_properties_changed_cb): handle signals from the
system settings service
- (system_settings_get_unmanaged_devices_cb): handle callback from
getting the unmanaged device list method call
- (query_unmanaged_devices): ask the system settings service for its
list of unmanaged devices
- (nm_manager_name_owner_changed, initial_get_connections): get unmanaged
devices
- (manager_set_wireless_enabled): push rfkill state down to wireless
devices directly and let them handle the necessary state transitions
- (manager_device_state_changed): update for new device states
- (nm_manager_add_device): set initial rfkill state on wireless devices
- (nm_manager_remove_device): don't touch the device if it's unmanaged
- (nm_manager_activate_connection): return error if the device is
unmanaged
- (nm_manager_sleep): handle new device states correctly; don't change
the state of unavailable/unmanaged devices
* libnm-glib/nm-device-802-11-wireless.c
- (state_changed_cb): update for new device states
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3540 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Massive fixup of libnm-glib to:
a) have all objects (with the exception of VPN) cache their properties and
update them asynchronously on PropertiesChanged signals from NM
b) return internal const data for most attributes/properties instead of
allocated values that the caller must free
c) cache wrapped objects such that a given D-Bus path will always map to the
same GObject returned by libnm-glib
d) remove a few signals and move them to GObject property notifications
e) match recent NM D-Bus API changes for activation/deactivation
f) remove some private functions from libnm-glib headers
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3491 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/wireless-helper.h
include/Makefile.am
- One place for all the junk needed for #including wireless.h
* test/nm-tool.c
src/NetworkManagerAP.c
src/wpa.c
src/Makefile.am
libnm-util/nm-utils.c
libnm-util/nm-setting-wireless.c
libnm-glib/nm-device-802-11-wireless.c
libnm-glib/nm-access-point.c
libnm-glib/libnm-glib-test.c
- include wireless-helper.h, not iwlib.h
* configure.in
- Don't need libiw really, just need to check for wireless.h
* src/kernel-types.h
- Remove; used types moved into wpa.c
* src/nm-device-802-11-wireless.c
- (nm_device_802_11_wireless_update_signal_strength,
real_get_generic_capabilities, nm_device_802_11_wireless_get_mode,
nm_device_802_11_wireless_set_mode,
nm_device_802_11_wireless_get_frequency,
nm_device_802_11_wireless_get_ssid,
nm_device_802_11_wireless_set_ssid,
nm_device_802_11_wireless_get_bitrate,
nm_device_802_11_wireless_get_bssid,
nm_device_802_11_wireless_disable_encryption): use ioctl() directly
instead of iwlib functions
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3462 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Move the 'carrier' property from NMDevice to NMDevice8023Ethernet;
convert the libnm-glib NMDevice8023Ethernet to cached properties
* introspection/nm-device-802-3-ethernet.xml
- New 'Carrier' property
- New 'PropertiesChanged' signal
* introspection/nm-device.xml
- Remove 'Carrier' property
- Remove 'CarrierChanged' signal
* src/nm-device-interface.c
src/nm-device-interface.h
- (nm_device_interface_init): remove 'carrier' property and
'carrier-changed' signal
* src/nm-device.c
src/nm-device.h
- (nm_device_get_carrier, nm_device_set_carrier): remove
- (nm_device_activate_stage5_ip_config_commit): don't bother updating
the link here; wired device will handle that
- (handle_dhcp_lease_change): don't bother updating link here
- (get_property, nm_device_class_init): remove carrier property
* src/nm-device-802-11-wireless.c
- (real_update_link, nm_device_802_11_wireless_class_init): remove
real_update_link(); wireless devices don't use carrier at all
- (link_timeout_cb, supplicant_iface_state_cb_handler,
supplicant_iface_connection_state_cb_handler,
supplicant_mgr_state_cb_handler): remove anything to do with carrier
* src/nm-device-802-3-ethernet.c
src/nm-device-802-3-ethernet.h
- (nm_device_802_3_ethernet_carrier_on,
nm_device_802_3_ethernet_carrier_off, constructor): use set_carrier()
instead of nm_device_set_carrier()
- (device_state_changed): update link from sysfs on activation;
replaces real_update_link()
- (real_update_link): remove, replaced by device_state_changed()
- (nm_device_802_3_ethernet_get_carrier, set_carrier): new functions
- (nm_device_802_3_ethernet_get_speed): move up with other getters/setters
- (real_get_generic_capabilities, real_can_interrupt_activation): use
new get_carrier function
- (get_property): add 'carrier' property
- (nm_device_802_3_ethernet_class_init): add 'carrier' property and
hook into property-changed signal helper
* src/NetworkManagerPolicy.c
- (device_carrier_changed): will only ever be called with a wired device
- (device_added): only hook up to carrier-changed for wired devices
* libnm-glib/nm-device.c
libnm-glib/nm-device.h
- (constructor, nm_device_class_init): remove carrier-changed signal
- (device_carrier_changed_proxy): remove; unused
- (nm_device_get_carrier): remove; carrier a property of wired devices
* libnm-glib/nm-device-802-3-ethernet.c
libnm-glib/nm-device-802-3-ethernet.h
- Convert to cached properties like AP and Wireless objects
- (nm_device_802_3_ethernet_get_hw_address): now returns a 'const char *'
instead of a 'char *', return value should not be freed
- (nm_device_802_3_ethernet_get_carrier): return current carrier status
- (constructor): hook into properties-changed helper
- (set_property, get_property): new functions
- (nm_device_802_3_ethernet_class_init): export GObject properties
* test/nm-tool.c
- (detail_device): strdup the wired hardware address too since it's
cached now
* libnm-glib/libnm-glib-test.c
- (dump_wired): strdup the wired hardware address too since it's
cached now
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3428 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* test/libnm_glib_test.c
- (signal_handler, setup_signals): trap SIGINT and SIGTERM
- (main): set up signal handlers; call libnm_glib_shutdown
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3264 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Helmut Schaa <hschaa@suse.de> (and more bits from me)
* src/NetworkManagerAP.c
src/NetworkManagerAP.h
libnm-glib/nm-access-point.c
libnm-glib/nm-access-point.h
- Make 'rate' property a guint32 to better match with WEXT and
wpa_supplicant and to allow representation of higher bitrates
* src/nm-device-802-11-wireless.c
introspection/nm-device-802-11-wireless.xml
libnm-glib/nm-device-802-11-wireless.c
libnm-glib/nm-device-802-11-wireless.h
- Make 'bitrate' property a guint32 to match AP 'rate' property type
* src/nm-device-802-3-ethernet.c
src/nm-device-802-3-ethernet.h
introspection/nm-device-802-3-ethernet.xml
libnm-glib/nm-device-802-3-ethernet.c
libnm-glib/nm-device-802-3-ethernet.h
- Make 'speed' property a guint32 to match other speed/rate types
- Make nm_device_802_3_ethernet_get_speed() static
* test/nm-tool.c
- Update for the changes above
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3030 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Move ppp-manager over to dbus-glib. The big deal is that it was
the last piece of
code that used NM's own version of dbus signal handling and
custom dictionary
marshalling/unmarshalling. With this change, all that obsolete
code can disappear
and we get to maintain over 2000 lines less code.
* libnm-util/dbus-dict-helpers.c:
* libnm-util/dbus-dict-helpers.h: Remove.
* src/ppp-manager/nm-pppd-plugin.c: Convert it to use dbus-glib.
* src/ppp-manager/nm-pppd-plugin.xml: Implement.
* src/ppp-manager/nm-ppp-manager.c: Use dbus-glib instead of
* home-brewed dbus signal
handlers.
* src/nm-dbus-manager.c: Remove all the manual dbus signal
* handling.
* configure.in: Remove test/libnm-util/Makefile creation.
* test/Makefile.am: Remove libnm-util from SUBDIRS.
* test/libnm-util/: Remove the whole directory.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2965 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-access-point.c
libnm-glib/nm-access-point.h
- (nm_access_point_get_hw_address): return 'const char *', not 'char *'
because the value is cached internally now. Callers should not
free the internal value.
- Make signal name defines private
* test/nm-tool.c
libnm-glib/libnm-glib-test.c
- Don't free value returned from nm_access_point_get_hw_address()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2935 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-vpn-connection.[ch]:
* src/vpn-manager/nm-vpn-manager.[ch]:
* src/vpn-manager/nm-vpn-service.[ch]: Rewrite the vpn handling
* code. Using
dbus-glib, GObjects, signals etc.
* libnm-glib/nm-vpn-manager.[ch]:
* libnm-glib/nm-vpn-connection.[ch]: Now that the NM
* implementation changed
so much, rewrite these too.
* libnm-glib/Makefile.am: Add new files to build, build new
* binding files for
the new introspection files.
* libnm-glib/nm-client.[ch]: Remove all VPN related stuff from
* here.
* libnm-glib/nm-dbus-utils.[ch]: Renamed from nm-utils.[ch] that
* was shadowing
the header with the same name from libnm-utils.
* libnm-glib/nm-vpn-plugin.[ch]: Implement.
* libnm-util/Makefile.am: Add nm-utils.[ch] to build.
* introspection/nm-vpn-plugin.xml: Implement.
* introspection/nm-vpn-connection.xml: Implement.
* introspection/nm-vpn-manager.xml: Implement.
* src/NetworkManagerSystem.c
* (nm_system_vpn_device_set_from_ip4_config): Remove
the named manager argument, it can just as easily get it as the
caller.
(nm_system_vpn_device_unset_from_ip4_config): Ditto.
* src/vpn-manager/nm-dbus-vpn.[ch]: Remove.
* src/nm-dbus-manager.h: Fix up the name_owner signal signature.
* src/dhcp-manager/nm-dhcp-manager.c (garray_to_string): Remove,
* use one from
libnm-utils.
* libnm-util/nm-connection.c: Ditto.
* src/NetworkManagerMain.h: Remove, it's finally empty.
* configure.in: Remove utils/ from build.
* include/NetworkManagerVPN.h: Add some more defines to reduce
* the amount
of hard-coded strings.
* utils/: Move it over to libnm-util.
* test/Makefile.am: Link against libnm-util now that util/ is
* gone.
* dispatcher-daemon/Makefile.am: Ditto.
* src/Makefile.am: Ditto.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2798 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Remove NMAPSecurity objects, they are replaced with flags on the APs for
each AP's capabilities, and by NMConnection/NMSettings objects for user
defined connections.
* include/NetworkManager.h
- Redefine 802.11 security properties. There are now device capabilities
and AP flags and AP security flags. It was way to unclear before.
* src/Makefile.am
src/nm-ap-security-leap.h
src/nm-ap-security-leap.c
src/nm-ap-security-wpa-eap.c
src/nm-ap-security-wpa-eap.h
src/nm-ap-security-private.h
src/nm-ap-security-wpa-psk.c
src/nm-ap-security-wpa-psk.h
src/nm-ap-security-wep.c
src/nm-ap-security-wep.h
src/nm-ap-security.c
src/nm-ap-security.h
- Removed, to be replaced with NMConnection/NMSettings objects
* src/nm-dbus-nmi.c
src/nm-dbus-nmi.h
- Removed, to be replaced by code that talks to the new info daemon
interface and gets NMConnection/NMSettings objects
* src/backends/NetworkManagerSuSE.c
- Remove usage of NMAPSecurity; should be replaced by a system-level
info-daemon that does the same thing but talks the new info-daemon
D-Bus interface
* src/NetworkManagerAP.h
src/NetworkManagerAP.c
src/NetworkManagerAPList.c
libnm-glib/libnm-glib-test.c
- Remove usage of NMAPSecurity objects and adjust to new flags for
WPA/RSN
* libnm-glib/nm-access-point.c
libnm-glib/nm-access-point.h
introspection/nm-access-point.xml
test/nm-tool.c
- Adjust to new flags for AP security
* utils/nm-utils.c
utils/nm-utils.h
src/vpn-manager/nm-dbus-vpn.c
- Remove D-Bus pending call stuff from nm-utils and put it in the VPN
stuff which is the only place it's used
* src/nm-device-interface.c
src/nm-device-interface.h
introspection/nm-device.xml
src/nm-activation-request.c
src/nm-activation-request.h
src/nm-device.c
- Add a new 'specific_object' argument that hints to NM what actual
AP or other device-specific thing the connection should apply to.
NMConnection objects can apply to more than one actual device/AP.
* libnm-util/nm-connection.c
* libnm-util/nm-connection.h
- Add 'have_secrets" call stubs
* libnm-util/cipher.h
- Move NM_AUTH_TYPE_* defines here for now
* src/nm-device-802-11-wireless.c
- Remove usage of NMAPSecurity, to be replaced with NMConnection/
NMSettings objects
* src/NetworkManagerDbus.c
* src/NetworkManagerPolicy.c
- Remove usage of update_allowed_networks, should be pushing data in
a different manner
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2738 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
It's 2007. Remove support for drivers that don't support wireless scanning.
* test/nm-tool.c
include/NetworkManager.h
src/NetworkManagerUtils.c
src/NetworkManagerPolicy.c
src/nm-device-802-11-wireless.c
- Remove special handling for non-scanning devices and mark them
as unsupported/unhandled
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2726 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/libnm-glib.pc.in: Rename to libnm_glib.pc.in.
* libnm-glib/Makefile.am: Add legacy libnm_glib.[ch] to the
* build.
Rename the library from libnm-glib to libnm_glib to maintain the
library API
compatibility with 0.6 branch.
* Makefile.am: Remove gnome/ SUBDIR.
* gnome/libnm_glib/libnm_glib.[ch]: Move to libnm-glib/.
* src/Makefile.am: Remove the WPA_SUPPLICANT_BIN define.
* dispatcher-daemon/Makefile.am: Link the binary with
* libnm_glib.
* configure.in: Remove GNOME checks, NetworkManager does not
* need any of these
anymore.
Remove checks for wpa_supplicant binary, it's used over dbus.
Remove gnome/ directory files form AC_OUTPUT, that directory is
getting moved.
* test/Makefile.am: Remove define WPA_SUPPLICANT_BIN.
Link the binaries with libnm_glib.la.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2669 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/Makefile.am: Add NMObject to build, remove nm-utils.[ch].
* nm-utils.[ch]: Remove.
* libnm-glib/nm-object.c: Implement a base class for all libnm-glib dbus-aware
objects for easy property access and dbus connection handling.
* libnm-glib/nm-client.c: Derive from NMObject.
* libnm-glib/nm-device.c: Ditto.
* libnm-glib/nm-device-802-3-ethernet.c: Changes for being based on NMObject.
* libnm-glib/nm-device-802-11-wireless.c: Ditto.
* libnm-glib/nm-ip4-config.c: Ditto.
* libnm-glib/nm-access-point.c: Ditto.
* libnm-util/nm-connection.c (nm_connection_compare): Add a stub for connection
comparision. Currently used by the device activation code to determine if the new
activation is the same as the old one.
* src/nm-dbus-nmi.c (nm_dbus_get_user_key_for_network): Don't use the obsolete and
wrong way of getting the dbus path for AP. Fixes the issue where the applet isn't
able to ask password for the AP.
* src/nm-device.c (nm_device_activate): Change the logic here - instead of giving
up if the device is already connected, tear down it's connection (if it isn't the
same as new one) and start the activation.
* src/nm-manager.c: Add the beginnings of NMConnection storage and signals.
* src/NetworkManagerAP.c (nm_ap_init): Set the default values to AP memebers, fixes
the issue where all APs are always listed as encrypted.
* src/NetworkManagerDbus.c (nm_dbus_get_object_path_for_network): Remove. APs have
their own registered paths.
* test/nm-tool.c (detail_device): Don't try to get active network from wireless
device if it's not connected - dbus-glib will happily crash trying to marshal NULL.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2615 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/Makefile.am: Link with libnm-util to gain access to
NMConnection.
* libnm-glib/nm-device-802-11-wireless.c:
(nm_device_802_3_ethernet_activate): Remove.
* libnm-glib/nm-device-802-3-ethernet.c
(nm_device_802_3_ethernet_activate): Remove.
* libnm-glib/nm-device.c (nm_device_activate): Implement.
* src/nm-device-802-3-ethernet.c: Implement the new activation using
NMConnection.
* src/nm-device-802-11-wireless.c: Store an activation AP once the
activation has started.
Implement the new activation using NMConnection.
* src/nm-activation-request.c: Store a generic connection object instead
of a wireless-specific AP.
* src/NetworkManagerPolicy.c (create_connection): Implement. Depending
on device type, create a device specific connection object suitable for
device activation.
* src/nm-device.c (nm_device_activate): Re-implement. Call the device
specific check to validate the connection and on success start the
activation.
* src/nm-device-interface.h: Add a activate virtual function to the
interface definition.
* src/nm-device-interface.c (nm_device_interface_activate): Implement.
(impl_device_activate): Implement.
* introspection/nm-device.xml: Add a generic device activation interface
that accepts an abstract NMConnection structure that has device-specific
information in it.
* introspection/nm-device-802-3-ethernet.xml: Remove the wired-specific
activation interface.
* introspection/nm-device-802-11-wireless.xml: Remove the wireless-specific
activation interface.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2569 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
