The new ModemManager comes with its own headers, and defines its own symbols to
name e.g. each interface. In order not to collide with the new ones, rename the
existing ones with a 'MM_OLD_DBUS' prefix instead of just 'MM_DBUS'.
The new switch will run in 'auto' mode when not explicitly specified. In this
case the new ModemManager1 support will only be available if it finds libmm-glib
through pkg-config.
Other than the 'auto' mode, 'yes' and 'no' are allowed in order to specify
explicit requirements.
Previously, when a new bond or VLAN connection was created, NM would
always create the virtual device right away. But on startup, it only
creates virtual devices for connections that can autoconnect. Fix
connection_added() to make that check as well.
The Gentoo initscript is being patched downstream anyway. It
will be easier to maintain it in just one place.
See discussion at bugs.gentoo.org:
https://bugs.gentoo.org/show_bug.cgi?id=441754
This patch makes DHCPv6 support more or less equivalent to that
one of IPv4 DHCP.
(dcbw: fix some formatting, rearrange code so it's less convoluted,
fix up writing hostname to ifcfg files)
For NetworkManager, dhclient is a runtime dependency. Distribution dhclient
configuration is either put directly into /etc or in /etc/dhcp. It is much
safer to check this at runtime than to guess the location from distribution
name.
Additionally, the distribution dhclient configuration files can be overriden
by a configuration file in /etc/NetworkManager.
TODO: Functions get_dhclient_config() and merge_dhclient_config() should
be also used for IPv6.
DHCP lease file names are built by NetworkManager and contain connection UUID
which makes them NM-specific. Their new location belongs to NetworkManager and
doesn't have to be guessed. With no guessing, we don't need distribution-specific
conditionals.
Note: This change may require modifications to the selinux policy. But after all
these files actually belong to NetworkManager as well as the instance of dhclient
that uses them.
Use --enable-doc and --enable-tests instead of --with-docs and
--with-tests. This is consistent with other features and with
--enable-gtk-doc option. Support current variants as fallback.
Don't build tests unless --enable-tests is specified.
Shorter forms work as previously. Thus, all of these commands are valid:
nmcli device, nmcli devic, nmcli devi, nmcli dev, nmcli de, nmcli d
nmcli connection, nmcli connectio, ..., nmcli conn, nmcli con, ..., nmcli c
You can now use 'address=' even for IPv6 and it's the encouraged way
to set up a single address manually. For multiple addresses,
'address0=', 'address1=', etc, should be preferred.
Example:
address=10.0.0.15/24/10.0.0.1
address0=192.168.0.1/24
address1=10.0.0.16/32
Example (backward compatibility):
addresses=10.0.0.15/24/10.0.0.1
addresses0=192.168.0.1/24
addresses1=10.0.0.16/32
IPv4 and IPv6 address configuration is now handled together and supports
the following syntax (slashes can be replaced with semicolons):
address/plen
address/plen,gateway
IPv4 and IPv6 route configuration is also handled uniformly and supports
the following syntax:
address/plen (for device routes)
address/plen,gateway (for gateway routes)
address/plen,gateway,metric (for gateway routes with metric)
For compatibility reasons, slash (/), comma (,) and semicolon (;) are
considered equal by the parser. The /plen part is optional for both
addresses and routes for compatibility reasons.
Leaving out the prefix length is not considered a good idea. IPv6
addresses default to 64 and IPv4 now defaults to 24 which is the closest
possible IPv4 counterpart. Routes default to single addresses.
Example 1:
[ipv4]
method=manual
addresses1=192.168.56.5/24,192.168.56.1
addresses2=192.168.57.5/24
routes1=4.5.6.0/24
routes2=1.2.3.0/24,4.5.6.7
routes3=7.8.9.0/24,4.5.6.7,99
[ipv6]
method=manual
addresses1=2001:db8:a🅱️:3/64,2001:db8:a🅱️:1
addresses2=2001:db8:c:d::3/64
routes1=2001:db8:e:f::/64,2001:db8:a🅱️:4
Example 2 (equivalent):
[ipv4]
method=manual
addresses1=192.168.56.5;24;192.168.56.1
addresses2=192.168.57.5;24
routes1=4.5.6.0;24
routes2=1.2.3.0;24;4.5.6.7
routes3=7.8.9.0;24;4.5.6.7;99
[ipv6]
method=manual
addresses1=2001:db8:a🅱️:3;64;2001:db8:a🅱️:1
addresses2=2001:db8:c:d::3;64
routes1=2001:db8:e:f::;64;2001:db8:a🅱️:4
For writing, I have arbitrarily chosen one of the formats 'reader'
can parse. Address and prefix length are separated by slash (/),
everything else is separated by comma (,).
addresses1=address/plen,gateway
routes1=address/plen,gateway,metric
Note: The modified 'reader' exposes a bug in the 'writer' and ignores
out badly-formatted routes. This problem is also fixed by this
commit. Keyfile tests now pass.
This reverts commit 2ad6dcf215.
org.freedesktop.NetworkManager.PPP is a private interface between
NM and nm-ppp-plugin and we don't want it in the documentation.
New option --with-suspend-resume=[upower|systemd] which defaults
to systemd if you have systemd >= 183 with the inhibit support,
otherwise upower. Allows you to use systemd session tracking
simultaneously with upower for suspend/resume if you don't have
system >= 183.
It is emitted in nm_settings_connection_remove() called by plugins when the
connection was removed.
This prevents the signal from appearing twice on D-Bus.
Signed-off-by: Jiří Klimeš <jklimes@redhat.com>
Use autoconf/automake variables for NetworkManager paths. Use
NetworkManager subdirectory where appropriate.
Files in /var/run (or /run on some distros) are moved into a separate
directory as is usual with other daemons. It makes the filesystem
more readable and file prefixing unnecessary.
/var/run/NetworkManager.pid -> /var/run/NetworkManager/NetworkManager.pid
/var/run/nm-dns-dnsmasq.pid -> /var/run/NetworkManager/dnsmasq.pid
/var/run/nm-dns-dnsmasq.conf -> /var/run/NetworkManager/dnsmasq.conf
The /var/run/NetworkManager directory is created at runtime, if it doesn't
exist.
Note: Path-based security policies like SELinux and AppArmor may need to
be adapted.
When determining the system hostname, /etc/hostname should override
/etc/sysconfig/network, so monitor both files.
When setting the hostname, set it in /etc/hostname, and delete the
/etc/sysconfig/network HOSTNAME entry if present.
https://bugzilla.redhat.com/show_bug.cgi?id=831735
