1) the command line gets shorter. I frequently run `make V=1` to see
the command line arguments for the compiler, and there is a lot
of noise.
2) define each of these variables at one place. This makes it easy
to verify that for all compilation units, a particular
define has the same value. Previously that was not obvious or
even not the case (see commit e5d1a71396
and commit d63cf1ef2f).
The point is to avoid redundancy.
3) not all compilation units need all defines. In fact, most modules
would only need a few of these defines. We aimed to pass the necessary
minium of defines to each compilation unit, but that was non-obvious
to get right and often we set a define that wasn't used. See for example
"src_settings_plugins_ibft_cppflags" which needlessly had "-DSYSCONFDIR".
This question is now entirely avoided by just defining all variables in
a header. We don't care to find the minimum, because every component
gets anyway all defines from the header.
4) this also avoids the situation, where a module that previously did
not use a particular define gets modified to require it. Previously,
that would have required to identify the missing define, and add
it to the CFLAGS of the complation unit. Since every compilation
now includes "config-extra.h", all defines are available everywhere.
5) the fact that each define is now available in all compilation units
could be perceived as a downside. But it isn't, because these defines
should have a unique name and one specific value. Defining the same
name with different values, or refer to the same value by different
names is a bug, not a desirable feature. Since these defines should
be unique accross the entire tree, there is no problem in providing
them to every compilation unit.
6) the reason why we generate "config-extra.h" this way, instead of using
AC_DEFINE() in configure.ac, is due to the particular handling of
autoconf for directory variables. See [1].
With meson, it would be trivial to put them into "config.h.meson".
While that is not easy with autoconf, the "config-extra.h" workaround
seems still preferable to me.
[1] https://www.gnu.org/software/autoconf/manual/autoconf-2.63/html_node/Installation-Directory-Variables.html
Use two common defines NM_BUILD_SRCDIR and NM_BUILD_BUILDDIR
for specifying the location of srcdir and builddir.
Note that this is only relevant for tests, as they expect
a certain layout of the directories, to find files that concern
them.
There are multiple tests with the same in different directories; add a
unique prefix to test names so that it is clear from the output which
one is running.
Some targets are missing dependencies on some generated sources in
the meson port. These makes the build to fail due to missing source
files on a highly parallelized build.
These dependencies have been resolved by taking advantage of meson's
internal dependencies which can be used to pass source files,
include directories, libraries and compiler flags.
One of such internal dependencies called `core_dep` was already in
use. However, in order to avoid any confusion with another new
internal dependency called `nm_core_dep`, which is used to include
directories and source files from the `libnm-core` directory, the
`core_dep` dependency has been renamed to `nm_dep`.
These changes have allowed minimizing the build details which are
inherited by using those dependencies. The parallelized build has
also been improved.
Tests are commonly created via copy&paste. Hence, it's
better to express a certain concept explicitly via a function
or macro. This way, the implementation of the concept can be
adjusted at one place, without requiring to change all the callers.
Also, the macro is shorter, and brevity is better for tests
so it's easier to understand what the test does. Without being
bothered by noise from the redundant information.
Also, the macro knows better which message to expect. For example,
messages inside "src" are prepended by nm-logging.c with a level
and a timestamp. The expect macro is aware of that and tests for it
#define NMTST_EXPECT_NM_ERROR(msg) NMTST_EXPECT_NM (G_LOG_LEVEL_MESSAGE, "*<error> [*] "msg)
This again allows the caller to ignore this prefix, but still assert
more strictly.
Note that:
- we compile some source files multiple times. Most notably those
under "shared/".
- we include a default header "shared/nm-default.h" in every source
file. This header is supposed to setup a common environment by defining
and including parts that are commonly used. As we always include the
same header, the header must behave differently depending
one whether the compilation is for libnm-core, NetworkManager or
libnm-glib. E.g. it must include <glib/gi18n.h> or <glib/gi18n-lib.h>
depending on whether we compile a library or an application.
For that, the source files need the NETWORKMANAGER_COMPILATION #define
to behave accordingly.
Extend the define to be composed of flags. These flags are all named
NM_NETWORKMANAGER_COMPILATION_WITH_*, they indicate which part of the
build are available. E.g. when building libnm-core.la itself, then
WITH_LIBNM_CORE, WITH_LIBNM_CORE_INTERNAL, and WITH_LIBNM_CORE_PRIVATE
are available. When building NetworkManager, WITH_LIBNM_CORE_PRIVATE
is not available but the internal parts are still accessible. When
building nmcli, only WITH_LIBNM_CORE (the public part) is available.
This granularily controls the build.
Source files for enum types are generated by passing segments of the
source code of the files to the `glib-mkenums` command.
This patch removes those parameters where source code is used from
meson build files by moving those segmeents to template files.
https://mail.gnome.org/archives/networkmanager-list/2017-December/msg00057.html
There are some tests located in different directories which are
using the same name. To avoid any confussion a prefix was used to
name the test and the target.
This patch uses the prefix just for the target, to avoid any
collision that may happen, and uses the `test-` pattern as the
name.
https://mail.gnome.org/archives/networkmanager-list/2017-December/msg00051.html
The `libnm_linking` test that belongs to the libnm-util's general
tests is failing because the test is not able to find the
`test-libnm-linking` binary, which is executed as a child process.
The problem lies to the `BUILD_DIR` macro definition which is
used to set the place to find the binary, and is wrongly defined
with the source directory.
This patch changes its value to the build directory that fixes
the problem.
https://mail.gnome.org/archives/networkmanager-list/2017-December/msg00049.html
crypto_verify_private_key_data() must try to decrypt the key only when
a password is supplied.
Previously the decrypt test always passed because we detected an
unsupported cipher and faked success. Now since version 3.5.4 gnutls
supports PBES1-DES-CBC-MD5 and the key is actually decrypted when a
password is supplied.
Also, don't assert that a wrong password works because we're now able
to actually verify it (only with recent gnutls).
https://bugzilla.gnome.org/show_bug.cgi?id=771623
The "shared" directory contains files that are possibly used by all components
of NetworkManager repository.
Some of these files are even copied as-is to other projects (VPN plugins, nm-applet)
and used there without modification. Move those files to a separate directory.
By moving them to a common directory, it is clearer that they belong
together. Also, you can easier compare the copied versions to their
original via
$ diff -r ./shared/nm-utils/ /path/to/nm-vpn-plugin/shared/nm-utils/
A failure to g_return*() by default prints a g_critical() with stringifing the
condition. Add a macro NMTST_G_RETURN_MSG() that reproduces that line to more
accurately match the failure message.
The linking test causes a crash to check whether libnm and libnm-util
are both linked. If abrt or systemd-coredump are enabled, the core
dump processing will take a long time when the address sanitizer is
enabled, due to the huge process address space. It seems a good choice
to disable the test when NM was compiled with -fsanitize=address.
For internal compilation we want to be able to use deprecated
API without warnings.
Define the version min/max macros to effectively disable deprecation
warnings.
However, don't do it via CFLAGS option in the makefiles, instead hack it
to "nm-default.h". After all, *every* source file that is for internal
compilation needs to include this header as first.
- All internal source files (except "examples", which are not internal)
should include "config.h" first. As also all internal source
files should include "nm-default.h", let "config.h" be included
by "nm-default.h" and include "nm-default.h" as first in every
source file.
We already wanted to include "nm-default.h" before other headers
because it might contains some fixes (like "nm-glib.h" compatibility)
that is required first.
- After including "nm-default.h", we optinally allow for including the
corresponding header file for the source file at hand. The idea
is to ensure that each header file is self contained.
- Don't include "config.h" or "nm-default.h" in any header file
(except "nm-sd-adapt.h"). Public headers anyway must not include
these headers, and internal headers are never included after
"nm-default.h", as of the first previous point.
- Include all internal headers with quotes instead of angle brackets.
In practice it doesn't matter, because in our public headers we must
include other headers with angle brackets. As we use our public
headers also to compile our interal source files, effectively the
result must be the same. Still do it for consistency.
- Except for <config.h> itself. Include it with angle brackets as suggested by
https://www.gnu.org/software/autoconf/manual/autoconf.html#Configuration-Headers
Up to now, the "include" directory contained (only) header files that were
used project-wide by libs, core, clients, et al.
Since the directory now also contains a non-header file, the "include"
name is misleading. Instead of adding yet another directory that is
project-wide, with non-header-only content, rename the "include"
directory to "shared".
For libnm library, "nm-dbus-interface.h" contains defines like the D-Bus
paths of NetworkManager. It is desirable to have this header usable without
having a dependency on "glib.h", for example for a QT application. For that,
commit c0852964a8 removed that dependancy.
For libnm-glib library, the analog to "nm-dbus-interface.h" is
"NetworkManager.h", and the same applies there. Commit
159e827a72 removed that include.
However, that broke build on PackageKit [1] which expected to get the
version macros by including "NetworkManager.h". So at least for libnm-glib,
we need to preserve old behavior so that a user including
"NetworkManager.h" gets the version macros, but not "glib.h".
Extract the version macros to a new header file "nm-version-macros.h".
This header doesn't include "glib.h" and can be included from
"NetworkManager.h". This gives as previous behavior and a glib-free
include.
For libnm we still don't include "nm-version-macros.h" to "nm-dbus-interface.h".
Very few users will actually need the version macros, but not using
libnm.
Users that use libnm, should just include (libnm's) "NetworkManager.h" to
get all headers.
As a special case, a user who doesn't want to use glib/libnm, but still
needs both "nm-dbus-interface.h" and "nm-version-macros.h", can include
them both separately.
[1] https://github.com/hughsie/PackageKit/issues/85
Fixes: 4545a7fe96
Port remaining bits to gdbus and remove stray dbus-glib references
Drop the dbus-glib version check from configure, since nothing depends
on new dbus-glib any more.
Move nm-dbus-glib-types.h and nm-gvaluearray-compat.h from include/ to
libnm-util/ since they are now only used by libnm-util and libnm-glib.
The localization headers are now included via "nm-default.h".
Also fixes several places, where we wrongly included <glib/gi18n-lib.h>
instead of <glib/gi18n.h>. For example under "clients/" directory.
Rather than randomly including one or more of <glib.h>,
<glib-object.h>, and <gio/gio.h> everywhere (and forgetting to include
"nm-glib-compat.h" most of the time), rename nm-glib-compat.h to
nm-glib.h, include <gio/gio.h> from there, and then change all .c
files in NM to include "nm-glib.h" rather than including the glib
headers directly.
(Public headers files still have to include the real glib headers,
since nm-glib.h isn't installed...)
Also, remove glib includes from header files that are already
including a base object header file (which must itself already include
the glib headers).
A failure to g_return_*() prints a critical warning which contains
G_STRFUNC. Depending on the compiler this contains only the function
name or the entire signature.
Relax the assertion pattern to check the function name.
The function was changed to return NULL instead of empty hash by commit
ad56cfa914. Later, the condition had to be
relaxed for NMSettingGeneric (commit 4d32618264).
Unforfunately, it shows up that there are other use cases that require
presence of a setting (that might have all properties default), such as
NMSettingBridgePort for bridge slave connections.
libnm already behaves this way, since commit
6325c596c0.
https://bugzilla.gnome.org/show_bug.cgi?id=740681
