* NetworkManager.h
- Add signals for VPN Launch and Connect failures
* gnome/applet/applet-dbus.c
- (nmwa_dbus_filter): Trap new VPN launch & connect failure signals
* gnome/applet/applet.c
- (nmwa_show_vpn_failure_dialog): generalize old nmwa_show_vpn_login_failure_dialog()
function to handle all VPN failure messages
- (nmwa_schedule_vpn_failure_dialog): generalize old nmwa_schedule_vpn_login_failure_dialog()
function to hanlde all VPN failure messages
- (show_warning_dialog): work around focus-stealing prevention
* gnome/applet/other-network-dialog.c
gnome/applet/passphrase-dialog.c
- (update_button_cb): Make sure the OK button is enabled when it should be, fixes
problem where it never enabled for ASCII Key and Hex Key types
* gnome/applet/wireless-applet.glade
- Add window title to Other Wireless Network Dialog
* src/vpn-manager/nm-dbus-vpn.c
- (nm_dbus_vpn_signal_vpn_failed): generalize old nm_dbus_vpn_signal_vpn_login_failed()
function to handle all VPN failure messages
* src/vpn-manager/nm-vpn-manager.c
- (nm_vpn_manager_process_signal): trap and proxy VPN launch & connect failure signals too
* vpn-daemons/vpnc/nm-vpnc-service.c
- (nm_vpnc_dbus_signal_launch_failed): new function
- (nm_vpnc_dbus_signal_connect_failed): new function
- (nm_vpnc_helper_timer_cb): signal connect failure on timeout
- (vpnc_watch_cb): signal connection failure when vpnc exits with connection failure
- (nm_vpnc_start_vpnc_binary): search a number of locations for vpnc
- (nm_vpnc_dbus_handle_start): send launch failure signal when we fail to launch vpnc
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@627 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Expose activation stages to NetworkManager clients, like the applet
* Add Diana's progress icons to the applet, cued off NM activation stage
* Use more descriptive tooltips, cued off NM activation stage
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@611 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Remove NM_STATE_SCANNING from NetworkManager.h and applet code
* Fix some holes in device activation and retaining the currently connected
access point
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@602 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Merge the applet and the info-daemon, and move the converged
applet under gnome/applet
* Move libnm_glib to gnome/libnm_glib
* Convert most dbus calls between the applet, info-daemon, and NM
into async calls
* Fix a few things valgrind noticed
* Make NM broadcast state more reliably
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@586 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Initial VPN Support
- supports 'vpnc'
- reworks device IP configuration, backend files have changed and will need
to be updated for all distributions. I will try to do what I can for
them, but I cannot test them.
- Move named directory to src/named-manager
- Make backends directory self-contained
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@571 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Tighten up handling of wireless devices that don't support wireless
scanning (ie, Orinoco). Due to restructuring of code, these devices
hadn't been doing pseudo-scanning for a while either and would just
spin waiting for an access point. They are now manual devices where
the user must choose the access point from the menu every time. All
"allowed" access points are listed in the applet's menu regardless
of whether or not they can be seen by the card, since it can't scan
anyway.
* src/NetworkManager.c
- (nm_wireless_link_state_handle): new function, but only update
the "best" ap for non-scanning devices when its not activating,
and when no device is being forced on the card
- (nm_link_state_monitor): split wireless link state handling out
into separate function
* src/NetworkManagerDevice.c
- (nm_device_copy_allowed_to_dev_list): new function
- (nm_device_new): populate non-scanning cards' AP lists with
access points from the "allowed" list
- (nm_device_new): don't start a scanning timeout for devices that
can't scan
- (nm_device_activation_schedule_finish): new parameter, should be
the AP that failed to be connected to, pass it on to the
activation finish function in NetworkManagerPolicy.c
- (nm_device_activate_wireless): don't ever try to get a new AP
for non-scanning devices, just fail. The user must choose
a new access point manually.
- (nm_device_activate): grab the AP that failed connection and
pass it on
- (nm_device_update_best_ap): Clear the best AP if we don't have
a link to it, user must manually choose a new one
- (nm_device_do_pseudo_scan): remove function
- (nm_device_wireless_process_scan_results): remove bits for non-
scanning cards since they never get here
- (nm_device_wireless_scan): remove bits for non-scanning devices,
and fake the scan list for test devices a bit earlier
* src/NetworkManagerPolicy.c
- (nm_policy_activation_finish): use the failed_ap that we get
passed rather than getting the best_ap from the card, which
may have changed since we were scheduled
- (nm_policy_allowed_ap_list_update): for non-scanning devices,
update their scan list directly from the allowed list when
we get updates to the allowed list from NetworkManagerInfo
* src/NetworkManagerPolicy.h
- New member for failed access point in NMActivationResult
-------------------------------------
Driver Notification patch: notifies the user when their driver
sucks. Gives them the option to ignore further insertions
of the card that has the sucky driver.
* NetworkManager.h
- Remove the SEMI_SUPPORTED member from the NMDriverSupportLevel
enum and replace it with NO_CARRIER_DETECT and
NO_WIRELESS_SCAN
* panel-applet/NMWirelessApplet.[ch]
- Merge essid.glade -> wireless-applet.glade
- Implement the "Your driver sucks" notification dialog
* panel-applet/NMWirelessAppletDbus.c
- Change stuff from getSupportsCarrierDetect->getDriverSupportLevel
- Grab hardware address for each device from NM too
- Check whether the driver for each device sucks or not whenever
a new device is noticed
* panel-applet/NMWirelessAppletOtherNetworkDialog.c
- Deal with stuff being in wireless-applet.glade now rather than essid.glade
* src/NetworkManager.c
- Fix a double-unref on device removal
* src/NetworkManagerUtils.c
- Set appropriate driver support level on a device that doesn't
support scanning or carrier detection
* src/nm-dbus-device.c
- New "getHWAddress" dbus method on devices
- getSupportsCarrierDetect -> getDriverSupportLevel
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@534 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Dan Reed: DHCP options D-BUS API
Exposes the DHCP options that a device receives to clients over D-BUS.
* configure.in
- A few cleanups
* dhcpcd/client.h
- Correct names, option length, and types for DHCP options
* dhcpcd/dhcpcd.[ch]
- Clarify function names that access DHCP options & data
* src/NetworkManagerDHCP.c
- Use new DHCP data access functions
* src/NetworkManagerDbus.c
- Message handler for DHCP functions
* src/nm-dbus-dhcp.[ch] (new)
- DHCP dbus methods
* test/nm-dhcp-opt-test.c
- Test DHCP D-BUS API and return all present DHCP options
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@444 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Cache last-known-good wireless authentication method in
NetworkManagerInfo, and use that method first during
wireless device activation. Should speed up devices that
need Shared Key authentication method since Open System is
now the default.
* Remove the hack to not do full activation on wired connections
that are active when we launch, it causes too many problems
with name resolution and was a hack in the first place.
* Re-work wireless device activation again somewhat to have a
clearer chain of events and to use last-known-good
authentication method of the access point. Also provide
better status throughout activation to ensure the applet
can tell the user exactly what's going on.
* Remove the "find wireless network" code and now simply attempt
to activate with that access point. This reduces the delay
between selecting "Other wireless Network" and actually
connecting to that network.
* Correctly stop the device's worker thread when its removed.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@388 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Tom Parker
* Add autoip/Link Local Addressing support when we fail to get a DHCP
address
* Longer pause after setting ESSID on cards that support a larger number
of channels to give the card time to find the right channel
* Add system hook to restart mDNSResponder (or whatever the local implementation
of Multicast DNS is) when we activate interfaces
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@341 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessAppletOtherNetworkDialog.c,
- Disable OK button until valid data is entered
for encryption stuff too
* panel-applet/NMWirelessApplet.c
- Report card strength for current AP if the card
doesn't report strength data for scanned access
points
* src/NetworkManagerDevice.c
- Smooth out cards reported quality, Atmel card was
intermittently reporting no quality data but soon
recovers
* src/NetworkManagerWireless.c
- Better quality data percentage calculation. Atmel
cards (mine at least) seem to report the quality
in percentage format already, so honor that
Patch from <j@bootlab.org>
* NetworkManager.h
info-daemon/NetworkManagerInfoPassphraseDialog.c
info-daemon/passphrase.glade
panel-applet/NMWirelessAppletOtherNetworkDialog.c
panel-applet/essid.glade
src/NetworkManagerAP.c
src/NetworkManagerDevice.c
src/NetworkManagerWireless.[ch]
- Support ASCII WEP keys, in both 40/64 bit and 104/128 bit
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@291 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* NetworkManager.h
- New file, now contains commonly used structures and bits
for the dbus API of NetworkManager
* Makefile.am
- Deliver NetworkManager.h to ${includedir}/NetworkManager
* src/NetworkManager.h
- Rename -> src/NetworkManagerMain.c
* Various fixups all around to use NetworkManager.h and new
src/NetworkManagerMain.h, remove redundant bits that got
moved into NetworkManager.h
* src/NetworkManagerDevice.[ch]
src/NetworkManagerUtils.[ch]
src/NetworkManagerPolicy.c
src/NetworkManagerDbus.c
- Whitelist wireless drivers, and blacklist some wired
drivers. Also blacklist cipsec and ethernet-over-usb
devices at this time (RH #135722, RH #135648)
- Don't leak unsupported devices out over dbus, or allow
them to be set as the active device. Skip over them
during automatic device picking
* test/nmclienttest.c
- Clean up the dbus code a lot
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@261 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
