Also move the initilization of the instance into the constructed()
method.
NMAgentManager now owns a reference to the DBUS manager and Auth
manager and the dispose() function properly unregisters itself from
both.
Refactor NMInotifyHelper to implement the singleton getter using
NM_DEFINE_SINGLETON_GETTER().
For one this means that the getter no longer increments the reference
count. This was anyway wrong, because no caller of nm_inotify_helper_get()
unrefered the returned reference, hence leaking the singleton.
Also, the getter can no longer fail to create the singleton instance.
Note that none of the callers actually coped with a failure to get
the singleton.
Instead return an instance that does nothing.
One downside (upside?) of this is that we only try once to initialize
the inotify handle.
Also no longer increment the reference count in the getter and
properly disconnect the signals in NMManager:dispose().
Also use the defines for the signal names instead of plain strings.
Deleting routes with metric 0 might end up deleting other
routes with a different metric.
Workaround this in platform to only delete a route with
metric 0 if such a route can be found prior to deletion.
Don't only look into the cache (which might be out of date).
Instead refetch the route we are about to delete to be sure.
There is still a race that we might end up deleting the wrong
route.
https://bugzilla.gnome.org/show_bug.cgi?id=741871https://bugzilla.redhat.com/show_bug.cgi?id=1172780
This match-any behavior ignoring metric is nowhere used. And even if we
would need such a behavior, using 0 is wrong because IPv4 routes can
have a metric of zero.
Handling a route with metric 0 effectively means
a metric of 1024 (user default). Adjust the add(),
delete() and exist() functions to consider routes
with metric 0 as 1024.
This is really a no-op because the directory will be created by
nm_main_utils_check_pidfile() anyway, but make sure the permissions
are synchronized. Now that resolv.conf is symlink into NMRUNDIR,
if normal users don't have permissions to read NMRUNDIR then
DNS won't work.
If a device assumes a connection without activating a user-requested or
NM-requested connection, then disable_ipv6 is not touched. When the device
is deactivated, it still isn't touched even though userspace IPv6LL
is enabled. This could lead to an user-requested activation with
IPv6 configuration, but disable_ipv6=1.
Whenever userspace IPv6LL is turned on, we should also set disable_ipv6=0
to ensure IPv6 can function. Userspace IPv6LL will ensure that the
interface does not have an address until the user/connection requests
it, which was the only reason that NM touched disable_ipv6 anyway.
fixes:NetworkManager_Test203_testcase_286589
fixes:NetworkManager_Test204_testcase_286590
https://bugzilla.gnome.org/show_bug.cgi?id=741773
If an ifcfg file has a DEVTIMEOUT property (and a DEVICE, and is
ONBOOT=yes), and the device is not present at startup, then wait up to
DEVTIMEOUT seconds for it to appear before declaring the connection
ready.
This allows for a hacky workaround to devices that take a bizarrely
long time to be probed.
Add an NMSettingsConnection:ready property, which indicates if the
connection is ready to use. Add NMSettings:startup-complete, which is
TRUE when all connections are ready. Make NMManager:startup-complete
take NMSettings:startup-complete into account.
teamd first adds the link and only then listens on the bus therefore we race
with it. Let's watch for the bus presence even for the teamd devices we didn't
add for all their lifetime and recheck for assumed connections as we see them.
We don't want to start a teamd instance when there's an externally added team
interface. We just don't want to try to the daemon if it's not there (addressed
by a later commit).
This reverts commit a78386b6d1.
Conflicts:
src/devices/team/nm-device-team.c
When specifying '--enable-lto=anything' or '--disable-lto',
the configure script would always set enable_lto=yes.
The only way to disable lto, was *not* specifying the
configure option.
https://bugzilla.gnome.org/show_bug.cgi?id=742575
On the end of the test there should be no unchecked expected
messages. Register a destructor function in nmtst to assert
against that.
Also call nmtst_free() in the destructor. That way, we always release
the allocated data without requiring the test to do it explicitly.
Program received signal SIGSEGV, Segmentation fault.
0x000000000041b3e5 in nmt_page_dsl_constructed (object=0x7fffec0228c0 [NmtPageDsl]) at nmt-page-dsl.c:109
109 priv->ethernet_page = nmt_page_ethernet_new (conn, nmt_editor_page_device_get_device_entry (NMT_EDITOR_PAGE_DEVICE (dsl)));
Missing separate debuginfos, use: debuginfo-install libffi-3.0.10-3.fc18.x86_64 newt-0.52.15-1.fc19.x86_64
(gdb) bt
#0 0x000000000041b3e5 in nmt_page_dsl_constructed (object=0x7fffec0228c0 [NmtPageDsl]) at nmt-page-dsl.c:109
#1 0x0000003e9ac161e3 in g_object_newv (object_type=1, object_type@entry=16203872, n_parameters=n_parameters@entry=2, parameters=parameters@entry=0xf74350)
at gobject.c:1741
#2 0x0000003e9ac16560 in g_object_new_valist (object_type=object_type@entry=16203872, first_property_name=first_property_name@entry=0x42e524 "connection",
var_args=var_args@entry=0x7fffffffcef8) at gobject.c:1830
#3 0x0000003e9ac16894 in g_object_new (object_type=16203872, first_property_name=first_property_name@entry=0x42e524 "connection") at gobject.c:1545
#4 0x000000000041b504 in nmt_page_dsl_new (conn=<optimized out>, deventry=deventry@entry=0x974690 [NmtDeviceEntry]) at nmt-page-dsl.c:47
#5 0x000000000041808e in nmt_editor_constructed (object=<optimized out>) at nmt-editor.c:355
#6 0x0000003e9ac161e3 in g_object_newv (object_type=1, object_type@entry=16174256, n_parameters=n_parameters@entry=4, parameters=parameters@entry=0xf6cec0)
at gobject.c:1741
...
(gdb) p priv
$1 = (NmtPageDslPrivate *) 0x0
No need to allocate a temporary "base" variable. Just
search for the last '/' ourselves.
All the special handling that g_path_get_basename() does,
for example handling empty filenames and removing trailing
slashes, is not needed.
Thereby fix not to return empty names such as from "ifcfg-".
This reverts commit 35988ec633.
Since commit ffe0fde235,
wireless_connection_from_ifcfg() accepts a missing @error argument.
Revert this commit because the caller then can control whether to
log the error by providing @error.
The main motivation for this change is to be able to build configure
command lines that will work for both old and new versions of
NetworkManager.
Acked-By: Thomas Haller <thaller@redhat.com>
NMRemoteSettings queues a bunch of async NMRemoteConnection creations,
but wasn't doing anything to ensure that it was still alive when they
completed. Pointed out by Cosimo Cecchi.
https://bugzilla.gnome.org/show_bug.cgi?id=742138
Merged all session tracking modules into one source file and simplified
it substantially. Now systemd-logind and ConsoleKit support can be built
in at the same time and both are detected at runtime. This is useful on
source based as well as binary distributions.
Original patch written by Fabio Erculiani <lxnay@sabayon.org>, modified
by Pavel Šimerda <psimerda@redhat.com> and Thomas Haller <thaller@redhat.com>.
https://bugzilla.gnome.org/show_bug.cgi?id=686997
Acked-By: Thomas Haller <thaller@redhat.com>
There's no need to call `nm_session_monitor_get()` individually for each
call to `nm_auth_is_subject_in_acl()`.
Acked-By: Thomas Haller <thaller@redhat.com>
