- cleanup data type and use guint32 consistently. We might want to
introduce a new "infinity" value. But since libnm's
NM_SETTING_IP_CONFIG_DHCP_TIMEOUT asserts against the range
0 - G_MAXINT32, we cannot express it as -1 anyway. So, infinity
will have the numerical value G_MAXINT32, hence guint32 is just
fine.
- make use of existing ipv6.dhcp-timeout setting and add global
default configuration in NetworkManager.conf
- instead of having subclasses call nm_device_set_dhcp_timeout(),
add a virtual function get_dhcp_timeout().
For master devices, instead of ignoring loss of carrier entirely,
handle it.
First of all, master devices are now by default ignore-carrier=yes.
That means, without explict user configuration in NetworkManager.conf,
the previous behavior in carrier_changed() does not change.
If the user decides to configure the master device like
[device-with-carrier]
match-device=type:bond,type:bridge,type:team
ignore-carrier=no
then, master device will disconnect on carrier loss like
regular devices.
https://github.com/NetworkManager/NetworkManager/pull/18
Co-authored-by: Thomas Haller <thaller@redhat.com>
Since commit 2b51d3967 "device: merge branch 'th/device-mtu-bgo777251'",
we always set the MTU for certain device types during activation. Even
if the MTU is neither specified via the connection nor other means, like
DHCP.
Revert that change. On activation, if nothing explicitly configures the
MTU, leave it unchanged. This is like what we do with ethernet's
cloned-mac-address, which has a default value "preserve".
So, as last resort the default value for MTU is now 0 (don't change),
instead of depending on the device type.
Note that you also can override the default value in global
configuration via NetworkManager.conf.
This behavior makes sense, because whenever NM actively resets the MTU,
it remembers the previous value and restores it when deactivating
the connection. That wasn't implemented before 2b51d3967, and the
MTU would depend on which connection was previously active. That
is no longer an issue as the MTU gets reset when deactivating.
https://bugzilla.redhat.com/show_bug.cgi?id=1460760
Commits 39d0559d9a ("platform: sort links by name instead of
ifindex") and 529a0a1a7f ("manager: sort slaves to be autoconnected
by device name") changed the order of activation of slaves. Introduce
a system-wide configuration property to preserve the old behavior.
https://bugzilla.redhat.com/show_bug.cgi?id=1452585
Now that we have a PMF connection property, get rid of the previous
code to globally enable/disable PMF and use the 'ieee80211w'
configuration option for each configured network when the supplicant
supports it.
Otherwise, substitions are not properly expanded.
For example
- "AC_SUBST(nmrundir, '${runstatedir}'/$PACKAGE, [NetworkManager runtime state directory])"
gives ${runstatedir}/NetworkManager/resolv.conf
- "AC_SUBST(nmrundir, "${runstatedir}/$PACKAGE", [NetworkManager runtime state directory])"
gives ${prefix}/var/run/NetworkManager/resolv.conf
The purpose of "rc-manager=symlink" is so that the administrator can point
the "/etc/resolv.conf" as a symlink to a certain file, and thus indicating
that a certain component is responsible to manage resolv.conf, while others
should stay away from it.
For example, systemd-resolved never touches "/etc/resolv.conf", but
expects the admin to setup the symlink appropriately. It also recognizes
whether the symlink points to it's own resolv.conf in /run or to another
component.
Previously, "rc-manager=symlink" would always replace a regular file
with a symlink to "/var/run/NetworkManager/resolv.conf". Only if
"/etc/resolv.conf" is already a symlink somewhere else, NM would not
touch it. This with the exception that if "/etc/resolv.conf" points to
"/var/run/NetworkManager/resolv.conf", it would replace the symlink
with the same link to raise inotify events.
Change behavior so if "/etc/resolv.conf" is already a regular file, keep
it as file.
This means, if you have multiple components that don't care, everybody
can write the "/etc/resolv.conf" (as file) and there is no clear
expressed responsibility.
It was wrong that NetworkManager would convert the file to a symlink,
this should be reserved to the admin. Instead, NetworkManager should
accept that the intent is unspecified and preserve the regular file.
It's up to the admin to replace the symlink to somewhere else (to keep
NM off), or to point it to "/var/run/NetworkManager/resolv.conf", to show
the explicit intent.
The wrong behavior causes dangling symlinks when somebody disables
NetworkManager for good.
https://bugzilla.redhat.com/show_bug.cgi?id=1367551
This allows a user to restore the previous behavior where NetworkManager
would not reconfigure the MTU during device activation, if no MTU is
available (commit "22e8af6 device: set a per-device default MTU on
activation").
Well, not exactly. The previous behavior was to use per-connection
configuration, then DHCP provided value, or finally leave the MTU
unspecified.
Now, we prefer a per-connection configuration, followed by a global
connection default. If "ethernet.mtu=0", the MTU is left unspecified.
In absense of a global connection default, the value from DHCP is used
or finally a per-device-type default. That is effectively 1500 for most
types, except for infiniband where the MTU is still left unspecified.
Usecase: when connecting to a public Wi-Fi with MAC address randomization
("wifi.cloned-mac-address=random") you get on every re-connect a new
IP address due to the changing MAC address.
"wifi.cloned-mac-address=stable" is the solution for that. But that
means, every time when reconnecting to this network, the same ID will
be reused. We want an ID that is stable for a while, but at a later
point a new ID should e generated when revisiting the Wi-Fi network.
Extend the stable-id to become dynamic and support templates/substitutions.
Currently supported is "${CONNECTION}", "${BOOT}" and "${RANDOM}".
Any unrecognized pattern is treated verbaim/untranslated.
"$$" is treated special to allow escaping the '$' character. This allows
the user to still embed verbatim '$' characters with the guarantee that
future versions of NetworkManager will still generate the same ID.
Of course, a user could just avoid '$' in the stable-id unless using
it for dynamic substitutions.
Later we might want to add more recognized substitutions. For example, it
could be useful to generate new IDs based on the current time. The ${} syntax
is extendable to support arguments like "${PERIODIC:weekly}".
Also allow "connection.stable-id" to be set as global default value.
Previously that made no sense because the stable-id was static
and is anyway strongly tied to the identity of the connection profile.
Now, with dynamic stable-ids it gets much more useful to specify
a global default.
Note that pre-existing stable-ids don't change and still generate
the same addresses -- unless they contain one of the new ${} patterns.
nmcli has a heuristic when setting the team-config to accepting both
a filename or the plain json text.
Add support for two schemes "file://" and "json://" to explicitly
determine whether to read from file or from json.
Also, no longer silently ignore an all-whitespace word. That is an
error (unless you have a file named " ").
Also, no longer replace newlines with space. Don't mangle the input
text at all.
It's potentially unexpected by user that dnsmasq works differently
from the libc resolver and doesn't try the servers in order. Add a
paragraph to explain that and how to tweak the resolution order.
Long ago before commit 1b49f94, NetworkManager did not touch the
MAC address at all. Since 0.8.2 NetworkManager would modify the
MAC address, and eventually it would reset the permanent MAC address
of the device.
This prevents a user from externally setting the MAC address via tools
like macchanger and rely on NetworkManager not to reset it to the
permanent MAC address. This is considered a security regression in
bgo#708820.
This only changed with commit 9a354cd and 1.4.0. Since then it is possible
to configure "cloned-mac-address=preserve", which instead uses the "initial"
MAC address when the device activates.
That also changed that the "initial" MAC address is the address which was
externally configured on the device as last. In other words, the
"initial" MAC address is picked up from external changes, unless it
was NetworkManager itself who configured the address when activating a
connection.
However, in absence of an explicit configuration the default for
"cloned-mac-address" is still "permanent". Meaning, the user has to
explicitly configure that NetworkManager should not touch the MAC address.
It makes sense to change the upstream default to "preserve". Although this
is a change in behavior since 0.8.2, it seems a better default.
This change has the drastic effect that all the existing connections
out there with "cloned-mac-address=$(nil)" change behavior after upgrade.
I think most users won't notice, because their devices have the permanent
address set by default anyway. I would think that there are few users
who intentionally configured "cloned-mac-address=" to have NetworkManager
restore the permanent address.
https://bugzilla.gnome.org/show_bug.cgi?id=770611
Without this, it reads:
See the section called “Sections” for details.
but there are multiple sections called “Sections” and it should
explicitly refer to the one from the other top-level section.
With this change, it reads:
See “Sections” under the section called “CONNECTION SECTION” for details.
