- All internal source files (except "examples", which are not internal)
should include "config.h" first. As also all internal source
files should include "nm-default.h", let "config.h" be included
by "nm-default.h" and include "nm-default.h" as first in every
source file.
We already wanted to include "nm-default.h" before other headers
because it might contains some fixes (like "nm-glib.h" compatibility)
that is required first.
- After including "nm-default.h", we optinally allow for including the
corresponding header file for the source file at hand. The idea
is to ensure that each header file is self contained.
- Don't include "config.h" or "nm-default.h" in any header file
(except "nm-sd-adapt.h"). Public headers anyway must not include
these headers, and internal headers are never included after
"nm-default.h", as of the first previous point.
- Include all internal headers with quotes instead of angle brackets.
In practice it doesn't matter, because in our public headers we must
include other headers with angle brackets. As we use our public
headers also to compile our interal source files, effectively the
result must be the same. Still do it for consistency.
- Except for <config.h> itself. Include it with angle brackets as suggested by
https://www.gnu.org/software/autoconf/manual/autoconf.html#Configuration-Headers
- "gsystem-local-alloc.h" and <gio/gio.h> are already included via
"nm-default.h". No need to include them separately.
- include "nm-macros-internal.h" via "nm-default.h" and drop all
explict includes.
- in the modified files, ensure that we always include "config.h"
and "nm-default.h" first. As second, include the header file
for the current source file (if applicable). Then follow external
includes and finally internal nm includes.
- include nm headers inside source code files with quotes
- internal header files don't need to include default headers.
They can savely assume that "nm-default.h" is already included
and with it glib, nm-glib.h, nm-macros-internal.h, etc.
Add a new 'ignore' option to NMSettingWired.wake-on-lan which disables
management of wake-on-lan by NetworkManager (i.e. the pre-existing
option will not be touched). Also, change the default behavior to be
'ignore' instead of 'disabled'.
https://bugzilla.gnome.org/show_bug.cgi?id=755182
Backport to 1.0.6 the following symbols:
- nm_setting_wired_get_wake_on_lan
- nm_setting_wired_get_wake_on_lan_password
- nm_setting_wired_wake_on_lan_get_type
added to 1.0.6 with commit d449d823046ac02f19d086575a19be7f40278bd0
The localization headers are now included via "nm-default.h".
Also fixes several places, where we wrongly included <glib/gi18n-lib.h>
instead of <glib/gi18n.h>. For example under "clients/" directory.
Move the settings/plugins doc generation from libnm-util to
libnm-core, since libnm-util isn't being updated for all new
properties.
With this commit, the keyfile and ifcfg-rh documentation is basically
unchanged, except that deprecated properties are now gone, and new
properties have been added, and the sections are in a different order.
(generate-plugin-docs.pl just outputs the settings in Makefile order,
and they were unsorted in libnm-util, but are sorted in libnm-core).
The settings documentation used for nm-settings.5, the D-Bus API docs,
and the nmcli help is changed a bit more at this point, and mostly for
the worse, since the libnm-core setting properties don't match up with
the D-Bus API as well as the libnm-util ones do. To be fixed...
(I also removed the "plugins docs" line in each plugin docs comment
block while moving them, since those blocks will be used for more than
just plugins soon, and it's sort of obvious anyway.)
All the old "const GByteArray" methods got changed to return a GBytes
instead, but since they aren't declared "const" any more, we need to
explicitly annotate them "(transfer none)".
Also, the scanner apparently doesn't recognize that an (out)
"const char **" is "(transfer none)", so annotate that in two places
too
Libraries need to include <gi18n-lib.h>, not <gi18n.h>, so that _()
will get defined to "dgettext (GETTEXT_DOMAIN, string)" rather than
"gettext (string)" (which will use the program's default domain, which
works fine for programs in the NetworkManager tree, but not for
external users). Likewise, we need to call bindtextdomain() so that
gettext can find the translations if the library is installed in a
different prefix from the program using it (and
bind_textdomain_codeset(), so it will know the translations are in
UTF-8 even if the locale isn't).
(The fact that no one noticed this was broken before is because the
libraries didn't really start returning useful translated strings much
until 0.9.10, and none of the out-of-tree clients have been updated to
actually show those strings to users yet.)
config.h should be included from every .c file, and it should be
included before any other include. Fix that.
(As a side effect of how I did this, this also changes us to
consistently use "config.h" rather than <config.h>. To the extent that
it matters [which is not much], quotes are more correct anyway, since
we're talking about a file in our own build tree, not a system
include.)
nm_setting_verify() took a GSList of other NMSettings, but really it
would just be simpler all around to pass the NMConnection instead...
This means that several formerly NMSetting-branded functions that
operated on lists-of-settings now get replaced with
NMConnection-branded functions instead.
Each setting type was defining its own error type, but most of them
had exactly the same three errors ("unknown", "missing property", and
"invalid property"), and none of the other values was of much use
programmatically anyway.
So, this commit merges NMSettingError, NMSettingAdslError, etc, all
into NMConnectionError. (The reason for merging into NMConnectionError
rather than NMSettingError is that we also already have
"NMSettingsError", for errors related to the settings service, so
"NMConnectionError" is a less-confusable name for settings/connection
errors than "NMSettingError".)
Also, make sure that all of the affected error messages are localized,
and (where appropriate) prefix them with the relevant property name.
Renamed error codes:
NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND
NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET
Remapped error codes:
NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING
NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY
Dropped error codes (were previously defined but unused):
NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING
NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED
NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING
NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED
NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING
NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING
NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
In preparation for porting to GDBus, make nm_connection_to_dbus(),
etc, represent connections as GVariants of type 'a{sa{sv}}' rather
than as GHashTables-of-GHashTables-of-GValues.
This means we're constantly converting back and forth internally, but
this is just a stepping stone on the way to the full GDBus port, and
all of that code will go away again later.
Change all DBUS_TYPE_G_MAP_OF_STRING properties to G_TYPE_HASH_TABLE,
with annotations indicating they are string->string. Not much outside
libnm-core needs to changed for this, since DBUS_TYPE_G_MAP_OF_STRING
was already represented as a hash table.
(One change needed within libnm-core is that we now need to copy the
hash tables in get_property(), or else the caller will receive a
reffed copy of the object's own hash table, which we don't want.)
Change all DBUS_TYPE_G_LIST_OF_STRING and DBUS_TYPE_G_ARRAY_OF_STRING
properties to G_TYPE_STRV, and update everything accordingly.
(This doesn't actually require using
_nm_setting_class_transform_property(); dbus-glib is happy to transform
between 'as' and G_TYPE_STRV.)
Make all mac-address properties (including NMSettingBluetooth:bdaddr,
NMSettingOlpcMesh:dhcp-anycast-addr, and NMSettingWireless:bssid) be
strings, using _nm_setting_class_transform_property() to handle
translating to/from binary form when dealing with D-Bus.
Update everything accordingly for the change, and also add a test for
transformed setting properties to test-general.
NMParamSpecSpecialized existed basically to provide a version of
GParamSpecBoxed that could compare dbus-glib-valued properties
correctly.
However, g_param_values_cmp() was only used by NM directly in one
place (NMSetting's compare_property()), and we don't actually need to
indirect through GParamSpec there; we could just call
NMParamSpecSpecialized's value-comparison function directly.
So, change all NMParamSpecSpecialized properties to GParamSpecBoxed,
rename the _gvalues_compare() function it used to
"nm_property_compare()", and use that from NMSetting.
(g_param_values_cmp() also gets used internally by
g_param_value_defaults(), but all NMParamSpecSpecialized properties
have a default value of NULL, so GParamSpecBoxed's pointer-equality
check will do the job just fine there.)
Simplify the use of _nm_register_setting() by having it splice
together various symbol names itself rather than requiring them to be
specified explicitly, and extend it to also ensure that the type's
corresponding error type is registered (allowing one to find it via
g_type_from_name() if necessary).
Include <linux/if_ether.h> and <linux/if_infiniband.h> from
nm-utils.h, to get ETH_ALEN and INFINIBAND_ALEN, and remove those
includes (as well as <net/ethernet.h> and <netinet/ether.h>, and
various headers that had been included to get the ARPHRD_* constants)
from other files where they're not needed now.
Lots of old code used struct ether_addr to store hardware addresses,
and ether_aton() to parse them, but more recent code generally uses
guint8 arrays, and the nm_utils_hwaddr_* methods, to be able to share
code between ETH_ALEN and INFINIBAND_ALEN cases. So update the old
code to match the new. (In many places, this ends up getting rid of
casts between struct ether_addr and guint8* anyway.)
(Also, in some places, variables were switched from struct ether_addr
to guint8[] a while back, but some code still used "&" when referring
to them even though that's unnecessary now. Clean that up.)
Drop the arptype-based nm_utils_hwaddr funcs, and rename the
length-based ones to no longer have _len in their names. This also
switches nm_utils_hwaddr_atoba() to using a length rather than an
arptype, and adds a length argument to nm_utils_hwaddr_valid() (making
nm_utils_hwaddr_valid() now a replacement for nm_utils_hwaddr_aton()
in some places, where we were only using aton() to do validity
checking).
Add NetworkManager.h, which includes all of the other NM header, and
require all external users of libnm to use that rather than the
individual headers.
(An exception is made for nm-dbus-interface.h,
nm-vpn-dbus-interface.h, and nm-version.h, which can be included
separately.)
This commit begins creating the new "libnm", which will replace
libnm-util and libnm-glib.
The main reason for the libnm-util/libnm-glib split is that the daemon
needs to link to libnm-util (to get NMSettings, NMConnection, etc),
but can't link to libnm-glib (because it uses many of the same type
names as the NetworkManager daemon. eg, NMDevice). So the daemon links
to only libnm-util, but basically all clients link to both.
With libnm, there will be only a single client-visible library, and
NetworkManager will internally link against a private "libnm-core"
containing the parts that used to be in libnm-util.
(The "libnm-core" parts still need to be in their own directory so
that the daemon can see those header files without also seeing the
ones in libnm/ that conflict with its own headers.)
[This commit just copies the source code from libnm-util/ to
libnm-core/, and libnm-glib/ to libnm/:
mkdir -p libnm-core/tests/
mkdir -p libnm/tests/
cp libnm-util/*.[ch] libnm-util/nm-version.h.in libnm-core/
rm -f libnm-core/nm-version.h libnm-core/nm-setting-template.[ch] libnm-core/nm-utils-enum-types.[ch]
cp libnm-util/tests/*.[ch] libnm-core/tests/
cp libnm-glib/*.[ch] libnm/
rm -f libnm/libnm_glib.[ch] libnm/libnm-glib-test.c libnm/nm-glib-enum-types.[ch]
cp libnm-glib/tests/*.[ch] libnm/tests/
]
