- Don't use @parent_class name. This local variable (and @object_class) is
the class instance up-cast to the pointer types of the parents. The point
here is not that it is the direct parent. The point is, that it's the
NMSettingClass type.
Also, it can only be used inconsistently, in face of NMSettingIP4Config,
who's parent type is NMSettingIPConfig. Clearly, inside
nm-setting-ip4-config.c we wouldn't want to use the "parent_class"
name. Consistently rename @parent_class to @setting_class.
- Also rename the pointer to the own class to @klass. "setting_class" is also the
wrong name for that, because the right name would be something like
"setting_6lowpan_class".
However, "klass" is preferred over the latter, because we commonly create new
GObject implementations by copying an existing one. Generic names like "klass"
and "self" inside a type implementation make that simpler.
- drop useless comments like
/* virtual functions */
/* Properties */
It's better to logically and visually structure the code, and avoid trival
remarks about that. They only end up being used inconsistently. If you
even need a stronger visual separator, then an 80 char /****/ line
should be preferred.
- All internal source files (except "examples", which are not internal)
should include "config.h" first. As also all internal source
files should include "nm-default.h", let "config.h" be included
by "nm-default.h" and include "nm-default.h" as first in every
source file.
We already wanted to include "nm-default.h" before other headers
because it might contains some fixes (like "nm-glib.h" compatibility)
that is required first.
- After including "nm-default.h", we optinally allow for including the
corresponding header file for the source file at hand. The idea
is to ensure that each header file is self contained.
- Don't include "config.h" or "nm-default.h" in any header file
(except "nm-sd-adapt.h"). Public headers anyway must not include
these headers, and internal headers are never included after
"nm-default.h", as of the first previous point.
- Include all internal headers with quotes instead of angle brackets.
In practice it doesn't matter, because in our public headers we must
include other headers with angle brackets. As we use our public
headers also to compile our interal source files, effectively the
result must be the same. Still do it for consistency.
- Except for <config.h> itself. Include it with angle brackets as suggested by
https://www.gnu.org/software/autoconf/manual/autoconf.html#Configuration-Headers
The localization headers are now included via "nm-default.h".
Also fixes several places, where we wrongly included <glib/gi18n-lib.h>
instead of <glib/gi18n.h>. For example under "clients/" directory.
Move the settings/plugins doc generation from libnm-util to
libnm-core, since libnm-util isn't being updated for all new
properties.
With this commit, the keyfile and ifcfg-rh documentation is basically
unchanged, except that deprecated properties are now gone, and new
properties have been added, and the sections are in a different order.
(generate-plugin-docs.pl just outputs the settings in Makefile order,
and they were unsorted in libnm-util, but are sorted in libnm-core).
The settings documentation used for nm-settings.5, the D-Bus API docs,
and the nmcli help is changed a bit more at this point, and mostly for
the worse, since the libnm-core setting properties don't match up with
the D-Bus API as well as the libnm-util ones do. To be fixed...
(I also removed the "plugins docs" line in each plugin docs comment
block while moving them, since those blocks will be used for more than
just plugins soon, and it's sort of obvious anyway.)
Libraries need to include <gi18n-lib.h>, not <gi18n.h>, so that _()
will get defined to "dgettext (GETTEXT_DOMAIN, string)" rather than
"gettext (string)" (which will use the program's default domain, which
works fine for programs in the NetworkManager tree, but not for
external users). Likewise, we need to call bindtextdomain() so that
gettext can find the translations if the library is installed in a
different prefix from the program using it (and
bind_textdomain_codeset(), so it will know the translations are in
UTF-8 even if the locale isn't).
(The fact that no one noticed this was broken before is because the
libraries didn't really start returning useful translated strings much
until 0.9.10, and none of the out-of-tree clients have been updated to
actually show those strings to users yet.)
config.h should be included from every .c file, and it should be
included before any other include. Fix that.
(As a side effect of how I did this, this also changes us to
consistently use "config.h" rather than <config.h>. To the extent that
it matters [which is not much], quotes are more correct anyway, since
we're talking about a file in our own build tree, not a system
include.)
- Remove list of authors from files that had them; these serve no
purpose except to quickly get out of date (and were only used in
libnm-util and not libnm-glib anyway).
- Just say "Copyright", not "(C) Copyright" or "Copyright (C)"
- Put copyright statement after the license, not before
- Remove "NetworkManager - Network link manager" from the few files
that contained it, and "libnm_glib -- Access network status &
information from glib applications" from the many files that
contained it.
- Remove vim modeline from nm-device-olpc-mesh.[ch], add emacs modeline
to files that were missing it.
This is the same behaviour as nm_utils_normalize_connection(),
which will soon be removed in favor of nm_connection_normalize().
This takes care, that normal connections always have an IP4 and IP6 setting,
and that slave connections never have it.
Signed-off-by: Thomas Haller <thaller@redhat.com>
- Before, when setting the slave-type to an invalid type, the setting
was silently accepted. Now verification fails with "Unknown slave type '%s'"
- Before, the @master property was not checked. So you could have a @slave-type,
without having @master set. And similarly, you could have @master, but
no @slave-type. Fix both issues.
Signed-off-by: Thomas Haller <thaller@redhat.com>
Some type-specific NMSetting implementations (bond, bridge, team, vlan)
have their own 'interface-name' property. This property will be
deprecated in favour of 'interface-name' in NMSettingConnection.
Change verify() and normalize() to check that the redundant
values match and repair/normalize the properties.
Force the virtual interface name of the type-specific setting to be
equal to NMSettingConnection:interface_name. This way, the depreacted
field stays valid and backward compatible.
NMSettingInfiniband is special, because it does not have a backing
property for the interface name, although it implements
get_virtual_iface_name(). To account for this, some special handling
is needed in order not to change the behaviour of get_virtual_iface_name().
Signed-off-by: Thomas Haller <thaller@redhat.com>
Remove all the GParamSpec docs, since everything now uses the gtk-doc
docs instead, so there's no point in having two copies of each (which
are often out of sync anyway).
Since we're touching so many lines anyway, also fix up the indentation
of the remaining property-installing lines, and add
G_PARAM_STATIC_STRINGS to each paramspec (so the nick strings don't
get strduped). Also, be consistent about starting a new line between
"g_object_class_install_property" and its opening parenthesis.
Fix up various issues with the docs for the NMSetting properties, and
pull in text from the GParamSpec docs where the GParamSpec docs were
better (or contained information that is necessary in the context of
nm-settings.5).
Also, consistently wrap all of the doc comments to the same width (80
columns).
Fix misused gtk-doc annotations and incorrectly-identified properties.
In particular, the upcoming introspection-based generate-settings-spec
expands macro and enum values, so if you use '%' where you should have
used '#', it will fail to find an expansion, and error out.
We made the UIs consistent last year, but missed the documentation.
Fix the docs to also consistently use "Wi-Fi" rather than "WiFi",
"Wifi", "wifi", or "WiFI"; "Ethernet" rather than "ethernet"; and
"InfiniBand" rather than "Infiniband".
- refactor register_settings to allow lookup by GType and
add the settings name to SettingInfo.
- setting NM_SETTING_NAME is deprecated and should not be set anymore.
Indeed it has always be a bug, to reset the name to a different value.
The only valid place to set the name was in the _init() function of
the derived class itself.
This is now no longer needed/possible. Instead the name get's
detected based on the registered setting types. This makes use of
the registered metadata that is available anyway since every
usable setting has to register itself.
Signed-off-by: Thomas Haller <thaller@redhat.com>
INFERRABLE means the opposite of CANDIDATE; a property which NetworkManager
can read ("infer") from the system or the kernel when generating
connections. CANDIDATE isn't a great name and thus dies.
NMSettingConnection was making sure that bond slaves didn't have an IP
configuration, but it should have been making that check for bridge
and team slaves too.
Several settings types' verify() functions need to find a particular
setting from the all_settings list that NMConnection passes them. Add
a convenience function for this.
To better handle broken hardware, like switches which don't pass
traffic for a few seconds after a carrier has been negotiated,
add a timeout to control how long to wait for successful pings
of the gateway before giving up and proceeding with IP config.
Default is 0, which means don't ping the gateway, just assume
the NIC/switch aren't lying and can pass traffic immediately.
Make setting type registration less icky; instead of having the
connection register all the settings, have the settings themselves
register that information at library load time. Putting this sort
of thing in G_DEFINE_TYPE_WITH_CODE is apparently more standard
than the home-rolled stuff we had before. Also document the
priority stuff so when adding new settings, people know what
priority to use.
(cleanups by jklimes)
Rather than generating enum classes by hand (and complaining in each
file that "this should really be standard"), use glib-mkenums.
Unfortunately, we need a very new version of glib-mkenums in order to
deal with NM's naming conventions and to fix a few other bugs, so just
import that into the source tree temporarily.
Also, to simplify the use of glib-mkenums, import Makefile.glib from
https://bugzilla.gnome.org/654395.
To avoid having to run glib-mkenums for every subdirectory of src/,
add a new "generated" directory, and put the generated enums files
there.
Finally, use Makefile.glib for marshallers too, and generate separate
ones for libnm-glib and NetworkManager.
Adds a MASTER= directive to ifcfg-rh allowing a connection to define
itself as bonding slave.
Adds a connection property "master" which contains the in-kernel device
name or UUID of the master connection.
Adds a connection property "slave-type" which defines the type of slave
this connection represents. Currently this is only set by bonding but
eventually this will be used by VLAN and bridging.
Enforces that no bonding slave connection has any IPv4 or IPv6
configuration set.
Changes make_ip4_setting() to take a universal flag indicating whether
to allow disabling ip4 config or not and use it for both, ip6 and
bonding special case.
Signed-off-by: Thomas Graf <tgraf@redhat.com>
