NMVpnConnectionStateReason is no longer used and replaced by
NMActiveConnectionStateReason. However, the old enums should
stay in place as they were:
Otherwise:
#define NMVpnConnectionStateReason NMActiveConnectionStateReason
causes compiler warnings:
NMVpnConnectionStateReason x;
x = NM_VPN_CONNECTION_STATE_REASON_UNKNOWN; // -Wenum-conversion
if (x == NM_VPN_CONNECTION_STATE_REASON_NO_SECRETS) { } // -Wenum-compare
Similarly, a user who didn't upgrade shall continue to get the
old GType for NM_TYPE_VPN_CONNECTION_STATE_REASON.
In practice, old users will have no issues using the old enum
the places where it worked before.
The only use of the deprecated enum is in vpn_state_changed()
signal slot of NMVpnConnection. This makes the signal slot
itself deprecated. However, NMVpnConnection is an NMObject and commonly
created within libnm itself, not by the user. It is very unlikely that
a user of libnm subclassed NMVpnConnection and makes use of the
vpn_state_changed() signal slot. So, deprecate it without replacement.
Fixes: a91369f80d
This makes it easier to install the files with proper names.
Also, it makes the makefile rules slightly simpler.
Lastly, the documentation is now generated into docs/api, which makes it
possible to get rid of the awkward relative file names in docbook.
This speeds up the initial object tree load significantly. Also, it
reduces the object management complexity by shifting the duties to
GDBusObjectManager.
The lifetime of all NMObjects is now managed by the NMClient via the
object manager. The NMClient creates the NMObjects for GDBus objects,
triggers the initialization and serves as an object registry (replaces
the nm-cache).
The ObjectManager uses the o.fd.DBus.ObjectManager API to learn of the
object creation, removal and property changes. It takes care of the
property changes so that we don't have to and lets us always see a
consistent object state. Thus at the time we learn of a new object we
already know its properties.
The NMObject unfortunately can't be made synchronously initializable as
the NMRemoteConnection's settings are not managed with standard
o.fd.DBus Properties and ObjectManager APIs and thus are not known to
the ObjectManager. Thus most of the asynchronous object property
changing code in nm-object.c is preserved. The objects notify the
properties that reference them of their initialization in from their
init_finish() methods, thus the asynchronously created objects are not
allowed to fail creation (or the dependees would wait forever). Not a
problem -- if a connection can't get its Settings, it's either invisible
or being removed (presumably we'd learn of the removal from the object
manager soon).
The NMObjects can't be created by the object manager itself, since we
can't determine the resulting object type in proxy_type() yet (we can't
tell from the name and can't access the interface list). Therefore the
GDBusObject is coupled with a NMObject later on.
Lastly, now that all the objects are managed by the object manager, the
NMRemoteSettings and NMManager go away when the daemon is stopped. The
complexity of dealing with calls to NMClient that would require any of
the resources that these objects manage (connection or device lists,
etc.) had to be moved to NMClient. The bright side is that his allows
for removal all of the daemon presence tracking from NMObject.
On D-Bus level, string (s) or object paths (o) cannot be NULL.
Thus, whenver server exposes such an object, it gets automatically
coerced to "" or "/", respectively.
On client side, libnm should coerce certain properties back, for which
"" is just not a sensible value.
For example, an empty NM_DEVICE_ETHERNET_HW_ADDRESS should be instead
exposed as NULL.
Technically, this is an API change. However, all users were well advised
to expect both NULL and "" as possible return values and handle them
accordingly.
- All internal source files (except "examples", which are not internal)
should include "config.h" first. As also all internal source
files should include "nm-default.h", let "config.h" be included
by "nm-default.h" and include "nm-default.h" as first in every
source file.
We already wanted to include "nm-default.h" before other headers
because it might contains some fixes (like "nm-glib.h" compatibility)
that is required first.
- After including "nm-default.h", we optinally allow for including the
corresponding header file for the source file at hand. The idea
is to ensure that each header file is self contained.
- Don't include "config.h" or "nm-default.h" in any header file
(except "nm-sd-adapt.h"). Public headers anyway must not include
these headers, and internal headers are never included after
"nm-default.h", as of the first previous point.
- Include all internal headers with quotes instead of angle brackets.
In practice it doesn't matter, because in our public headers we must
include other headers with angle brackets. As we use our public
headers also to compile our interal source files, effectively the
result must be the same. Still do it for consistency.
- Except for <config.h> itself. Include it with angle brackets as suggested by
https://www.gnu.org/software/autoconf/manual/autoconf.html#Configuration-Headers
config.h should be included from every .c file, and it should be
included before any other include. Fix that.
(As a side effect of how I did this, this also changes us to
consistently use "config.h" rather than <config.h>. To the extent that
it matters [which is not much], quotes are more correct anyway, since
we're talking about a file in our own build tree, not a system
include.)
Make enum- and flags-valued properties use GParamSpecEnum and
GParamSpecFlags, for better introspectability/bindability.
This requires no changes outside libnm-core/libnm since the expected
data size is still the same with g_object_get()/g_object_set(), and
GLib will internally convert between int/uint and enum/flags GValues
when using g_object_get_property()/g_object_set_property().
Port libnm-core/libnm to GDBus.
The NetworkManager daemon continues to use dbus-glib; the
previously-added connection hash/variant conversion methods are now
moved to NetworkManagerUtils (along with a few other utilities that
are now only needed by the daemon code).
Add _nm_object_class_add_interface(), for declaring that a class
implements a particular interface, and then have NMObject create the
corresponding proxies itself. (The subclass can get a copy with
_nm_object_get_proxy() if it needs it for something).
(In GDBus, creating a proxy is a heavier operation than in dbus-glib,
so we'll need to create the proxies asynchronously. Moving the
creation to NMObject makes that easier since we can do it as part
of the existing init/init_async.)
"NetworkManager.h"'s name (and non-standard capitalization) suggest
that it's some sort of high-level super-important header, but it's
really just low-level D-Bus stuff. Rename it to "nm-dbus-interface.h"
and likewise "NetworkManagerVPN.h" to "nm-vpn-dbus-interface.h"
Remove _nm_object_ensure_inited(), etc; objects that implement
GInitable are now mandatory-to-init().
Remove constructor() implementations that sometimes return NULL; do
all the relevant checking in init() instead.
Make nm_client_new() and nm_remote_settings_new() take a GCancellable
and a GError**.
Rather than having each object type override constructed() to call
_nm_object_register_properties(), have NMObject call a virtual method
on the subclass to ask it to register them.
Move some code around in nm-client.c and nm-object.c so that all
D-Bus-related initialization happens in init_dbus(), and
non-D-Bus-related stuff stays in construct().
(This simplifies the next commit.)
GLib/Gtk have mostly settled on the convention that two-letter
acronyms in type names remain all-caps (eg, "IO"), but longer acronyms
become initial-caps-only (eg, "Tcp").
NM was inconsistent, with most long acronyms using initial caps only
(Adsl, Cdma, Dcb, Gsm, Olpc, Vlan), but others using all caps (DHCP,
PPP, PPPOE, VPN). Fix libnm and src/ to use initial-caps only for all
three-or-more-letter-long acronyms (and update nmcli and nmtui for the
libnm changes).
This commit begins creating the new "libnm", which will replace
libnm-util and libnm-glib.
The main reason for the libnm-util/libnm-glib split is that the daemon
needs to link to libnm-util (to get NMSettings, NMConnection, etc),
but can't link to libnm-glib (because it uses many of the same type
names as the NetworkManager daemon. eg, NMDevice). So the daemon links
to only libnm-util, but basically all clients link to both.
With libnm, there will be only a single client-visible library, and
NetworkManager will internally link against a private "libnm-core"
containing the parts that used to be in libnm-util.
(The "libnm-core" parts still need to be in their own directory so
that the daemon can see those header files without also seeing the
ones in libnm/ that conflict with its own headers.)
[This commit just copies the source code from libnm-util/ to
libnm-core/, and libnm-glib/ to libnm/:
mkdir -p libnm-core/tests/
mkdir -p libnm/tests/
cp libnm-util/*.[ch] libnm-util/nm-version.h.in libnm-core/
rm -f libnm-core/nm-version.h libnm-core/nm-setting-template.[ch] libnm-core/nm-utils-enum-types.[ch]
cp libnm-util/tests/*.[ch] libnm-core/tests/
cp libnm-glib/*.[ch] libnm/
rm -f libnm/libnm_glib.[ch] libnm/libnm-glib-test.c libnm/nm-glib-enum-types.[ch]
cp libnm-glib/tests/*.[ch] libnm/tests/
]
