Previously, both nm_setting_connection_add_permission() and the GObject
property setter would merely assert that the provided values are valid
(and otherwise don't do anything). That is bad for handling errors.
For example, we use the property setter to initialize the setting from
keyfile and GVariant (D-Bus). That means, if a user provides an invalid
permissions value, we would emit a g_critical() assertion failure, but
otherwise ignore the configuration. What we instead need to do is to
accept the value, and afterwards fail verification. That way, a proper error
message can be generated.
$ mcli connection add type ethernet autoconnect no ifname bogus con-name x connection.permissions 'bogus:'
(process:429514): libnm-CRITICAL **: 12:12:00.359: permission_new: assertion 'strchr (uname, ':') == NULL' failed
(process:429514): libnm-CRITICAL **: 12:12:00.359: nm_setting_connection_add_permission: assertion 'p != NULL' failed
Connection 'x' (2802d117-f84e-44d9-925b-bfe26fd85da1) successfully added.
$ $ nmcli -f connection.permissions connection show x
connection.permissions: --
While at it, also don't track the permissions in a GSList. Tracking one
permission in a GSList requires 3 allocations (one for the user string,
one for the Permission struct, and one for the GSList struct). Instead,
use a GArray. That is still not great, because GArray cannot be embedded
inside NMSettingConnectionPrivate, so tracking one permission also
requires 3 allocations (which is really a fault of GArray). So, GArray
is not better in the common case where there is only one permissions. But even
in the worst case (only one entry), GArray is no worse than GSList.
Also change the API of nm_setting_connection_add_permission().
Previously, the function would assert that the arguments are in
a certain form (strcmp (ptype, "user") == 0), but still document
the such behaviors like regular operation ("[returns] %FALSE if @ptype
or @pitem was invalid"). Don't assert against the function arguments.
Also, if you first set the user to "fo:o", then
nm_setting_connection_add_permission() would accept it -- only at
a later phase, the property setter would assert against such values.
Also, the function would return %FALSE both if the input value was
invalid (an error) and if the value already existed. I think the
function should not treat a duplicate entry like a badly formatted
input.
Now the function does much less asserting of the arguments, but will
return %FALSE only if the values are invalid. And it will silently ignore
duplicate entries.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/636
Run:
./contrib/scripts/nm-code-format.sh -i
./contrib/scripts/nm-code-format.sh -i
Yes, it needs to run twice because the first run doesn't yet produce the
final result.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
A profile can configure "connection.wait-device-timeout" to indicate
that startup complete is blocked until a suitable device around.
This is useful for NetworkManager-wait-online and initrd mode.
Previously, we looked at NMPlatform whether a link with matching
interface-name was present. That is wrong because it cannot handle
profiles that rely on "ethernet.mac-address" setting or other "match"
settings. Also, the mere presence of the link does not yet mean
that the NMDevice was created and ready. In fact, there is a race here:
NMPlatform indicates that the device is ready (unblocking NMSettings),
but there is no corresponding NMDevice yet which keeps NetworkManager
busy to block startup complete.
Rework this. Now, only check whether there is a compatible device for
the profile.
Since we wait for compatible devices, it works now not only for the
interface name. Note that we do some optimizations so that we don't have
to re-evaluate all profiles (w.r.t. all devices) whenever something on the
device changes: we only care about this when all devices finally become
ready.
Also, we no longer start the timeout for "connection.wait-device-timeout"
when the profile appears. Instead, there is one system-wide start time
(NMSettingsPrivate.startup_complete_start_timestamp_msec). That simplifies
code and makes sense: we start waiting when NetworkManager is starting, not
when the profile gets added. Also, we wait for all profiles to become
ready together.
Conceptionally, the MUD URL really depends on the device, and not so
much the connection profile. That is, when you have a specific IoT
device, then this device probably should use the same MUD URL for all
profiles (at least by default).
We already have a mechanism for that: global connection defaults. Use
that. This allows a vendor drop pre-install a file
"/usr/lib/NetworkManager/conf.d/10-mud-url.conf" with
[connection-10-mud-url]
connection.mud-url=https://example.com
Note that we introduce the special "connection.mud-url" value "none", to
indicate not to use a MUD URL (but also not to consult the global connection
default).
For one, the setters sd_dhcp_client_set_mud_url() and sd_dhcp6_client_set_request_mud_url()
assert that the value honors these settings. So, we must never pass such values to the
function. Also, before calling n_dhcp4_client_probe_config_append_option()
the code doesn't check whether the URL is short enough. That would be
a bug (unless we ensure that the property is valid from the beginning).
In general, it is necessary to strictly validate the parameter.
Also, returning NM_SETTING_VERIFY_NORMALIZABLE_ERROR for a property that does
not get normalized is a bug.
Don't spread the validation for the interface name between multiple
places. There should be one place only, so when you search for how
this property gets verified, you can find the single place.
That requires to move the special handling for OVS interfaces to
NMSettingConnection.
Since we already have _nm_setting_ovs_interface_verify_interface_type(),
that is easy.
The interface-name property has several deprecated aliases, like
"bridge.interface-name". For backward compatibility, we keep handling
them.
In particular, the "missing_from_dbus_fcn" handler is set. This handles
the case where GVariant only contains the deprecated form, but not
"connection.interface-name".
Previously, from_dbus_fcn() would check whether the deprecated form was
present, and -- only if that form was invalid -- prefer it. The idea was
to fail validation if the deprecated property was invalid.
I think that is not necessary. Just completely ignore the deprecated property,
if the new property is present.
What might make sense is to check whether the deprecated and the new
form are both present, that they are identical. However, I don't think
that is worth the effort.
OVS bridges and ports do not have the length limitation of 15 bytes, the
only requirements are that all chars must be alphanumeric and not be
forward or backward slashes.
For OVS interfaces only 'patch' types do not have the length limit, all
the other types do (according to whether they have a corresponding
kernel link or not).
Add related unit test.
https://bugzilla.redhat.com/show_bug.cgi?id=1788432
nm_utils_is_valid_iface_name() is a public API of libnm-core, let's use
our internal API.
$ sed -i 's/\<nm_utils_is_valid_iface_name\>/nm_utils_ifname_valid_kernel/g' $(git grep -l nm_utils_is_valid_iface_name)
G_PARAM_CONSTRUCT cause to explicitly initialize the property during
object construction. This is an unnecessary overhead that we can easily
avoid.
The overhead is because G_PARAM_CONSTRUCT parameters are always set with
g_object_set() before calling constructed(). Even if they are not specified
during g_object_new(), in which case it calls set with the property's default
value. This also requires g_object_new() to iterate all properties to
find and sort the construct properties.
NMSetting are supposed to be simple classes. They don't need to have
their properties initialized before object construction completes.
Especially if the default values are NULL or zero, in which case there
is nothing to do. If the default value is not NULL or zero, we need
to initialize the field instead in the nm_setting*_init() function.
LLMNR and mDNS settings can have their global default value configured
in "NetworkManager.conf".
Global default values should work the way that all regular values of the property
can be configured explicitly in the connection profile. The special "default" value
only indicates to allow lookup of the global default, but it should not have a
meaning of its own.
Note that if mDNS/LLMNR settings are left unspecified, we will set the
argument to SetLinkMulticastDNS() and SetLinkLLMNR() functions to "",
which means that systemd-resolved decides on a default. Also, depending
on the DNS plugin, the default value differs. This is all fine however.
In this case, the ultimate default value depends on other things (like
the DNS plugin), but each possible value is in fact explicitly
configurable. We also do that for "ipv6.ip6-privacy".
Anyway, cleanup the documentation a bit and try to better explain what
the default is.
Initscripts already honor the DEVTIMEOUT variable (rh #1171917).
Don't make this a property only supported by initscripts. Every
useful property should also be supported by keyfile and it should
be accessible via D-Bus.
Also, I will soon drop NMSIfcfgConnection, so handling this would
require extra code. It's easier when DEVTIMEOUT is a regular property of
the connection profile.
The property is not yet implemented. ifcfg-rh still uses the old
implementation, and keyfile is not yet adjusted. Since both keyfile
and ifcfg-rh will both be rewritten soon, this property will be
implemented then.
We no longer add these. If you use Emacs, configure it yourself.
Also, due to our "smart-tab" usage the editor anyway does a subpar
job handling our tabs. However, on the upside every user can choose
whatever tab-width he/she prefers. If "smart-tabs" are used properly
(like we do), every tab-width will work.
No manual changes, just ran commands:
F=($(git grep -l -e '-\*-'))
sed '1 { /\/\* *-\*- *[mM]ode.*\*\/$/d }' -i "${F[@]}"
sed '1,4 { /^\(#\|--\|dnl\) *-\*- [mM]ode/d }' -i "${F[@]}"
Check remaining lines with:
git grep -e '-\*-'
The ultimate purpose of this is to cleanup our files and eventually use
SPDX license identifiers. For that, first get rid of the boilerplate lines.
We have certain artificial properties that not only depend on one
property alone or that depend on a property in another(!) setting.
For that, we have synth_func.
Other than that, synth_func and get_func are really fundamentally
similar and should be merged. That is because the distinction whether a
property value is "synthetized" or just based on a plain property is
minor. It's better to have the general concept of "convert property to
GVariant" in one form only.
Note that compare_property() is by default implemented based
on get_func. Hence, if get_func and synth_func get merged,
compare_property() will also require access to the NMConnection.
Also it makes some sense: some properties are artificial and actually
stored in "another" setting of the connection. But still, the property
descriptor for the property is in this setting. The example is the
"bond.interface-name" which only exists on D-Bus. It's stored as
"connection.interface-name".
I don't really like to say "exists on D-Bus only". It's still a valid
property, despite in NMSetting it's stored somehow differently (or not
at all). So, this is also just a regular property for which we have a
property-info vtable.
Does it make sense to compare such properties? Maybe. But the point is that
compare_property() function needs sometimes access to the entire
connection. So add the argument.
Order the code in our common way. No other changes.
- ensure to include the main header first (directly after
"nm-default.h").
- reorder function definitions: get_property(), set_property(),
*_init(), *_new(), finalize(), *_class_init().
NMSetting's compare_property() has and had two callers:
nm_setting_compare() and nm_setting_diff().
compare_property() accepts a NMSettingCompareFlags argument, but
at the same time, both callers have another complex (and
inconsistent!) set of pre-checks for shortcuting the call of
compare_property(): should_compare_prop().
Merge should_compare_prop() into compare_property(). This way,
nm_setting_compare() and nm_setting_diff() has less additional
code, and are simpler to follow. Especially nm_setting_compare()
is now trivial. And nm_setting_diff() is still complicated, but
not related to the question how the property compares or whether
it should be compared at all.
If you want to know whether it should be compared, all you need to do
now is follow NMSettingClass.compare_property().
This changes function pointer NMSettingClass.compare_property(),
which is public API. However, no user can actually use this (and shall
not!), because _nm_setting_class_commit_full() etc. is private API. A
user outside of libnm-core cannot create his/her own subclasses of
NMSetting, and never could in the past. So, this API/ABI change doesn't
matter.
We already had "${DEVICE}" which uses the interface name.
In times of predictable interface naming, that works well.
It allows the user to generate IDs per device which don't
change when the hardware is replaced.
"${MAC}" is similar, except that is uses the permanent MAC
address of the device. The substitution results in the empty
word, if the device has no permanent MAC address (like software
devices).
The per-device substitutions "${DEVICE}" and "${MAC}" are especially
interesting with "connection.multi-connect=multiple".
After an update of the connection.mdns property, a reactivation is
needed to apply the new value.
Also, the ifcfg-rh variable name was wrong.
Fixes: 2e2ff6f27a
NMSetting internally already tracked a list of all proper GObject properties
and D-Bus-only properties.
Rework the tracking of the list, so that:
- instead of attaching the data to the GType of the setting via
g_type_set_qdata(), it is tracked in a static array indexed by
NMMetaSettingType. This allows to find the setting-data by simple
pointer arithmetic, instead of taking a look and iterating (like
g_type_set_qdata() does).
Note, that this is still thread safe, because the static table entry is
initialized in the class-init function with _nm_setting_class_commit().
And it only accessed by following a NMSettingClass instance, thus
the class constructor already ran (maybe not for all setting classes,
but for the particular one that we look up).
I think this makes initialization of the metadata simpler to
understand.
Previously, in a first phase each class would attach the metadata
to the GType as setting_property_overrides_quark(). Then during
nm_setting_class_ensure_properties() it would merge them and
set as setting_properties_quark(). Now, during the first phase,
we only incrementally build a properties_override GArray, which
we finally hand over during nm_setting_class_commit().
- sort the property infos by name and do binary search.
Also expose this meta data types as internal API in nm-setting-private.h.
While not accessed yet, it can prove beneficial, to have direct (internal)
access to these structures.
Also, rename NMSettingProperty to NMSettInfoProperty to use a distinct
naming scheme. We already have 40+ subclasses of NMSetting that are called
NMSetting*. Likewise, NMMetaSetting* is heavily used already. So, choose a
new, distinct name.
Previously, each (non abstract) NMSetting class had to register
its name and priority via _nm_register_setting().
Note, that libnm-core.la already links against "nm-meta-setting.c",
which also redundantly keeps track of the settings name and gtype
as well.
Re-use NMMetaSettingInfo also in libnm-core.la, to track this meta
data.
The goal is to get rid of private data structures that track
meta data about NMSetting classes. In this case, "registered_settings"
hash. Instead, we should have one place where all this meta data
is tracked. This was, it is also accessible as internal API,
which can be useful (for keyfile).
Note that NMSettingClass has some overlap with NMMetaSettingInfo.
One difference is, that NMMetaSettingInfo is const, while NMSettingClass
is only initialized during the class_init() method. Appart from that,
it's mostly a matter of taste, whether we attach meta data to
NMSettingClass, to NMMetaSettingInfo, or to a static-array indexed
by NMMetaSettingType.
Note, that previously, _nm_register_setting() was private API. That
means, no user could subclass a functioning NMSetting instance. The same
is still true: NMMetaSettingInfo is internal API and users cannot access
it to create their own NMSetting subclasses. But that is almost desired.
libnm is not designed, to be extensible via subclassing, nor is it
clear why that would be a useful thing to do. One day, we should remove
the NMSetting and NMSettingClass definitions from public headers. Their
only use is subclassing the types, which however does not work.
While libnm-core was linking already against nm-meta-setting.c,
nm_meta_setting_infos was unreferenced. So, this change increases
the binary size of libnm and NetworkManager (1032 bytes). Note however
that roughly the same information was previously allocated at runtime.
- Don't use @parent_class name. This local variable (and @object_class) is
the class instance up-cast to the pointer types of the parents. The point
here is not that it is the direct parent. The point is, that it's the
NMSettingClass type.
Also, it can only be used inconsistently, in face of NMSettingIP4Config,
who's parent type is NMSettingIPConfig. Clearly, inside
nm-setting-ip4-config.c we wouldn't want to use the "parent_class"
name. Consistently rename @parent_class to @setting_class.
- Also rename the pointer to the own class to @klass. "setting_class" is also the
wrong name for that, because the right name would be something like
"setting_6lowpan_class".
However, "klass" is preferred over the latter, because we commonly create new
GObject implementations by copying an existing one. Generic names like "klass"
and "self" inside a type implementation make that simpler.
- drop useless comments like
/* virtual functions */
/* Properties */
It's better to logically and visually structure the code, and avoid trival
remarks about that. They only end up being used inconsistently. If you
even need a stronger visual separator, then an 80 char /****/ line
should be preferred.
Add a new option that allows to activate a profile multiple times
(at the same time). Previoulsy, all profiles were implicitly
NM_SETTING_CONNECTION_MULTI_CONNECT_SINGLE, meaning, that activating
a profile that is already active will deactivate it first.
This will make more sense, as we also add more match-options how
profiles can be restricted to particular devices. We already have
connection.type, connection.interface-name, and (ethernet|wifi).mac-address
to restrict a profile to particular devices. For example, it is however
not possible to specify a wildcard like "eth*" to match a profile to
a set of devices by interface-name. That is another missing feature,
and once we extend the matching capabilities, it makes more sense to
activate a profile multiple times.
See also https://bugzilla.redhat.com/show_bug.cgi?id=997998, which
previously changed that a connection is restricted to a single activation
at a time. This work relaxes that again.
This only adds the new property, it is not used nor implemented yet.
https://bugzilla.redhat.com/show_bug.cgi?id=1555012
