We commonly only allow tabs at the beginning of a line, not
afterwards. The reason for this style is so that the code
looks formated right with tabstop=4 and tabstop=8.
It already defaults to the right value. We only need to define
NM_VERSION_MIN_REQUIRED, so that parts of our internal build
can make use of deprecated API.
We don't need to have two version defines "CUR" and "NEXT".
The main purpose of these macros (if not their only), is to
make NM_AVAILABLE_IN_* and NM_DEPRECATED_IN_* macros work.
1) At the precise commit of a release, "CUR" and "NEXT" must be identical,
because whenever the user configures NM_VERSION_MIN_REQUIRED and
NM_VERSION_MAX_ALLOWED, then they both compare against the current
version, at which point "CUR" == "NEXT".
2) Every other commit aside the release, is a development version that leads
up the the next coming release. But as far as versioning is concerned, such
a development version should be treated like that future release. It's unstable
API and it may or may not be close to later API of the release. But
we shall treat it as that version. Hence, also in this case, we want to
set both "NM_VERSION_CUR_STABLE" and again NEXT to the future version.
This makes NM_VERSION_NEXT_STABLE redundant.
Previously, the separation between current and next version would for
example allow that NM_VERSION_CUR_STABLE is the previously release
stable API, and NM_VERSION_NEXT_STABLE is the version of the next upcoming
stable API. So, we could allow "examples" to make use of development
API, but other(?) internal code still restrict to unstable API. But it's
unclear which other code would want to avoid current development.
Also, the points 1) and 2) were badly understood. Note that for our
previousy releases, we usually didn't bump the macros at the stable
release (and if we did, we didn't set them to be the same). While using
two macros might be more powerful, it is hard to grok and easy to
forget to bump the macros a the right time. One macro shall suffice.
All this also means, that *immediately* after making a new release, we shall
bump the version number in `configure.ac` and "NM_VERSION_CUR_STABLE".
The strings holding the names used for libraries have also been
moved to different variables. This way they would be less error
as these variables can be reused easily and any typing error
would be quickly detected.
Although it is possible to generate distributable files on meson
since version 0.41 by using the `ninja dist` command, autotools does
different things that end up creating a different distributable
file.
meson build files have been added to autotools build files as
distributable files, so the whole meson port would also be
distributed.
https://mail.gnome.org/archives/networkmanager-list/2018-January/msg00047.html
In practice, this should only matter when there are multiple
header files with the same name. That is something we try
to avoid already, by giving headers a distinct name.
When building NetworkManager itself, we clearly want to use
double-quotes for including our own headers.
But we also want to do that in our public headers. For example:
./a.c
#include <stdio.h>
#include <nm-1.h>
void main() {
printf ("INCLUDED %s/nm-2.h\n", SYMB);
}
./1/nm-1.h
#include <nm-2.h>
./1/nm-2.h
#define SYMB "1"
./2/nm-2.h
#define SYMB "2"
$ cc -I./2 -I./1 ./a.c
$ ./a.out
INCLUDED 2/nm-2.h
Exceptions to this are
- headers in "shared/nm-utils" that include <NetworkManager.h>. These
headers are copied into projects and hence used like headers owned by
those projects.
- examples/C
For internal compilation we want to be able to use deprecated
API without warnings.
Define the version min/max macros to effectively disable deprecation
warnings.
However, don't do it via CFLAGS option in the makefiles, instead hack it
to "nm-default.h". After all, *every* source file that is for internal
compilation needs to include this header as first.
Up to now, the "include" directory contained (only) header files that were
used project-wide by libs, core, clients, et al.
Since the directory now also contains a non-header file, the "include"
name is misleading. Instead of adding yet another directory that is
project-wide, with non-header-only content, rename the "include"
directory to "shared".
For libnm library, "nm-dbus-interface.h" contains defines like the D-Bus
paths of NetworkManager. It is desirable to have this header usable without
having a dependency on "glib.h", for example for a QT application. For that,
commit c0852964a8 removed that dependancy.
For libnm-glib library, the analog to "nm-dbus-interface.h" is
"NetworkManager.h", and the same applies there. Commit
159e827a72 removed that include.
However, that broke build on PackageKit [1] which expected to get the
version macros by including "NetworkManager.h". So at least for libnm-glib,
we need to preserve old behavior so that a user including
"NetworkManager.h" gets the version macros, but not "glib.h".
Extract the version macros to a new header file "nm-version-macros.h".
This header doesn't include "glib.h" and can be included from
"NetworkManager.h". This gives as previous behavior and a glib-free
include.
For libnm we still don't include "nm-version-macros.h" to "nm-dbus-interface.h".
Very few users will actually need the version macros, but not using
libnm.
Users that use libnm, should just include (libnm's) "NetworkManager.h" to
get all headers.
As a special case, a user who doesn't want to use glib/libnm, but still
needs both "nm-dbus-interface.h" and "nm-version-macros.h", can include
them both separately.
[1] https://github.com/hughsie/PackageKit/issues/85
Fixes: 4545a7fe96
Even Fedora is no longer shipping the WiMAX SDK, so it's likely we'll
eventually accidentally break some of the code in src/devices/wimax/
(if we haven't already). Discussion on the list showed a consensus for
dropping support for WiMAX.
So, remove the SDK checks from configure.ac, remove the WiMAX device
plugin and associated manager support, and deprecate all the APIs.
For compatibility reasons, it is still possible to create and save
WiMAX connections, to toggle the software WiMAX rfkill state, and to
change the "WIMAX" log level, although none of these have any effect,
since no NMDeviceWimax will ever be created.
nmcli was only compiling in support for most WiMAX operations when NM
as a whole was built with WiMAX support, so that code has been removed
now as well. (It is still possible to use nmcli to create and edit
WiMAX connections, but those connections will never be activatable.)
nm-dbus-helpers-private.h is a private header file to libnm-glib/.
nm-settings-connection-glue.h and nm-settings-glue.h are not part
of libnm-glib/, they are inside src/.
Signed-off-by: Thomas Haller <thaller@redhat.com>
NetworkManager.h, NetworkManagerVPN.h, and nm-version.h are part of
the libnm-util API, so move them to libnm-util.
include/ still contains headers that are strictly NM-internal (eg,
nm-glib-compat.h).
Add versioned NM_DEPRECATED_IN_* and NM_AVAILABLE_IN_* macros, and tag
new/deprecated functions accordingly. (All currently-deprecated
functions are assumed to have been deprecated in 0.9.10.)
Add NM_VERSION_MIN_REQUIRED and NM_VERSION_MAX_ALLOWED macros which
can be set to determine which versions will cause warnings.
With the current settings, external consumers of the
libnm-util/libnm-glib APIs will have MIN_REQUIRED and MAX_ALLOWED both
set to NM_VERSION_0_9_8 by default, meaning they will get warnings
about functions added in 0.9.10. NM internally sets
NM_VERSION_MAX_ALLOWED to NM_VERSION_NEXT_STABLE to ensure that it is
always allowed to use all APIs.
These days more and more devices are showing up that support a
number of different access technology families in the same hardware,
like Qualcomm Gobi (CDMA and GSM), Pantech UM190 (CDMA and GSM),
Pantech UML290 (CDMA and LTE), LG VL600 (CDMA and LTE), Sierra
320U (GSM and LTE), etc. The previous scheme of having device
classes based on access technology family simply cannot handle
this hardware and attempting to add LTE to both the CDMA and GSM
device classes would result in a bunch of code duplication that
we don't want. There's a better way...
Instead, combine both CDMA and GSM device classes into a generic
"Modem" device class that provides capabilities indicating what
access technology families a modem supports, and what families
it supports immediately without a firmware reload. (Gobi devices
for example require a firmware reload before they can switch
between GSM and CDMA). This provides the necessary flexibility
to the client and allows us to keep the API stable when the
same consolidation change is made in ModemManager.
The current code doesn't yet allow multi-mode operation internally,
but the API is now what we want it to be and won't need to be
changed.
NMSettingsConnectionInterface was created to allow the daemon and NM
clients to have common code that handled both system and user
connections. It's no longer needed now that user settings services are
gone.
This concludes the flattening of libnm-glib.
