While technically it's already possible to implement a fail-over
mechanism using multiple connections (for example, defining a higher
priority DHCP connection with short DHCP timeout and a lower priority
one with static address), in practice this doesn't work well as we try
to autoactivate each connection 4 times before switching to the next
one.
Introduce a connection.autoconnect-retries property that can be used
to change the number of retries. The special value 0 means infinite
and can be used to try the connection forever. A -1 value means the
global configured default, which is equal to 4 unless overridden.
https://bugzilla.gnome.org/show_bug.cgi?id=763524
g_assert() uses G_LIKELY(), which in turn uses _G_BOOLEAN_EXPR().
As glib's version of _G_BOOLEAN_EXPR() uses a local variable
_g_boolean_var_, we cannot nest a G_LIKELY() inside a G_LIKELY(),
or inside a g_assert(), or a g_assert() inside a g_assert().
Workaround that, by redefining the macro.
I already encountered this problem before, when having a nm_assert()
inside a ({...}) block, inside a g_assert(). Then I just avoided that
combination, but this situation is quite easy to encounter.
Since we possibly already link against libjansson, we can also expose some
helper utils which allows nmcli to do basic validation of JSON without
requiring to duplicate the effort of using libjansson.
Also, tighten up the cecks to ensure that we have a JSON object at hand.
We are really interested in that and not of arrays or literals.
The core only consider the first address for shared connections, don't
pretend we accept multiple addresses. This change doesn't prevent
supporting multiple addresses in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=763937
Since commit 7d1709d7f6 ("device: check may_fail when progressing to
IP_CHECK") NM correctly checks the may-fail properties to decide
whether a connection must fail after the completion of IP
configuration. But for ipv4.method=disabled and ipv6.method=ignore the
IP configuration is always considered failed and thus setting
may-fail=no results in a connection that can never succeed.
To prevent such wrong configuration, force may-fail to TRUE for those
methods during connection normalization.
https://bugzilla.redhat.com/show_bug.cgi?id=1334884
For the per-connection settings "ethernet.cloned-mac-address"
and "wifi.cloned-mac-address", and for the per-device setting
"wifi.scan-rand-mac-address", we may generate MAC addresses using
either the "random" or "stable" algorithm.
Add new properties "generate-mac-address-mask" that allow to configure
which bits of the MAC address will be scrambled.
By default, the "random" and "stable" algorithms scamble all bits
of the MAC address, including the OUI part and generate a locally-
administered, unicast address.
By specifying a MAC address mask, we can now configure to perserve
parts of the current MAC address of the device. For example, setting
"FF:FF:FF:00:00:00" will preserve the first 3 octects of the current
MAC address.
One can also explicitly specify a MAC address to use instead of the
current MAC address. For example, "FF:FF:FF:00:00:00 68:F7:28:00:00:00"
sets the OUI part of the MAC address to "68:F7:28" while scrambling
the last 3 octects.
Similarly, "02:00:00:00:00:00 00:00:00:00:00:00" will scamble
all bits of the MAC address, except clearing the second-least
significant bit. Thus, creating a burned-in address, globally
administered.
One can also supply a list of MAC addresses like
"FF:FF:FF:00:00:00 68:F7:28:00:00:00 00:0C:29:00:00:00 ..." in which
case a MAC address is choosen randomly.
To fully scamble the MAC address one can configure
"02:00:00:00:00:00 00:00:00:00:00:00 02:00:00:00:00:00".
which also randomly creates either a locally or globally administered
address.
With this, the following macchanger options can be implemented:
`macchanger --random`
This is the default if no mask is configured.
-> ""
while is the same as:
-> "00:00:00:00:00:00"
-> "02:00:00:00:00:00 02:00:00:00:00:00"
`macchanger --random --bia`
-> "02:00:00:00:00:00 00:00:00:00:00:00"
`macchanger --ending`
This option cannot be fully implemented, because macchanger
uses the current MAC address but also implies --bia.
-> "FF:FF:FF:00:00:00"
This would yields the same result only if the current MAC address
is already a burned-in address too. Otherwise, it has not the same
effect as --ending.
-> "FF:FF:FF:00:00:00 <MAC_ADDR>"
Alternatively, instead of using the current MAC address,
spell the OUI part out. But again, that is not really the
same as macchanger does because you explictly have to name
the OUI part to use.
`machanger --another`
`machanger --another_any`
-> "FF:FF:FF:00:00:00 <MAC_ADDR> <MAC_ADDR> ..."
"$(printf "FF:FF:FF:00:00:00 %s\n" "$(sed -n 's/^\([0-9a-fA-F][0-9a-fA-F]\) \([0-9a-fA-F][0-9a-fA-F]\) \([0-9a-fA-F][0-9a-fA-F]\) .*/\1:\2:\3:00:00:00/p' /usr/share/macchanger/wireless.list | xargs)")"
Extend the "ethernet.cloned-mac-address" and "wifi.cloned-mac-address"
settings. Instead of specifying an explicit MAC address, the additional
special values "permanent", "preserve", "random", "random-bia", "stable" and
"stable-bia" are supported.
"permanent" means to use the permanent hardware address. Previously that
was the default if no explict cloned-mac-address was set. The default is
thus still "permanent", but it can be overwritten by global
configuration.
"preserve" means not to configure the MAC address when activating the
device. That was actually the default behavior before introducing MAC
address handling with commit 1b49f941a6.
"random" and "random-bia" use a randomized MAC address for each
connection. "stable" and "stable-bia" use a generated, stable
address based on some token. The "bia" suffix says to generate a
burned-in address. The stable method by default uses as token the
connection UUID, but the token can be explicitly choosen via
"stable:<TOKEN>" and "stable-bia:<TOKEN>".
On a D-Bus level, the "cloned-mac-address" is a bytestring and thus
cannot express the new forms. It is replaced by the new
"assigned-mac-address" field. For the GObject property, libnm's API,
nmcli, keyfile, etc. the old name "cloned-mac-address" is still used.
Deprecating the old field seems more complicated then just extending
the use of the existing "cloned-mac-address" field, although the name
doesn't match well with the extended meaning.
There is some overlap with the "wifi.mac-address-randomization" setting.
https://bugzilla.gnome.org/show_bug.cgi?id=705545https://bugzilla.gnome.org/show_bug.cgi?id=708820https://bugzilla.gnome.org/show_bug.cgi?id=758301
When comparing settings, nm_setting_compare() performs a complicated
logic, which basically serializes each GObject property to a GVariant
for the D-Bus representation.
That is wrong for example for ipv4.addresses, which don't contain
address labels. That is, the GObject property is called "addresses",
but the D-Bus field "addresses" cannot encode every information
and thus comparison fails. Instead, it would have to look into
"address-data".
Traditionally, we have virtual functions like compare_property() per
NMSetting to do the comparison. That comparison is based on the GObject
properties. I think that is wrong, because we should have a generic
concept of what a property is, independent from GObject properties.
With libnm, we added NMSettingProperty, which indeed is such an
GObject independent representation to define properties.
However, it is not used thoroughly, instead compare_property() is a hack
of special cases, overloads from NMSettingProperty, overloads of
compare_property(), and default behavior based on GParamSpec.
This should be cleaned up.
For now, just hack it by handle the properties with the problems
explicitly.
This new property be used as token to generate stable-ids instead
of the connection's UUID.
Later, this will be used by ipv6.addr-gen-mode=stable-privacy,
ethernet.cloned-mac-address=stable, and wifi.cloned-mac-address=stable
setting. Those generate stable addresses based on the connection's
UUID, but allow to use the stable-id instead.
This allows multiple connections to generate the same addresses
-- on the same machine, because in the above cases a machine
dependant key is also hashed.
The "shared" directory contains files that are possibly used by all components
of NetworkManager repository.
Some of these files are even copied as-is to other projects (VPN plugins, nm-applet)
and used there without modification. Move those files to a separate directory.
By moving them to a common directory, it is clearer that they belong
together. Also, you can easier compare the copied versions to their
original via
$ diff -r ./shared/nm-utils/ /path/to/nm-vpn-plugin/shared/nm-utils/
A failure to g_return*() by default prints a g_critical() with stringifing the
condition. Add a macro NMTST_G_RETURN_MSG() that reproduces that line to more
accurately match the failure message.
Having a gateway defined when never-default=yes causes troubles in
connection matching and anyway makes no sense.
If the combination is found, remove the gateway during the
normalization phase.
https://bugzilla.redhat.com/show_bug.cgi?id=1313091
No actual change, let's just not directly call nm_simple_connection_new_from_dbus().
Instead, add a wrapper to define in once place the flags we use for loading the
connection.
In some situations, we want strict checking of errors, for example when
NetworkManager receives a new connection from a client, the connection
must make sense as a whole (and since NetworkManager service is backward
compatible to the clients and not the other way around, there is no
excuse for sending invalid data to the server).
In other situations, we want a best-effort behavior. Like when
NetworkManager sends a connection to its clients, those clients
want to extract as many properties as they understand, but in order
to be forward compatible against newer server versions, invalid
or unknown properties must be accepted.
Previously, a mixture of both was done. Some issues caused a failure
to create a new NMSetting, other invalid parts were just silently
ignored or triggered a g_warning() in glib.
Now allow for both. When doing strict-validation, be more strict and
reject all unknown properties and catch when the user sets an invalid
argument. On the other hand, allow for a best-effort mode that
effectively cannot fail and will return a new NMSetting instance.
For now, add NMSettingParseFlags so that the caller can choose the
old behavior, strict parsing, or best effort.
This patch doesn't have any externally visible change except that
no more g_warnings will be emitted.
- All internal source files (except "examples", which are not internal)
should include "config.h" first. As also all internal source
files should include "nm-default.h", let "config.h" be included
by "nm-default.h" and include "nm-default.h" as first in every
source file.
We already wanted to include "nm-default.h" before other headers
because it might contains some fixes (like "nm-glib.h" compatibility)
that is required first.
- After including "nm-default.h", we optinally allow for including the
corresponding header file for the source file at hand. The idea
is to ensure that each header file is self contained.
- Don't include "config.h" or "nm-default.h" in any header file
(except "nm-sd-adapt.h"). Public headers anyway must not include
these headers, and internal headers are never included after
"nm-default.h", as of the first previous point.
- Include all internal headers with quotes instead of angle brackets.
In practice it doesn't matter, because in our public headers we must
include other headers with angle brackets. As we use our public
headers also to compile our interal source files, effectively the
result must be the same. Still do it for consistency.
- Except for <config.h> itself. Include it with angle brackets as suggested by
https://www.gnu.org/software/autoconf/manual/autoconf.html#Configuration-Headers
It is ugly that nmtst_assert_connection_verifies_after_normalization() would
normalize the argument and modify it. An assertion should not have side-effects.
The property is used to control duplicate address detection:
* -1 means default value
* 0 means no DAD is performed
* > 0 means timeout (in milliseconds) for arping responses
[bgalvani: moved setting from NMSettingIP4Config]
Add function nm_utils_enum_get_values() which returns a string array
containing the enum values. It can be used, for example, to build a
list of allowed values for user.
The property contains the fully qualified domain name to be sent to
DHCP server using the FQDN option. The property is mutually exclusive
with 'dhcp-hostname'.
These properties limit whether the connection applies to a certain WWAN modem
based on the modem's device ID or SIM ID (as reported by the WWAN management
service), or through the MCC/MNC ID of the operator that issued the SIM card.
make[5]: Entering directory './NetworkManager/libnm-core/tests'
CC test-general.o
test-general.c: In function ‘test_g_hash_table_get_keys_as_array’:
test-general.c:4552:69: error: ‘length’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
test-general.c:4543:8: note: ‘length’ was declared here
guint length;
^
Add the 'lldp' property to NMSettingConnection, which specifies
whether the reception and parsing of LLDP frames to discover neighbor
devices should be enabled.
This is intentionally IPv4 specific since this is used for a quick fallback to
method=link-local -- something that's not needed for IPv6 since the link local
address is always there.
https://bugzilla.redhat.com/show_bug.cgi?id=1262922
- accept a numeric value (decimal or hex (0x prefix))
- display a numeric value of the property in addition to the strings
- add/accept spaces between string names
to behave similar to other flags' properties.
All current users of NM_IN_SET() would rather use short-circuit evalation
(or don't care). It seems that doing it by default seems favorable.
The only downside is, that this might have somewhat unexpected behavior
to a user who expects a regular function (which would evaluate always
all arguments).
Fixes: 7860ef959a
When having a hash-of-hashes where each hash is indexed by a name,
(such as GKeyFile), you can either implement it as a hash-of-hashes
or define your own version of indexes that pack both levels of names
into one key.
This is an implementation of such a key. Use it as:
GHashTable *hash = g_hash_table_new_full (_nm_utils_strstrdictkey_hash,
_nm_utils_strstrdictkey_equal,
g_free, _destroy_value);
and create keys via:
NMUtilsStrStrDictKey *k = _nm_utils_strstrdictkey_create (s1, s2);
For lookup you can use static strings (note that the static string
might increase the size of the binary):
g_hash_table_contains (hash, _nm_utils_strstrdictkey_static ("outer", "inner"))
