* panel-applet/NMWirelessApplet.[ch]
- Add a context menu that contains:
Pause/Resume Wireless Scanning
Stop/Start All Wireless Devices
About...
- Grab active device strength off active device,
not its network
* panel-applet/NMWirelessAppletDbus.[ch]
- Add DBUS accessors for "getSupportsCarrierDetect", "setScanningEnabled",
"getScanningEnabled", "setWirelessEnabled", and "getWirelessEnabled"
- Update active device strength every 2 seconds, not every 1 second
* panel-applet/menu-info.c
- Only disable wired devices in the menu when they support carrier detection,
and don't currently have a link. Non-carrier-detect devices will always
remain choosable
* src/Makefile.am
src/NetworkManagerDbusUtils.[ch]
- Add new new dbus utils sources
* src/NetworkManager.c
- Fixes for new link detection, we no longer need to call nm_device_update_link_active()
with the boolean parameter
- Set scanning_enabled & wireless_enabled to TRUE
* src/NetworkManagerDbus.c
- Use new dbus util method dispatcher functions for org.freedesktop.NetworkManager methods
- Implement scanning & wireless enable/disable calls
- Remove the dbus vtable unregister handlers, weren't doing anything with them anyway
* src/NetworkManagerDevice.c
- New link detection stuff again...
o Create device's mainloop earlier (but don't run it earlier)
o Hook up new carrier-detect support stuff
o Add in the ethtool & mii support detection code
- Don't scan if scanning is disabled
* src/NetworkManagerPolicy.c
- Never automatically choose a device that doesn't support carrier detection
- Don't automatically choose a wireless device if wireless is disabled
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@416 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerWireless.c
- (nm_wireless_qual_to_percent): Fix up wireless quality calculations
to be in line with the WEXT quality specification
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@413 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Nathan Fredrickson <nathan@silverorange.com>
* Fix up compile for deprecation of libgnomeui
- Switch to <glib/gi18n.h> from <libintl.h>
- Remove <libgnomeui/libgnomeui.h> includes
- Use gtk_window_set_default_icon_from_file() rather than
gnome_window_set_default_icon_from_file()
* named/nm-named-manager.c
- (generate_named_conf): Fix return-nothing in non-void
function
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@409 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAPList.c
- (nm_ap_list_merge_scanned_ap): merge strength too
* src/NetworkManagerUtils.c
- (nm_lock_mutex, nm_register_mutex_desc): new calls to facilitate debugging
of locking issues by printing out prettier information than g_mutex_lock
- Print out names of mutexes registered with nm_register_mutex_desc()
- (nm_try_lock_mutex): don't do the waiting thing when trying to lock, causes
us to seemingly block here for too long
* src/NetworkManager.c
src/NetworkManagerAPList.c
src/NetworkManagerDevice.c
- Convert to using nm_lock_mutex/nm_unlock_mutex rather than the glib variants
so we get better debug information printed
* src/NetworkManagerDbus.c
- (nm_dbus_devices_handle_request): reduce usage of nm_device_need_ap_switch()
since it sometimes has locking side effects
- (nm_device_get_association_pause_value): Reduce 802.11a card pause value to 8s
from 10s
- (nm_device_need_ap_switch): If we can't acquire the scan lock, return saying
we don't need a switch. This gets called often enough that we can't block
until the scan mutex is acquired, because we'll block on device activation
and a few other things, which hangs main thread for too long.
* src/NetworkManagerPolicy.c
- (nm_policy_auto_get_best_device): reduce the possiblity that
nm_device_need_ap_switch() will be called
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@407 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c
- Display name of wireless network we are connecting to or connected to
in the tooltip of the applet
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@406 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDHCP.c
- Hopefully fix double-default-route problem by cleaning up the default
route added by DHCP code right before the DHCP transaction begins
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@405 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c
- (nmi_dbus_nmi_message_handler): make sure 'dialog' exists before using it
* src/NetworkManagerDevice.c
- (nm_device_new): Don't store the entire range struct, use only what we need
(which is currently avg_quality, max_quality, and frequencies). Also
zero device structure when we've free'd it to maybe expose errors down
the line.
- (nm_device_update_signal_strength): grab the scan mutex before getting
quality data from the card since quality will be useless during a scan.
Call updated wireless qual-to-percent function with values stored in
nm_device_new() earlier.
- Remove some unused functions (nm_device_get_max_quality(), nm_device_get_noise(),
nm_device_get_bad_crypt_packets())
- (nm_device_activate_wireless_adhoc): use new frequency values we go in
nm_device_new()
- (get_initial_auth_method): always use the Auth method that's in the allowed
list if available. Problem was this: when the WEP key is wrong, NM will
try OS then SK modes, and then get stuck in SK mode after that. This
should reset it.
- (nm_device_wireless_process_scan_results): work with new qual-to-percent
function
* src/NetworkManagerWireless.c
- (nm_wireless_qual_to_percent): try to make this function actually work and
mimic iwlib behavior. Use card's idea of quality divided by max_qual
if that's all present, otherwise fall back to signal-to-noise ratios.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@402 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* initscript/RedHat/NetworkManager
- Don't spit out sysctl stuff to console
* libnm_glib/libnm_glib.c
- (libnm_glib_init): call dbus_g_thread_init()
* panel-applet/NMWirelessAppletDbus.c
- (nmwa_dbus_worker): call dbus_g_thread_init()
* src/NetworkManager.c
- (main): call dbus_g_thread_init()
* src/NetworkManagerAPList.c
- (nm_ap_list_print_members): use LOG_ERR instead of LOG_DEBUG
so we can actually see what's there in a normal syslog
* src/NetworkManagerDevice.c
- (nm_device_activate_wireless): print out the "waiting for access point"
message only once, then say what access point we actually got after
the wait.
- (nm_device_need_ap_switch): If a scan is in progress when we're in this
function, wait until the scan is done. Scans may change the ESSID of
the card, making this function think we need to switch access points
- (nm_device_wireless_process_scan_results): for artificial access points
don't check against the card's ESSID, but the best_ap's ESSID. This
prevents collisions with the scanning code, which may change the card's
ESSID and cause the access point to get dropped from the device's AP
list. Also increase the keep-around time to 2m from 60s since the max
scan interval could be 60s in some cases.
* src/NetworkManagerPolicy.c
- (nm_policy_activation_finish): Don't add invalid MAC addresses to GConf
- (nm_policy_allowed_ap_list_update): When we update, make sure we copy over
the new properties and ESSIDs to the device's AP list. Fixes some races
between NM and NMI.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@401 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c
- (nmi_dbus_add_network_address): if the network doesn't yet exist in
GConf, make a minimal entry for it (essid & timestamp)
* src/NetworkManagerAPList.c
- (nm_ap_list_populate_from_nmi): Don't try to grab network data if
NetworkManagerInfo isn't running
* src/NetworkManagerDbus.[ch]
- (nm_dbus_nmi_is_running): new function
* src/NetworkManagerDevice.c
- (nm_device_wireless_force_use): Don't set the created AP's MAC
address to garbage.
* src/NetworkManagerPolicy.c
- (nm_policy_activation_finish): On successful activation, make sure
the "best" AP has a MAC address, and don't tell NMI to add the
current AP's MAC address to GConf if the AP is an Ad-hoc AP.
- (nm_policy_allowed_ap_list_update): Update a wireless card's "best"
access point after refreshing our allowed list if it doesn't already
have a "best" access point.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@400 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessAppletDbus.c
- (nmwa_dbus_filter): Fix dbus 0.23 ServiceOwnerChanged checks
so we check for NM_DBUS_SERVICE rather than not for it
* libnm_glib/libnm_glib.c
- (libnm_glib_dbus_filter): Fix for dbus 0.23, trapping
ServiceOwnerChanged signal
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@399 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in
- Check DBUS version in configure, and set the C macros
DBUS_VERSION_[MAJOR,MINOR,MICRO]
* info-daemon/NetworkManagerInfoDbus.c
- Remove #if 0-d section of code that quit NMI if NM went away.
* panel-applet/NMWirelessAppletDbus.c
- Trap the "ServiceOwnerChanged" signal that's new in dbus-0.23
* src/NetworkManager.c
src/NetworkManagerMain.h
src/NetworkManagerDbus.c
- Trap the "ServiceOwnerChanged" signal that's new in dbus-0.23
- Make updating of our Allowed Wireless Network lists from NMI
an idle function in the main thread now, with a high priority.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@398 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/gtkcellview.[ch]
panel-applet/menu-info.c
- Fix GTK version checks to be <= rather than <
* test/Makefile.am
- Include the libtool archive of libnm_glib rather than
trying to pull in the .so
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@397 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
src/NetworkManagerDevicePrivate.h
- Block nm_device_new() until our device's worker thread has had a
chance to start up. Fixes a race between main thread and worker
thread starting that caused activation requests to get lost.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@396 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* initscript/RedHat/NetworkManager
- Remove the ### BEGIN INIT INFO section, which caused chkconfig
to add the NM startup script at priority 50, which was
way too early
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/gtkcellview.[ch]
- Only compile these files for GTK 2.4 or lower, since
GtkCellView is now public in GTK 2.6. Fixes crasher
when choosing "Other Wireless Networks" from the panel
applet menu
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@391 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.[ch]
panel-applet/NMWirelessAppletDbus.c
panel-applet/menu-info.c
src/NetworkManagerDevice.c
- Disable wired devices in the menu when they have no link.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@389 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Cache last-known-good wireless authentication method in
NetworkManagerInfo, and use that method first during
wireless device activation. Should speed up devices that
need Shared Key authentication method since Open System is
now the default.
* Remove the hack to not do full activation on wired connections
that are active when we launch, it causes too many problems
with name resolution and was a hack in the first place.
* Re-work wireless device activation again somewhat to have a
clearer chain of events and to use last-known-good
authentication method of the access point. Also provide
better status throughout activation to ensure the applet
can tell the user exactly what's going on.
* Remove the "find wireless network" code and now simply attempt
to activate with that access point. This reduces the delay
between selecting "Other wireless Network" and actually
connecting to that network.
* Correctly stop the device's worker thread when its removed.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@388 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Add new icons, more frames of animation
* Remove some hacks to get the panel applet to display correct
status, an NM update will soon follow that will fix the
real issue.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@385 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c: #include <config.h> must be
the first include for working i18n. Also, don't include it in .h files
* panel-applet/NMWirelessApplet.h: Same
* panel-applet/NMWirelessAppletOtherNetworkDialog.c: Same
* panel-applet/menu-info.c: Same
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@384 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- Remove some debug messages
- Wrap others in #ifdef DEBUG/#endif
* src/NetworkManager.c
- Remove some debug messages
- Clarify some debug messages
- Remove code related to old single-thread wireless scanning
* src/NetworkManagerAP.[ch]
- New AP property "last_seen" to track how recently an AP was
found in a scan
- Start using 'const' more in function arguments
* src/NetworkManagerAPList.[ch]
- (nm_ap_list_merge_scanned_ap): new, selectively update attributes
of an AP found in an AP list from a source AP, or if not found
in the list add the source AP
- (nm_ap_list_combine): remove, no longer needed
* src/NetworkManagerDevice.c
- Each device now has a "worker" thread from start to end of its life.
Scanning for wireless devices now happens in that thread,
not in a single "wireless scanning thread" for all devices as
previously. Activation consists of adding an idle handler to the
thread's main loop/context, which gets run at the next available
opportunity.
- Wireless scanning is also simplified, there is now only one list of
access points per wireless device, and APs older than 60s are
removed from the list. Previously, we kept results for the last
3 scans and merged whole lists, which was complicated.
- Cleaned up activation debug messages.
- Wireless activation and access-point search routines now use Open System
authentication before trying Shared Key.
- Removed some code in nm_device_update_best_ap() that could cause cards
to loose their link to the access point.
- Scanning now uses a backoff algorithm, where the inverval becomes
progressively longer between scans when the list of scanned access
points doesn't change. A change will revert to the shortest scan
interval (20s).
* src/NetworkManagerWireless.[ch]
- Remove code related to old single-thread wireless scanning
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@382 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* named/nm-named-manager.c (generate_named_conf): Many fixes
to config file generation.
(safer_kill): Remove, was too much trouble for little gain.
(nm_named_manager_start): Run named as NM_NAMED_USER.
* configure.in: Add option --with-named-user.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@380 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from ed@catmur.co.uk (Ed Catmur)
* named/nm-named-manager.c: Add "context" property.
Use it to add child watch source in specific GMainContext.
* src/NetworkManager.c (nm_data_new): Initialize
named with correct main context. Start named only
after forking.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@377 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* named/nm-named-manager.c (generate_named_conf): Write config
and pid files into NM_NAMED_DATA_DIR; this allows things to
work better with FC3 named SELinux policy. Also fix up silly
format error.
* configure.in: Add --with-named-dir option.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@376 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in: Make named support require passing --with-named.
* named/nm-named-manager.c: Support writing resolv.conf directly
without running named.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@375 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* named/nm-named-manager.c
- Use syslog(LOG_WARNING) rather than g_warning() (gnome.org #163961)
* src/NetworkManagerDevice.c
- Rework wireless link detection code to be more reliable
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@374 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
